@cindex environment variables in file names
@cindex expansion of environment variables
- @samp{$} in a file name is used to substitute environment variables.
-For example, if you have used the shell command @command{export
+@cindex @code{$} in file names
+ @anchor{File Names with $}@samp{$} in a file name is used to
+substitute an environment variable. The environment variable name
+consists of all the alphanumeric characters after the @samp{$};
+alternatively, it can be enclosed in braces after the @samp{$}. For
+example, if you have used the shell command @command{export
FOO=rms/hacks} to set up an environment variable named @env{FOO}, then
you can use @file{/u/$FOO/test.c} or @file{/u/$@{FOO@}/test.c} as an
-abbreviation for @file{/u/rms/hacks/test.c}. The environment variable
-name consists of all the alphanumeric characters after the @samp{$};
-alternatively, it may be enclosed in braces after the @samp{$}. Note
-that shell commands to set environment variables affect Emacs only if
-done before Emacs is started.
+abbreviation for @file{/u/rms/hacks/test.c}. If the environment
+variable is not defined, no substitution occurs: @file{/u/$notdefined}
+stands for itself (assuming the environment variable @env{notdefined}
+is not defined).
+
+ Note that shell commands to set environment variables affect Emacs
+only when done before Emacs is started.
@cindex home directory shorthand
You can use the @file{~/} in a file name to mean your home directory,
value of the environment variable @code{HOME}; see @ref{General
Variables}.)
- To access a file with @samp{$} in its name, type @samp{$$}. This pair
-is converted to a single @samp{$} at the same time as variable
-substitution is performed for a single @samp{$}. Alternatively, quote the
-whole file name with @samp{/:} (@pxref{Quoted File Names}). File names
-which begin with a literal @samp{~} should also be quoted with @samp{/:}.
+ To access a file with @samp{$} in its name, if the @samp{$} causes
+expansion, type @samp{$$}. This pair is converted to a single
+@samp{$} at the same time as variable substitution is performed for a
+single @samp{$}. Alternatively, quote the whole file name with
+@samp{/:} (@pxref{Quoted File Names}). File names which begin with a
+literal @samp{~} should also be quoted with @samp{/:}.
@findex substitute-in-file-name
The Lisp function that performs the substitution is called
@section Visiting Files
@cindex visiting files
-@c WideCommands
@table @kbd
@item C-x C-f
Visit a file (@code{find-file}).
@code{find-file-wildcards}.
If you visit a file that the operating system won't let you modify,
-Emacs makes the buffer read-only, so that you won't go ahead and make
-changes that you'll have trouble saving afterward. You can make the
-buffer writable with @kbd{C-x C-q} (@code{vc-toggle-read-only}).
-@xref{Misc Buffer}.
+or that is marked read-only, Emacs makes the buffer read-only too, so
+that you won't go ahead and make changes that you'll have trouble
+saving afterward. You can make the buffer writable with @kbd{C-x C-q}
+(@code{toggle-read-only}). @xref{Misc Buffer}.
@kindex C-x C-r
@findex find-file-read-only
- Occasionally you might want to visit a file as read-only in order to
-protect yourself from entering changes accidentally; do so by visiting
-the file with the command @kbd{C-x C-r} (@code{find-file-read-only}).
+ If you want to visit a file as read-only in order to protect
+yourself from entering changes accidentally, visit it with the command
+@kbd{C-x C-r} (@code{find-file-read-only}) instead of @kbd{C-x C-f}.
@kindex C-x C-v
@findex find-alternate-file
If you already have visited the same file in the usual (non-literal)
manner, this command asks you whether to visit it literally instead.
-@vindex find-file-hooks
-@vindex find-file-not-found-hooks
+@vindex find-file-hook
+@vindex find-file-not-found-functions
Two special hook variables allow extensions to modify the operation of
visiting files. Visiting a file that does not exist runs the functions
-in the list @code{find-file-not-found-hooks}; this variable holds a list
+in the list @code{find-file-not-found-functions}; this variable holds a list
of functions, and the functions are called one by one (with no
arguments) until one of them returns non-@code{nil}. This is not a
-normal hook, and the name ends in @samp{-hooks} rather than @samp{-hook}
+normal hook, and the name ends in @samp{-functions} rather than @samp{-hook}
to indicate that fact.
