/* Header file for the buffer manipulation primitives.
- Copyright (C) 1985, 1986, 1993, 1994 Free Software Foundation, Inc.
+ Copyright (C) 1985, 1986, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001,
+ 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GNU Emacs.
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
-#ifdef USE_TEXT_PROPERTIES
-#define SET_PT(position) (set_point ((position), current_buffer))
-#define TEMP_SET_PT(position) (temp_set_point ((position), current_buffer))
+/* Accessing the parameters of the current buffer. */
-#define BUF_SET_PT(buffer, position) (set_point ((position), (buffer)))
-#define BUF_TEMP_SET_PT(buffer, position) (temp_set_point ((position), (buffer)))
+/* These macros come in pairs, one for the char position
+ and one for the byte position. */
-#else /* don't support text properties */
+/* Position of beginning of buffer. */
+#define BEG (1)
+#define BEG_BYTE (BEG)
-#define SET_PT(position) (current_buffer->text.pt = (position))
-#define TEMP_SET_PT(position) (current_buffer->text.pt = (position))
+/* Position of beginning of accessible range of buffer. */
+#define BEGV (current_buffer->begv)
+#define BEGV_BYTE (current_buffer->begv_byte)
-#define BUF_SET_PT(buffer, position) (buffer->text.pt = (position))
-#define BUF_TEMP_SET_PT(buffer, position) (buffer->text.pt = (position))
-#endif /* don't support text properties */
+/* Position of point in buffer. The "+ 0" makes this
+ not an l-value, so you can't assign to it. Use SET_PT instead. */
+#define PT (current_buffer->pt + 0)
+#define PT_BYTE (current_buffer->pt_byte + 0)
-/* Character position of beginning of buffer. */
-#define BEG (1)
+/* Position of gap in buffer. */
+#define GPT (current_buffer->text->gpt)
+#define GPT_BYTE (current_buffer->text->gpt_byte)
+
+/* Position of end of accessible range of buffer. */
+#define ZV (current_buffer->zv)
+#define ZV_BYTE (current_buffer->zv_byte)
+
+/* Position of end of buffer. */
+#define Z (current_buffer->text->z)
+#define Z_BYTE (current_buffer->text->z_byte)
+
+/* Macros for the addresses of places in the buffer. */
+
+/* Address of beginning of buffer. */
+#define BEG_ADDR (current_buffer->text->beg)
-/* Character position of beginning of accessible range of buffer. */
-#define BEGV (current_buffer->text.begv)
+/* Address of beginning of accessible range of buffer. */
+#define BEGV_ADDR (BYTE_POS_ADDR (current_buffer->begv_byte))
-/* Character position of point in buffer. The "+ 0" makes this
- not an l-value, so you can't assign to it. Use SET_PT instead. */
-#define PT (current_buffer->text.pt + 0)
+/* Address of point in buffer. */
+#define PT_ADDR (BYTE_POS_ADDR (current_buffer->pt_byte))
-/* Character position of gap in buffer. */
-#define GPT (current_buffer->text.gpt)
+/* Address of beginning of gap in buffer. */
+#define GPT_ADDR (current_buffer->text->beg + current_buffer->text->gpt_byte - BEG_BYTE)
-/* Character position of end of accessible range of buffer. */
-#define ZV (current_buffer->text.zv)
+/* Address of end of gap in buffer. */
+#define GAP_END_ADDR (current_buffer->text->beg + current_buffer->text->gpt_byte + current_buffer->text->gap_size - BEG_BYTE)
+
+/* Address of end of accessible range of buffer. */
+#define ZV_ADDR (BYTE_POS_ADDR (current_buffer->zv_byte))
-/* Character position of end of buffer. */
-#define Z (current_buffer->text.z)
+/* Address of end of buffer. */
+#define Z_ADDR (current_buffer->text->beg + current_buffer->text->gap_size + current_buffer->text->z_byte - BEG_BYTE)
+
+/* Size of gap. */
+#define GAP_SIZE (current_buffer->text->gap_size)
-/* Is the current buffer narrowed? */
+/* Is the current buffer narrowed? */
#define NARROWED ((BEGV != BEG) || (ZV != Z))
/* Modification count. */
-#define MODIFF (current_buffer->text.modiff)
+#define MODIFF (current_buffer->text->modiff)
-/* Address of beginning of buffer. */
-#define BEG_ADDR (current_buffer->text.beg)
+/* Overlay modification count. */
+#define OVERLAY_MODIFF (current_buffer->text->overlay_modiff)
-/* Address of beginning of accessible range of buffer. */
-#define BEGV_ADDR (&FETCH_CHAR (current_buffer->text.begv))
+/* Modification count as of last visit or save. */
+#define SAVE_MODIFF (current_buffer->text->save_modiff)
-/* Address of point in buffer. */
-#define PT_ADDR (&FETCH_CHAR (current_buffer->text.pt))
+/* BUFFER_CEILING_OF (resp. BUFFER_FLOOR_OF), when applied to n, return
+ the max (resp. min) p such that
-/* Address of beginning of gap in buffer. */
-#define GPT_ADDR (current_buffer->text.beg + current_buffer->text.gpt - 1)
+ BYTE_POS_ADDR (p) - BYTE_POS_ADDR (n) == p - n */
-/* Address of end of gap in buffer. */
-#define GAP_END_ADDR (current_buffer->text.beg + current_buffer->text.gpt + current_buffer->text.gap_size - 1)
+#define BUFFER_CEILING_OF(BYTEPOS) \
+ (((BYTEPOS) < GPT_BYTE && GPT < ZV ? GPT_BYTE : ZV_BYTE) - 1)
+#define BUFFER_FLOOR_OF(BYTEPOS) \
+ (BEGV <= GPT && GPT_BYTE <= (BYTEPOS) ? GPT_BYTE : BEGV_BYTE)
+\f
+/* Similar macros to operate on a specified buffer.
+ Note that many of these evaluate the buffer argument more than once. */
-/* Address of end of accessible range of buffer. */
-#define ZV_ADDR (&FETCH_CHAR (current_buffer->text.zv))
+/* Position of beginning of buffer. */
+#define BUF_BEG(buf) (BEG)
+#define BUF_BEG_BYTE(buf) (BEG_BYTE)
-/* Size of gap. */
-#define GAP_SIZE (current_buffer->text.gap_size)
+/* Position of beginning of accessible range of buffer. */
+#define BUF_BEGV(buf) ((buf)->begv)
+#define BUF_BEGV_BYTE(buf) ((buf)->begv_byte)
-/* Now similar macros for a specified buffer.
