-;;; view.el --- peruse file or buffer without editing.
+;;; view.el --- peruse file or buffer without editing
-;; Copyright (C) 1985, 1989, 1994, 1995, 1997 Free Software Foundation, Inc.
+;; Copyright (C) 1985, 1989, 1994, 1995, 1997, 2000, 2001, 2002,
+;; 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
;; Author: K. Shane Hartman
;; Maintainer: Inge Frick <inge@nada.kth.se>
+;; Keywords: files
;; This file is part of GNU Emacs.
;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 2, or (at your option)
+;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;; GNU Emacs is distributed in the hope that it will be useful,
;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING. If not, write to the
-;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-;; Boston, MA 02111-1307, USA.
+;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+;; Boston, MA 02110-1301, USA.
;;; Commentary:
;;
;; You could also bind view-file, view-buffer, view-buffer-other-window and
;; view-buffer-other-frame to keys.
-
+\f
;;; Code:
(defgroup view nil
:group 'wp
:group 'editing)
-(defcustom view-read-only nil
- "*Non-nil means buffers visiting files read-only, do it in view mode."
- :type 'boolean
- :group 'view)
-
(defcustom view-highlight-face 'highlight
"*The face used for highlighting the match found by View mode search."
:type 'face
;; is now controlled by the presence of a value in `view-return-to-alist'.
(defcustom view-scroll-auto-exit nil
"*Non-nil means scrolling past the end of buffer exits View mode.
-nil means attempting to scroll past the end of the buffer,
+A value of nil means attempting to scroll past the end of the buffer,
only rings the bell and gives a message on how to leave."
:type 'boolean
:group 'view)
(defcustom view-try-extend-at-buffer-end nil
- "*Non-nil means try load more of file when reaching end of buffer.
+ "*Non-nil means try to load more of file when reaching end of buffer.
This variable is mainly intended to be temporarily set to non-nil by
the F command in view-mode, but you can set it to t if you want the action
for all scroll commands in view mode."
:type 'boolean
:group 'view)
+(defcustom view-inhibit-help-message nil
+ "*Non-nil inhibits the help message shown upon entering View mode."
+ :type 'boolean
+ :group 'view
+ :version "22.1")
+
;;;###autoload
(defvar view-mode nil
"Non-nil if View mode is enabled.
"Normal hook run when starting to view a buffer or file."
:type 'hook
:group 'view)
-
+\f
(defvar view-old-buffer-read-only nil)
(make-variable-buffer-local 'view-old-buffer-read-only)
(defvar view-old-Helper-return-blurb)
(make-variable-buffer-local 'view-old-Helper-return-blurb)
+;; Just to avoid warnings.
+(defvar Helper-return-blurb)
+
(defvar view-page-size nil
"Default number of lines to scroll by View page commands.
-If nil then the local value of this is initially set to window size.")
+If nil that means use the window size.")
(make-variable-buffer-local 'view-page-size)
(defvar view-half-page-size nil
"Default number of lines to scroll by View half page commands.
-If nil then the local value of this is initially set to half window size.")
+If nil that means use half the window size.")
(make-variable-buffer-local 'view-half-page-size)
(defvar view-last-regexp nil)
See RETURN-TO-ALIST argument of function `view-mode-exit' for the format of
`view-return-to-alist'.")
(make-variable-buffer-local 'view-return-to-alist)
+(put 'view-return-to-alist 'permanent-local t)
(defvar view-exit-action nil
"nil or a function with one argument (a buffer) called when finished viewing.
This is local in each buffer, once it is used.")
(make-variable-buffer-local 'view-overlay)
-(or (assq 'view-mode minor-mode-alist)
- (setq minor-mode-alist
- (cons '(view-mode " View") minor-mode-alist)))
-
+(unless (assq 'view-mode minor-mode-alist)
+ (setq minor-mode-alist
+ (cons (list 'view-mode
+ (propertize " View"
+ 'local-map mode-line-minor-mode-keymap
+ 'help-echo "mouse-3: minor mode menu"))
+ minor-mode-alist)))
+\f
;; Define keymap inside defvar to make it easier to load changes.
;; Some redundant "less"-like key bindings below have been commented out.
