@comment @setfilename viper.info
@setfilename ../info/viper
+@copying
+Copyright @copyright{} 1995, 1996, 1997, 2001, 2002, 2003, 2004,
+2005, 2006 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end quotation
+@end copying
+
@dircategory Emacs
@direntry
* VIPER: (viper). The newest Emacs VI-emulation mode.
or the VI PERil.)
@end direntry
-@iftex
@finalout
-@end iftex
@titlepage
@title Viper Is a Package for Emacs Rebels
@author Masahiko Sato (VIP 3.5)
@page
-@vskip 0pt plus 1fill
+@vskip 0pt plus 1filll
+@insertcopying
@end titlepage
-@unnumbered Distribution
-
-@noindent
-Copyright @copyright{} 1995, 1996, 1997, 2001, 2002 Free Software Foundation, Inc.
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
-
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
-
-@ifinfo
+@ifnottex
@node Top, Overview,, (DIR)
@unnumbered Viper
@code{kifer@@cs.stonybrook.edu} is the current address for Viper bug reports.
Please use the Ex command @kbd{:submitReport} for this purpose.@refill
-@end ifinfo
+@end ifnottex
@menu
* Overview:: Read for a smoother start
@dfn{buffer} that usually has the same name as the file. Buffers are also used
for other purposes, such as shell interfaces, directory editing, etc.
@xref{Dired,,Directory Editor,emacs,The
-Gnu Emacs Manual}, for an example.@refill
+GNU Emacs Manual}, for an example.@refill
A buffer has a distinguished position called the @dfn{point}.
A @dfn{point} is always between 2 characters, and is @dfn{looking at}
Viper defines @kbd{C-\} as its Meta key in Vi state. @xref{Vi State}, for
more info.@refill
-Emacs is structured as a lisp interpreter around a C core. Emacs keys
-cause lisp functions to be called. It is possible to call these
+Emacs is structured as a Lisp interpreter around a C core. Emacs keys
+cause Lisp functions to be called. It is possible to call these
functions directly, by typing @kbd{M-x function-name}.
@node Loading Viper, States in Viper, Emacs Preliminaries, Overview
sequences that begin with @kbd{C-x} and @kbd{C-c}.
There is also a key that lets you temporarily escape to Vi command state
-from Emacs or Insert states: typing @kbd{C-c \} will let you execute a
-single Vi command while staying in Viper's Emacs or Insert state.
-In Insert state, the same can also be achieved by typing @kbd{C-z}.
+from the Insert state: typing @kbd{C-z} will let you execute a
+single Vi command while staying in Viper's Insert state.
@node Vi State, Insert State, Emacs State, States in Viper
Viper uses Emacs Regular Expressions for searches. These are a superset of
Vi regular
expressions, excepting the change-of-case escapes @samp{\u}, @samp{\L},
-@dots{}, etc. @xref{Regular Expressions,,Regular Expressions,emacs,The
+@dots{}, etc. @xref{Regexps,,Syntax of Regular Expressions,emacs,The
GNU Emacs Manual}, for details.
Files specified to @kbd{:e} use @code{csh} regular expressions
(globbing, wildcards, what have you).
from the menubar. Viper customization group is located under the
@emph{Emulations} customization group, which in turn is under the
@emph{Editing} group (or simply by typing @kbd{:customize}). All Viper
-faces are grouped together under Viper's
+faces are grouped together under Viper's
@emph{Highlighting} group.
Try it: it is really simple!
hit @kbd{C-x} followed by @kbd{2}, then the current window will be split
into 2. Except for novice users, @kbd{C-c} is also set to execute an Emacs
command from the current major mode. @key{ESC} will do the same, if you
-configure @key{ESC} as Meta by setting @code{viper-no-multiple-ESC} to nil
+configure @key{ESC} as Meta by setting @code{viper-no-multiple-ESC} to @code{nil}
in @file{.viper}. @xref{Customization}. @kbd{C-\} in Insert, Replace, or Vi
states will make Emacs think @kbd{Meta} has been hit.@refill
@item \
placed in @file{~/.emacs} or some other customization file depending on the
version of Emacs that you use. Still, it is recommended to separate
Viper-related customization produced by the Emacs customization widget
-and keep in in the @file{.viper} file.
