+@node Windows Files
+@section File Names on MS-Windows
+@cindex file names on MS-Windows
+
+ MS-Windows and MS-DOS normally use a backslash, @samp{\}, to
+separate name units within a file name, instead of the slash used on
+other systems. Emacs on MS-DOS/MS-Windows permits use of either slash or
+backslash, and also knows about drive letters in file names.
+
+@cindex file-name completion, on MS-Windows
+ On MS-DOS/MS-Windows, file names are case-insensitive, so Emacs by
+default ignores letter-case in file names during completion.
+
+@vindex w32-get-true-file-attributes
+ If the variable @code{w32-get-true-file-attributes} is
+non-@code{nil} (the default), Emacs tries to determine the accurate
+link counts for files. This option is only useful on the NT family of
+Windows (2K/XP/2K3), and it considerably slows down Dired and other
+features, so use it only on fast machines.
+
+@node ls in Lisp
+@section Emulation of @code{ls} on MS-Windows
+@cindex Dired, and MS-Windows/MS-DOS
+@cindex @code{ls} emulation
+
+ Dired normally uses the external program @code{ls} (or its close
+work-alike) to produce the directory listing displayed in Dired
+buffers (@pxref{Dired}). However, MS-Windows and MS-DOS systems don't
+come with such a program, although several ports of @sc{gnu} @code{ls}
+are available. Therefore, Emacs on those systems @emph{emulates}
+@code{ls} in Lisp, by using the @file{ls-lisp.el} package. While
+@file{ls-lisp.el} provides a reasonably full emulation of @code{ls},
+there are some options and features peculiar to that emulation;
+@iftex
+for more details, see the documentation of the variables whose names
+begin with @code{ls-lisp}.
+@end iftex
+@ifnottex
+they are described in this section.
+
+ The @code{ls} emulation supports many of the @code{ls} switches, but
+it doesn't support all of them. Here's the list of the switches it
+does support: @option{-A}, @option{-a}, @option{-B}, @option{-C},
+@option{-c}, @option{-i}, @option{-G}, @option{-g}, @option{-R},
+@option{-r}, @option{-S}, @option{-s}, @option{-t}, @option{-U},
+@option{-u}, and @option{-X}. The @option{-F} switch is partially
+supported (it appends the character that classifies the file, but does
+not prevent symlink following).
+
+@vindex ls-lisp-use-insert-directory-program
+ On MS-Windows and MS-DOS, @file{ls-lisp.el} is preloaded when Emacs
+is built, so the Lisp emulation of @code{ls} is always used on those
+platforms. If you have a ported @code{ls}, setting
+@code{ls-lisp-use-insert-directory-program} to a non-@code{nil} value
+will revert to using an external program named by the variable
+@code{insert-directory-program}.
+
+@vindex ls-lisp-ignore-case
+ By default, @file{ls-lisp.el} uses a case-sensitive sort order for
+the directory listing it produces; this is so the listing looks the
+same as on other platforms. If you wish that the files be sorted in
+case-insensitive order, set the variable @code{ls-lisp-ignore-case} to
+a non-@code{nil} value.
+
+@vindex ls-lisp-dirs-first
+ By default, files and subdirectories are sorted together, to emulate
+the behavior of @code{ls}. However, native MS-Windows/MS-DOS file
+managers list the directories before the files; if you want that
+behavior, customize the option @code{ls-lisp-dirs-first} to a
+non-@code{nil} value.
+
+@vindex ls-lisp-verbosity
+ The variable @code{ls-lisp-verbosity} controls the file attributes
+that @file{ls-lisp.el} displays. The value should be a list that
+contains one or more of the symbols @code{links}, @code{uid}, and
+@code{gid}. @code{links} means display the count of different file
+names that are associated with (a.k.a.@: @dfn{links to}) the file's
+data. @code{uid} means display the numerical identifier of the user
+who owns the file. @code{gid} means display the numerical identifier
+of the file owner's group. The default value is @code{(links uid gid)}
+i.e.@: all the 3 optional attributes are displayed.