(defvar view-mode-map
(define-key map "m" 'point-to-register)
(define-key map "'" 'register-to-point)
(define-key map "x" 'exchange-point-and-mark)
- (define-key map "@" 'View-back-to-mark)
+ (define-key map "@" 'View-back-to-mark)
(define-key map "." 'set-mark-command)
(define-key map "%" 'View-goto-percent)
; (define-key map "G" 'View-goto-line-last)
(define-key map "1" 'digit-argument)
(define-key map "0" 'digit-argument)
(define-key map "H" 'describe-mode)
- (define-key map "?" 'describe-mode) ; Maybe do as less instead?
+ (define-key map "?" 'describe-mode) ; Maybe do as less instead? See above.
(define-key map "h" 'describe-mode)
map))
(or (assq 'view-mode minor-mode-map-alist)
(setq minor-mode-map-alist
(cons (cons 'view-mode view-mode-map) minor-mode-map-alist)))
-
+\f
;;; Commands that enter or exit view mode.
;;;###autoload
-(defun view-file (file-name)
+(defun view-file (file)
"View FILE in View mode, returning to previous buffer when done.
Emacs commands editing the buffer contents are not available; instead,
a special set of commands (mostly letters and punctuation)
This command runs the normal hook `view-mode-hook'."
(interactive "fView file: ")
- (let ((had-a-buf (get-file-buffer file-name)))
- (view-buffer (find-file-noselect file-name)
- (and (not had-a-buf) 'kill-buffer))))
+ (unless (file-exists-p file) (error "%s does not exist" file))
+ (let ((had-a-buf (get-file-buffer file))
+ (buffer (find-file-noselect file)))
+ (if (eq (with-current-buffer buffer
+ (get major-mode 'mode-class))
+ 'special)
+ (progn
+ (switch-to-buffer buffer)
+ (message "Not using View mode because the major mode is special"))
+ (view-buffer buffer (and (not had-a-buf) 'kill-buffer)))))
;;;###autoload
-(defun view-file-other-window (file-name)
+(defun view-file-other-window (file)
"View FILE in View mode in another window.
Return that window to its previous buffer when done.
Emacs commands editing the buffer contents are not available; instead,
This command runs the normal hook `view-mode-hook'."
(interactive "fIn other window view file: ")
- (let ((had-a-buf (get-file-buffer file-name)))
- (view-buffer-other-window (find-file-noselect file-name) nil
+ (unless (file-exists-p file) (error "%s does not exist" file))
+ (let ((had-a-buf (get-file-buffer file)))
+ (view-buffer-other-window (find-file-noselect file) nil
(and (not had-a-buf) 'kill-buffer))))
;;;###autoload
-(defun view-file-other-frame (file-name)
+(defun view-file-other-frame (file)
"View FILE in View mode in another frame.
Maybe delete other frame and/or return to previous buffer when done.
Emacs commands editing the buffer contents are not available; instead,
This command runs the normal hook `view-mode-hook'."
(interactive "fIn other frame view file: ")
- (let ((had-a-buf (get-file-buffer file-name)))
- (view-buffer-other-frame (find-file-noselect file-name) nil
+ (unless (file-exists-p file) (error "%s does not exist" file))
+ (let ((had-a-buf (get-file-buffer file)))
+ (view-buffer-other-frame (find-file-noselect file) nil
(and (not had-a-buf) 'kill-buffer))))
;;;###autoload
-(defun view-buffer (buffer-name &optional exit-action)
+(defun view-buffer (buffer &optional exit-action)
"View BUFFER in View mode, returning to previous buffer when done.
Emacs commands editing the buffer contents are not available; instead,
a special set of commands (mostly letters and punctuation)
(interactive "bView buffer: ")
(let ((undo-window (list (window-buffer) (window-start) (window-point))))
- (switch-to-buffer buffer-name)
+ (switch-to-buffer buffer)
(view-mode-enter (cons (selected-window) (cons nil undo-window))
exit-action)))
;;;###autoload
-(defun view-buffer-other-window
- (buffer-name &optional not-return exit-action)
+(defun view-buffer-other-window (buffer &optional not-return exit-action)
"View BUFFER in View mode in another window.
Return to previous buffer when done, unless optional NOT-RETURN is non-nil.
Emacs commands editing the buffer contents are not available; instead,
(cons (selected-window)
(if (eq win (selected-window))
t ; Has to make new window.
- (list
+ (list
(window-buffer win) ; Other windows old buffer.