Successful visiting of any file, whether existing or not, calls the
-functions in the list @code{find-file-hooks}, with no arguments.
-This variable is really a normal hook, but it has an abnormal name for
-historical compatibility. In the case of a nonexistent file, the
-@code{find-file-not-found-hooks} are run first. @xref{Hooks}.
+functions in the list @code{find-file-hook}, with no arguments.
+This variable is a normal hook. In the case of a nonexistent file, the
+@code{find-file-not-found-functions} are run first. @xref{Hooks}.
There are several ways to specify automatically the major mode for
editing the file (@pxref{Choosing Modes}), and to specify local
that copying to or from one of them is sufficient to update the file
on all of them. Each shadow cluster has a name, and specifies the
network address of a primary host (the one we copy files to), and a
-regular expression that matches the hostnames of all the other hosts
+regular expression that matches the host names of all the other hosts
in the cluster. You can define a shadow cluster with @kbd{M-x
shadow-define-cluster}.
or like this:
@example
-Time-stamp: ""
+Time-stamp: " "
@end example
Then add the hook function @code{time-stamp} to the hook
-@code{write-file-hooks}; that hook function will automatically update
+@code{write-file-functions}; that hook function will automatically update
the time stamp, inserting the current date and time when you save the
file. You can also use the command @kbd{M-x time-stamp} to update the
time stamp manually. For other customizations, see the Custom group
@file{foo.c} is auto-saved in a file @file{#foo.c#}. Most buffers that
are not visiting files are auto-saved only if you request it explicitly;
when they are auto-saved, the auto-save file name is made by appending
-@samp{#%} to the front and @samp{#} to the rear of buffer name. For
+@samp{#} to the front and rear of buffer name, then
+adding digits and letters at the end for uniqueness. For
example, the @samp{*mail*} buffer in which you compose messages to be
-sent is auto-saved in a file named @file{#%*mail*#}. Auto-save file
+sent might auto-saved in a file named @file{#*mail*#704juu}. Auto-save file
names are made this way unless you reprogram parts of Emacs to do
something different (the functions @code{make-auto-save-file-name} and
@code{auto-save-file-name-p}). The file name to be used for auto-saving
in a buffer is calculated when auto-saving is turned on in that buffer.
+@cindex auto-save for remote files
+@vindex auto-save-file-name-transforms
+ The variable @code{auto-save-file-name-transforms} allows a degree
+of control over the auto-save file name. It lets you specify a series
+of regular expressions and replacements to transform the auto save
+file name. The default value puts the auto-save files for remote
+files (@pxref{Remote Files}) into the temporary file directory on the
+local machine.
+
When you delete a substantial part of the text in a large buffer, auto
save turns off temporarily in that buffer. This is because if you
deleted the text unintentionally, you might find the auto-save file more
Emacs does auto-saving periodically based on counting how many characters
you have typed since the last time auto-saving was done. The variable
@code{auto-save-interval} specifies how many characters there are between
-auto-saves. By default, it is 300.
+auto-saves. By default, it is 300. Emacs doesn't accept values that are
+too small: if you customize @code{auto-save-interval} to a value less
+than 20, Emacs will behave as if the value is 20.
@vindex auto-save-timeout
Auto-saving also takes place when you stop typing for a while. The
@vindex auto-save-list-file-prefix
Emacs records interrupted sessions for later recovery in files named
-@file{~/.emacs.d/auto-save-list/.saves-@var{pid}-@var{hostname}}. The
-@samp{~/.emacs.d/auto-save-list/.saves-} portion of these names comes
-from the value of @code{auto-save-list-file-prefix}. You can record
-sessions in a different place by customizing that variable. If you
-set @code{auto-save-list-file-prefix} to @code{nil} in your
-@file{.emacs} file, sessions are not recorded for recovery.