+
+@vindex ls-lisp-emulation
+ The variable @code{ls-lisp-emulation} controls the flavour of the
+@code{ls} emulation by setting the defaults for the 3 options
+described above: @code{ls-lisp-ignore-case},
+@code{ls-lisp-dirs-first}, and @code{ls-lisp-verbosity}. The value of
+this option can be one of the following symbols:
+
+@table @code
+@item GNU
+@itemx nil
+Emulate @sc{gnu} systems; this is the default. This sets
+@code{ls-lisp-ignore-case} and @code{ls-lisp-dirs-first} to
+@code{nil}, and @code{ls-lisp-verbosity} to @code{(links uid gid)}.
+@item UNIX
+Emulate Unix systems. Like @code{GNU}, but sets
+@code{ls-lisp-verbosity} to @code{(links uid)}.
+@item MacOS
+Emulate MacOS. Sets @code{ls-lisp-ignore-case} to @code{t}, and
+@code{ls-lisp-dirs-first} and @code{ls-lisp-verbosity} to @code{nil}.
+@item MS-Windows
+Emulate MS-Windows. Sets @code{ls-lisp-ignore-case} and
+@code{ls-lisp-dirs-first} to @code{t}, and @code{ls-lisp-verbosity} to
+@code{(links)} on Windows NT/2K/XP/2K3 and to @code{nil} on Windows 9X.
+Note that the default emulation is @emph{not} @code{MS-Windows}, even
+on Windows, since many users of Emacs on those platforms prefer the
+@sc{gnu} defaults.
+@end table
+
+@noindent
+Any other value of @code{ls-lisp-emulation} means the same as
+@code{GNU}. Note that this option needs to be set @emph{before}
+@file{ls-lisp.el} is loaded, which means that on MS-Windows and MS-DOS
+you will have to set the value from your @file{.emacs} file and then
+restart Emacs, since @file{ls-lisp.el} is preloaded.
+
+@vindex ls-lisp-support-shell-wildcards
+ The variable @code{ls-lisp-support-shell-wildcards} controls how
+file-name patterns are supported: if it is non-@code{nil} (the
+default), they are treated as shell-style wildcards; otherwise they
+are treated as Emacs regular expressions.
+@end ifnottex
+
+@node Windows HOME
+@section HOME Directory on MS-Windows
+@cindex @code{HOME} directory on MS-Windows
+
+ The Windows equivalent of the @code{HOME} directory is the
+@dfn{user-specific application data directory}. The actual location
+depends on your Windows version and system configuration; typical values
+are @file{C:\Documents and Settings\@var{username}\Application Data} on
+Windows 2K/XP and later, and either @file{C:\WINDOWS\Application Data}
+or @file{C:\WINDOWS\Profiles\@var{username}\Application Data} on the
+older Windows 9X/ME systems.
+
+@cindex init file @file{.emacs} on MS-Windows
+ The home directory is where your init file @file{.emacs} is stored.
+When Emacs starts, it first checks whether the environment variable
+@env{HOME} is set. If it is, it looks for the init file in the
+directory pointed by @env{HOME}. If @env{HOME} is not defined, Emacs
+checks for an existing @file{.emacs} file in @file{C:\}, the root
+directory of drive @file{C:}@footnote{
+The check in @file{C:\} is in preference to the application data
+directory for compatibility with older versions of Emacs, which didn't
+check the application data directory.
+}. If there's no such file in @file{C:\}, Emacs next uses the Windows
+system calls to find out the exact location of your application data
+directory. If that fails as well, Emacs falls back to @file{C:\}.
+
+ Whatever the final place is, Emacs sets the value of the @env{HOME}
+environment variable to point to it, and it will use that location for
+other files and directories it normally creates in the user's home
+directory.
+
+ You can always find out where Emacs thinks is your home directory's
+location by typing @kbd{C-x d ~/ @key{RET}}. This should present the
+list of files in the home directory, and show its full name on the
+first line. Likewise, to visit your init file, type @kbd{C-x C-f
+~/.emacs @key{RET}}.
+
+@cindex @file{_emacs} init file, MS-Windows
+ Because MS-DOS does not allow file names with leading dots, and
+because older Windows systems made it hard to create files with such
+names, the Windows port of Emacs supports an alternative name
+@file{_emacs} as a fallback, if such a file exists in the home
+directory, whereas @file{.emacs} does not.
+
+@node Windows Keyboard
+@section Keyboard Usage on MS-Windows
+@cindex keyboard, MS-Windows
+
+ This section describes the Windows-specific features related to
+keyboard input in Emacs.