- Note that many of these evaluate the buffer argument more than once. */
+/* Position of point in buffer. */
+#define BUF_PT(buf) ((buf)->pt)
+#define BUF_PT_BYTE(buf) ((buf)->pt_byte)
-/* Character position of beginning of buffer. */
-#define BUF_BEG(buf) (1)
+/* Position of gap in buffer. */
+#define BUF_GPT(buf) ((buf)->text->gpt)
+#define BUF_GPT_BYTE(buf) ((buf)->text->gpt_byte)
-/* Character position of beginning of accessible range of buffer. */
-#define BUF_BEGV(buf) ((buf)->text.begv)
+/* Position of end of accessible range of buffer. */
+#define BUF_ZV(buf) ((buf)->zv)
+#define BUF_ZV_BYTE(buf) ((buf)->zv_byte)
-/* Character position of point in buffer. */
-#define BUF_PT(buf) ((buf)->text.pt)
+/* Position of end of buffer. */
+#define BUF_Z(buf) ((buf)->text->z)
+#define BUF_Z_BYTE(buf) ((buf)->text->z_byte)
-/* Character position of gap in buffer. */
-#define BUF_GPT(buf) ((buf)->text.gpt)
+/* Address of beginning of buffer. */
+#define BUF_BEG_ADDR(buf) ((buf)->text->beg)
-/* Character position of end of accessible range of buffer. */
-#define BUF_ZV(buf) ((buf)->text.zv)
+/* Address of beginning of gap of buffer. */
+#define BUF_GPT_ADDR(buf) ((buf)->text->beg + (buf)->text->gpt_byte - BEG_BYTE)
-/* Character position of end of buffer. */
-#define BUF_Z(buf) ((buf)->text.z)
+/* Address of end of buffer. */
+#define BUF_Z_ADDR(buf) ((buf)->text->beg + (buf)->text->gap_size + (buf)->text->z_byte - BEG_BYTE)
-/* Is this buffer narrowed? */
-#define BUF_NARROWED(buf) ((BUF_BEGV(buf) != BUF_BEG(buf)) \
- || (BUF_ZV(buf) != BUF_Z(buf)))
+/* Address of end of gap in buffer. */
+#define BUF_GAP_END_ADDR(buf) ((buf)->text->beg + (buf)->text->gpt_byte + (buf)->text->gap_size - BEG_BYTE)
+
+/* Size of gap. */
+#define BUF_GAP_SIZE(buf) ((buf)->text->gap_size)
+
+/* Is this buffer narrowed? */
+#define BUF_NARROWED(buf) ((BUF_BEGV (buf) != BUF_BEG (buf)) \
+ || (BUF_ZV (buf) != BUF_Z (buf)))
/* Modification count. */
-#define BUF_MODIFF(buf) ((buf)->text.modiff)
+#define BUF_MODIFF(buf) ((buf)->text->modiff)
+
+/* Modification count as of last visit or save. */
+#define BUF_SAVE_MODIFF(buf) ((buf)->text->save_modiff)
+
+/* Overlay modification count. */
+#define BUF_OVERLAY_MODIFF(buf) ((buf)->text->overlay_modiff)
+
+/* Interval tree of buffer. */
+#define BUF_INTERVALS(buf) ((buf)->text->intervals)
+
+/* Marker chain of buffer. */
+#define BUF_MARKERS(buf) ((buf)->text->markers)
+
+#define BUF_UNCHANGED_MODIFIED(buf) \
+ ((buf)->text->unchanged_modified)
+
+#define BUF_OVERLAY_UNCHANGED_MODIFIED(buf) \
+ ((buf)->text->overlay_unchanged_modified)
+#define BUF_BEG_UNCHANGED(buf) ((buf)->text->beg_unchanged)
+#define BUF_END_UNCHANGED(buf) ((buf)->text->end_unchanged)
+
+#define UNCHANGED_MODIFIED \
+ BUF_UNCHANGED_MODIFIED (current_buffer)
+#define OVERLAY_UNCHANGED_MODIFIED \
+ BUF_OVERLAY_UNCHANGED_MODIFIED (current_buffer)
+#define BEG_UNCHANGED BUF_BEG_UNCHANGED (current_buffer)
+#define END_UNCHANGED BUF_END_UNCHANGED (current_buffer)
+
+/* Compute how many characters at the top and bottom of BUF are
+ unchanged when the range START..END is modified. This computation
+ must be done each time BUF is modified. */
+
+#define BUF_COMPUTE_UNCHANGED(buf, start, end) \
+ do \
+ { \
+ if (BUF_UNCHANGED_MODIFIED (buf) == BUF_MODIFF (buf) \
+ && (BUF_OVERLAY_UNCHANGED_MODIFIED (buf) \
+ == BUF_OVERLAY_MODIFF (buf))) \
+ { \
+ BUF_BEG_UNCHANGED (buf) = (start) - BUF_BEG (buf); \
+ BUF_END_UNCHANGED (buf) = BUF_Z (buf) - (end); \
+ } \
+ else \
+ { \
+ if (BUF_Z (buf) - (end) < BUF_END_UNCHANGED (buf)) \
+ BUF_END_UNCHANGED (buf) = BUF_Z (buf) - (end); \
+ if ((start) - BUF_BEG (buf) < BUF_BEG_UNCHANGED (buf)) \
+ BUF_BEG_UNCHANGED (buf) = (start) - BUF_BEG (buf); \
+ } \
+ } \
+ while (0)
-/* Address of beginning of buffer. */
-#define BUF_BEG_ADDR(buf) ((buf)->text.beg)
+\f
+/* Macros to set PT in the current buffer, or another buffer. */
-/* Macro for setting the value of BUF_ZV (BUF) to VALUE,
- by varying the end of the accessible region. */
-#define SET_BUF_ZV(buf, value) ((buf)->text.zv = (value))
-#define SET_BUF_PT(buf, value) ((buf)->text.pt = (value))
+#define SET_PT(position) (set_point (current_buffer, (position)))
+#define TEMP_SET_PT(position) (temp_set_point (current_buffer, (position)))
-/* Size of gap. */
-#define BUF_GAP_SIZE(buf) ((buf)->text.gap_size)
+#define SET_PT_BOTH(position, byte) \
+ (set_point_both (current_buffer, (position), (byte)))
+#define TEMP_SET_PT_BOTH(position, byte) \
+ (temp_set_point_both (current_buffer, (position), (byte)))
+
+#define BUF_SET_PT(buffer, position) \
+ (set_point ((buffer), (position)))
+#define BUF_TEMP_SET_PT(buffer, position) \
+ (temp_set_point ((buffer), (position)))
-/* Return the address of character at position POS in buffer BUF.
+extern void set_point P_ ((struct buffer *, int));
+extern INLINE void temp_set_point P_ ((struct buffer *, int));
+extern void set_point_both P_ ((struct buffer *, int, int));
+extern INLINE void temp_set_point_both P_ ((struct buffer *, int, int));
+extern void enlarge_buffer_text P_ ((struct buffer *, int));
+
+\f
+/* Macros for setting the BEGV, ZV or PT of a given buffer.
+
+ SET_BUF_PT* seet to be redundant. Get rid of them?
