#
# make extraclean
# Still more severe - delete backup and autosave files, too.
+# Also generated files that do not normally change and can be slow
+# to rebuild (eg leim/ja-dic).
#
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-# Where to install the lisp, leim files distributed with
-# Emacs. This includes the Emacs version, so that the
-# lisp files for different versions of Emacs will install
-# themselves in separate directories.
+# Where to install the lisp files distributed with Emacs.
+# This includes the Emacs version, so that the lisp files for different
+# versions of Emacs will install themselves in separate directories.
lispdir=@lispdir@
-leimdir=@leimdir@
# Directories Emacs should search for standard lisp files.
-# The default is ${lispdir}:${leimdir}.
+# The default is ${lispdir}.
standardlisppath=@standardlisppath@
# Directories Emacs should search for lisp files specific to this
# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
-# Where Emacs will search for its lisp files while
-# building. This is only used during the process of
-# compiling Emacs, to help Emacs find its lisp files
-# before they've been installed in their final location.
+# Where Emacs will search for its lisp files while building.
+# This is only used during the process of compiling Emacs,
+# to help Emacs find its lisp files before they've been installed
+# in their final location.
# This should be a colon-separated list of directories.
# Normally it points to the lisp/ directory in the sources.
+# NB lread.c relies on lisp/ being first here.
buildlisppath=${abs_srcdir}/lisp
# Where to install the other architecture-independent
EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
-SUBDIR = $(NTDIR) lib lib-src src lisp leim
+SUBDIR = $(NTDIR) lib lib-src src lisp
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
# Subdirectories to install, and where they'll go. lib-src's and nt's
# makefiles know how to install them, so we don't do that here.
# Directories that cannot simply be copied, eg info, are treated
-# separately. quail appears twice because in out-of-tree builds, it
-# exists twice.
-COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
-COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}/ja-dic" "$(DESTDIR)${leimdir}/quail" "$(DESTDIR)${leimdir}/quail"
+# separately.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}"
all: ${SUBDIR}
-e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-# Convert MSYS-style /x/foo or Windows-style x:\foo file names
-# into x:/foo that Windows can grok.
-msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
-
-# Transform directory search path and its components. Original can
-# be MSYS or Windows style. Set path separator to ";", directory
-# separator to "/" and transform MSYS-style "/c/" to "c:/".
-# Remove empty path components and escape semicolons.
-msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
- -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
- -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
- -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
-
-# Replace "${prefix}" with '%emacs_dir%' (which expands to install
+# Replace "${w32prefix}" with '%emacs_dir%' (which expands to install
# directory at runtime).
-msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
+msys_w32prefix_subst=sed -e 's!\(^\|;\)'"$${w32prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
# Quote Sed special characters (except backslash and newline) with
# a double backslash.
# The w32 build needs a slightly different editing, and it uses
# nt/epaths.nt as the template.
+#
# Use the value of ${locallisppath} supplied by `configure',
# to support the --enable-locallisppath argument.
+#
+# In this case, the paths written to 'src/epaths.h' must be in native
+# MS-Windows format (e.g. 'c:/foo/bar'), because temacs is a MinGW
+# program that doesn't support MSYS-style paths (e.g. '/c/foo/bar' or
+# '/foo/bar').
epaths-force-w32: FRC
- @(w32srcdir=`echo "${abs_srcdir}" | ${msys_to_w32}` ; \
- prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
- locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
+ @(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${srcdir}"`; \
+ w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}" N`; \
+ w32prefixpattern=`echo "$${w32prefix}" | ${msys_sed_sh_escape}` ; \
+ w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}" N ":" "\\;" | ${msys_w32prefix_subst}` ; \
sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
- -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath}"'";' \
-e '/^.*#/s/@VER@/${version}/g' \
-e '/^.*#/s/@CFG@/${configuration}/g' \
-e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
src: lib-src
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
-# and `leim'.
-lisp leim: src
+# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
+lisp: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp leim nt: Makefile FRC
+lib lib-src lisp nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
$(srcdir)/configure: $(AUTOCONF_INPUTS)
cd ${srcdir} && autoconf
-ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
+ACLOCAL_INPUTS = $(srcdir)/configure.ac $(srcdir)/m4/gnulib-comp.m4
$(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
cd $(srcdir) && aclocal -I m4
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-## We used to create locallisppath, but if it points to non-standard
-## locations, is not really Emacs's job to create these directories,
-## so it is no longer done.
+## We always create the _default_ locallisppath directories, and
+## ensure that they contain a subdirs.el file (via write_subdir).
+## This is true even if locallisppath has a non-default value.
+## In case of non-default value, we used to create the specified directories,
+## but not add subdirs.el to them. This was a strange halfway house.
