-;;; face-remap.el --- Functions for managing `face-remapping-alist'
+;;; face-remap.el --- Functions for managing `face-remapping-alist' -*- lexical-binding: t -*-
;;
-;; Copyright (C) 2008-2011 Free Software Foundation, Inc.
+;; Copyright (C) 2008-2013 Free Software Foundation, Inc.
;;
;; Author: Miles Bader <miles@gnu.org>
;; Keywords: faces, face remapping, display, user commands
;;;###autoload
(defun face-remap-add-relative (face &rest specs)
"Add a face remapping entry of FACE to SPECS in the current buffer.
-
-Return a cookie which can be used to delete the remapping with
+Return a cookie which can be used to delete this remapping with
`face-remap-remove-relative'.
-SPECS can be any value suitable for the `face' text property,
-including a face name, a list of face names, or a face-attribute
-property list. The attributes given by SPECS will be merged with
-any other currently active face remappings of FACE, and with the
-global definition of FACE. An attempt is made to sort multiple
-entries so that entries with relative face-attributes are applied
-after entries with absolute face-attributes.
-
-The base (lowest priority) remapping may be set to a specific
-value, instead of the default of the global face definition,
-using `face-remap-set-base'."
+The remaining arguments, SPECS, should form a list of faces.
+Each list element should be either a face name or a property list
+of face attribute/value pairs. If more than one face is listed,
+that specifies an aggregate face, in the same way as in a `face'
+text property, except for possible priority changes noted below.
+
+The face remapping specified by SPECS takes effect alongside the
+remappings from other calls to `face-remap-add-relative' for the
+same FACE, as well as the normal definition of FACE (at lowest
+priority). This function tries to sort multiple remappings for
+the same face, so that remappings specifying relative face
+attributes are applied after remappings specifying absolute face
+attributes.
+
+The base (lowest priority) remapping may be set to something
+other than the normal definition of FACE via `face-remap-set-base'."
(while (and (consp specs) (null (cdr specs)))
(setq specs (car specs)))
(make-local-variable 'face-remapping-alist)
(when (null entry)
(setq entry (list face face)) ; explicitly merge with global def
(push entry face-remapping-alist))
- (setcdr entry (face-remap-order (cons specs (cdr entry))))
+ (let ((faces (cdr entry)))
+ (if (symbolp faces)
+ (setq faces (list faces)))
+ (setcdr entry (face-remap-order (cons specs faces))))
(cons face specs)))
(defun face-remap-remove-relative (cookie)
;;;###autoload
(defun face-remap-reset-base (face)
- "Set the base remapping of FACE to inherit from FACE's global definition."
+ "Set the base remapping of FACE to the normal definition of FACE.
+This causes the remappings specified by `face-remap-add-relative'
+to apply on top of the normal definition of FACE."
(let ((entry (assq face face-remapping-alist)))
(when entry
;; If there's nothing except a base remapping, we simply remove
;;;###autoload
(defun face-remap-set-base (face &rest specs)
"Set the base remapping of FACE in the current buffer to SPECS.
-If SPECS is empty, the default base remapping is restored, which
-inherits from the global definition of FACE; note that this is
-different from SPECS containing a single value `nil', which does
-not inherit from the global definition of FACE."
+This causes the remappings specified by `face-remap-add-relative'
+to apply on top of the face specification given by SPECS.
+
+The remaining arguments, SPECS, should form a list of faces.
+Each list element should be either a face name or a property list
+of face attribute/value pairs, like in a `face' text property.
+
+If SPECS is empty, call `face-remap-reset-base' to use the normal
+definition of FACE as the base remapping; note that this is
+different from SPECS containing a single value `nil', which means
+not to inherit from the global definition of FACE at all."
(while (and (consp specs) (not (null (car specs))) (null (cdr specs)))
(setq specs (car specs)))
(if (or (null specs)
(define-minor-mode text-scale-mode
"Minor mode for displaying buffer text in a larger/smaller font.
+With a prefix argument ARG, enable the mode if ARG is positive,
+and disable it otherwise. If called from Lisp, enable the mode
+if ARG is omitted or nil.
The amount of scaling is determined by the variable
`text-scale-mode-amount': one step scales the global default
;;;###autoload (define-key ctl-x-map [(control ?0)] 'text-scale-adjust)
;;;###autoload
(defun text-scale-adjust (inc)
- "Increase or decrease the height of the default face in the current buffer.
+ "Adjust the height of the default face by INC.
+
+INC may be passed as a numeric prefix argument.