+
+ The ..._BOTH macros take both a charpos and a bytepos,
+ which must correspond to each other.
+
+ The macros without ..._BOTH take just a charpos,
+ and compute the bytepos from it. */
+
+#define SET_BUF_BEGV(buf, charpos) \
+ ((buf)->begv_byte = buf_charpos_to_bytepos ((buf), (charpos)), \
+ (buf)->begv = (charpos))
+
+#define SET_BUF_ZV(buf, charpos) \
+ ((buf)->zv_byte = buf_charpos_to_bytepos ((buf), (charpos)), \
+ (buf)->zv = (charpos))
+
+#define SET_BUF_BEGV_BOTH(buf, charpos, byte) \
+ ((buf)->begv = (charpos), \
+ (buf)->begv_byte = (byte))
+
+#define SET_BUF_ZV_BOTH(buf, charpos, byte) \
+ ((buf)->zv = (charpos), \
+ (buf)->zv_byte = (byte))
+
+#define SET_BUF_PT_BOTH(buf, charpos, byte) \
+ ((buf)->pt = (charpos), \
+ (buf)->pt_byte = (byte))
+\f
+/* Macros to access a character or byte in the current buffer,
+ or convert between a byte position and an address.
+ These macros do not check that the position is in range. */
+
+/* Access a Lisp position value in POS,
+ and store the charpos in CHARPOS and the bytepos in BYTEPOS. */
+
+#define DECODE_POSITION(charpos, bytepos, pos) \
+if (1) \
+ { \
+ Lisp_Object __pos = (pos); \
+ if (NUMBERP (__pos)) \
+ { \
+ charpos = __pos; \
+ bytepos = buf_charpos_to_bytepos (current_buffer, __pos); \
+ } \
+ else if (MARKERP (__pos)) \
+ { \
+ charpos = marker_position (__pos); \
+ bytepos = marker_byte_position (__pos); \
+ } \
+ else \
+ wrong_type_argument (Qinteger_or_marker_p, __pos); \
+ } \
+else
+
+/* Return the address of byte position N in current buffer. */
+
+#define BYTE_POS_ADDR(n) \
+ (((n) >= GPT_BYTE ? GAP_SIZE : 0) + (n) + BEG_ADDR - BEG_BYTE)
+
+/* Return the address of char position N. */
+
+#define CHAR_POS_ADDR(n) \
+ (((n) >= GPT ? GAP_SIZE : 0) \
+ + buf_charpos_to_bytepos (current_buffer, n) \
+ + BEG_ADDR - BEG_BYTE)
+
+/* Convert a character position to a byte position. */
+
+#define CHAR_TO_BYTE(charpos) \
+ (buf_charpos_to_bytepos (current_buffer, charpos))
+
+/* Convert a byte position to a character position. */
+
+#define BYTE_TO_CHAR(bytepos) \
+ (buf_bytepos_to_charpos (current_buffer, bytepos))
+
+/* Convert PTR, the address of a byte in the buffer, into a byte position. */
+
+#define PTR_BYTE_POS(ptr) \
+((ptr) - (current_buffer)->text->beg \
+ - (ptr - (current_buffer)->text->beg <= (unsigned) (GPT_BYTE - BEG_BYTE) ? 0 : GAP_SIZE) \
+ + BEG_BYTE)
+
+/* Return character at position POS. */
+
+#define FETCH_CHAR(pos) \
+ (!NILP (current_buffer->enable_multibyte_characters) \
+ ? FETCH_MULTIBYTE_CHAR ((pos)) \
+ : FETCH_BYTE ((pos)))
+
+/* Return the byte at byte position N. */
+
+#define FETCH_BYTE(n) *(BYTE_POS_ADDR ((n)))
+
+/* Variables used locally in FETCH_MULTIBYTE_CHAR. */
+extern unsigned char *_fetch_multibyte_char_p;
+extern int _fetch_multibyte_char_len;
+
+/* Return character code of multi-byte form at position POS. If POS
+ doesn't point the head of valid multi-byte form, only the byte at
+ POS is returned. No range checking. */
+
+#define FETCH_MULTIBYTE_CHAR(pos) \
+ (_fetch_multibyte_char_p = (((pos) >= GPT_BYTE ? GAP_SIZE : 0) \
+ + (pos) + BEG_ADDR - BEG_BYTE), \
+ _fetch_multibyte_char_len \
+ = ((pos) >= GPT_BYTE ? ZV_BYTE : GPT_BYTE) - (pos), \
+ STRING_CHAR (_fetch_multibyte_char_p, _fetch_multibyte_char_len))
+\f
+/* Macros for accessing a character or byte,
+ or converting between byte positions and addresses,
+ in a specified buffer. */
+
+/* Return the address of character at byte position POS in buffer BUF.
Note that both arguments can be computed more than once. */
+
+#define BUF_BYTE_ADDRESS(buf, pos) \
+((buf)->text->beg + (pos) - BEG_BYTE \
+ + ((pos) >= (buf)->text->gpt_byte ? (buf)->text->gap_size : 0))
+
+/* Return the address of character at char position POS in buffer BUF.
+ Note that both arguments can be computed more than once. */
+
#define BUF_CHAR_ADDRESS(buf, pos) \
-((buf)->text.beg + (pos) - 1 \
- + ((pos) >= (buf)->text.gpt ? (buf)->text.gap_size : 0))
-
-/* Convert the address of a char in the buffer into a character position. */
-#define PTR_CHAR_POS(ptr) \
-((ptr) - (current_buffer)->text.beg \
- - (ptr - (current_buffer)->text.beg < (unsigned) GPT ? 0 : GAP_SIZE) \
- + 1)
-
-/* Convert the address of a char in the buffer into a character position. */
-#define BUF_PTR_CHAR_POS(buf, ptr) \
-((ptr) - (buf)->text.beg \
- - (ptr - (buf)->text.beg < (unsigned) BUF_GPT ((buf)) \
- ? 0 : BUF_GAP_SIZE ((buf))) \
- + 1)
+((buf)->text->beg + buf_charpos_to_bytepos ((buf), (pos)) - BEG_BYTE \
+ + ((pos) >= (buf)->text->gpt ? (buf)->text->gap_size : 0))
+
+/* Convert PTR, the address of a char in buffer BUF,
+ into a character position. */
+
+#define BUF_PTR_BYTE_POS(buf, ptr) \
+((ptr) - (buf)->text->beg \
+ - (ptr - (buf)->text->beg <= (unsigned) (BUF_GPT_BYTE ((buf)) - BEG_BYTE)\
+ ? 0 : BUF_GAP_SIZE ((buf))) \
+ + BEG_BYTE)
+
+/* Return the character at byte position POS in buffer BUF. */
+
+#define BUF_FETCH_CHAR(buf, pos) \
+ (!NILP (buf->enable_multibyte_characters) \
+ ? BUF_FETCH_MULTIBYTE_CHAR ((buf), (pos)) \
+ : BUF_FETCH_BYTE ((buf), (pos)))
+
+/* Return the byte at byte position N in buffer BUF. */
+
+#define BUF_FETCH_BYTE(buf, n) \
+ *(BUF_BYTE_ADDRESS ((buf), (n)))
+
+/* Return character code of multi-byte form at byte position POS in BUF.