+## Nowadays we do not create non-default directories.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
-install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
+install-arch-indep: lisp install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
[ -d $${dir} ] || exit 1 ; \
dest="$$1" ; shift ; \
- [ -d "$${dest}" ] && \
- [ "`cd \"$${dest}\" && /bin/pwd`" = "`cd $${dir} && /bin/pwd`" ] && \
- continue ; \
- if [ "$${dir}" = "leim/quail" ]; then \
- [ "`cd $${dir} && /bin/pwd`" = "`cd ${srcdir}/leim/quail && /bin/pwd`" ] && \
- continue ; \
- else \
- rm -rf "$${dest}" ; \
- umask 022; ${MKDIR_P} "$${dest}" ; \
- fi ; \
+ if [ -d "$${dest}" ]; then \
+ exp_dest=`cd "$${dest}" && /bin/pwd`; \
+ [ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
+ else true; \
+ fi; \
+ rm -rf "$${dest}" ; \
+ umask 022; ${MKDIR_P} "$${dest}" ; \
echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -chf - . ) \
| (cd "$${dest}"; umask 022; \
done ); \
find "$${dest}" -exec chown $${installuser} {} ';' ;\
done
- -rm -f "$(DESTDIR)${leimdir}/leim-list.el"
- ${INSTALL_DATA} leim/leim-list.el "$(DESTDIR)${leimdir}/leim-list.el"
-rm -f "$(DESTDIR)${lispdir}/subdirs.el"
umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
( echo "Compressing *.el ..." ; \
unset CDPATH; \
thisdir=`/bin/pwd`; \
- for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}"; do \
+ for dir in "$(DESTDIR)${lispdir}"; do \
cd "$${thisdir}" ; \
cd "$${dir}" || exit 1 ; \
for f in `find . -name "*.elc" -print`; do \
- ${GZIP_PROG} -9n "`echo \"$$f\" | sed 's/.elc$$/.el/'`" ; \
+ f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \
+ ${GZIP_PROG} -9n "$$f_el" ; \
done ; \
done )
-chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
install-etcdoc: src install-arch-indep
-unset CDPATH; \
umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
- if [ "`cd ./etc; /bin/pwd`" != "`cd \"$(DESTDIR)${etcdocdir}\"; /bin/pwd`" ]; \
+ exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \
+ if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
then \
docfile="DOC"; \
echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
-unset CDPATH; \
thisdir=`/bin/pwd`; \
- if [ "`cd ${srcdir}/info && /bin/pwd`" = "`cd \"$(DESTDIR)${infodir}\" && /bin/pwd`" ]; then \
+ exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \
+ if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
true; \
else \
(cd "$(DESTDIR)${infodir}"; \
-cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
- cd leim && $(MAKE) $(MFLAGS) mostlyclean
### `clean'
### Delete all files from the current directory that are normally
-cd doc/misc && $(MAKE) $(MFLAGS) clean
-cd doc/lispref && $(MAKE) $(MFLAGS) clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) clean
- cd leim && $(MAKE) $(MFLAGS) clean
cd nextstep && $(MAKE) $(MFLAGS) clean
### `bootclean'
cd leim && $(MAKE) $(MFLAGS) distclean
cd lisp && $(MAKE) $(MFLAGS) distclean
cd nextstep && $(MAKE) $(MFLAGS) distclean
- [ ! -d test/automated ] || { \
- cd test/automated && $(MAKE) $(MFLAGS) distclean; \
- }
+ for dir in test/automated admin/grammars admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \
+ done
${top_distclean}
### `bootstrap-clean'
-cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
- cd leim && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) bootstrap-clean
cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
- [ ! -d test/automated ] || { \
- cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
- }
+ for dir in test/automated admin/grammars admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \
+ done
[ ! -f config.log ] || mv -f config.log config.log~
${top_bootclean}
rm -fr autom4te.cache
maintainer-clean: bootstrap-clean FRC
cd src && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) maintainer-clean
cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
- [ ! -d test/automated ] || { \
- cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
- }
+ for dir in test/automated admin/grammars admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \
+ done
${top_maintainer_clean}
### This doesn't actually appear in the coding standards, but Karl
TAGS tags: lib lib-src src
cd src; $(MAKE) $(MFLAGS) tags
-check:
+check: all
@if test ! -d test/automated; then \
echo "You do not seem to have the test/ directory."; \
echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
# Bootstrapping does the following:
# * Remove files to start from a bootstrap-clean slate.
-# * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
+# * Run autogen.sh.
# * Rebuild Makefile, to update the build procedure itself.
# * Do the actual build.
bootstrap: bootstrap-clean FRC
- cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
+ cd $(srcdir) && ./autogen.sh
$(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) $(MFLAGS) info all
echo "You must build Emacs to use this command"; \
exit 1; \
fi
- cd leim && $(MAKE) $(MFLAGS) $@
cd lisp && $(MAKE) $(MFLAGS) $@