+
+@kindex F10 @r{(MS-Windows)}
+@cindex menu bar access using keyboard @r{(MS-Windows)}
+ The @key{F10} key on Windows activates the menu bar in a way that
+makes it possible to use the menus without a mouse. In this mode, the
+arrow keys traverse the menus, @key{RET} selects a highlighted menu
+item, and @key{ESC} closes the menu.
+
+@iftex
+@inforef{Windows Keyboard, , emacs}, for information about additional
+Windows-specific variables in this category.
+@end iftex
+@ifnottex
+@vindex w32-alt-is-meta
+@cindex @code{Alt} key (MS-Windows)
+ By default, the key labeled @key{Alt} is mapped as the @key{META}
+key. If you wish it to produce the @code{Alt} modifier instead, set
+the variable @code{w32-alt-is-meta} to a @code{nil} value.
+
+@vindex w32-capslock-is-shiftlock
+ By default, the @key{CapsLock} key only affects normal character
+keys (it converts lower-case characters to their upper-case
+variants). However, if you set the variable
+@code{w32-capslock-is-shiftlock} to a non-@code{nil} value, the
+@key{CapsLock} key will affect non-character keys as well, as if you
+pressed the @key{Shift} key while typing the non-character key.
+
+@vindex w32-enable-caps-lock
+ If the variable @code{w32-enable-caps-lock} is set to a @code{nil}
+value, the @key{CapsLock} key produces the symbol @code{capslock}
+instead of the shifted version of they keys. The default value is
+@code{t}.
+
+@vindex w32-enable-num-lock
+@cindex keypad keys (MS-Windows)
+ Similarly, if @code{w32-enable-num-lock} is @code{nil}, the
+@key{NumLock} key will produce the symbol @code{kp-numlock}. The
+default is @code{t}, which causes @key{NumLock} to work as expected:
+toggle the meaning of the keys on the numeric keypad.
+@end ifnottex
+
+@vindex w32-apps-modifier
+ The variable @code{w32-apps-modifier} controls the effect of the
+@key{Apps} key (usually located between the right @key{Alt} and the
+right @key{Ctrl} keys). Its value can be one of the symbols
+@code{hyper}, @code{super}, @code{meta}, @code{alt}, @code{control},
+or @code{shift} for the respective modifier, or @code{nil} to appear
+as the key @code{apps}. The default is @code{nil}.
+
+@vindex w32-lwindow-modifier
+@vindex w32-rwindow-modifier
+@vindex w32-scroll-lock-modifier
+ The variable @code{w32-lwindow-modifier} determines the effect of
+the left Windows key (usually labeled with @key{start} and the Windows
+logo). If its value is @code{nil} (the default), the key will produce
+the symbol @code{lwindow}. Setting it to one of the symbols
+@code{hyper}, @code{super}, @code{meta}, @code{alt}, @code{control},
+or @code{shift} will produce the respective modifier. A similar
+variable @code{w32-rwindow-modifier} controls the effect of the right
+Windows key, and @code{w32-scroll-lock-modifier} does the same for the
+@key{ScrLock} key. If these variables are set to @code{nil}, the
+right Windows key produces the symbol @code{rwindow} and @key{ScrLock}
+produces the symbol @code{scroll}.
+
+@vindex w32-pass-alt-to-system
+@cindex Windows system menu
+@cindex @code{Alt} key invokes menu (Windows)
+ Emacs compiled as a native Windows application normally turns off
+the Windows feature that tapping the @key{ALT} key invokes the Windows
+menu. The reason is that the @key{ALT} serves as @key{META} in Emacs.
+When using Emacs, users often press the @key{META} key temporarily and
+then change their minds; if this has the effect of bringing up the
+Windows menu, it alters the meaning of subsequent commands. Many
+users find this frustrating.
+
+ You can re-enable Windows' default handling of tapping the @key{ALT}
+key by setting @code{w32-pass-alt-to-system} to a non-@code{nil}
+value.
+
+@ifnottex
+@vindex w32-pass-lwindow-to-system
+@vindex w32-pass-rwindow-to-system
+ The variables @code{w32-pass-lwindow-to-system} and
+@code{w32-pass-rwindow-to-system} determine whether the respective
+keys are passed to Windows or swallowed by Emacs. If the value is
+@code{nil}, the respective key is silently swallowed by Emacs,
+otherwise it is passed to Windows. The default is @code{t} for both
+of these variables. Passing each of these keys to Windows produces
+its normal effect: for example, @kbd{@key{Lwindow}} opens the
+@code{Start} menu, etc.