+ If POS doesn't point the head of valid multi-byte form, only the byte at
+ POS is returned. No range checking. */
+
+#define BUF_FETCH_MULTIBYTE_CHAR(buf, pos) \
+ (_fetch_multibyte_char_p \
+ = (((pos) >= BUF_GPT_BYTE (buf) ? BUF_GAP_SIZE (buf) : 0) \
+ + (pos) + BUF_BEG_ADDR (buf) - BEG_BYTE), \
+ _fetch_multibyte_char_len \
+ = (((pos) >= BUF_GPT_BYTE (buf) ? BUF_ZV_BYTE (buf) : BUF_GPT_BYTE (buf)) \
+ - (pos)), \
+ STRING_CHAR (_fetch_multibyte_char_p, _fetch_multibyte_char_len))
\f
+/* Define the actual buffer data structures. */
+
+/* This data structure describes the actual text contents of a buffer.
+ It is shared between indirect buffers and their base buffer. */
+
struct buffer_text
{
- unsigned char *beg; /* Actual address of buffer contents. */
- int begv; /* Index of beginning of accessible range. */
- int pt; /* Position of point in buffer. */
- int gpt; /* Index of gap in buffer. */
- int zv; /* Index of end of accessible range. */
- int z; /* Index of end of buffer. */
- int gap_size; /* Size of buffer's gap */
+ /* Actual address of buffer contents. If REL_ALLOC is defined,
+ this address might change when blocks are relocated which can
+ e.g. happen when malloc is called. So, don't pass a pointer
+ into a buffer's text to functions that malloc. */
+ unsigned char *beg;
+
+ EMACS_INT gpt; /* Char pos of gap in buffer. */
+ EMACS_INT z; /* Char pos of end of buffer. */
+ EMACS_INT gpt_byte; /* Byte pos of gap in buffer. */
+ EMACS_INT z_byte; /* Byte pos of end of buffer. */
+ EMACS_INT gap_size; /* Size of buffer's gap. */
int modiff; /* This counts buffer-modification events
for this buffer. It is incremented for
each such event, and never otherwise
changed. */
- };
+ int save_modiff; /* Previous value of modiff, as of last
+ time buffer visited or saved a file. */
-struct buffer
- {
- /* Everything before the `name' slot must be of a non-Lisp_Object type,
- and every slot after `name' must be a Lisp_Object.
-
- Check out mark_buffer (alloc.c) to see why.
- */
-
- /* This structure holds the coordinates of the buffer contents. */
- struct buffer_text text;
- /* Next buffer, in chain of all buffers including killed buffers.
- This chain is used only for garbage collection, in order to
- collect killed buffers properly. */
- struct buffer *next;
- /* Flags saying which DEFVAR_PER_BUFFER variables
- are local to this buffer. */
- int local_var_flags;
- /* Value of text.modiff as of when visited file was read or written. */
- int save_modified;
- /* Set to the modtime of the visited file when read or written.
- -1 means visited file was nonexistent.
- 0 means visited file modtime unknown; in no case complain
- about any mismatch on next save attempt. */
- int modtime;
- /* the value of text.modiff at the last auto-save. */
- int auto_save_modified;
- /* The time at which we detected a failure to auto-save,
- Or -1 if we didn't have a failure. */
- int auto_save_failure_time;
- /* Position in buffer at which display started
- the last time this buffer was displayed */
- int last_window_start;
-
- /* Properties of this buffer's text -- conditionally compiled. */
- DECLARE_INTERVALS
-
- /* This is a special exception -- as this slot should not be
- marked by gc_sweep, and as it is not lisp-accessible as
- a local variable -- so we regard it as not really being of type
- Lisp_Object */
- /* the markers that refer to this buffer.
+ int overlay_modiff; /* Counts modifications to overlays. */
+
+ /* Minimum value of GPT - BEG since last redisplay that finished. */
+ EMACS_INT beg_unchanged;
+
+ /* Minimum value of Z - GPT since last redisplay that finished. */
+ EMACS_INT end_unchanged;
+
+ /* MODIFF as of last redisplay that finished; if it matches MODIFF,
+ beg_unchanged and end_unchanged contain no useful information. */
+ int unchanged_modified;
+
+ /* BUF_OVERLAY_MODIFF of current buffer, as of last redisplay that
+ finished; if it matches BUF_OVERLAY_MODIFF, beg_unchanged and
+ end_unchanged contain no useful information. */
+ int overlay_unchanged_modified;
+
+ /* Properties of this buffer's text. */
+ INTERVAL intervals;
+
+ /* The markers that refer to this buffer.
This is actually a single marker ---
successive elements in its marker `chain'
- are the other markers referring to this
- buffer */
- Lisp_Object markers;
-
- /* If the long line scan cache is enabled (i.e. the buffer-local
- variable cache-long-line-scans is non-nil), newline_cache
- points to the newline cache, and width_run_cache points to the
- width run cache.
-
- The newline cache records which stretches of the buffer are
- known *not* to contain newlines, so that they can be skipped
- quickly when we search for newlines.