(window-start win)
(window-point win)))))))
- (switch-to-buffer-other-window buffer-name)
+ (switch-to-buffer-other-window buffer)
(view-mode-enter (and return-to (cons (selected-window) return-to))
exit-action)))
;;;###autoload
-(defun view-buffer-other-frame
- (buffer-name &optional not-return exit-action)
+(defun view-buffer-other-frame (buffer &optional not-return exit-action)
"View BUFFER in View mode in another frame.
Return to previous buffer when done, unless optional NOT-RETURN is non-nil.
Emacs commands editing the buffer contents are not available; instead,
(interactive "bView buffer in other frame: \nP")
(let ((return-to
(and (not not-return) (cons (selected-window) t)))) ; Old window.
- (switch-to-buffer-other-frame buffer-name)
+ (switch-to-buffer-other-frame buffer)
(view-mode-enter (and return-to (cons (selected-window) return-to))
exit-action)))
-
+\f
;;;###autoload
(defun view-mode (&optional arg)
;; In the following documentation string we have to use some explicit key
;; bindings instead of using the \\[] construction. The reason for this
;; is that most commands have more than one key binding.
"Toggle View mode, a minor mode for viewing text but not editing it.
-With arg, turn View mode on iff arg is positive.
+With prefix argument ARG, turn View mode on if ARG is positive, otherwise
+turn it off.
Emacs commands that do not change the buffer contents are available as usual.
Kill commands insert text in kill buffers but do not delete. Other commands
\\[beginning-of-buffer] move to the beginning of buffer.
> move to the end of buffer.
\\[View-scroll-to-buffer-end] scroll so that buffer end is at last line of window.
-SPC scroll forward prefix (default \"page size\") lines.
-DEL scroll backward prefix (default \"page size\") lines.
-\\[View-scroll-page-forward-set-page-size] like \\[View-scroll-page-forward] except prefix sets \"page size\".
-\\[View-scroll-page-backward-set-page-size] like \\[View-scroll-page-backward] except prefix sets \"page size\".
-\\[View-scroll-half-page-forward] scroll forward (and if prefix set) \"half page size\" lines.
-\\[View-scroll-half-page-backward] scroll backward (and if prefix set) \"half page size\" lines.
-RET, LFD scroll forward prefix (default one) line(s).
-y scroll backward prefix (default one) line(s).
+SPC scroll forward \"page size\" lines.
+ With prefix scroll forward prefix lines.
+DEL scroll backward \"page size\" lines.
+ With prefix scroll backward prefix lines.
+\\[View-scroll-page-forward-set-page-size] like \\[View-scroll-page-forward] but with prefix sets \"page size\" to prefix.
+\\[View-scroll-page-backward-set-page-size] like \\[View-scroll-page-backward] but with prefix sets \"page size\" to prefix.
+\\[View-scroll-half-page-forward] scroll forward \"half page size\" lines. With prefix, sets
+ \"half page size\" to prefix lines and scrolls forward that much.
+\\[View-scroll-half-page-backward] scroll backward \"half page size\" lines. With prefix, sets
+ \"half page size\" to prefix lines and scrolls backward that much.
+RET, LFD scroll forward one line. With prefix scroll forward prefix line(s).
+y scroll backward one line. With prefix scroll backward prefix line(s).
\\[View-revert-buffer-scroll-page-forward] revert-buffer if necessary and scroll forward.
Use this to view a changing file.
\\[what-line] prints the current line number.
\\ searches backward for regular expression, starting before current page.
\\[View-search-last-regexp-forward] searches forward for last regular expression.
p searches backward for last regular expression.
-\\[View-quit] quit View mode, trying to restore window and buffer to previous state.
+\\[View-quit] quit View mode, restoring this window and buffer to previous state.
\\[View-quit] is the normal way to leave view mode.
\\[View-exit] exit View mode but stay in current buffer. Use this if you started
viewing a buffer (file) and find out you want to edit it.
-\\[View-exit-and-edit] exit View mode and make the current buffer editable.
-\\[View-quit-all] quit View mode, trying to restore windows and buffer to previous state.
+ This command restores the previous read-only status of the buffer.
+\\[View-exit-and-edit] exit View mode, and make the current buffer editable
+ even if it was not editable before entry to View mode.
+\\[View-quit-all] quit View mode, restoring all windows to previous state.
\\[View-leave] quit View mode and maybe switch buffers, but don't kill this buffer.
\\[View-kill-and-leave] quit View mode, kill current buffer and go back to other buffer.