+
+@vindex w32-recognize-altgr
+@kindex AltGr @r{(MS-Windows)}
+@cindex AltGr key (MS-Windows)
+ The variable @code{w32-recognize-altgr} controls whether the right
+@key{Alt} and left @key{Ctrl} keys are recognized as the @key{AltGr}
+key. The default is @code{t}, which means these keys produce
+@code{AltGr}; setting them to @code{nil} causes these keys to be
+interpreted normally (as the respective modifiers).
+@end ifnottex
+
+@node Windows Mouse
+@section Mouse Usage on MS-Windows
+@cindex mouse, and MS-Windows
+
+ This section describes the Windows-specific variables related to
+mouse.
+
+@vindex w32-mouse-button-tolerance
+@cindex simulation of middle mouse button
+ The variable @code{w32-mouse-button-tolerance} specifies the
+time interval, in milliseconds, for faking middle mouse button press
+on 2-button mice. If both mouse buttons are depressed within this
+time interval, Emacs generates a middle mouse button click event
+instead of a double click on one of the buttons.
+
+@vindex w32-pass-extra-mouse-buttons-to-system
+ If the variable @code{w32-pass-extra-mouse-buttons-to-system} is
+non-@code{nil}, Emacs passes the fourth and fifth mouse buttons to
+Windows.
+
+@vindex w32-swap-mouse-buttons
+ The variable @code{w32-swap-mouse-buttons} controls which of the 3
+mouse buttons generates the @kbd{mouse-2} events. When it is
+@code{nil} (the default), the middle button generates @kbd{mouse-2}
+and the right button generates @kbd{mouse-3} events. If this variable
+is non-@code{nil}, the roles of these two buttons are reversed.
+
+@node Windows Processes
+@section Subprocesses on Windows 9X/ME and Windows NT/2K/XP
+@cindex subprocesses on MS-Windows
+
+@cindex DOS applications, running from Emacs
+ Emacs compiled as a native Windows application (as opposed to the DOS
+version) includes full support for asynchronous subprocesses.
+In the Windows version, synchronous and asynchronous subprocesses work
+fine on both
+Windows 9X/ME and Windows NT/2K/XP as long as you run only 32-bit Windows
+applications. However, when you run a DOS application in a subprocess,
+you may encounter problems or be unable to run the application at all;
+and if you run two DOS applications at the same time in two
+subprocesses, you may have to reboot your system.
+
+Since the standard command interpreter (and most command line utilities)
+on Windows 9X are DOS applications, these problems are significant when
+using that system. But there's nothing we can do about them; only
+Microsoft can fix them.
+
+If you run just one DOS application subprocess, the subprocess should
+work as expected as long as it is ``well-behaved'' and does not perform
+direct screen access or other unusual actions. If you have a CPU
+monitor application, your machine will appear to be 100% busy even when
+the DOS application is idle, but this is only an artifact of the way CPU
+monitors measure processor load.
+
+You must terminate the DOS application before you start any other DOS
+application in a different subprocess. Emacs is unable to interrupt or
+terminate a DOS subprocess. The only way you can terminate such a
+subprocess is by giving it a command that tells its program to exit.
+
+If you attempt to run two DOS applications at the same time in separate
+subprocesses, the second one that is started will be suspended until the
+first one finishes, even if either or both of them are asynchronous.
+
+@cindex kill DOS application
+If you can go to the first subprocess, and tell it to exit, the second
+subprocess should continue normally. However, if the second subprocess
+is synchronous, Emacs itself will be hung until the first subprocess
+finishes. If it will not finish without user input, then you have no
+choice but to reboot if you are running on Windows 9X. If you are
+running on Windows NT/2K/XP, you can use a process viewer application to kill
+the appropriate instance of NTVDM instead (this will terminate both DOS
+subprocesses).
+
+If you have to reboot Windows 9X in this situation, do not use the
+@code{Shutdown} command on the @code{Start} menu; that usually hangs the
+system. Instead, type @kbd{CTL-ALT-@key{DEL}} and then choose
+@code{Shutdown}. That usually works, although it may take a few minutes
+to do its job.