-
- The width run cache records which stretches of the buffer are
- known to contain characters whose widths are all the same. If
- the width run cache maps a character to a value > 0, that value is
- the character's width; if it maps a character to zero, we don't
- know what its width is. This allows compute_motion to process
- such regions very quickly, using algebra instead of inspecting
- each character. See also width_table, below. */
- struct region_cache *newline_cache;
- struct region_cache *width_run_cache;
-
- /* Everything from here down must be a Lisp_Object */
-
-
- /* the name of this buffer */
- Lisp_Object name;
- /* Nuked: buffer number, assigned when buffer made Lisp_Object number;*/
- /* the name of the file associated with this buffer */
- Lisp_Object filename;
- /* Dir for expanding relative pathnames */
- Lisp_Object directory;
- /* true iff this buffer has been backed
- up (if you write to its associated file
- and it hasn't been backed up, then a
- backup will be made) */
- /* This isn't really used by the C code, so could be deleted. */
- Lisp_Object backed_up;
- /* Length of file when last read or saved. */
- Lisp_Object save_length;
- /* file name used for auto-saving this buffer */
- Lisp_Object auto_save_file_name;
- /* Non-nil if buffer read-only */
- Lisp_Object read_only;
- /* "The mark"; no longer allowed to be nil */
- Lisp_Object mark;
-
- /* Alist of elements (SYMBOL . VALUE-IN-THIS-BUFFER)
- for all per-buffer variables of this buffer. */
- Lisp_Object local_var_alist;
-
-
- /* Symbol naming major mode (eg lisp-mode) */
- Lisp_Object major_mode;
- /* Pretty name of major mode (eg "Lisp") */
- Lisp_Object mode_name;
- /* Format string for mode line */
- Lisp_Object mode_line_format;
-
- /* Keys that are bound local to this buffer */
- Lisp_Object keymap;
- /* This buffer's local abbrev table */
- Lisp_Object abbrev_table;
- /* This buffer's syntax table. */
- Lisp_Object syntax_table;
-
- /* Values of several buffer-local variables */
- /* tab-width is buffer-local so that redisplay can find it
- in buffers that are not current */
- Lisp_Object case_fold_search;
- Lisp_Object tab_width;
- Lisp_Object fill_column;
- Lisp_Object left_margin;
- /* Function to call when insert space past fill column */
- Lisp_Object auto_fill_function;
-#ifdef MSDOS
- /* nil: text, t: binary. */
- Lisp_Object buffer_file_type;
-#endif
+ are the other markers referring to this buffer. */
+ struct Lisp_Marker *markers;
+ };
- /* String of length 256 mapping each char to its lower-case version. */
- Lisp_Object downcase_table;
- /* String of length 256 mapping each char to its upper-case version. */
- Lisp_Object upcase_table;
-
- /* Non-nil means do not display continuation lines */
- Lisp_Object truncate_lines;
- /* Non-nil means display ctl chars with uparrow */
- Lisp_Object ctl_arrow;
- /* Non-nil means do selective display;
- See doc string in syms_of_buffer (buffer.c) for details. */
- Lisp_Object selective_display;
+/* This is the structure that the buffer Lisp object points to. */
+
+struct buffer
+{
+ /* Everything before the `name' slot must be of a non-Lisp_Object type,
+ and every slot after `name' must be a Lisp_Object.
+
+ Check out mark_buffer (alloc.c) to see why. */
+
+ EMACS_INT size;
+
+ /* Next buffer, in chain of all buffers including killed buffers.
+ This chain is used only for garbage collection, in order to
+ collect killed buffers properly.
+ Note that vectors and most pseudovectors are all on one chain,
+ but buffers are on a separate chain of their own. */
+ struct buffer *next;
+
+ /* This structure holds the coordinates of the buffer contents
+ in ordinary buffers. In indirect buffers, this is not used. */
+ struct buffer_text own_text;
+
+ /* This points to the `struct buffer_text' that used for this buffer.
+ In an ordinary buffer, this is the own_text field above.
+ In an indirect buffer, this is the own_text field of another buffer. */
+ struct buffer_text *text;
+
+ /* Char position of point in buffer. */
+ EMACS_INT pt;
+ /* Byte position of point in buffer. */
+ EMACS_INT pt_byte;
+ /* Char position of beginning of accessible range. */
+ EMACS_INT begv;
+ /* Byte position of beginning of accessible range. */
+ EMACS_INT begv_byte;
+ /* Char position of end of accessible range. */
+ EMACS_INT zv;
+ /* Byte position of end of accessible range. */
+ EMACS_INT zv_byte;
+
+ /* In an indirect buffer, this points to the base buffer.
+ In an ordinary buffer, it is 0. */
+ struct buffer *base_buffer;
+
+ /* A non-zero value in slot IDX means that per-buffer variable
+ with index IDX has a local value in this buffer. The index IDX
+ for a buffer-local variable is stored in that variable's slot
+ in buffer_local_flags as a Lisp integer. If the index is -1,
+ this means the variable is always local in all buffers. */
+#define MAX_PER_BUFFER_VARS 50
+ char local_flags[MAX_PER_BUFFER_VARS];
+
+ /* Set to the modtime of the visited file when read or written.
+ -1 means visited file was nonexistent.
+ 0 means visited file modtime unknown; in no case complain
+ about any mismatch on next save attempt. */
+ int modtime;
+ /* The value of text->modiff at the last auto-save. */
+ int auto_save_modified;
+ /* The value of text->modiff at the last display error.
+ Redisplay of this buffer is inhibited until it changes again. */
+ int display_error_modiff;
+ /* The time at which we detected a failure to auto-save,
+ Or -1 if we didn't have a failure. */
+ int auto_save_failure_time;
+ /* Position in buffer at which display started
+ the last time this buffer was displayed. */
+ EMACS_INT last_window_start;
+
+ /* Set nonzero whenever the narrowing is changed in this buffer. */
+ int clip_changed;
+
+ /* If the long line scan cache is enabled (i.e. the buffer-local
+ variable cache-long-line-scans is non-nil), newline_cache
+ points to the newline cache, and width_run_cache points to the
+ width run cache.
+
+ The newline cache records which stretches of the buffer are
+ known *not* to contain newlines, so that they can be skipped
+ quickly when we search for newlines.
+
+ The width run cache records which stretches of the buffer are
+ known to contain characters whose widths are all the same. If
+ the width run cache maps a character to a value > 0, that value is
+ the character's width; if it maps a character to zero, we don't
+ know what its width is. This allows compute_motion to process
+ such regions very quickly, using algebra instead of inspecting
+ each character. See also width_table, below. */
+ struct region_cache *newline_cache;
+ struct region_cache *width_run_cache;
+
+ /* Non-zero means don't use redisplay optimizations for
+ displaying this buffer. */
+ unsigned prevent_redisplay_optimizations_p : 1;
+
+ /* List of overlays that end at or before the current center,
+ in order of end-position. */
+ struct Lisp_Overlay *overlays_before;
+
+ /* List of overlays that end after the current center,
+ in order of start-position. */
+ struct Lisp_Overlay *overlays_after;
+
+ /* Position where the overlay lists are centered. */
+ EMACS_INT overlay_center;
+
+ /* Everything from here down must be a Lisp_Object. */
+
+ /* The name of this buffer. */
+ Lisp_Object name;
+
+ /* The name of the file visited in this buffer, or nil. */
+ Lisp_Object filename;
+ /* Dir for expanding relative file names. */
+ Lisp_Object directory;
+ /* True iff this buffer has been backed up (if you write to the
+ visited file and it hasn't been backed up, then a backup will
+ be made). */
+ /* This isn't really used by the C code, so could be deleted. */
+ Lisp_Object backed_up;
+ /* Length of file when last read or saved.
+ This is not in the struct buffer_text
+ because it's not used in indirect buffers at all. */
+ Lisp_Object save_length;
+ /* File name used for auto-saving this buffer.