+and keep it in the @file{.viper} file.
Some advanced customization cannot be accomplished this way, however, and
has to be done in Emacs Lisp in the @file{.viper} file. For the common
Setting this variable too high may slow down your typing. Setting it too
low may make it hard to type macros quickly enough.
-@item viper-translate-all-ESC-keysequences t on tty, nil on windowing display
+@item viper-translate-all-ESC-keysequences @code{t} on tty, @code{nil} on windowing display
Normally, Viper lets Emacs translate only those ESC key sequences that are
defined in the low-level key-translation-map or function-key-map, such as those
emitted by the arrow and function keys. Other sequences, e.g., @kbd{\\e/}, are
treated as @kbd{ESC} command followed by a @kbd{/}. This is good for people
who type fast and tend to hit other characters right after they hit
-ESC. Other people like Emacs to translate @kbd{ESC} sequences all the time.
+ESC. Other people like Emacs to translate @kbd{ESC} sequences all the time.
The default is to translate all sequences only when using a dumb terminal.
This permits you to use @kbd{ESC} as a meta key in insert mode. For instance,
hitting @kbd{ESC x} fast would have the effect of typing @kbd{M-x}.
If your dumb terminal is not so dumb and understands the meta key, then you
-probably will be better off setting this variable to nil. Try and see which
+probably will be better off setting this variable to @code{nil}. Try and see which
way suits you best.
@item viper-ex-style-motion t
Set this to @code{nil}, if you want @kbd{l,h} to cross
at the beginning of a line in Insert state, @key{X} and @key{x} to delete
characters across lines in Vi command state, etc.
@item viper-ESC-moves-cursor-back t
-It t, cursor moves back 1 character when switching from insert state to vi
-state. If nil, the cursor stays where it was before the switch.
+It @code{t}, cursor moves back 1 character when switching from insert state to vi
+state. If @code{nil}, the cursor stays where it was before the switch.
@item viper-always t
@code{t} means: leave it to Viper to decide when a buffer must be brought
up in Vi state,
@vindex @code{viper-insert-state-cursor-color}
If set to a valid color, this will be the cursor color when Viper is in
insert state.
+@item viper-emacs-state-cursor-color nil
+@vindex @code{viper-emacs-state-cursor-color}
+If set to a valid color, this will be the cursor color when Viper is in
+emacs state.
@item viper-replace-region-end-delimiter "$"
A string used to mark the end of replacement regions. It is used only on
-TTYs or if @code{viper-use-replace-region-delimiters} is non-nil.
+TTYs or if @code{viper-use-replace-region-delimiters} is non-@code{nil}.
@item viper-replace-region-start-delimiter ""
A string used to mark the beginning of replacement regions. It is used
-only on TTYs or if @code{viper-use-replace-region-delimiters} is non-nil.
+only on TTYs or if @code{viper-use-replace-region-delimiters} is non-@code{nil}.
@item viper-use-replace-region-delimiters
-If non-nil, Viper will always use @code{viper-replace-region-end-delimiter} and
+If non-@code{nil}, Viper will always use @code{viper-replace-region-end-delimiter} and
@code{viper-replace-region-start-delimiter} to delimit replacement regions,
even on color displays (where this is unnecessary). By default, this
-variable is non-nil only on TTYs or monochrome displays.
+variable is non-@code{nil} only on TTYs or monochrome displays.
@item viper-allow-multiline-replace-regions t
-If non-nil, multi-line text replacement regions, such as those produced by
+If non-@code{nil}, multi-line text replacement regions, such as those produced by
commands @kbd{c55w}, @kbd{3C}, etc., will stay around until the user exits
the replacement mode. In this variable is set to @code{nil}, Viper will
emulate the standard Vi behavior, which supports only intra-line
@code{viper-insert-global-user-map}, and @code{viper-emacs-global-user-map}, as
explained below. Each of these key maps affects the corresponding Viper state.
The keymap @code{viper-insert-global-user-map} also affects Viper's Replace
-state.
+state.
@noindent
If you want to
@end example
@noindent
-Each Emacs command key calls some lisp function. If you have enabled the
+Each Emacs command key calls some Lisp function. If you have enabled the
Help, (@pxref{Rudimentary Changes}) @kbd{C-h k} will show you the function
for each specific key; @kbd{C-h b} will show all bindings, and @kbd{C-h m}
will provide information on the major mode in effect. If Help is not
@code{viper-want-emacs-keys-in-vi} and @code{viper-want-emacs-keys-in-insert} to
@code{nil}).