+@file{~/.emacs.d/auto-save-list/.saves-@var{pid}-@var{hostname}}. All
+of this name except @file{@var{pid}-@var{hostname}} comes from the
+value of @code{auto-save-list-file-prefix}. You can record sessions
+in a different place by customizing that variable. If you set
+@code{auto-save-list-file-prefix} to @code{nil} in your @file{.emacs}
+file, sessions are not recorded for recovery.
@node File Aliases
@section File Name Aliases
If you visit two names for the same file, normally Emacs makes
two different buffers, but it warns you about the situation.
-@vindex find-file-existing-other-name
+@vindex find-file-existing-other-name
+@vindex find-file-suppress-same-file-warnings
Normally, if you visit a file which Emacs is already visiting under
a different name, Emacs displays a message in the echo area and uses
the existing buffer visiting that file. This can happen on systems
that support symbolic links, or if you use a long file name on a
-system that truncates long file names. You can disable this feature
-by setting the variable @code{find-file-existing-other-name} to
-@code{nil}. Then if you visit the same file under two different names,
-you get a separate buffer for each file name.
+system that truncates long file names. You can suppress the message by
+setting the variable @code{find-file-suppress-same-file-warnings} to a
+non-@code{nil} value. You can disable this feature entirely by setting
+the variable @code{find-file-existing-other-name} to @code{nil}: then
+if you visit the same file under two different names, you get a separate
+buffer for each file name.
@vindex find-file-visit-truename
@cindex truenames of files
@dfn{Version control systems} are packages that can record multiple
versions of a source file, usually storing the unchanged parts of the
file just once. Version control systems also record history information
-such as the creation time of each version, who created it, and a
+such as the creation time of each version, who created it, and a
description of what was changed in that version.
The Emacs version control interface is called VC. Its commands work
@menu
* Introduction to VC:: How version control works in general.
-* VC Mode Line:: How the mode line shows version control status.
+* VC Mode Line:: How the mode line shows version control status.
* Basic VC Editing:: How to edit a file under version control.
* Old Versions:: Examining and comparing old versions.
* Secondary VC Commands:: The commands used a little less frequently.
@menu
* Version Systems:: Supported version control back-end systems.
* VC Concepts:: Words and concepts related to version control.
+* Types of Log File:: The per-file VC log in contrast to the ChangeLog.
@end menu
@node Version Systems
check-in time. However, CVS can also be set up to require locking.
(@pxref{CVS Options}).
+@node Types of Log File
+@subsubsection Types of Log File
+@cindex types of log file
+@cindex log File, types of
+@cindex version control log
+
+GNU projects under a revision control system generally possess
+@emph{two} types of log for changes. One is the per-file log
+maintained by the revision control system: each time you check in a
+change, you must fill out a @dfn{log entry} for the change (@pxref{Log
+Buffer}). This kind of log is called the @dfn{version control log},
+also the @dfn{revision control log}, @dfn{RCS log}, or @dfn{CVS log}.
+
+The other kind of log is the change log file, typically a file called
+@file{ChangeLog}. It provides a chronological record of all changes
+to a large portion of a program---one directory and its
+subdirectories. A small program would use one @file{ChangeLog} file;
+a large program may well merit a @file{ChangeLog} file in each major
+directory. @xref{Change Log}.
+
+When you use version control, you can use just the per-file log if you
+wish, or you can use both kinds of logs. When you use both, you
+typically want to write just one entry for each change. You can write
+the entry in @file{ChangeLog}, then copy it to the log buffer when you
+check in the change. Or you can write the entry in the log buffer
+while checking in the change, and later use the @kbd{C-x v a} command
+to copy it to @file{ChangeLog} (@pxref{Change Logs and VC}).
+
@node VC Mode Line
@subsection Version Control and the Mode Line
either locking or check-in, depending on the situation.
@table @kbd
-@item C-x C-q
@itemx C-x v v
Perform the next logical version control operation on this file.
@end table
@findex vc-next-action
-@findex vc-toggle-read-only
@kindex C-x v v
-@kindex C-x C-q @r{(Version Control)}
- Strictly speaking, the command for this job is @code{vc-next-action},
-bound to @kbd{C-x v v}. However, the normal meaning of @kbd{C-x C-q} is
-to make a read-only buffer writable, or vice versa; we have extended it
-to do the same job properly for files managed by version control, by
-performing the appropriate version control operations. When you type
-@kbd{C-x C-q} on a registered file, it acts like @kbd{C-x v v}.
-
The precise action of this command depends on the state of the file,
and whether the version control system uses locking or not. SCCS and
RCS normally use locking; CVS normally does not use locking.
+@findex vc-toggle-read-only
+@kindex C-x C-q @r{(Version Control)}
+ As a special convenience that is particularly useful for files with
+locking, you can let Emacs check a file in or out whenever you change
+its read-only flag. This means, for example, that you cannot
+accidentally edit a file without properly checking it out first. To
+achieve this, bind the key @kbd{C-x C-q} to @kbd{vc-toggle-read-only}
+in your @file{~/.emacs} file. (@xref{Init Rebinding}.)
+
@menu
* VC with Locking:: RCS in its default mode, SCCS, and optionally CVS.
* Without Locking:: Without locking: default mode for CVS.
-* Advanced C-x C-q:: Advanced features available with a prefix argument.
+* Advanced C-x v v:: Advanced features available with a prefix argument.
* Log Buffer:: Features available in log entry buffers.
@end menu
-
-@node VC with Locking
+
+@node VC with Locking
@subsubsection Basic Version Control with Locking
If locking is used for the file (as with SCCS, and RCS in its default
-mode), @kbd{C-x C-q} can either lock a file or check it in:
+mode), @kbd{C-x v v} can either lock a file or check it in:
@itemize @bullet
@item
-If the file is not locked, @kbd{C-x C-q} locks it, and
+If the file is not locked, @kbd{C-x v v} locks it, and
makes it writable so that you can change it.
@item
-If the file is locked by you, and contains changes, @kbd{C-x C-q} checks
+If the file is locked by you, and contains changes, @kbd{C-x v v} checks
in the changes. In order to do this, it first reads the log entry
for the new version. @xref{Log Buffer}.
@item
If the file is locked by you, but you have not changed it since you
-locked it, @kbd{C-x C-q} releases the lock and makes the file read-only
+locked it, @kbd{C-x v v} releases the lock and makes the file read-only
again.
@item
-If the file is locked by some other user, @kbd{C-x C-q} asks you whether
+If the file is locked by some other user, @kbd{C-x v v} asks you whether
you want to ``steal the lock'' from that user. If you say yes, the file
becomes locked by you, but a message is sent to the person who had
formerly locked the file, to inform him of what has happened.
unmodified; it flips to @samp{:} as soon as you save any changes in the
work file.
- Here is what @kbd{C-x C-q} does when using CVS:
+ Here is what @kbd{C-x v v} does when using CVS:
@itemize @bullet
@item
@item
If there are no new changes in the master file, but you have made
-modifications in your work file, @kbd{C-x C-q} checks in your changes.
+modifications in your work file, @kbd{C-x v v} checks in your changes.
In order to do this, it first reads the log entry for the new version.
@xref{Log Buffer}.
@item
-If the file is not modified, the @kbd{C-x C-q} does nothing.
+If the file is not modified, the @kbd{C-x v v} does nothing.
@end itemize
These rules also apply when you use RCS in the mode that does not
with RCS in a future Emacs version.
In addition, locking is possible with RCS even in this mode, although
-it is not required; @kbd{C-x C-q} with an unmodified file locks the
+it is not required; @kbd{C-x v v} with an unmodified file locks the
file, just as it does with RCS in its normal (locking) mode.
-@node Advanced C-x C-q
-@subsubsection Advanced Control in @kbd{C-x C-q}
+@node Advanced C-x v v
+@subsubsection Advanced Control in @kbd{C-x v v}
+@cindex version number to check in/out
When you give a prefix argument to @code{vc-next-action} (@kbd{C-u
-C-x C-q}), it still performs the next logical version control
+C-x v v}), it still performs the next logical version control
operation, but accepts additional arguments to specify precisely how
to do the operation.
version to select; this lets you start working from an older version,
or on another branch. If you do not enter any version, that takes you
to the highest version on the current branch; therefore @kbd{C-u C-x
-C-q @key{RET}} is a convenient way to get the latest version of a file from
+v v @key{RET}} is a convenient way to get the latest version of a file from
the repository.
@item
+@cindex specific version control system
Instead of the version number, you can also specify the name of a
version control system. This is useful when one file is being managed
with two version control systems at the same time (@pxref{Local
@node Log Buffer
@subsubsection Features of the Log Entry Buffer
- When you check in changes, @kbd{C-x C-q} first reads a log entry. It
+ When you check in changes, @kbd{C-x v v} first reads a log entry. It
pops up a buffer called @samp{*VC-Log*} for you to enter the log entry.
When you are finished, type @kbd{C-c C-c} in the @samp{*VC-Log*} buffer.
That is when check-in really happens.
@kindex C-x v g
For CVS-controlled files, you can display the result of the CVS
annotate command, using colors to enhance the visual appearance. Use
-the command @kbd{M-x vc-annotate} to do this. Red means new, blue
-means old, and intermediate colors indicate intermediate ages. By
-default, the time scale is 360 days, so that everything more than one
-year old is shown in blue. Giving a prefix argument @var{n} to this
-command multiplies the time scale by @var{n}, so that all text over
-@var{n} years old is shown in blue.
+the command @kbd{M-x vc-annotate} to do this. It creates a new buffer
+to display file's text, colored to show how old each part is. Text
+colored red is new, blue means old, and intermediate colors indicate
+intermediate ages. By default, the time scale is 360 days, so that
+everything more than one year old is shown in blue.
+
+ When you give a prefix argument to this command, it uses the
+minibuffer to read two arguments: which version number to display and
+annotate (instead of the current file contents), and a stretch factor
+for the time scale. A stretch factor of 0.1 means that the color
+range from red to blue spans the past 36 days instead of 360 days. A
+stretch factor greater than 1 means the color range spans more than a
+year.
@node Secondary VC Commands
@subsection The Secondary Commands of VC
* Registering:: Putting a file under version control.
* VC Status:: Viewing the VC status of files.
* VC Undo:: Cancelling changes before or after check-in.
-* VC Dired Mode:: Listing files managed by version control.
+* VC Dired Mode:: Listing files managed by version control.
* VC Dired Commands:: Commands to use in a VC Dired buffer.
@end menu
RCS as the ultimate default.
If locking is in use, @kbd{C-x v i} leaves the file unlocked and
-read-only. Type @kbd{C-x C-q} if you wish to start editing it. After
+read-only. Type @kbd{C-x v v} if you wish to start editing it. After
registering a file with CVS, you must subsequently commit the initial
-version by typing @kbd{C-x C-q}.
+version by typing @kbd{C-x v v}.
@vindex vc-default-init-version
+@cindex initial version number to register
The initial version number for a newly registered file is 1.1, by
default. You can specify a different default by setting the variable
@code{vc-default-init-version}, or you can give @kbd{C-x v i} a numeric
* Switching Branches:: How to get to another existing branch.
* Creating Branches:: How to start a new branch.
* Merging:: Transferring changes between branches.
-* Multi-User Branching:: Multiple users working at multiple branches
+* Multi-User Branching:: Multiple users working at multiple branches
in parallel.
@end menu
@node Switching Branches
@subsubsection Switching between Branches
- To switch between branches, type @kbd{C-u C-x C-q} and specify the
+ To switch between branches, type @kbd{C-u C-x v v} and specify the
version number you want to select. This version is then visited
@emph{unlocked} (write-protected), so you can examine it before locking
it. Switching branches in this way is allowed only when the file is not
To create a new branch from a head version (one that is the latest in
the branch that contains it), first select that version if necessary,
-lock it with @kbd{C-x C-q}, and make whatever changes you want. Then,
-when you check in the changes, use @kbd{C-u C-x C-q}. This lets you
+lock it with @kbd{C-x v v}, and make whatever changes you want. Then,
+when you check in the changes, use @kbd{C-u C-x v v}. This lets you
specify the version number for the new version. You should specify a
suitable branch number for a branch starting at the current version.
For example, if the current version is 2.5, the branch number should be
To create a new branch at an older version (one that is no longer the
head of a branch), first select that version (@pxref{Switching
-Branches}), then lock it with @kbd{C-x C-q}. You'll be asked to
+Branches}), then lock it with @kbd{C-x v v}. You'll be asked to
confirm, when you lock the old version, that you really mean to create a
new branch---if you say no, you'll be offered a chance to lock the
latest version instead.
- Then make your changes and type @kbd{C-x C-q} again to check in a new
+ Then make your changes and type @kbd{C-x v v} again to check in a new
version. This automatically creates a new branch starting from the
selected version. You need not specially request a new branch, because
that's the only way to add a new version at a point that is not the head
After the branch is created, you ``stay'' on it. That means that
subsequent check-ins create new versions on that branch. To leave the
branch, you must explicitly select a different version with @kbd{C-u C-x
-C-q}. To transfer changes from one branch to another, use the merge
+v v}. To transfer changes from one branch to another, use the merge
command, described in the next section.
@node Merging
As an example, suppose that you have finished a certain feature on
branch 1.3.1. In the meantime, development on the trunk has proceeded
to version 1.5. To merge the changes from the branch to the trunk,
-first go to the head version of the trunk, by typing @kbd{C-u C-x C-q
+first go to the head version of the trunk, by typing @kbd{C-u C-x v v
@key{RET}}. Version 1.5 is now current. If locking is used for the file,
-type @kbd{C-x C-q} to lock version 1.5 so that you can change it. Next,
+type @kbd{C-x v v} to lock version 1.5 so that you can change it. Next,
type @kbd{C-x v m 1.3.1 @key{RET}}. This takes the entire set of changes on
branch 1.3.1 (relative to version 1.3, where the branch started, up to
the last version on the branch) and merges it into the current version
If the files do not have version headers, you must instead tell Emacs
explicitly in each session which branch you are working on. To do this,
-first find the file, then type @kbd{C-u C-x C-q} and specify the correct
+first find the file, then type @kbd{C-u C-x v v} and specify the correct
branch number. This ensures that Emacs knows which branch it is using
during this particular editing session.
working area, then works by direct interactions with the CVS server.
One difficulty is that access to the CVS server is often slow, and
-that developers might need to work offline as well. VC is designed
+that developers might need to work off-line as well. VC is designed
to reduce the amount of network interaction necessary.
@menu
While using local RCS, you can pick up recent changes from the CVS
repository into your local file, or commit some of your changes back
to CVS, without terminating local RCS version control. To do this,
-switch to the CVS backend temporarily, with the @kbd{C-x v b} command:
+switch to the CVS back end temporarily, with the @kbd{C-x v b} command:
@table @kbd
@item C-x v b
@menu
* Change Logs and VC:: Generating a change log file from log entries.
-* Renaming and VC:: A command to rename both the source and master
+* Renaming and VC:: A command to rename both the source and master
file correctly.
* Version Headers:: Inserting version control headers into working files.
@end menu
@vindex vc-keep-workfiles
Normally the work file exists all the time, whether it is locked or
not. If you set @code{vc-keep-workfiles} to @code{nil}, then checking
-in a new version with @kbd{C-x C-q} deletes the work file; but any
+in a new version with @kbd{C-x v v} deletes the work file; but any
attempt to visit the file with Emacs creates it again. (With CVS, work
files are always kept.)
asks you each time whether to follow the link.
@vindex vc-suppress-confirm
- If @code{vc-suppress-confirm} is non-@code{nil}, then @kbd{C-x C-q}
+ If @code{vc-suppress-confirm} is non-@code{nil}, then @kbd{C-x v v}
and @kbd{C-x v i} can save the current buffer without asking, and
@kbd{C-x v u} also operates without asking for confirmation. (This
variable does not affect @kbd{C-x v c}; that operation is so drastic
users, but there is a mode called @dfn{non-strict locking} in which
you can check-in changes without locking the file first. Use
@samp{rcs -U} to switch to non-strict locking for a particular file,
-see the @code{rcs} manpage for details.
+see the @code{rcs} manual page for details.
When deducing the version control state of an RCS file, VC first
looks for an RCS version header string in the file (@pxref{Version
For one thing, you can set the @env{CVSREAD} environment variable
(the value you use makes no difference). If this variable is defined,
CVS makes your work files read-only by default. In Emacs, you must
-type @kbd{C-x C-q} to make the file writeable, so that editing works
+type @kbd{C-x v v} to make the file writable, so that editing works
in fact similar as if locking was used. Note however, that no actual
-locking is performed, so several users can make their files writeable
+locking is performed, so several users can make their files writable
at the same time. When setting @env{CVSREAD} for the first time, make
sure to check out all your modules anew, so that the file protections
are set correctly.
@cindex watching files (CVS)
Another way to achieve something similar to locking is to use the
@dfn{watch} feature of CVS. If a file is being watched, CVS makes it
-read-only by default, and you must also use @kbd{C-x C-q} in Emacs to
-make it writable. VC calls @code{cvs edit} to make the file writeable,
+read-only by default, and you must also use @kbd{C-x v v} in Emacs to
+make it writable. VC calls @code{cvs edit} to make the file writable,
and CVS takes care to notify other developers of the fact that you
intend to change the file. See the CVS documentation for details on
using the watch feature.
pick up any recent changes from the repository first, using @kbd{C-x v m
@key{RET}}, @pxref{Merging}).
+@vindex vc-cvs-global-switches
+ The variable @code{vc-cvs-global-switches} should be a string
+specifying switches to pass to CVS for all CVS operations.
+
When @code{vc-cvs-stay-local} is @code{t}, VC also makes local
version backups, so that simple diff and revert operations are
completely local (@pxref{Version Backups}).
repositories. It also does not make any version backups.
You can also set @code{vc-cvs-stay-local} to a regular expression
-that is matched against the repository hostname; VC then stays local
+that is matched against the repository host name; VC then stays local
only for repositories from hosts that match the pattern.
@node Directories
@vindex list-directory-brief-switches
@vindex list-directory-verbose-switches
- The text of a directory listing is obtained by running @code{ls} in an
-inferior process. Two Emacs variables control the switches passed to
-@code{ls}: @code{list-directory-brief-switches} is a string giving the
-switches to use in brief listings (@code{"-CF"} by default), and
-@code{list-directory-verbose-switches} is a string giving the switches to
-use in a verbose listing (@code{"-l"} by default).
+ The text of a directory listing is mostly obtained by running
+@code{ls} in an inferior process. Two Emacs variables control the
+switches passed to @code{ls}: @code{list-directory-brief-switches} is
+a string giving the switches to use in brief listings (@code{"-CF"} by
+default), and @code{list-directory-verbose-switches} is a string
+giving the switches to use in a verbose listing (@code{"-l"} by
+default).
+
+@vindex directory-free-space-program
+@vindex directory-free-space-args
+ Emacs adds information about the amount of free space on the disk
+that contains the directory. To do this, it runs the program
+specified by @code{directory-free-space-program} with arguments
+@code{directory-free-space-args}.
@node Comparing Files
@section Comparing Files
the programs @code{arc}, @code{jar}, @code{lzh}, @code{zip}, and
@code{zoo}, which have extensions corresponding to the program names.
- The keybindings of Archive mode are similar to those in Tar mode,
+ The key bindings of Archive mode are similar to those in Tar mode,
with the addition of the @kbd{m} key which marks a file for subsequent
operations, and @kbd{M-@key{DEL}} which unmarks all the marked files.
Also, the @kbd{a} key toggles the display of detailed file
@node Remote Files
@section Remote Files
+@cindex Tramp
@cindex FTP
@cindex remote file access
- You can refer to files on other machines using a special file name syntax:
+ You can refer to files on other machines using a special file name
+syntax:
@example
@group
/@var{host}:@var{filename}
/@var{user}@@@var{host}:@var{filename}
/@var{user}@@@var{host}#@var{port}:@var{filename}
+/@var{method}:@var{user}@@@var{host}:@var{filename}
+/@var{method}:@var{user}@@@var{host}#@var{port}:@var{filename}
@end group
@end example
@noindent
-When you do this, Emacs uses the FTP program to read and write files on
-the specified host. It logs in through FTP using your user name or the
-name @var{user}. It may ask you for a password from time to time; this
-is used for logging in on @var{host}. The form using @var{port} allows
-you to access servers running on a non-default TCP port.