+ This is not in the struct buffer_text
+ because it's not used in indirect buffers at all. */
+ Lisp_Object auto_save_file_name;
+
+ /* Non-nil if buffer read-only. */
+ Lisp_Object read_only;
+ /* "The mark". This is a marker which may
+ point into this buffer or may point nowhere. */
+ Lisp_Object mark;
+
+ /* Alist of elements (SYMBOL . VALUE-IN-THIS-BUFFER)
+ for all per-buffer variables of this buffer. */
+ Lisp_Object local_var_alist;
+
+ /* Symbol naming major mode (eg, lisp-mode). */
+ Lisp_Object major_mode;
+ /* Pretty name of major mode (eg, "Lisp"). */
+ Lisp_Object mode_name;
+ /* Mode line element that controls format of mode line. */
+ Lisp_Object mode_line_format;
+
+ /* Changes in the buffer are recorded here for undo.
+ t means don't record anything.
+ This information belongs to the base buffer of an indirect buffer,
+ But we can't store it in the struct buffer_text
+ because local variables have to be right in the struct buffer.
+ So we copy it around in set_buffer_internal.
+ This comes before `name' because it is marked in a special way. */
+ Lisp_Object undo_list;
+
+ /* Analogous to mode_line_format for the line displayed at the top
+ of windows. Nil means don't display that line. */
+ Lisp_Object header_line_format;
+
+ /* Keys that are bound local to this buffer. */
+ Lisp_Object keymap;
+ /* This buffer's local abbrev table. */
+ Lisp_Object abbrev_table;
+ /* This buffer's syntax table. */
+ Lisp_Object syntax_table;
+ /* This buffer's category table. */
+ Lisp_Object category_table;
+
+ /* Values of several buffer-local variables. */
+ /* tab-width is buffer-local so that redisplay can find it
+ in buffers that are not current. */
+ Lisp_Object case_fold_search;
+ Lisp_Object tab_width;
+ Lisp_Object fill_column;
+ Lisp_Object left_margin;
+ /* Function to call when insert space past fill column. */
+ Lisp_Object auto_fill_function;
+ /* nil: text, t: binary.
+ This value is meaningful only on certain operating systems. */
+ /* Actually, we don't need this flag any more because end-of-line
+ is handled correctly according to the buffer-file-coding-system
+ of the buffer. Just keeping it for backward compatibility. */
+ Lisp_Object buffer_file_type;
+
+ /* Case table for case-conversion in this buffer.
+ This char-table maps each char into its lower-case version. */
+ Lisp_Object downcase_table;
+ /* Char-table mapping each char to its upper-case version. */
+ Lisp_Object upcase_table;
+ /* Char-table for conversion for case-folding search. */
+ Lisp_Object case_canon_table;
+ /* Char-table of equivalences for case-folding search. */
+ Lisp_Object case_eqv_table;
+
+ /* Non-nil means do not display continuation lines. */
+ Lisp_Object truncate_lines;
+ /* Non-nil means display ctl chars with uparrow. */
+ Lisp_Object ctl_arrow;
+ /* Non-nil means display text from right to left. */
+ Lisp_Object direction_reversed;
+ /* Non-nil means do selective display;
+ see doc string in syms_of_buffer (buffer.c) for details. */
+ Lisp_Object selective_display;
#ifndef old
- /* Non-nil means show ... at end of line followed by invisible lines. */
- Lisp_Object selective_display_ellipses;
+ /* Non-nil means show ... at end of line followed by invisible lines. */
+ Lisp_Object selective_display_ellipses;
#endif
- /* Alist of (FUNCTION . STRING) for each minor mode enabled in buffer. */
- Lisp_Object minor_modes;
- /* t if "self-insertion" should overwrite; `binary' if it should also
- overwrite newlines and tabs - for editing executables and the like. */
- Lisp_Object overwrite_mode;
- /* non-nil means abbrev mode is on. Expand abbrevs automatically. */
- Lisp_Object abbrev_mode;
- /* Display table to use for text in this buffer. */
- Lisp_Object display_table;
- /* Translate table for case-folding search. */
- Lisp_Object case_canon_table;
- /* Inverse translate (equivalence class) table for case-folding search. */
- Lisp_Object case_eqv_table;
- /* Changes in the buffer are recorded here for undo.
- t means don't record anything. */
- Lisp_Object undo_list;
- /* t means the mark and region are currently active. */
- Lisp_Object mark_active;
-
- /* List of overlays that end at or before the current center,
- in order of end-position. */
- Lisp_Object overlays_before;
-
- /* List of overlays that end after the current center,
- in order of start-position. */
- Lisp_Object overlays_after;
-
- /* Position where the overlay lists are centered. */
- Lisp_Object overlay_center;
-
- /* True if the newline position cache and width run cache are
- enabled. See search.c and indent.c. */
- Lisp_Object cache_long_line_scans;
-
- /* If the width run cache is enabled, this table contains the
- character widths width_run_cache (see above) assumes. When we
- do a thorough redisplay, we compare this against the buffer's
- current display table to see whether the display table has
- affected the widths of any characters. If it has, we
- invalidate the width run cache, and re-initialize width_table. */
- Lisp_Object width_table;
+ /* Alist of (FUNCTION . STRING) for each minor mode enabled in buffer. */
+ Lisp_Object minor_modes;
+ /* t if "self-insertion" should overwrite; `binary' if it should also
+ overwrite newlines and tabs - for editing executables and the like. */
+ Lisp_Object overwrite_mode;
+ /* non-nil means abbrev mode is on. Expand abbrevs automatically. */
+ Lisp_Object abbrev_mode;
+ /* Display table to use for text in this buffer. */
+ Lisp_Object display_table;
+ /* t means the mark and region are currently active. */
+ Lisp_Object mark_active;
+
+ /* Non-nil means the buffer contents are regarded as multi-byte
+ form of characters, not a binary code. */
+ Lisp_Object enable_multibyte_characters;
+
+ /* Coding system to be used for encoding the buffer contents on
+ saving. */
+ Lisp_Object buffer_file_coding_system;
+
+ /* List of symbols naming the file format used for visited file. */
+ Lisp_Object file_format;
+
+ /* List of symbols naming the file format used for auto-save file. */
+ Lisp_Object auto_save_file_format;
+
+ /* True if the newline position cache and width run cache are
+ enabled. See search.c and indent.c. */
+ Lisp_Object cache_long_line_scans;
+
+ /* If the width run cache is enabled, this table contains the
+ character widths width_run_cache (see above) assumes. When we
+ do a thorough redisplay, we compare this against the buffer's
+ current display table to see whether the display table has
+ affected the widths of any characters. If it has, we
+ invalidate the width run cache, and re-initialize width_table. */
+ Lisp_Object width_table;
+
+ /* In an indirect buffer, or a buffer that is the base of an
+ indirect buffer, this holds a marker that records
+ PT for this buffer when the buffer is not current. */
+ Lisp_Object pt_marker;
+
+ /* In an indirect buffer, or a buffer that is the base of an
+ indirect buffer, this holds a marker that records
+ BEGV for this buffer when the buffer is not current. */
+ Lisp_Object begv_marker;
+
+ /* In an indirect buffer, or a buffer that is the base of an
+ indirect buffer, this holds a marker that records
+ ZV for this buffer when the buffer is not current. */
+ Lisp_Object zv_marker;
+
+ /* This holds the point value before the last scroll operation.
