Progress towards allowing installation in directories with whitespace

[gnu-emacs] / doc / lispintro / Makefile.in

diff --git a/doc/lispintro/Makefile.in b/doc/lispintro/Makefile.in
index 338b4ad86c4a36ebc7eb4661ffc3404333417f40..9a643c004ed8ff72f634ef7577e2107cc5682e53 100644 (file)
--- a/doc/lispintro/Makefile.in
+++ b/doc/lispintro/Makefile.in
@@ -1,4 +1,4 @@
-#### Makefile for the Emacs Lisp Introduction manual
+### @configure_input@
 
 # Copyright (C) 1994-1999, 2001-2013 Free Software Foundation, Inc.
 
@@ -17,8 +17,10 @@
 # You should have received a copy of the GNU General Public License
 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
 
-SHELL = /bin/sh
+SHELL = @SHELL@
 
+# NB If you add any more configure variables,
+# update the sed rules in the dist target below.
 srcdir = @srcdir@
 version=@version@
 
@@ -28,12 +30,29 @@ texinfodir = $(srcdir)/../misc
 # Directory with emacsver.texi.
 emacsdir =  $(srcdir)/../emacs
 
+prefix = @prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+docdir = @docdir@
+dvidir = @dvidir@
+htmldir = @htmldir@
+pdfdir = @pdfdir@
+psdir = @psdir@
+
 MKDIR_P = @MKDIR_P@
 
+GZIP_PROG = @GZIP_PROG@
+
+HTML_OPTS = --no-split --html
+
 INFO_EXT=@INFO_EXT@
 # Options used only when making info output.
 INFO_OPTS=@INFO_OPTS@
 
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
 MAKEINFO = @MAKEINFO@
 MAKEINFO_OPTS = --force -I $(emacsdir) -I $(srcdir)
 TEXI2DVI = texi2dvi
@@ -43,6 +62,11 @@ DVIPS = dvips
 ENVADD = TEXINPUTS="$(srcdir):$(texinfodir):$(emacsdir):$(TEXINPUTS)" \
          MAKEINFO="$(MAKEINFO) $(MAKEINFO_OPTS)"
 
+DVI_TARGETS = emacs-lisp-intro.dvi
+HTML_TARGETS = emacs-lisp-intro.html
+PDF_TARGETS = emacs-lisp-intro.pdf
+PS_TARGETS = emacs-lisp-intro.ps
+
 mkinfodir = @${MKDIR_P} ${buildinfodir}
 
 srcs = ${srcdir}/emacs-lisp-intro.texi ${srcdir}/doclicense.texi \
@@ -50,12 +74,17 @@ srcs = ${srcdir}/emacs-lisp-intro.texi ${srcdir}/doclicense.texi \
 
 .PHONY: info dvi html pdf ps
 
+.SUFFIXES: .ps .dvi
+
+.dvi.ps:
+       $(DVIPS) -o $@ $<
+
 info: ${buildinfodir}/eintr$(INFO_EXT)
 
-dvi: emacs-lisp-intro.dvi
-html: emacs-lisp-intro.html
-pdf: emacs-lisp-intro.pdf
-ps: emacs-lisp-intro.ps
+dvi: $(DVI_TARGETS)
+html: $(HTML_TARGETS)
+pdf: $(PDF_TARGETS)
+ps: $(PS_TARGETS)
 
 # The file name eintr must fit within 5 characters, to allow for
 # -NN extensions to fit into DOS 8+3 limits without clashing.
@@ -67,14 +96,11 @@ ${buildinfodir}/eintr$(INFO_EXT): ${srcs}
 emacs-lisp-intro.dvi: ${srcs}
        $(ENVADD) $(TEXI2DVI) ${srcdir}/emacs-lisp-intro.texi
 