-The effect of \\[View-leave] , \\[View-quit] and \\[View-kill-and-leave] depends on how view-mode was entered. If it was
-entered by view-file, view-file-other-window or view-file-other-frame (\\[view-file],
-\\[view-file-other-window], \\[view-file-other-frame] or the dired mode v command), then \\[View-quit] will try to kill the
-current buffer. If view-mode was entered from another buffer as is done by
-View-buffer, View-buffer-other-window, View-buffer-other frame, View-file,
-View-file-other-window or View-file-other-frame then \\[view-leave] , \\[view-quit] and \\[view-kill-and-leave] will return
-to that buffer.
+The effect of \\[View-leave], \\[View-quit] and \\[View-kill-and-leave] depends on how view-mode was entered. If it was
+entered by view-file, view-file-other-window, view-file-other-frame, or
+\\[dired-view-file] \(\\[view-file], \\[view-file-other-window],
+\\[view-file-other-frame], or the Dired mode v command),
+then \\[View-quit] will try to kill the current buffer.
+If view-mode was entered from another buffer, by \\[view-buffer],
+\\[view-buffer-other-window], \\[view-buffer-other frame], \\[view-file],
+\\[view-file-other-window], or \\[view-file-other-frame],
+then \\[View-leave], \\[View-quit] and \\[View-kill-and-leave] will return to that buffer.
Entry to view-mode runs the normal hook `view-mode-hook'."
(interactive "P")
(if (> (prefix-numeric-value arg) 0) view-mode (not view-mode)))
(if view-mode (view-mode-disable)
(view-mode-enable))))
-
+\f
(defun view-mode-enable ()
"Turn on View mode."
;; Always leave view mode before changing major mode.
;; This is to guarantee that the buffer-read-only variable is restored.
- (make-local-hook 'change-major-mode-hook)
(add-hook 'change-major-mode-hook 'view-mode-disable nil t)
(setq view-mode t
- view-page-size (view-page-size-default view-page-size)
- view-half-page-size (or view-half-page-size (/ (view-window-size) 2))
+ view-page-size nil
+ view-half-page-size nil
view-old-buffer-read-only buffer-read-only
buffer-read-only t
view-old-Helper-return-blurb (and (boundp 'Helper-return-blurb)
(remove-hook 'change-major-mode-hook 'view-mode-disable t)
(and view-overlay (delete-overlay view-overlay))
(force-mode-line-update)
+ ;; Calling toggle-read-only while View mode is enabled
+ ;; sets view-read-only to t as a buffer-local variable
+ ;; after exiting View mode. That arranges that the next toggle-read-only
+ ;; will reenable View mode.
+ ;; Cancelling View mode in any other way should cancel that, too,
+ ;; so that View mode stays off if toggle-read-only is called.
+ (if (local-variable-p 'view-read-only)
+ (kill-local-variable 'view-read-only))
(setq view-mode nil
- Helper-return-blurb view-old-Helper-return-blurb
- buffer-read-only view-old-buffer-read-only))
+ Helper-return-blurb view-old-Helper-return-blurb)
+ (if buffer-read-only
+ (setq buffer-read-only view-old-buffer-read-only)))
;;;###autoload
(defun view-mode-enter (&optional return-to exit-action) "\
2) t Delete WINDOW or, if it is the only window, its frame.
3) (OLD-BUFF START POINT) Display buffer OLD-BUFF with displayed text
starting at START and point at POINT in WINDOW.
-4) quit-window Do quit-window in WINDOW.
+4) quit-window Do `quit-window' in WINDOW.
For list of all View commands, type H or h while viewing.
(unless view-mode ; Do nothing if already in view mode.
(view-mode-enable)
(force-mode-line-update)
- (message "%s"
- (substitute-command-keys "\
-Type \\[help-command] for help, \\[describe-mode] for commands, \\[View-quit] to quit."))))
-
+ (unless view-inhibit-help-message
+ (message "%s"
+ (substitute-command-keys "\
+View mode: type \\[help-command] for help, \\[describe-mode] for commands, \\[View-quit] to quit.")))))
+\f
(defun view-mode-exit (&optional return-to-alist exit-action all-win)
"Exit View mode in various ways, depending on optional arguments.
RETURN-TO-ALIST, EXIT-ACTION and ALL-WIN determine what to do after exit.
OLD-WINDOW is nil or a window to select after viewing.
OLD-BUF-INFO is information on what to do with WINDOW and is one of:
1) nil Do nothing.