+ Explicitly setting point sets this to nil. */
+ Lisp_Object point_before_scroll;
+
+ /* Truename of the visited file, or nil. */
+ Lisp_Object file_truename;
+
+ /* Invisibility spec of this buffer.
+ t => any non-nil `invisible' property means invisible.
+ A list => `invisible' property means invisible
+ if it is memq in that list. */
+ Lisp_Object invisibility_spec;
+
+ /* This is the last window that was selected with this buffer in it,
+ or nil if that window no longer displays this buffer. */
+ Lisp_Object last_selected_window;
+
+ /* Incremented each time the buffer is displayed in a window. */
+ Lisp_Object display_count;
+
+ /* Widths of left and right marginal areas for windows displaying
+ this buffer. */
+ Lisp_Object left_margin_cols, right_margin_cols;
+
+ /* Widths of left and right fringe areas for windows displaying
+ this buffer. */
+ Lisp_Object left_fringe_width, right_fringe_width;
+
+ /* Non-nil means fringes are drawn outside display margins;
+ othersize draw them between margin areas and text. */
+ Lisp_Object fringes_outside_margins;
+
+ /* Width and type of scroll bar areas for windows displaying
+ this buffer. */
+ Lisp_Object scroll_bar_width, vertical_scroll_bar_type;
+
+ /* Non-nil means indicate lines not displaying text (in a style
+ like vi). */
+ Lisp_Object indicate_empty_lines;
+
+ /* Non-nil means indicate buffer boundaries and scrolling. */
+ Lisp_Object indicate_buffer_boundaries;
+
+ /* Time stamp updated each time this buffer is displayed in a window. */
+ Lisp_Object display_time;
+
+ /* If scrolling the display because point is below the bottom of a
+ window showing this buffer, try to choose a window start so
+ that point ends up this number of lines from the top of the
+ window. Nil means that scrolling method isn't used. */
+ Lisp_Object scroll_up_aggressively;
+
+ /* If scrolling the display because point is above the top of a
+ window showing this buffer, try to choose a window start so
+ that point ends up this number of lines from the bottom of the
+ window. Nil means that scrolling method isn't used. */
+ Lisp_Object scroll_down_aggressively;
+
+ /* Desired cursor type in this buffer. See the doc string of
+ per-buffer variable `cursor-type'. */
+ Lisp_Object cursor_type;
+
+ /* An integer > 0 means put that number of pixels below text lines
+ in the display of this buffer. */
+ Lisp_Object extra_line_spacing;
+
+ /* *Cursor type to display in non-selected windows.
+ t means to use hollow box cursor.
+ See `cursor-type' for other values. */
+ Lisp_Object cursor_in_non_selected_windows;
};
+
\f
/* This points to the current buffer. */
The value has only one nonzero bit.
When a buffer has its own local value for a slot,
- the bit for that slot (found in the same slot in this structure)
- is turned on in the buffer's local_var_flags slot.
+ the entry for that slot (found in the same slot in this structure)
+ is turned on in the buffer's local_flags array.
If a slot in this structure is zero, then even though there may
be a Lisp-level local variable for the slot, it has no default value,
buffer-local slots. If a slot contains Qnil, then the
corresponding buffer slot may contain a value of any type. If a
slot contains an integer, then prospective values' tags must be
- equal to that integer. When a tag does not match, the function
- buffer_slot_type_mismatch will signal an error. The value Qnil may
- always be safely stored in any slot. */
-extern struct buffer buffer_local_types;
-\f
-/* Point in the current buffer. This is an obsolete alias
- and should be eliminated. */
-#define point (current_buffer->text.pt + 0)
-
-/* Return character at position n. No range checking. */
-#define FETCH_CHAR(n) *(((n)>= GPT ? GAP_SIZE : 0) + (n) + BEG_ADDR - 1)
-
-/* BUFFER_CEILING_OF (resp. BUFFER_FLOOR_OF), when applied to n, return
- the max (resp. min) p such that
-
- &FETCH_CHAR (p) - &FETCH_CHAR (n) == p - n */
+ equal to that integer (except nil is always allowed).
+ When a tag does not match, the function
+ buffer_slot_type_mismatch will signal an error.
-#define BUFFER_CEILING_OF(n) (((n) < GPT && GPT < ZV ? GPT : ZV) - 1)
-#define BUFFER_FLOOR_OF(n) (BEGV <= GPT && GPT <= (n) ? GPT : BEGV)
+ If a slot here contains -1, the corresponding variable is read-only. */
-extern void reset_buffer ();
-extern void evaporate_overlays ();
-
-extern Lisp_Object Fbuffer_name ();
-extern Lisp_Object Fget_file_buffer ();
-extern Lisp_Object Fnext_overlay_change ();
-
-/* Functions to call before and after each text change. */
-extern Lisp_Object Vbefore_change_function;
-extern Lisp_Object Vafter_change_function;
+extern struct buffer buffer_local_types;
+\f
+extern void delete_all_overlays P_ ((struct buffer *));
+extern void reset_buffer P_ ((struct buffer *));
+extern void evaporate_overlays P_ ((EMACS_INT));
+extern int overlays_at P_ ((EMACS_INT, int, Lisp_Object **, int *, int *, int *, int));
+extern int sort_overlays P_ ((Lisp_Object *, int, struct window *));
+extern void recenter_overlay_lists P_ ((struct buffer *, EMACS_INT));
+extern int overlay_strings P_ ((EMACS_INT, struct window *, unsigned char **));
+extern void validate_region P_ ((Lisp_Object *, Lisp_Object *));
+extern void set_buffer_internal P_ ((struct buffer *));
+extern void set_buffer_internal_1 P_ ((struct buffer *));
+extern void set_buffer_temp P_ ((struct buffer *));
+extern void record_buffer P_ ((Lisp_Object));
+extern void buffer_slot_type_mismatch P_ ((int));
+extern void fix_overlays_before P_ ((struct buffer *, EMACS_INT, EMACS_INT));
+extern void mmap_set_vars P_ ((int));
+
+/* Get overlays at POSN into array OVERLAYS with NOVERLAYS elements.
+ If NEXTP is non-NULL, return next overlay there.
