Add :link (custom-group-link font-lock-faces) to defgroup.

[gnu-emacs] / man / fixit.texi

diff --git a/man/fixit.texi b/man/fixit.texi
index 02f7ed767b635a5ded90cd6289c3b818f8ba3a02..f58d3c835a689fd7fc76838f90c6d4395eb94df8 100644 (file)
--- a/man/fixit.texi
+++ b/man/fixit.texi
@@ -1,7 +1,8 @@
 @c This is part of the Emacs manual.
 @c This is part of the Emacs manual.

-@c Copyright (C) 1985, 86, 87, 93, 94, 95, 1997 Free Software Foundation, Inc.
+@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2002, 2003,
+@c   2004, 2005 Free Software Foundation, Inc.

 @c See file emacs.texi for copying conditions.
 @c See file emacs.texi for copying conditions.

-@node Fixit, Files, Search, Top
+@node Fixit, Keyboard Macros, Search, Top

 @chapter Commands for Fixing Typos
 @cindex typos, fixing
 @cindex mistakes, correcting
 @chapter Commands for Fixing Typos
 @cindex typos, fixing
 @cindex mistakes, correcting


@@ -11,12 +12,12 @@ the times when you catch a mistake in your text just after you have made
 it, or change your mind while composing text on the fly.
 
   The most fundamental command for correcting erroneous editing is the
 it, or change your mind while composing text on the fly.
 
   The most fundamental command for correcting erroneous editing is the

-undo command, @kbd{C-x u} or @kbd{C-_}.  This command undoes a single
-command (usually), a part of a command (in the case of
-@code{query-replace}), or several consecutive self-inserting characters.
-Consecutive repetitions of @kbd{C-_} or @kbd{C-x u} undo earlier and
-earlier changes, back to the limit of the undo information available.
-@xref{Undo}, for more information.
+undo command, @kbd{C-x u} or @kbd{C-_} or @kbd{C-/}.  This command
+undoes a single command (usually), a part of a command (in the case of
+@code{query-replace}), or several consecutive self-inserting
+characters.  Consecutive repetitions of the undo command undo earlier
+and earlier changes, back to the limit of the undo information
+available.  @xref{Undo}, for more information.

 
 @menu
 * Kill Errors:: Commands to kill a batch of recently entered text.
 
 @menu
 * Kill Errors:: Commands to kill a batch of recently entered text.


@@ -81,12 +82,11 @@ given at the end of a line, rather than transposing the last character of
 the line with the newline, which would be useless, @kbd{C-t} transposes the
 last two characters on the line.  So, if you catch your transposition error
 right away, you can fix it with just a @kbd{C-t}.  If you don't catch it so
 the line with the newline, which would be useless, @kbd{C-t} transposes the
 last two characters on the line.  So, if you catch your transposition error
 right away, you can fix it with just a @kbd{C-t}.  If you don't catch it so

-fast, you must move the cursor back to between the two transposed
-characters.  If you transposed a space with the last character of the word
-before it, the word motion commands are a good way of getting there.
-Otherwise, a reverse search (@kbd{C-r}) is often the best way.
-@xref{Search}.
-
+fast, you must move the cursor back between the two transposed
+characters before you type @kbd{C-t}.  If you transposed a space with
+the last character of the word before it, the word motion commands are
+a good way of getting there.  Otherwise, a reverse search (@kbd{C-r})
+is often the best way.  @xref{Search}.

 
 @kindex C-x C-t
 @findex transpose-lines
 
 @kindex C-x C-t
 @findex transpose-lines


@@ -154,15 +154,18 @@ case-convert it and go on typing.  @xref{Case}.@refill
 word or of a portion of a buffer.  These commands work with the spelling
 checker program Ispell, which is not part of Emacs.
 @ifinfo
 word or of a portion of a buffer.  These commands work with the spelling
 checker program Ispell, which is not part of Emacs.
 @ifinfo

-@xref{Top, Ispell, Overview ispell, ispell.info, The Ispell Manual}.
+@xref{Top, Ispell, Overview ispell, ispell, The Ispell Manual}.

 @end ifinfo
 
 @table @kbd
 @item M-x flyspell-mode
 Enable Flyspell mode, which highlights all misspelled words.
 @end ifinfo
 
 @table @kbd
 @item M-x flyspell-mode
 Enable Flyspell mode, which highlights all misspelled words.

+@item M-x flyspell-prog-mode
+Enable Flyspell mode for comments and strings only.

