% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2002-06-04.06}
+\def\texinfoversion{2005-08-10.17}
%
-% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,
-% 2000, 01, 02 Free Software Foundation, Inc.
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994,
+% 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+% 2005 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software; you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
%
% You should have received a copy of the GNU General Public License
% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
+% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+% Boston, MA 02110-1301, USA.
%
% In other words, you are welcome to use, share and improve this program.
% You are forbidden to forbid anyone else to use, share and improve
% ftp://tug.org/tex/texinfo.tex
% (and all CTAN mirrors, see http://www.ctan.org),
% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-%
+%
% The texinfo.tex in any given Texinfo distribution could well be out
% of date, so if that's what you're using, please check.
-%
+%
% Texinfo has a small home page at http://texinfo.org/ and also
% http://www.gnu.org/software/texinfo.
%
% add check for \lastpenalty to plain's definitions. If the last thing
% we did was a \nobreak, we don't want to insert more space.
-%
+%
\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
\removelastskip\penalty-50\smallskip\fi\fi}
\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
% @inmargin{TEXT [, RIGHT-TEXT]}
% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
% else use TEXT for both).
-%
+%
\def\inmargin#1{\parseinmargin #1,,\finish}
\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
- \setbox0 = \hbox{\ignorespaces #2}%
+ \setbox0 = \hbox{\ignorespaces #2}%
\ifdim\wd0 > 0pt
\def\lefttext{#1}% have both texts
\def\righttext{#2}%
% @paragraphindent NCHARS
% We'll use ems for NCHARS, close enough.
% We cannot implement @paragraphindent asis, though.
-%
+%
\def\asisword{asis} % no translation, these are keywords
\def\noneword{none}
%
% We don't use $'s directly in the definition of \math because we need
% to set catcodes according to plain TeX first, to allow for subscripts,
% superscripts, special math chars, etc.
-%
+%
% @math does not do math typesetting in section titles, index
% entries, and other such contexts where the catcodes are set before
% @math gets a chance to work. This could perhaps be fixed, but for now
% an actual _ character, as in @math{@var{some_variable} + 1}. So make
% _ within @math be active (mathcode "8000), and distinguish by seeing
% if the current family is \slfam, which is what @var uses.
-%
+%
{\catcode95 = \active % 95 = _
\gdef\mathunderscore{%
\catcode95=\active
% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
% this is not advertised and we don't care. Texinfo does not
% otherwise define @\.
-%
+%
% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
%
\def\pdfmakeoutlines{{%
\openin 1 \jobname.toc
\ifeof 1\else\begingroup
- \closein 1
+ \closein 1
\indexnofonts
\def\tt{}
\let\_ = \normalunderscore
- % Thanh's hack / proper braces in bookmarks
+ % Thanh's hack / proper braces in bookmarks
\edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
\edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
%
\let\nextmakelinks=\makelinks
\ifnum\lnkcount>0,\fi
\picknum{#1}%
- \startlink attr{/Border [0 0 0]}
+ \startlink attr{/Border [0 0 0]}
goto name{\pdfmkpgn{\the\pgn}}%
\linkcolor #1%
\advance\lnkcount by 1%
\ifx\first0\adn0
\else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
\else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
- \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+ \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
\else
\ifnum0=\countA\else\makelink\fi
\ifx\first.\let\next=\done\else
% rms does not like angle brackets --karl, 17may97.
% So now @email is just like @uref, unless we are pdf.
-%
+%
%\def\email#1{\angleleft{\tt #1}\angleright}
\ifpdf
\def\email#1{\doemail#1,,\finish}
% @synindex foo bar makes index foo feed into index bar.
% Do this instead of @defindex foo if you don't want it as a separate index.
-%
+%
% @syncodeindex foo bar similar, but put all entries made for index foo
% inside @code.
-%
+%
\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
% Take care of texinfo commands likely to appear in an index entry.