+ See overlay_at arg CHANGE_REQ for meaning of CHRQ arg. */
+
+#define GET_OVERLAYS_AT(posn, overlays, noverlays, nextp, chrq) \
+ do { \
+ int maxlen = 40; \
+ overlays = (Lisp_Object *) alloca (maxlen * sizeof (Lisp_Object)); \
+ noverlays = overlays_at (posn, 0, &overlays, &maxlen, \
+ nextp, NULL, chrq); \
+ if (noverlays > maxlen) \
+ { \
+ maxlen = noverlays; \
+ overlays = (Lisp_Object *) alloca (maxlen * sizeof (Lisp_Object)); \
+ noverlays = overlays_at (posn, 0, &overlays, &maxlen, \
+ nextp, NULL, chrq); \
+ } \
+ } while (0)
+
+EXFUN (Fbuffer_name, 1);
+EXFUN (Fget_file_buffer, 1);
+EXFUN (Fnext_overlay_change, 1);
+EXFUN (Fdelete_overlay, 1);
+EXFUN (Fbuffer_local_value, 2);
+EXFUN (Fgenerate_new_buffer_name, 2);
+
+/* Functions to call before and after each text change. */
extern Lisp_Object Vbefore_change_functions;
extern Lisp_Object Vafter_change_functions;
extern Lisp_Object Vfirst_change_hook;
+extern Lisp_Object Qbefore_change_functions;
+extern Lisp_Object Qafter_change_functions;
extern Lisp_Object Qfirst_change_hook;
+/* If nonzero, all modification hooks are suppressed. */
+extern int inhibit_modification_hooks;
+
extern Lisp_Object Vdeactivate_mark;
extern Lisp_Object Vtransient_mark_mode;
\f
/* Overlays */
/* 1 if the OV is an overlay object. */
+
#define OVERLAY_VALID(OV) (OVERLAYP (OV))
/* Return the marker that stands for where OV starts in the buffer. */
-#define OVERLAY_START(OV) (XCONS (XCONS ((OV))->car)->car)
+
+#define OVERLAY_START(OV) (XOVERLAY (OV)->start)
/* Return the marker that stands for where OV ends in the buffer. */
-#define OVERLAY_END(OV) (XCONS (XCONS ((OV))->car)->cdr)
+
+#define OVERLAY_END(OV) (XOVERLAY (OV)->end)
+
+/* Return the plist of overlay OV. */
+
+#define OVERLAY_PLIST(OV) XOVERLAY ((OV))->plist
/* Return the actual buffer position for the marker P.
We assume you know which buffer it's pointing into. */
-#define OVERLAY_POSITION(P) \
- (XGCTYPE ((P)) == Lisp_Marker ? marker_position ((P)) : (abort (), 0))
-
-/* Allocation of buffer text. */
-
-#ifdef REL_ALLOC
-#define BUFFER_ALLOC(data,size) ((unsigned char *) r_alloc (&data, (size)))
-#define BUFFER_REALLOC(data,size) ((unsigned char *) r_re_alloc (&data, (size)))
-#define BUFFER_FREE(data) (r_alloc_free (&data))
-#define R_ALLOC_DECLARE(var,data) (r_alloc_declare (&var, (data)))
-#else
-#define BUFFER_ALLOC(data,size) (data = (unsigned char *) malloc ((size)))
-#define BUFFER_REALLOC(data,size) ((unsigned char *) realloc ((data), (size)))
-#define BUFFER_FREE(data) (free ((data)))
-#define R_ALLOC_DECLARE(var,data)
-#endif
+#define OVERLAY_POSITION(P) \
+ (GC_MARKERP (P) ? marker_position (P) : (abort (), 0))
+
+\f
+/***********************************************************************
+ Buffer-local Variables
+ ***********************************************************************/
+
+/* Number of per-buffer variables used. */
+
+extern int last_per_buffer_idx;
+
+/* Return the offset in bytes of member VAR of struct buffer
+ from the start of a buffer structure. */
+
+#define PER_BUFFER_VAR_OFFSET(VAR) \
+ ((char *) &buffer_local_flags.VAR - (char *) &buffer_local_flags)
+
+/* Return the index of buffer-local variable VAR. Each per-buffer
+ variable has an index > 0 associated with it, except when it always
+ has buffer-local values, in which case the index is -1. If this is
+ 0, this is a bug and means that the slot of VAR in
+ buffer_local_flags wasn't intiialized. */
+
+#define PER_BUFFER_VAR_IDX(VAR) \
+ PER_BUFFER_IDX (PER_BUFFER_VAR_OFFSET (VAR))
+
+/* Value is non-zero if the variable with index IDX has a local value
+ in buffer B. */
+
+#define PER_BUFFER_VALUE_P(B, IDX) \
+ (((IDX) < 0 || IDX >= last_per_buffer_idx) \
+ ? (abort (), 0) \
+ : ((B)->local_flags[IDX] != 0))
+
+/* Set whether per-buffer variable with index IDX has a buffer-local
+ value in buffer B. VAL zero means it hasn't. */
+
+#define SET_PER_BUFFER_VALUE_P(B, IDX, VAL) \
+ do { \
+ if ((IDX) < 0 || (IDX) >= last_per_buffer_idx) \
+ abort (); \
+ (B)->local_flags[IDX] = (VAL); \
+ } while (0)
+
+/* Return the index value of the per-buffer variable at offset OFFSET
+ in the buffer structure.
+
+ If the slot OFFSET has a corresponding default value in
+ buffer_defaults, the index value is positive and has only one
+ nonzero bit. When a buffer has its own local value for a slot, the
+ bit for that slot (found in the same slot in this structure) is
+ turned on in the buffer's local_flags array.
+
+ If the index value is -1, even though there may be a
+ DEFVAR_PER_BUFFER for the slot, there is no default value for it;
+ and the corresponding slot in buffer_defaults is not used.
+
+ If the index value is -2, then there is no DEFVAR_PER_BUFFER for
+ the slot, but there is a default value which is copied into each
+ new buffer.
+
+ If a slot in this structure corresponding to a DEFVAR_PER_BUFFER is
+ zero, that is a bug */
+
+
+#define PER_BUFFER_IDX(OFFSET) \
+ XINT (*(Lisp_Object *)((OFFSET) + (char *) &buffer_local_flags))
+
+/* Return the default value of the per-buffer variable at offset
+ OFFSET in the buffer structure. */
+
+#define PER_BUFFER_DEFAULT(OFFSET) \
+ (*(Lisp_Object *)((OFFSET) + (char *) &buffer_defaults))
+
+/* Return the buffer-local value of the per-buffer variable at offset
+ OFFSET in the buffer structure. */
+
+#define PER_BUFFER_VALUE(BUFFER, OFFSET) \
+ (*(Lisp_Object *)((OFFSET) + (char *) (BUFFER)))
+
+/* Return the symbol of the per-buffer variable at offset OFFSET in
+ the buffer structure. */
+
+#define PER_BUFFER_SYMBOL(OFFSET) \
+ (*(Lisp_Object *)((OFFSET) + (char *) &buffer_local_symbols))
+
+/* Return the type of the per-buffer variable at offset OFFSET in the
+ buffer structure. */
+
+#define PER_BUFFER_TYPE(OFFSET) \
+ (*(Lisp_Object *)((OFFSET) + (char *) &buffer_local_types))
+
+/* arch-tag: 679305dd-d41c-4a50-b170-3caf5c97b2d1
+ (do not change this comment) */