 @item M-$
 Check and correct spelling of the word at point (@code{ispell-word}).
 @item M-@key{TAB}
 @item M-$
 Check and correct spelling of the word at point (@code{ispell-word}).
 @item M-@key{TAB}

+@itemx @key{ESC} @key{TAB}

 Complete the word before point based on the spelling dictionary
 (@code{ispell-complete-word}).
 @item M-x ispell
 Complete the word before point based on the spelling dictionary
 (@code{ispell-complete-word}).
 @item M-x ispell


@@ -172,7 +175,7 @@ Check and correct spelling of each word in the buffer.
 @item M-x ispell-region
 Check and correct spelling of each word in the region.
 @item M-x ispell-message
 @item M-x ispell-region
 Check and correct spelling of each word in the region.
 @item M-x ispell-message

-Check and correct spelling of each word in a draft mail message, 
+Check and correct spelling of each word in a draft mail message,

 excluding cited material.
 @item M-x ispell-change-dictionary @key{RET} @var{dict} @key{RET}
 Restart the Ispell process, using @var{dict} as the dictionary.
 excluding cited material.
 @item M-x ispell-change-dictionary @key{RET} @var{dict} @key{RET}
 Restart the Ispell process, using @var{dict} as the dictionary.


@@ -194,14 +197,18 @@ it with @kbd{Mouse-2} to display a menu of possible corrections and
 actions.  You can also correct the word by editing it manually in any
 way you like.
 
 actions.  You can also correct the word by editing it manually in any
 way you like.
 

+@findex flyspell-prog-mode
+Flyspell Prog mode works just like ordinary Flyspell mode, except that
+it only checks words in comments and string constants.  This feature
+is useful for editing programs.  Type @kbd{M-x flyspell-prog-mode} to
+enable or disable this mode in the current buffer.
+

   The other Emacs spell-checking features check or look up words when
   The other Emacs spell-checking features check or look up words when

-you give an explicit command to do so.  Checking all or part of the
-buffer is useful when you have text that was written outside of this
-Emacs session and might contain any number of misspellings.
+you give an explicit command to do so.

 
 @kindex M-$
 @findex ispell-word
 
 @kindex M-$
 @findex ispell-word

-  To check the spelling of the word around or next to point, and
+  To check the spelling of the word around or before point, and

 optionally correct it as well, use the command @kbd{M-$}
 (@code{ispell-word}).  If the word is not correct, the command offers
 you various alternatives for what to do about it.
 optionally correct it as well, use the command @kbd{M-$}
 (@code{ispell-word}).  If the word is not correct, the command offers
 you various alternatives for what to do about it.


@@ -211,7 +218,7 @@ you various alternatives for what to do about it.
   To check the entire current buffer, use @kbd{M-x ispell-buffer}.  Use
 @kbd{M-x ispell-region} to check just the current region.  To check
 spelling in an email message you are writing, use @kbd{M-x
   To check the entire current buffer, use @kbd{M-x ispell-buffer}.  Use
 @kbd{M-x ispell-region} to check just the current region.  To check
 spelling in an email message you are writing, use @kbd{M-x

-ispell-message}; that checks the whole buffer, but does not check
+ispell-message}; that command checks the whole buffer, except for

 material that is indented or appears to be cited from other messages.
 
 @findex ispell
 material that is indented or appears to be cited from other messages.
 
 @findex ispell


@@ -223,7 +230,8 @@ spell-checks the current buffer.
   Each time these commands encounter an incorrect word, they ask you
 what to do.  They display a list of alternatives, usually including
 several ``near-misses''---words that are close to the word being
   Each time these commands encounter an incorrect word, they ask you
 what to do.  They display a list of alternatives, usually including
 several ``near-misses''---words that are close to the word being

-checked.  Then you must type a character.  Here are the valid responses:
+checked.  Then you must type a single-character response.  Here are
+the valid responses:

 
 @table @kbd
 @item @key{SPC}
 
 @table @kbd
 @item @key{SPC}


@@ -231,11 +239,13 @@ Skip this word---continue to consider it incorrect, but don't change it
 here.
 
 @item r @var{new} @key{RET}
 here.
 
 @item r @var{new} @key{RET}

-Replace the word (just this time) with @var{new}.
+Replace the word (just this time) with @var{new}.  (The replacement
+string will be rescanned for more spelling errors.)

 
 @item R @var{new} @key{RET}
 Replace the word with @var{new}, and do a @code{query-replace} so you
 
 @item R @var{new} @key{RET}
 Replace the word with @var{new}, and do a @code{query-replace} so you

-can replace it elsewhere in the buffer if you wish.
+can replace it elsewhere in the buffer if you wish.  (The replacements
+will be rescanned for more spelling errors.)