-emacs-lisp-intro.ps: emacs-lisp-intro.dvi
-       $(DVIPS) -o $@ emacs-lisp-intro.dvi
-
 emacs-lisp-intro.pdf: ${srcs}
        $(ENVADD) $(TEXI2PDF) ${srcdir}/emacs-lisp-intro.texi
 
 emacs-lisp-intro.html: ${srcs}
-       $(MAKEINFO) $(MAKEINFO_OPTS) --html -o $@ ${srcdir}/emacs-lisp-intro.texi
+       $(MAKEINFO) $(MAKEINFO_OPTS) $(HTML_OPTS) -o $@ ${srcdir}/emacs-lisp-intro.texi
 
 .PHONY: mostlyclean clean distclean maintainer-clean infoclean
 
@@ -83,8 +109,7 @@ mostlyclean:
          *.op *.ops *.pg *.pgs *.tp *.tps *.vr *.vrs
 
 clean: mostlyclean
-       rm -f emacs-lisp-intro.dvi emacs-lisp-intro.pdf emacs-lisp-intro.ps
-       rm -rf emacs-lisp-intro.html/
+       rm -f $(DVI_TARGETS) $(HTML_TARGETS) $(PDF_TARGETS) $(PS_TARGETS)
        rm -f emacs-lispintro-${version}.tar*
 
 distclean: clean
@@ -107,8 +132,61 @@ dist:
          -e 's/^\(buildinfodir *=\).*/\1 ./' \
          -e 's/^\(clean:.*\)/\1 infoclean/' \
          -e "s/@ver[s]ion@/${version}/" \
+         -e 's/@MAKE[I]NFO@/makeinfo/' -e 's/@MK[D]IR_P@/mkdir -p/' \
+         -e 's/@IN[F]O_EXT@/.info/' -e 's/@IN[F]O_OPTS@//' \
          ${srcdir}/Makefile.in > emacs-lispintro-${version}/Makefile
+       @if grep '@[a-zA-Z_]*@' emacs-lispintro-${version}/Makefile; then \
+         echo "Unexpanded configure variables in Makefile?" 1>&2; exit 1; \
+       fi
        tar -cf emacs-lispintro-${version}.tar emacs-lispintro-${version}
        rm -rf emacs-lispintro-${version}
 
+
+.PHONY: install-dvi install-html install-pdf install-ps install-doc
+
+install-dvi: dvi
+       umask 022; $(MKDIR_P) "$(DESTDIR)$(dvidir)"
+       $(INSTALL_DATA) $(DVI_TARGETS) "$(DESTDIR)$(dvidir)"
+install-html: html
+       umask 022; $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+       $(INSTALL_DATA) $(HTML_TARGETS) "$(DESTDIR)$(htmldir)"
+install-pdf: pdf
+        umask 022;$(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+       $(INSTALL_DATA) $(PDF_TARGETS) "$(DESTDIR)$(pdfdir)"
+install-ps: ps
+       umask 022; $(MKDIR_P) "$(DESTDIR)$(psdir)"
+       for file in $(PS_TARGETS); do \
+         $(INSTALL_DATA) $${file} "$(DESTDIR)$(psdir)"; \
+         [ -n "${GZIP_PROG}" ] || continue; \
+         rm -f "$(DESTDIR)$(psdir)/$${file}.gz"; \
+         ${GZIP_PROG} -9n "$(DESTDIR)$(psdir)/$${file}"; \
+       done
+
+## Top-level Makefile installs the info pages.
+install-doc: install-dvi install-html install-pdf install-ps
+
+
+.PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps uninstall-doc
+
+uninstall-dvi:
+       for file in $(DVI_TARGETS); do \
+         rm -f "$(DESTDIR)$(dvidir)/$${file}"; \
+       done
+uninstall-html:
+       for file in $(HTML_TARGETS); do \
+         rm -f "$(DESTDIR)$(htmldir)/$${file}"; \
+       done
+uninstall-ps:
+       ext= ; [ -n "${GZIP_PROG}" ] && ext=.gz; \
+       for file in $(PS_TARGETS); do \
+         rm -f "$(DESTDIR)$(psdir)/$${file}$${ext}"; \
+       done
+uninstall-pdf:
+       for file in $(PDF_TARGETS); do \
+         rm -f "$(DESTDIR)$(pdfdir)/$${file}"; \
+       done
+
+uninstall-doc: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
+
+
 ### Makefile ends here