-2) t Delete WINDOW or, if it is the only window, its frame.
+2) t Delete WINDOW and, if it is the only window, its frame.
3) (OLD-BUF START POINT) Display buffer OLD-BUF with displayed text
starting at START and point at POINT in WINDOW.
-4) quit-window Do quit-window in WINDOW.
+4) quit-window Do `quit-window' in WINDOW.
If one of the WINDOW in RETURN-TO-ALIST is the selected window and the
corresponding OLD-WINDOW is a live window, then select OLD-WINDOW."
(and return-to-alist (or all-win view-exits-all-viewing-windows)))
(if view-mode ; Only do something if in view mode.
(let* ((buffer (current-buffer))
- window
+ window notlost
(sel-old (assq (selected-window) return-to-alist))
(alist (cond
(all-win ; Try to restore all windows.
(or view-no-disable-on-exit
(view-mode-disable))
(while alist ; Restore windows with info.
+ (setq notlost nil)
(if (and (window-live-p (setq window (car (car alist))))
(eq buffer (window-buffer window)))
(let ((frame (window-frame window))
(set-window-start window (car (cdr old-buf-info)))
(set-window-point window (car (cdr (cdr old-buf-info)))))
((eq old-buf-info 'quit-window)
- (quit-window)) ; Not case 2, do nothing.
+ (quit-window)) ; Case 4.
((not (eq old-buf-info t)) nil) ; Not case 2, do nothing.
((not (one-window-p t)) (delete-window))
((not (eq frame (next-frame)))
;; Not the only frame, so can safely be removed.
(if view-remove-frame-by-deleting
(delete-frame frame)
+ (setq notlost t) ; Keep the window. See below.
(iconify-frame frame))))))
- ;; Altering view-return-to-alist causes trouble when
- ;; the user deiconifies the frame, then types q again.
- ;; If we leave view-return-to-alist unchanged, that
- ;; iconifies the frame again, as expected.
-;;; (setq view-return-to-alist (delete (car alist) view-return-to-alist))
+ ;; If a frame is removed by iconifying it, then the window is not
+ ;; really lost. In this case we keep the entry in
+ ;; view-return-to-alist so that if the user deiconifies the frame
+ ;; and then press q, then the frame is iconified again.
+ (unless notlost
+ (setq view-return-to-alist
+ (delete (car alist) view-return-to-alist)))
(setq alist (cdr alist)))
(if (window-live-p old-window) ; still existing window
(select-window old-window))
(setq view-exit-action nil)
(funcall exit-action buffer))
(force-mode-line-update))))
-
+\f
(defun View-exit ()
"Exit View mode but stay in current buffer."
(interactive)
"Quit View mode, kill current buffer and return to previous buffer."
(interactive)
(view-mode-exit view-return-to-alist (or view-exit-action 'kill-buffer) t))
-
+\f
;;; Some help routines.
(defun view-set-half-page-size-default (lines)
;; Get and maybe set half page size.
- (if (not lines) view-half-page-size
+ (if (not lines) (or view-half-page-size
+ (/ (view-window-size) 2))
(setq view-half-page-size
(if (zerop (setq lines (prefix-numeric-value lines)))
(/ (view-window-size) 2)
; (goto-char (point-max))
; (beginning-of-line))
; (view-recenter))
-
+
(defun View-goto-line (&optional line)
"Move to first (or prefix LINE) line in View mode.
Display is centered at LINE.
(goto-line line)
(view-recenter))
-(defun View-scroll-to-buffer-end ()
- "Scroll backward or forward so that buffer end is at last line of window."
+(defun View-back-to-mark (&optional ignore)
+ "Return to last mark set in View mode, else beginning of file.
+Display that line at the center of the window.
+This command pops the mark ring, so that successive
+invocations return to earlier marks."
(interactive)
- (let ((p (if (pos-visible-in-window-p (point-max)) (point))))
- (goto-char (point-max))
- (recenter -1)
- (and p (goto-char p))))
-
+ (goto-char (or (mark t) (point-min)))
+ (pop-mark)
+ (view-recenter))
+\f
(defun view-scroll-lines (lines backward default maxdefault)
;; This function does the job for all the scrolling commands.
;; Scroll forward LINES lines. If BACKWARD is true scroll backwards.