If @code{viper-always} is set to @code{t} (which is the default), Viper
-will try to bring each buffer
+will try to bring each buffer
in the Viper state that is most appropriate for that buffer.
Usually, this would be the Vi state, but sometimes it could be the Insert
state or the Emacs state.
bind common keys to specialized commands. This might make sense for modes
that bind only a small number of common keys. For instance, Viper subverts
the Shell mode by changing the bindings for @kbd{C-m} and @kbd{C-d} using
-@code{viper-add-local-keys} described in section on customization
+@code{viper-add-local-keys} described in the section on customization
(@pxref{Customization}).
In some cases, some @emph{minor} modes might override certain essential
@code{M-x viper-mode} will correct the situation. Viper knows about
several such minor modes and takes care of them, so the above trick
is usually not necessary. If you find that some minor mode, e.g.,
-@code{nasty-mode.el} interferes with Viper, putting the following in
+@code{nasty-mode} interferes with Viper, putting the following in
@file{.viper} should fix the problem:
@lisp
(viper-harness-minor-mode "nasty-mode")
It may not be always obvious which minor mode is at fault. The only
guidance here is to look into the file that defines the minor mode you are
-suspecting, say @code{nasty-mode.el}, and see if it has a variable called
+suspecting, say @file{nasty-mode.el}, and see if it has a variable called
@code{nasty-mode-map}. Then check if there is a statement of the form
@lisp
(define-key nasty-mode-map key function)
suspicion is wrong, no harm is done if you harness a minor mode that
doesn't need to be harnessed.
+It is recommended to harness even those minor modes that don't override
+Viper keys, but still have their own keymaps. A general way to
+make a minor mode, @code{my-mode},
+compatible with Viper is to have the file @file{my-mode.el} include the following code:
+
+@lisp
+(when (fboundp 'viper-harness-minor-mode)
+ (let ((lib (file-name-sans-extension
+ (file-name-nondirectory load-file-name))))
+ (viper-harness-minor-mode lib)))
+@end lisp
+
@vindex @code{viper-want-emacs-keys-in-vi}
@vindex @code{viper-want-emacs-keys-in-insert}
@vindex @code{viper-always}
@end example
@findex @code{viper-set-searchstyle-toggling-macros}
+If you don't like this feature as a default, but would still like to have
+it in some major modes, you can do so by first unsetting it globally, as
+shown above, and then setting it in the desired major modes as follows:
+@example
+(viper-set-searchstyle-toggling-macros nil 'c-mode)
+(viper-set-searchstyle-toggling-macros nil 'lisp-mode)
+@end example
+
@item Vi-isms in Emacs state
Some people find it useful to use the Vi-style search key, `/', to invoke
search in modes which Viper leaves in emacs-state. These modes are:
-@code{dired-mode}, @code{mh-folder-mode}, @code{gnus-group-mode},
-@code{gnus-summary-mode}, @code{Info-mode}, and @code{Buffer-menu-mode}
+@code{dired-mode}, @code{mh-folder-mode},
+@code{Info-mode}, and @code{Buffer-menu-mode}
(more may be added in the future). So, in the above modes, Viper binds `/'
so that it will behave Vi-style. Furthermore, in those major modes, Viper
binds `:' to invoke ex-style commands, like in vi-state. And, as described
To unbind the macros `//' and `///' for a major mode where you feel they
are undesirable, execute @code{viper-set-emacs-state-searchstyle-macros} with a
-non-nil argument. This can be done either interactively, by supplying a
+non-@code{nil} argument. This can be done either interactively, by supplying a
prefix argument, or by placing
@example
(viper-set-emacs-state-searchstyle-macros 'undefine)
Even though these commands are sometimes useful, they are no substitute for
the powerful @emph{tag table} facility of Emacs. Viper's @kbd{:tag} command
in a primitive interface to Emacs tags. @xref{Tags,Tags,Tags,emacs,
-The Gnu Emacs Manual}, for more information on tags.
+The GNU Emacs Manual}, for more information on tags.