+When you do this, Emacs may use the FTP program to access files on the
+remote host, or Emacs may use a remote-login program (such as
+@command{ssh}, @command{rlogin}, or @command{telnet}) to do this.
+
+You can always specify in the file name which method should be used to
+access the remote files, for example
+@file{/ftp:@var{user}@@@var{host}:@var{filename}} uses FTP, whereas
+@file{/ssh:@var{user}@@@var{host}:@var{filename}} uses @command{ssh}.
+When you don't specify a method in the file name, Emacs determines a
+default method according to the following rules:
+
+@enumerate
+@item
+If the host name starts with @samp{ftp.} (with dot), then Emacs assumes
+the @command{ftp} method.
+@item
+If the user name is @samp{ftp} or @samp{anonymous}, then Emacs assumes
+the @command{ftp} method.
+@item
+Otherwise, Emacs assumes the @command{ssh} method.
+@end enumerate
+
+@noindent
+Remote file access through FTP is handled by the Ange-FTP package, which
+is documented in the following. Remote file access through the other
+methods is handled by the Tramp package, which has its own manual.
+@xref{Top, The Tramp Manual,, tramp, The Tramp Manual}.
+
+When the Ange-FTP package is used, Emacs logs in through FTP using your
+user name or the name @var{user}. It may ask you for a password from
+time to time; this is used for logging in on @var{host}. The form using
+@var{port} allows you to access servers running on a non-default TCP
+port.
@cindex backups for remote files
@vindex ange-ftp-make-backup-files
If you want to disable backups for remote files, set the variable
@code{ange-ftp-make-backup-files} to @code{nil}.
+ By default, the auto-save files (@pxref{Auto Save Files}) for remote
+files are made in the temporary file directory on the local machine.
+This is achieved using the variable @code{auto-save-file-name-transforms}.
+
@cindex ange-ftp
@vindex ange-ftp-default-user
@cindex user name for remote file access
character for a user's home directory. For example, @file{/:/tmp/~hack}
refers to a file whose name is @file{~hack} in directory @file{/tmp}.
- Likewise, quoting with @samp{/:} is one way to enter in the minibuffer
-a file name that contains @samp{$}. However, the @samp{/:} must be at
-the beginning of the minibuffer in order to quote @samp{$}.
+ Quoting with @samp{/:} is also a way to enter in the minibuffer a
+file name that contains @samp{$}. In order for this to work, the
+@samp{/:} must be at the beginning of the minibuffer contents. (You
+can also double each @samp{$}; see @ref{File Names with $}.)
You can also quote wildcard characters with @samp{/:}, for visiting.
-For example, @file{/:/tmp/foo*bar} visits the file @file{/tmp/foo*bar}.
-However, in most cases you can simply type the wildcard characters for
-themselves. For example, if the only file name in @file{/tmp} that
-starts with @samp{foo} and ends with @samp{bar} is @file{foo*bar}, then
-specifying @file{/tmp/foo*bar} will visit just @file{/tmp/foo*bar}.
-Another way is to specify @file{/tmp/foo[*]bar}.
+For example, @file{/:/tmp/foo*bar} visits the file
+@file{/tmp/foo*bar}.
+
+ Another method of getting the same result is to enter
+@file{/tmp/foo[*]bar}, which is a wildcard specification that matches
+only @file{/tmp/foo*bar}. However, in many cases there is no need to
+quote the wildcard characters because even unquoted they give the
+right result. For example, if the only file name in @file{/tmp} that
+starts with @samp{foo} and ends with @samp{bar} is @file{foo*bar},
+then specifying @file{/tmp/foo*bar} will visit only
+@file{/tmp/foo*bar}.
@node File Name Cache
@section File Name Cache