(if view-scroll-auto-exit "\\[View-scroll-page-forward]"
"\\[View-quit]")))
(message "End of buffer")))
+\f
+(defun View-scroll-to-buffer-end ()
+ "Scroll backward or forward so that buffer end is at last line of window."
+ (interactive)
+ (let ((p (if (pos-visible-in-window-p (point-max)) (point))))
+ (goto-char (point-max))
+ (recenter -1)
+ (and p (goto-char p))))
(defun View-scroll-page-forward (&optional lines)
"Scroll \"page size\" or prefix LINES lines forward in View mode.
\\[View-scroll-page-backward-set-page-size].
If LINES is more than a window-full, only the last window-full is shown."
(interactive "P")
- (view-scroll-lines lines nil view-page-size nil))
+ (view-scroll-lines lines nil (view-page-size-default view-page-size) nil))
-(defun View-scroll-page-backward (&optional lines)
+(defun View-scroll-page-backward (&optional lines)
"Scroll \"page size\" or prefix LINES lines backward in View mode.
See also `View-scroll-page-forward'."
(interactive "P")
- (view-scroll-lines lines t view-page-size nil))
-
+ (view-scroll-lines lines t (view-page-size-default view-page-size) nil))
+
(defun View-scroll-page-forward-set-page-size (&optional lines)
"Scroll forward LINES lines in View mode, setting the \"page size\".
This is the number of lines which \\[View-scroll-page-forward] and
(interactive "P")
(let ((view-scroll-auto-exit nil)
(view-try-extend-at-buffer-end t))
- (view-scroll-lines lines nil view-page-size nil)))
-
-(defun View-back-to-mark (&optional ignore)
- "Return to last mark set in View mode, else beginning of file.
-Display that line at the center of the window.
-This command pops the mark ring, so that successive
-invocations return to earlier marks."
- (interactive)
- (goto-char (or (mark t) (point-min)))
- (pop-mark)
- (view-recenter))
-
+ (view-scroll-lines lines nil (view-page-size-default view-page-size) nil)))
+\f
(defun View-search-regexp-forward (n regexp)
"Search forward for first (or prefix Nth) occurrence of REGEXP in View mode.
The variable `view-highlight-face' controls the face that is used
for highlighting the match that is found."
- (interactive "p\nsSearch forward (regexp): ")
+ (interactive "p\nsSearch forward (regexp): ")
(view-search n regexp))
(defun View-search-regexp-backward (n regexp)
times (if no "no " "") regexp)
(sit-for 4))))
+;; This is the dumb approach, looking at each line. The original
+;; version of this function looked like it might have been trying to
+;; do something clever, but not succeeding:
+;; http://lists.gnu.org/archive/html/bug-gnu-emacs/2007-09/msg00073.html
(defun view-search-no-match-lines (times regexp)
- ;; Search for the TIMESt occurrence of line with no match for REGEXP.
- (let ((back (and (< times 0) (setq times (- times)) -1))
- n)
- (while (> times 0)
- (save-excursion (beginning-of-line (if back (- times) (1+ times)))
- (setq n (point)))
- (setq times
- (cond
- ((< (count-lines (point) n) times) -1) ; Not enough lines.
- ((or (null (re-search-forward regexp nil t back))
- (if back (and (< (match-end 0) n)
- (> (count-lines (match-end 0) n) 1))
- (and (< n (match-beginning 0))
- (> (count-lines n (match-beginning 0)) 1))))
- 0) ; No match within lines.
- (back (count-lines (max n (match-beginning 0)) (match-end 0)))
- (t (count-lines (match-beginning 0) (min n (match-end 0))))))
- (goto-char n))
- (and (zerop times) (looking-at "^.*$"))))
-
+ "Search for the TIMESth occurrence of a line with no match for REGEXP.
+If such a line is found, return non-nil and set the match-data to that line.
+If TIMES is negative, search backwards."
+ (let ((step (if (>= times 0) 1
+ (setq times (- times))
+ -1)))
+ ;; Note that we do not check the current line.
+ (while (and (> times 0)
+ (zerop (forward-line step)))
+ ;; (forward-line 1) returns 0 on moving within the last line.
+ (if (eobp)
+ (setq times -1)
+ (or (re-search-forward regexp (line-end-position) t)
+ (setq times (1- times))))))
+ (and (zerop times)
+ (looking-at ".*")))
(provide 'view)
+;;; arch-tag: 6d0ace36-1d12-4de3-8de3-1fa3231636d7
;;; view.el ends here