% (Must be a way to avoid doing expansion at all, and thus not have to
% laboriously list every single command here.)
-%
+%
\def\indexdummies{%
\def\ { }%
\def\@{@}% change to @@ when we switch to @ as escape char in aux files.
% Need these in case \tex is in effect and \{ is a \delimiter again.
% But can't use \lbracecmd and \rbracecmd because texindex assumes
-% braces and backslashes are used only as delimiters.
+% braces and backslashes are used only as delimiters.
\let\{ = \mylbrace
\let\} = \myrbrace
\def\_{{\realbackslash _}}%
\def\r##1{\realbackslash r {##1}}%
%
\def\TeX{\realbackslash TeX}%
+\def\LaTeX{\realbackslash LaTeX}%
\def\acronym##1{\realbackslash acronym {##1}}%
\def\cite##1{\realbackslash cite {##1}}%
\def\code##1{\realbackslash code {##1}}%
\wd0=\hsize \wd2=\hsize
\hbox to\pagewidth{\box0\hfil\box2}%
}
-%
+%
% All done with double columns.
\def\enddoublecolumns{%
\output = {%
% @foo ... @end foo.
% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
+%
% Since these characters are used in examples, it should be an even number of
% \tt widths. Each \tt character is 1en, so two makes it 1em.
%
% The @error{} command.
% Adapted from the TeXbook's \boxit.
-%
+%
\newbox\errorbox
%
{\tentt \global\dimen0 = 3em}% Width of the box.
% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
+% If we want to allow any <char> as delimiter,
% we need the curly braces so that makeinfo sees the @verb command, eg:
% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
%
\everypar{\starttabbox}%
}
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters. Before first delimiter expect a
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters. Before first delimiter expect a
% right brace, after last delimiter expect closing brace:
%
% \def\doverb'{'<char>#1<char>'}'{#1}
%
% \def\doverbatim#1@end verbatim{#1}
%
-% For Texinfo it's a lot easier than for LaTeX,
+% For Texinfo it's a lot easier than for LaTeX,
% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
% we need not redefine '\', '{' and '}'
%
% @copying ... @end copying.
% Save the text away for @insertcopying later.
-%
+%
\newbox\copyingbox
%
\def\copying{\begingroup
}
% @insertcopying.
-%
+%
\def\insertcopying{\unvcopy\copyingbox}
% #1 is the \E... control sequence to end the definition (which we define).
% #2 is the \...x control sequence (which our caller defines).
% #3 is the control sequence to process the header, such as \defunheader.
-%
+%
\def\parsebodycommon#1#2#3{%
\begingroup\inENV
% If there are two @def commands in a row, we'll have a \nobreak,
% to account for this both in the \...x definition and in parsing the
% input at hand. Thus also need a control sequence (passed as #5) for
% the \E... definition to assign the category name to.
-%
+%
\def\deftypeopparsebody#1#2#3#4#5 #6 {%
\parsebodycommon{#1}{#2}{#3}%
\def#2##1 ##2 ##3 {%
% These definitions are used if you use @defunx (etc.)
% anywhere other than immediately after a @defun or @defunx.
-%
+%
\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
\nobreak\bigskip
% Usually we'll have text after the image which will insert
% \parskip glue, so insert it here too to equalize the space
- % above and below.
+ % above and below.
\nobreak\vskip\parskip
\nobreak
\line\bgroup\hss
}
% Use `small' versions.
-%
+%
\def\smallenvironments{%
\let\smalldisplay = \smalldisplayx
\let\smallexample = \smalllispx
% Say @foo, not \foo, in error messages.
@escapechar = `@@
-% These look ok in all fonts, so just make them not special.
+% These look ok in all fonts, so just make them not special.
@catcode`@& = @other
@catcode`@# = @other
@catcode`@% = @other
@c time-stamp-format: "%:y-%02m-%02d.%02H"
@c time-stamp-end: "}"
@c End:
+
+@ignore
+ arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore