# make all to compile and build Emacs.
# make install to install it.
-# make install.sysv to install on system V. Note that on system V you
-# must change mandir to /usr/local/man/man1.
-# make install.xenix to install on Xenix.
-# make install.aix to install on AIX.
-# make tags to update tags tables.
+# make TAGS to update tags tables.
#
-# make distclean to delete everything that wasn't in the distribution.
-# This is a very dangerous thing to do! It removes backup files,
-# among other things.
-# make clean
-# This is a little less dangerous.
-# make dist
-# This produces a tar file from the current source tree suitable
-# for redistribution.
+# make clean or make mostlyclean
+# Delete all files from the current directory that are normally
+# created by building the program. Don't delete the files that
+# record the configuration. Also preserve files that could be made
+# by building, but normally aren't because the distribution comes
+# with them.
+#
+# Delete `.dvi' files here if they are not part of the distribution.
+#
+# make distclean
+# Delete all files from the current directory that are created by
+# configuring or building the program. If you have unpacked the
+# source and built the program without creating any other files,
+# `make distclean' should leave only the files that were in the
+# distribution.
+#
+# make realclean
+# Delete everything from the current directory that can be
+# reconstructed with this Makefile. This typically includes
+# everything deleted by distclean, plus more: C source files
+# produced by Bison, tags tables, info files, and so on.
+#
+# make extraclean
+# Still more severe - delete backup and autosave files, too.
SHELL = /bin/sh
+MAKE = make # BSD doesn't have it as a default.
-# ==================== Where To Install Things ====================
+# ==================== Things `configure' Might Edit ====================
+
+CC=@CC@
+C_SWITCH_SYSTEM=@c_switch_system@
+ALLOCA=@ALLOCA@
+LN_S=@LN_S@
+CFLAGS=@CFLAGS@
+
+### These help us choose version- and architecture-specific directories
+### to install files in.
-version=version-not-set
-configname=configuration-name-not-set
+### This should be the number of the Emacs version we're building,
+### like `18.59' or `19.0'.
+version=@version@
+
+### This should be the name of the configuration we're building Emacs
+### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
+configuration=@configuration@
+
+### Libraries which should be edited into lib-src/Makefile.
+libsrc_libs=@libsrc_libs@
+
+# ==================== Where To Install Things ====================
# The default location for installation. Everything is placed in
-# subdirectories of this directory. This directory must exist when
-# you start installation. The default values for many of the
-# variables below are expressed in terms of this one, so you may not
-# need to change them.
+# subdirectories of this directory. The default values for many of
+# the variables below are expressed in terms of this one, so you may
+# not need to change them.
prefix=/usr/local
+# Like `prefix', but used for architecture-specific files.
+exec_prefix=${prefix}
+
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
-bindir=${prefix}/bin
+bindir=${exec_prefix}/bin
-# Where to install architecture-independent data files. ${lispdir}
-# and ${etcdir} are below this.
-datadir=${prefix}/lib/emacs/${version}
+# Where to install architecture-independent data files. ${lispdir}
+# and ${etcdir} are subdirectories of this.
+datadir=${prefix}/lib
# Where to install and expect the files that Emacs modifies as it
-# runs. These files are all architecture-independent. Right now,
-# the only such data is the locking directory.
-statedir=${prefix}/lib/emacs
+# runs. These files are all architecture-independent. Right now, the
+# only such data is the locking directory; ${lockdir} is a
+# subdirectory of this.
+statedir=${prefix}/lib
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
-# data.
-libdir=${prefix}/${version}/${configname}
+# data. ${archlibdir} is a subdirectory of this.
+libdir=${exec_prefix}/lib
# Where to install Emacs's man pages, and what extension they should have.
-mandir=/usr/man/man1
+mandir=${prefix}/man/man1
manext=.1
# Where to install and expect the info files describing Emacs. In the
# system, it is inappropriate to imply that it is part of Emacs.
infodir=${prefix}/info
-# Where to find the source code. The source code for Emacs's C kernel
-# is expected to be in ${srcdir}/src, and the source code for Emacs's
-# utility programs is expected to be in ${srcdir}/lib-src.
-# This is set by the configure script's `--srcdir' option.
-srcdir=.
-
+# Where to find the source code - setting this to anything but
+# . doesn't work yet. The source code for Emacs's C kernel is
+# expected to be in ${srcdir}/src, and the source code for Emacs's
+# utility programs is expected to be in ${srcdir}/lib-src. This is
+# set by the configure script's `--srcdir' option.
+srcdir=@srcdir@
# ==================== Emacs-specific directories ====================
-# Where to install the elisp files distributed with Emacs.
-lispdir=${datadir}/lisp
-
-# Directories Emacs should search for elisp files specific to this
-# site (i.e. customizations), before consulting ${lispdir}. This
+# These variables hold the values Emacs will actually use. They are
+# based on the values of the standard Make variables above.
+
+@inst_paths@# Where to install the lisp files distributed with
+@inst_paths@# Emacs. This includes the Emacs version, so that the
+@inst_paths@# lisp files for different versions of Emacs will install
+@inst_paths@# themselves in separate directories.
+@inst_paths@lispdir=${datadir}/emacs/${version}/lisp
+
+@inst_paths@# Where to install the lisp files which are distributed
+@inst_paths@# with Emacs but not maintained by the FSF. This
+@inst_paths@# includes the Emacs version, so that the lisp files for
+@inst_paths@# different versions of Emacs will install themselves in
+@inst_paths@# separate directories.
+@inst_paths@externallispdir=${datadir}/emacs/${version}/external-lisp
+
+@inst_paths@# Directories Emacs should search for lisp files specific
+@inst_paths@# to this site (i.e. customizations), before consulting
+@inst_paths@# ${lispdir}. This should be a colon-separated list of
+@inst_paths@# directories.
+@inst_paths@locallisppath=${datadir}/emacs/site-lisp
+
+# Where Emacs will search to find its lisp files. Before
+# changing this, check to see if your purpose wouldn't
+# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
-locallisppath=${prefix}/lib/emacs/local-lisp
-
-# Where Emacs will search to find its elisp files. Before changing
-# this, check to see if your purpose wouldn't better be served by
-# changing locallisppath. This should be a colon-separated list of
-# directories.
lisppath=${locallisppath}:${lispdir}
-# Where Emacs will search for its elisp files while building. This is
-# only used during the process of compiling Emacs, to help Emacs find
-# its lisp files before they've been installed in their final
-# location. It's usually identical to lisppath, except that the entry
-# for the directory containing the installed lisp files has been
-# replaced with ../lisp. This should be a colon-separated list of
-# directories.
-buildlisppath=../lisp
-
-# Where to install the other architecture-independent data files
-# distributed with Emacs (like the tutorial, the cookie recipes and
-# the Zippy database).
-etcdir=${datadir}/etc
-
-# Where to create and expect the locking directory, where the Emacs
-# locking code keeps track of which files are currently being edited.
-lockdir=${statedir}/lock
-
-# Where to put executables to be run by Emacs rather than the user.
-archlibdir=${libdir}
-
-# ==================== Things `configure' might edit ====================
-
-CC=cc
-CFLAGS=-g
+# Where Emacs will search for its lisp files while
+# building. This is only used during the process of
+# compiling Emacs, to help Emacs find its lisp files
+# before they've been installed in their final location.
+# It's usually identical to lisppath, except that the
+# entry for the directory containing the installed lisp
+# files has been replaced with ../lisp. This should be a
+# colon-separated list of directories.
+buildlisppath=${srcdir}/lisp
+
+@inst_paths@# Where to install the other architecture-independent
+@inst_paths@# data files distributed with Emacs (like the tutorial,
+@inst_paths@# the cookie recipes and the Zippy database). This path
+@inst_paths@# usually contains the Emacs version number, so the data
+@inst_paths@# files for multiple versions of Emacs may be installed
+@inst_paths@# at once.
+@inst_paths@etcdir=${datadir}/emacs/${version}/etc
+
+@inst_paths@# Where to create and expect the locking directory, where
+@inst_paths@# the Emacs locking code keeps track of which files are
+@inst_paths@# currently being edited.
+@inst_paths@lockdir=${statedir}/emacs/lock
+
+@inst_paths@# Where to put executables to be run by Emacs rather than
+@inst_paths@# the user. This path usually includes the Emacs version
+@inst_paths@# and configuration name, so that multiple configurations
+@inst_paths@# for multiple versions of Emacs may be installed at
+@inst_paths@# once.
+@inst_paths@archlibdir=${libdir}/emacs/${version}/${configuration}
+
+# ====================== Developer's configuration =======================
+
+# The following assignments make sense if you're running Emacs on a single
+# machine, one version at a time, and you want changes to the lisp and etc
+# directories in the source tree to show up immediately in your working
+# environment. It saves a great deal of disk space by not duplicating the
+# lisp and etc directories.
+
+@rip_paths@lispdir=${srcdir}/lisp
+@rip_paths@externallispdir=${srcdir}/externallisp
+@rip_paths@locallisppath=${datadir}/emacs/site-lisp
+@rip_paths@etcdir=${srcdir}/etc
+@rip_paths@lockdir=${srcdir}/lock
+@rip_paths@archlibdir=${srcdir}/lib-src
+@rip_paths@infodir=${srcdir}/info
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
-INSTALL = install
-INSTALLFLAGS = -c
+INSTALL = install -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL}
# ============================= Targets ==============================
# Flags passed down to subdirectory makefiles.
-MFLAGS = CC='${CC}' CFLAGS='${CFLAGS}'
+MFLAGS =
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
SUBDIR = lib-src src
+# The makefiles of the directories in $SUBDIR.
+SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile
+
# Subdirectories to install, and where they'll go.
-COPYDIR = arch-lib etc info lisp
-COPYDESTS = ${libdir} ${datadir} ${infodir} ${lispdir}
+# lib-src's makefile knows how to install it, so we don't do that here.
+# When installing the info files, we need to do special things to
+# avoid nuking an existing dir file, so we don't do that here;
+# instead, we have written out explicit code in the `install' targets.
+COPYDIR = etc ${srcdir}/etc ${srcdir}/lisp ${srcdir}/external-lisp
+COPYDESTS = ${etcdir} ${etcdir} ${lispdir} ${externallispdir}
all: src/paths.h ${SUBDIR}
removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/'
+# We force the rebuilding of src/paths.h because the user might give
+# make different values for the various directories. Since we use
+# move-if-change, src/paths.h only actually changes if the user did
+# something notable, so the only unnecessary work we do is in building
+# src/paths.h.tmp, which isn't much.
# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile src/paths.h.in
- lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
- buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < src/paths.h.in > src/paths.h.tmp \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
- -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
- -e 's;\(#.*PATH_EXEC\).*$$;\1 "${libdir}";' \
- -e 's;\(#.*PATH_DATA\).*$$;\1 "${datadir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";'
- ./move-if-change src/paths.h.tmp src/paths.h
+src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC
+ @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+ @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
+ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
+ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
+ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
+ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
+ -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
+ @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
src: lib-src
.RECURSIVE: ${SUBDIR}
-${SUBDIR}: FRC
- cd $@; make ${MFLAGS} all
-
-install: all mkdir lockdir
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xf - ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/emacsclient ${bindir}/emacsclient
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/etags ${bindir}/etags
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/ctags ${bindir}/ctags
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c -m 1755 src/xemacs ${bindir}/xemacs
- ${INSTALL_DATA} ${INSTALLFLAGS} -c -m 444 etc/emacs.1 ${mandir}/emacs.1
- -rm -f ${bindir}/emacs
- mv ${bindir}/xemacs ${bindir}/emacs
-
-install.sysv: all mkdir lockdir
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; find . -print | cpio -pdum ${dest} ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- -cpset arch-lib/emacsclient ${bindir}/emacsclient 755 bin bin
- -cpset arch-lib/etags ${bindir}/etags 755 bin bin
- -cpset arch-lib/ctags ${bindir}/ctags 755 bin bin
- -cpset etc/emacs.1 ${mandir}/emacs.1 444 bin bin
- -/bin/rm -f ${bindir}/emacs
- -cpset src/xemacs ${bindir}/emacs 1755 bin bin
-
-install.xenix: all mkdir lockdir
+${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
+ cd $@; $(MAKE) all ${MFLAGS} \
+ CC='${CC}' CFLAGS='${CFLAGS}' prefix='${prefix}' \
+ srcdir='${srcdir}/$@' libdir='${libdir}'
+
+## We build the makefiles for the subdirectories here so that we can
+## edit the values for the path variables into them. This means that
+## when the user has built them from this makefile once, they will use
+## the right default values for the path variables.
+lib-src/Makefile: ${srcdir}/lib-src/Makefile.in Makefile
+ rm -f lib-src/Makefile.tmp
+ @echo "Producing \`lib-src/Makefile' from \`${srcdir}/lib-src/Makefile.in'."
+ @(echo "# This file is generated from \`${srcdir}/lib-src/Makefile.in'." ; \
+ echo "# If you are thinking about editing it, you should seriously consider" ; \
+ echo "# running \`make lib-src/Makefile' at the top of the" ; \
+ echo "# Emacs build tree instead, or editing" ; \
+ echo "# \`${srcdir}/lib-src/Makefile.in' itself." ; \
+ sed < ${srcdir}/lib-src/Makefile.in \
+ -e 's|^\(version *=\).*$$|\1'"${version}"'|' \
+ -e 's|^\(configname *=\).*$$|\1'"${configuration}"'|' \
+ -e 's|^\(prefix *=\).*$$|\1'"${prefix}"'|' \
+ -e 's|^\(exec_prefix *=\).*$$|\1'"${exec_prefix}"'|' \
+ -e 's|^\(libdir *=\).*$$|\1'"${libdir}"'|' \
+ -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'/lib-src|' \
+ -e 's|^\(VPATH *=\).*$$|\1'"${srcdir}"'/lib-src|' \
+ -e 's|^\(archlibdir *=\).*$$|\1'"${archlibdir}"'|' \
+ -e 's|^\(ALLOCA *=\).*$$|\1'"${ALLOCA}"'|' \
+ -e 's|^CC *=.*$$|CC='"${CC}"'|' \
+ -e 's|^CFLAGS *=.*$$|CFLAGS='"${CFLAGS}"'|' \
+ -e 's|^C_SWITCH_SYSTEM *=.*$$|C_SWITCH_SYSTEM='"${C_SWITCH_SYSTEM}"'|' \
+ -e 's|^LOADLIBES *=.*$$|LOADLIBES='"${libsrc_libs}"'|' \
+ -e '/^# DIST: /d') > lib-src/Makefile.tmp
+ @${srcdir}/move-if-change lib-src/Makefile.tmp lib-src/Makefile
+ chmod -w lib-src/Makefile
+
+src/Makefile: ${srcdir}/src/Makefile.in Makefile
+ rm -f src/Makefile.tmp
+ @echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'."
+ @(echo "# This file is generated from \`${srcdir}/src/Makefile.in'." ; \
+ echo "# If you are thinking about editing it, you should seriously consider" ; \
+ echo "# running \`make src/Makefile' at the top of the" ; \
+ echo "# Emacs build tree instead, or editing" ; \
+ echo "# \`${srcdir}/src/Makefile.in' itself." ; \
+ sed < ${srcdir}/src/Makefile.in \
+ -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'/src|' \
+ -e 's|^\(VPATH *=\).*$$|\1'"${srcdir}"'/src|' \
+ -e 's|^CC *=.*$$|CC='"${CC}"'|' \
+ -e 's|^LN_S *=.*$$|LN_S='"${LN_S}"'|' \
+ -e 's|^CFLAGS *=.*$$|CFLAGS='"${CFLAGS}"'|' \
+ -e '/^# DIST: /d') > src/Makefile.tmp
+ @${srcdir}/move-if-change src/Makefile.tmp src/Makefile
+ chmod -w src/Makefile
+
+oldXMenu/Makefile: ${srcdir}/oldXMenu/Makefile.in Makefile
+ rm -f oldXMenu/Makefile.tmp
+ @echo "Producing \`oldXMenu/Makefile' from \`${srcdir}/oldXMenu/Makefile'."
+ @(echo "# This file is generated from \`${srcdir}/oldXMenu/Makefile'." ; \
+ echo "# If you are thinking about editing it, you should seriously consider" ; \
+ echo "# running \`make oldXMenu/Makefile' at the top of the" ; \
+ echo "# Emacs build tree instead, or editing" ; \
+ echo "# \`${srcdir}/oldXMenu/Makefile.in' itself." ; \
+ sed < ${srcdir}/oldXMenu/Makefile.in \
+ -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'/oldXMenu|' \
+ -e 's|^\(VPATH *=\).*$$|\1'"${srcdir}"'/oldXMenu|' \
+ -e 's|^CC *=.*$$|CC='"${CC}"'|' \
+ -e 's|^DEFS *=.*$$|DEFS='"${DEFS}"'|' \
+ -e '/^# DIST: /d') > oldXMenu/Makefile.tmp
+ @${srcdir}/move-if-change oldXMenu/Makefile.tmp oldXMenu/Makefile
+ chmod -w oldXMenu/Makefile
+
+Makefile:
+ ./config.status
+
+# ==================== Installation ====================
+
+## If we let lib-src do its own installation, that means we
+## don't have to duplicate the list of utilities to install in
+## this Makefile as well.
+
+## On AIX, use tar xBf.
+## On Xenix, use tar xpf.
+
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
+install: all mkdir
+ (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
-set ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xpf - ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
+ [ -d $${dir} ] \
+ && [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ] \
+ && (echo "Copying $${dir}..." ; \
+ rm -rf $${dest} ; mkdir $${dest} ; \
+ (cd $${dir}; tar cf - . )|(cd $${dest}; umask 0; tar xvf - ); \
+ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
+ rm -rf $${subdir}/RCS ; \
+ rm -rf $${subdir}/CVS ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/*~ ; \
+ done) ; \
done
- cp arch-lib/etags arch-lib/ctags arch-lib/emacsclient ${bindir}
- chmod 755 ${bindir}/etags ${bindir}/ctags ${bindir}/emacsclient
- cp etc/emacs.1 ${mandir}/emacs.1
- chmod 444 ${mandir}/emacs.1
- -mv -f ${bindir}/emacs ${bindir}/emacs.old
- cp src/xemacs ${bindir}/emacs
- chmod 1755 ${bindir}/emacs
- -rm -f ${bindir}/emacs.old
-
-install.aix: all mkdir lockdir
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xBf - ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/emacsclient
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/etags
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/ctags
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -M 1755 -f ${bindir} src/xemacs
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${mandir} etc/emacs.1
- -rm -f ${bindir}/emacs
- mv ${bindir}/xemacs ${bindir}/emacs
-
-# Build all the directories
+ -(cd ${srcdir}/info ; \
+ if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
+ ${INSTALL_DATA} dir ${infodir}/dir ; \
+ fi ; \
+ if [ "`echo *.info*`" != "*.info*" ]; then \
+ for f in *.info* ; do \
+ ${INSTALL_DATA} $$f ${infodir}/$$f ; \
+ done ; \
+ fi)
+ cd ${srcdir}/etc; for page in emacs etags ctags ; do \
+ ${INSTALL_DATA} $${page}.1 ${mandir}/$${page}${manext} ; \
+ done
+ ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
+ chmod 1755 ${bindir}/emacs-${version}
+ rm -f ${bindir}/emacs
+ ln ${bindir}/emacs-${version} ${bindir}/emacs
+
+### Build all the directories we're going to install Emacs in. Since
+### we may be creating several layers of directories (for example,
+### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
+### instead of mkdir. Not all systems' mkdirs have the `-p' flag.
mkdir: FRC
- # If any of the directories are below ${emacsdir}, create it.
- -for dir in ${COPYDESTS}; do \
- case "$${dir}" in \
- ${emacsdir}/* ) \
- if [ ! -d ${emacsdir} ]; then \
- mkdir ${emacsdir} ; \
- chmod 777 ${emacsdir} ; \
- fi ; \
- break\
- ;; \
- esac ; \
- done
- -mkdir ${COPYDESTS}
- -chmod 777 ${COPYDESTS}
-
-lockdir:
- # If the lockdir needs ${emacsdir}, create it.
- -case "${lockdir}" in \
- ${statedir}/* ) \
- if [ ! -d ${emacsdir} ]; then \
- mkdir ${emacsdir} ; \
- chmod 777 ${emacsdir} ; \
- fi \
- ;; \
- esac
- -mkdir ${LOCKDIR}
- -chmod 777 ${LOCKDIR}
+ ./lib-src/make-path ${COPYDESTS} ${lockdir}
+ chmod 777 ${COPYDESTS} ${lockdir}
FRC:
+
+# ==================== Cleaning up and miscellanea ====================
+
+### `clean'
+### Delete all files from the current directory that are normally
+### created by building the program. Don't delete the files that
+### record the configuration. Also preserve files that could be made
+### by building, but normally aren't because the distribution comes
+### with them.
+### `mostlyclean'
+### Like `clean', but may refrain from deleting a few files that
+### people normally don't want to recompile. For example, the
+### `mostlyclean' target for GCC does not delete `libgcc.a', because
+### recompiling it is rarely necessary and takes a lot of time.
+###
clean mostlyclean:
- cd src; make clean
- if [ `/bin/pwd` != `(cd ${emacsdir}; /bin/pwd)` ] ; then \
- (cd etc; make clean); \
- (cd lib-src; make clean); \
+ cd src; $(MAKE) clean
+ cd lib-src; $(MAKE) clean
+ cd oldXMenu; $(MAKE) clean
+ if [ `(cd ${etcdir} ; /bin/pwd)` != `(cd etc; /bin/pwd)` ] ; then \
+ cd etc; $(MAKE) clean; \
else true; \
fi
- cd oldXMenu; make clean
+### `distclean'
+### Delete all files from the current directory that are created by
+### configuring or building the program. This should leave only the
+### files that would be in the distribution.
distclean:
- for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} distclean); done
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} distclean); done
-(cd lock; rm *)
-rm config.status config-tmp-*
- -rm #*# *~
+### `realclean'
+### Delete everything from the current directory that can be
+### reconstructed with this makefile. This typically includes
+### everything deleted by distclean, plus more: C source files
+### produced by Bison, tags tables, info files, and so on.
realclean:
- for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} realclean); done
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} realclean); done
(cd lock; rm *)
rm config.status
+### This doesn't actually appear in the coding standards, but Karl
+### says GCC supports it, and that's where the configuration part of
+### the coding standards seem to come from. It's like distclean, but
+### it deletes backup and autosave files too.
+extraclean:
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} extraclean); done
+ -(cd lock; rm *)
+ -rm config.status config-tmp-*
+ -rm -f *~ \#*
+
+### Unlocking and relocking. The idea of these productions is to reduce
+### hassles when installing an incremental tar of Emacs. Do `make unlock'
+### before unlocking the file to take the write locks off all sources so
+### that tar xvof will overwrite them without fuss. Then do `make relock'
+### afterward so that VC mode will know which files should be checked in
+### if you want to mung them.
+###
+### Note: it's no disaster if these productions miss a file or two; tar
+### and VC will swiftly let you know if this happens, and it is easily
+### corrected.
+SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
+ README build-install.in configure make-dist move-if-change
+
+unlock:
+ chmod u+w $(SOURCES) cpp/*
+ -(cd elisp; chmod u+w Makefile README *.texi)
+ (cd etc; make unlock)
+ (cd lib-src; make unlock)
+ (cd lisp; make unlock)
+ (cd lisp/term; chmod u+w README *.el)
+ (cd man; chmod u+w *texi* ChangeLog split-man)
+ (cd oldXMenu; chmod u+w *.[ch] Makefile README)
+ (cd src; make unlock)
+
+relock:
+ chmod u-w $(SOURCES) cpp/*
+ -(cd elisp; chmod u-w Makefile README *.texi)
+ (cd etc; make relock)
+ (cd lib-src; make relock)
+ (cd lisp; make relock)
+ (cd lisp/term; chmod u+w README *.el)
+ (cd man; chmod u+w *texi* ChangeLog split-man)
+ (cd oldXMenu; chmod u+w *.[ch] Makefile README)
+ (cd src; make relock)
+
TAGS tags: lib-src
- cd src; ../arch-lib/etags *.[ch] ../lisp/*.el ../lisp/term/*.el
+ (cd ${srcdir} ; lib-src/etags --output=./src/TAGS \
+ src/*.[ch] lisp/*.el lisp/term/*.el)
check:
@echo "We don't have any tests for GNU Emacs yet."
dist:
- make-dist
+ cd ${srcdir}; make-dist