The following two commands are normally bound to a mouse click and are part
of Viper. They work only if Emacs runs as an application under X
purpose of mouse search and mouse insert. By default, this is set to
@code{double-click-time} in Emacs and to
@code{mouse-track-multi-click-time} milliseconds in XEmacs.
-@end table
+@end table
@kindex @kbd{S-Mouse-1}
@kindex @kbd{S-Mouse-2}
@kindex @kbd{meta shift button1up}
specially, if this key sequence is bound to a macro.
Viper provides Vi-style keyboard macros through the usual Ex commands,
-@kbd{:map} and
+@kbd{:map} and
@kbd{:map!}. These macros are much more powerful in Viper than
they are in the original Vi and in other emulators. This is because Viper
implements an enhanced vi-style
macros) lets the user define keyboard macros that ask for confirmation or
even prompt the user for input and then continue. To do this, one should
type @kbd{C-x q} (for confirmation) or @kbd{C-u C-x q} (for prompt).
-For details, @pxref{Kbd Macro Query,,Customization,emacs,The GNU Emacs
+For details, @pxref{Keyboard Macro Query,,Customization,emacs,The GNU Emacs
Manual} @refill
When the user finishes defining a macro (which is done by typing @kbd{C-x)} ---
We also use @samp{word} for alphanumeric/non-alphanumeric words, and
@samp{WORD} for whitespace delimited words. @samp{char} refers to any
-ASCII character, @samp{CHAR} to non-whitespace character.
+@acronym{ASCII} character, @samp{CHAR} to non-whitespace character.
Brackets @samp{[]} indicate optional parameters; @samp{<count>} also
optional, usually defaulting to 1. Brackets are elided for
@samp{<count>} to eschew obfuscation.
Find the next bracket/parenthesis/brace and go to its match.
By default, Viper ignores brackets/parentheses/braces that occur inside
parentheses. You can change this by setting
-@code{viper-parse-sexp-ignore-comments} to nil in your @file{.viper} file.
+@code{viper-parse-sexp-ignore-comments} to @code{nil} in your @file{.viper} file.
This option can also be toggled interactively if you quickly hit @kbd{%%%}.
This latter feature is implemented as a vi-style keyboard macro. If you
@item :args
List files not shown anywhere with counts for next
@item :n [count] [+<cmd>] [<files>]
-Edit <count> file, or edit files. The count comes from @kbd{:args}.
-@item :N [count] [+<cmd>] [<files>]
+Edit <count> file, or edit files. The count comes from @kbd{:args}.
+@item :N [count] [+<cmd>] [<files>]
Like @kbd{:n}, but the meaning of the variable
@var{ex-cycle-other-window} is reversed.
@item :b
gvr@@halcyon.com (George V.@: Reilly),
hatazaki@@bach.convex.com (Takao Hatazaki),
hpz@@ibmhpz.aug.ipp-garching.mpg.de (Hans-Peter Zehrfeld),
+irie@@t.email.ne.jp (Irie Tetsuya),
jackr@@dblues.engr.sgi.com (Jack Repenning),
jamesm@@bga.com (D.J.@: Miller II),
jjm@@hplb.hpl.hp.com (Jean-Jacques Moreau),
kin@@isi.com (Kin Cho),
kwzh@@gnu.org (Karl Heuer),
lindstro@@biostat.wisc.edu (Mary Lindstrom),
+lektu@@terra.es (Juanma Barranquero),
+lennart.borgman.073@@student.lu.se (Lennart Borgman),
minakaji@@osaka.email.ne.jp (Mikio Nakajima),
Mark.Bordas@@East.Sun.COM (Mark Bordas),
meyering@@comco.com (Jim Meyering),
simonb@@prl.philips.co.uk (Simon Blanchard),
spadgett1@@nc.rr.com (Samuel Padgett),
stephen@@farrell.org (Stephen Farrell),
+storm@@cua.dk (Kim F. Storm),
sudish@@MindSpring.COM (Sudish Joseph),
schwab@@issan.informatik.uni-dortmund.de (Andreas Schwab)
terra@@diku.dk (Morten Welinder),
@setchapternewpage odd
@contents
@bye
+
+@ignore
+ arch-tag: f53e866a-15cf-4b1e-aead-77da9da1e864
+@end ignore