 
 @item @var{digit}
 Replace the word (just this time) with one of the displayed
 
 @item @var{digit}
 Replace the word (just this time) with one of the displayed


@@ -252,7 +262,7 @@ editing session and for this buffer.
 
 @item i
 Insert this word in your private dictionary file so that Ispell will
 
 @item i
 Insert this word in your private dictionary file so that Ispell will

-consider it correct it from now on, even in future sessions.
+consider it correct from now on, even in future sessions.

 
 @item u
 Insert the lower-case version of this word in your private dic@-tion@-ary
 
 @item u
 Insert the lower-case version of this word in your private dic@-tion@-ary


@@ -264,13 +274,14 @@ information.
 
 @item l @var{word} @key{RET}
 Look in the dictionary for words that match @var{word}.  These words
 
 @item l @var{word} @key{RET}
 Look in the dictionary for words that match @var{word}.  These words

-become the new list of ``near-misses''; you can select one of them to
-replace with by typing a digit.  You can use @samp{*} in @var{word} as a
+become the new list of ``near-misses''; you can select one of them as
+the replacement by typing a digit.  You can use @samp{*} in @var{word} as a

 wildcard.
 
 @item C-g
 wildcard.
 
 @item C-g

-Quit interactive spell checking.  You can restart it again afterward
-with @kbd{C-u M-$}.
+Quit interactive spell checking, leaving point at the word that was
+being checked.  You can restart checking again afterward with @kbd{C-u
+M-$}.

 
 @item X
 Same as @kbd{C-g}.
 
 @item X
 Same as @kbd{C-g}.


@@ -288,16 +299,21 @@ Refresh the screen.
 @item C-z
 This key has its normal command meaning (suspend Emacs or iconify this
 frame).
 @item C-z
 This key has its normal command meaning (suspend Emacs or iconify this
 frame).

+
+@item ?
+Show the list of options.

 @end table
 
 @findex ispell-complete-word
   The command @code{ispell-complete-word}, which is bound to the key
 @kbd{M-@key{TAB}} in Text mode and related modes, shows a list of
 completions based on spelling correction.  Insert the beginning of a
 @end table
 
 @findex ispell-complete-word
   The command @code{ispell-complete-word}, which is bound to the key
 @kbd{M-@key{TAB}} in Text mode and related modes, shows a list of
 completions based on spelling correction.  Insert the beginning of a

-word, and then type @kbd{M-@key{TAB}}; the command displays a completion
-list window.  To choose one of the completions listed, click
-@kbd{Mouse-2} on it, or move the cursor there in the completions window
-and type @key{RET}.  @xref{Text Mode}.
+word, and then type @kbd{M-@key{TAB}}; the command displays a
+completion list window.  (If your window manager intercepts
+@kbd{M-@key{TAB}}, type @kbd{@key{ESC} @key{TAB}} or @kbd{C-M-i}.)  To
+choose one of the completions listed, click @kbd{Mouse-2} or
+@kbd{Mouse-1} fast on it, or move the cursor there in the completions
+window and type @key{RET}.  @xref{Text Mode}.

 
 @ignore
 @findex reload-ispell
 
 @ignore
 @findex reload-ispell


@@ -319,10 +335,22 @@ more quickly.  If you want to get rid of the Ispell process, use
 process uses no time except when you do spelling correction.
 
 @vindex ispell-dictionary
 process uses no time except when you do spelling correction.
 
 @vindex ispell-dictionary

-  Ispell uses two dictionaries: the standard dictionary and your private
-dictionary.  The variable @code{ispell-dictionary} specifies the file
-name of the standard dictionary to use.  A value of @code{nil} says to
-use the default dictionary.  The command @kbd{M-x
-ispell-change-dictionary} sets this variable and then restarts the
-Ispell subprocess, so that it will use a different dictionary.
+  Ispell uses two dictionaries together for spell checking: the
+standard dictionary and your private dictionary.  The variable
+@code{ispell-dictionary} specifies the file name to use for the
+standard dictionary; a value of @code{nil} selects the default
+dictionary.  The command @kbd{M-x ispell-change-dictionary} sets this
+variable and then restarts the Ispell subprocess, so that it will use
+a different standard dictionary.
+
+@vindex ispell-complete-word-dict
+  Ispell uses a separate dictionary for word completion.  The variable
+@code{ispell-complete-word-dict} specifies the file name of this
+dictionary.  The completion dictionary must be different because it
+cannot use root and affix information.  For some languages
+there is a spell checking dictionary but no word completion
+dictionary.

 
 

+@ignore
+   arch-tag: 3359a443-96ed-448f-9f05-c8111ba8eac0
+@end ignore