The actual adjustment made depends on the final component of the
key-binding used to invoke the command, with all modifiers removed:
- Decrease the default face height by one step
0 Reset the default face height to the global default
-Then, continue to read input events and further adjust the face
-height as long as the input event read (with all modifiers removed)
-is one of the above.
+When adjusting with `+' or `-', continue to read input events and
+further adjust the face height as long as the input event read
+\(with all modifiers removed) is `+' or `-'.
+
+When adjusting with `0', immediately finish.
Each step scales the height of the default face by the variable
`text-scale-mode-step' (a negative number of steps decreases the
a top-level keymap, `text-scale-increase' or
`text-scale-decrease' may be more appropriate."
(interactive "p")
- (let ((first t)
- (step t)
- (ev last-command-event)
+ (let ((ev last-command-event)
(echo-keystrokes nil))
- (while step
- (let ((base (event-basic-type ev)))
- (cond ((or (eq base ?+) (eq base ?=))
- (setq step inc))
- ((eq base ?-)
- (setq step (- inc)))
- ((eq base ?0)
- (setq step 0))
- (first
- (setq step inc))
- (t
- (setq step nil))))
- (when step
- (text-scale-increase step)
- (setq inc 1 first nil)
- (setq ev (read-event "+,-,0 for further adjustment: "))))
- (push ev unread-command-events)))
+ (let* ((base (event-basic-type ev))
+ (step
+ (pcase base
+ ((or ?+ ?=) inc)
+ (?- (- inc))
+ (?0 0)
+ (t inc))))
+ (text-scale-increase step)
+ ;; (unless (zerop step)
+ (message "Use +,-,0 for further adjustment")
+ (set-temporary-overlay-map
+ (let ((map (make-sparse-keymap)))
+ (dolist (mods '(() (control)))
+ (dolist (key '(?- ?+ ?= ?0)) ;; = is often unshifted +.
+ (define-key map (vector (append mods (list key)))
+ (lambda () (interactive) (text-scale-adjust (abs inc))))))
+ map))))) ;; )
\f
;; ----------------------------------------------------------------
;;;###autoload
(define-minor-mode buffer-face-mode
"Minor mode for a buffer-specific default face.
-When enabled, the face specified by the variable
-`buffer-face-mode-face' is used to display the buffer text."
+With a prefix argument ARG, enable the mode if ARG is positive,
+and disable it otherwise. If called from Lisp, enable the mode
+if ARG is omitted or nil. When enabled, the face specified by the
+variable `buffer-face-mode-face' is used to display the buffer text."
:lighter " BufFace"
(when buffer-face-mode-remapping
(face-remap-remove-relative buffer-face-mode-remapping))
;;;###autoload
(defun buffer-face-set (&rest specs)
"Enable `buffer-face-mode', using face specs SPECS.
-SPECS can be any value suitable for the `face' text property,
-including a face name, a list of face names, or a face-attribute
-If SPECS is nil, then `buffer-face-mode' is disabled.
-
-This function will make the variable `buffer-face-mode-face'
-buffer local, and set it to FACE."
+Each argument in SPECS should be a face, i.e. either a face name
+or a property list of face attributes and values. If more than
+one face is listed, that specifies an aggregate face, like in a
+`face' text property. If SPECS is nil or omitted, disable
+`buffer-face-mode'.
+
+This function makes the variable `buffer-face-mode-face' buffer
+local, and sets it to FACE."
(interactive (list (read-face-name "Set buffer face")))
(while (and (consp specs) (null (cdr specs)))
(setq specs (car specs)))
;;;###autoload
(defun buffer-face-toggle (&rest specs)
"Toggle `buffer-face-mode', using face specs SPECS.
-SPECS can be any value suitable for the `face' text property,
-including a face name, a list of face names, or a face-attribute
+Each argument in SPECS should be a face, i.e. either a face name
+or a property list of face attributes and values. If more than
+one face is listed, that specifies an aggregate face, like in a
+`face' text property.
If `buffer-face-mode' is already enabled, and is currently using
the face specs SPECS, then it is disabled; if buffer-face-mode is
ARG controls whether the mode is enabled or disabled, and is
interpreted in the usual manner for minor-mode commands.
-SPECS can be any value suitable for the `face' text property,
-including a face name, a list of face names, or a face-attribute
+SPECS can be any value suitable for a `face' text property,
+including a face name, a plist of face attributes and values, or
+a list of faces.
-If INTERACTIVE is non-nil, a message will be displayed describing the result.
+If INTERACTIVE is non-nil, display a message describing the
+result.
This is a wrapper function which calls `buffer-face-set' or
`buffer-face-toggle' (depending on ARG), and prints a status