% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2016-05-28.16}
+\def\texinfoversion{2016-06-18.21}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
\ifx\pdfescapestring\thisisundefined
% No primitive available; should we give a warning or log?
% Many times it won't matter.
+ \xdef#1{#1}%
\else
% The expandable \pdfescapestring primitive escapes parentheses,
% backslashes, and other special chars.
% We have to set dummies so commands such as @code, and characters
% such as \, aren't expanded when present in a section title.
\indexnofonts
- \turnoffactive
\makevalueexpandable
+ \turnoffactive
+ % Use ASCII approximations in destination names.
+ \passthroughcharsfalse
\def\pdfdestname{#1}%
\txiescapepdf\pdfdestname
\safewhatsit{\pdfdest name{\pdfdestname} xyz}%
\fi
%
% Also escape PDF chars in the display string.
- \edef\pdfoutlinetext{#1}%
- \txiescapepdf\pdfoutlinetext
+ \bgroup
+ \ifx \declaredencoding \latone
+ % The PDF format can use an extended form of Latin-1 in bookmark
+ % strings. See Appendix D of the PDF Reference, Sixth Edition, for
+ % the "PDFDocEncoding".
+ \passthroughcharstrue
+ \fi
+ \ifx \declaredencoding \utfeight
+ % TODO: the PDF format can use UTF-16 in bookmark strings, but the
+ % code for this isn't done yet.
+ \fi
+ \globaldefs=1
+ \edef\pdfoutlinetext{#1}%
+ \txiescapepdf\pdfoutlinetext
+ \egroup
%
\pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
}
\global\advance\dimen@ by 1pt
\repeat
}%
- \multiply\dimen@ii by 4
- \divide\dimen@ii by 5
- \ifdim\ht3<\dimen@ii
- % Column heights are too different, so don't make their bottoms
- % flush with each other. The glue at the end of the second column
- % allows a second column to stretch, reducing the difference in
- % height between the two.
- \setbox0=\vbox to\dimen@{\unvbox1\vfill}%
- \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}%
+ \ifdim2\ht1>\vsize
+ % The left column has come out longer than the page itself. (Note
+ % that we have doubled \vsize for the double columns, so
+ % the actual height of the page is 0.5\vsize). Just split the last
+ % of the double column material roughly in half.
+ \setbox2=\box0
+ \setbox0 = \vsplit2 to \dimen@ii
+ \setbox0=\vbox to\dimen@ii{\unvbox0}%
+ \setbox2=\vbox to\dimen@ii{\unvbox2}%
\else
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
+ \multiply\dimen@ii by 5
+ \divide\dimen@ii by 4
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@ii
+ \global\setbox\balancedcolumns=\vbox{\pagesofar}%
+ \ifdim\ht3<\dimen@ii
+ % Column heights are too different, so don't make their bottoms
+ % flush with each other. The glue at the end of the second column
+ % allows a second column to stretch, reducing the difference in
+ % height between the two.
+ \setbox0=\vbox to\dimen@{\unvbox1\vfill}%
+ \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}%
+ \else
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ \fi
\fi
\fi
%
\countUTFx = "80
\countUTFy = "C2
\def\UTFviiiTmp{%
- \gdef~{
+ \gdef~{%
\ifpassthroughchars $\fi}}%
\UTFviiiLoop
\fi
}
+% These macros are used here to construct the name of a control
+% sequence to be defined.
+\def\UTFviiiTwoOctetsName#1#2{%
+ \csname u8:#1\string #2\endcsname}%
+\def\UTFviiiThreeOctetsName#1#2#3{%
+ \csname u8:#1\string #2\string #3\endcsname}%
+\def\UTFviiiFourOctetsName#1#2#3#4{%
+ \csname u8:#1\string #2\string #3\string #4\endcsname}%
+
% For UTF-8 byte sequence (TeX, e-TeX and pdfTeX)
% Definition macro to replace the Unicode character
% Definition macro that is used by @U command
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
+
+ % Give \u8:... its definition. The sequence of seven \expandafter's
+ % expands after the \gdef three times, e.g.
+ %
+ % 1. \UTFviiTwoOctetsName B1 B2
+ % 2. \csname u8:B1 \string B2 \endcsname
+ % 3. \u8: B1 B2 (a single control sequence token)
%
- % Access definitions of characters given UTF-8 sequences
- \def\UTFviiiTwoOctets##1##2{%
- \csname u8:##1\string ##2\endcsname}%
- \def\UTFviiiThreeOctets##1##2##3{%
- \csname u8:##1\string ##2\string ##3\endcsname}%
- \def\UTFviiiFourOctets##1##2##3##4{%
- \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
- \expandafter\expandafter\expandafter\expandafter
- \expandafter\expandafter\expandafter
- \gdef\UTFviiiTmp{#2}%
+ \expandafter\expandafter
+ \expandafter\expandafter
+ \expandafter\expandafter
+ \expandafter\gdef \UTFviiiTmp{#2}%
%
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp
\endgroup}
%
- % Given the value in \countUTFz as a Unicode code point, set \UTFviiiTmp.
+ % Given the value in \countUTFz as a Unicode code point, set \UTFviiiTmp
+ % to the corresponding UTF-8 sequence.
\gdef\parseXMLCharref{%
\ifnum\countUTFz < "A0\relax
\errhelp = \EMsimple
\errmessage{Cannot define Unicode char value < 00A0}%
\else\ifnum\countUTFz < "800\relax
\parseUTFviiiA,%
- \parseUTFviiiB C\UTFviiiTwoOctets.,%
+ \parseUTFviiiB C\UTFviiiTwoOctetsName.,%
\else\ifnum\countUTFz < "10000\relax
\parseUTFviiiA;%
\parseUTFviiiA,%
- \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+ \parseUTFviiiB E\UTFviiiThreeOctetsName.{,;}%
\else
\parseUTFviiiA;%
\parseUTFviiiA,%
\parseUTFviiiA!%
- \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+ \parseUTFviiiB F\UTFviiiFourOctetsName.{!,;}%
\fi\fi\fi
}
+ % Extract a byte from the end of the UTF-8 representation of \countUTFx.
+ % It must be a non-initial byte in the sequence.
+ % Change \uccode of #1 for it to be used in \parseUTFviiiB as one
+ % of the bytes.
\gdef\parseUTFviiiA#1{%
\countUTFx = \countUTFz
\divide\countUTFz by 64
- \countUTFy = \countUTFz
+ \countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
+
+ % \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
+ % in order to get the last five bits.
\advance\countUTFx by -\countUTFz
+
+ % Convert this to the byte in the UTF-8 sequence.
\advance\countUTFx by 128
\uccode `#1\countUTFx
\countUTFz = \countUTFy}
- % Used to set \UTFviiiTmp to a UTF-8 byte sequence
+ % Used to put a UTF-8 byte sequence into \UTFviiiTmp
+ % #1 is the increment for \countUTFz to yield a the first byte of the UTF-8
+ % sequence.
+ % #2 is one of the \UTFviii*OctetsName macros.
+ % #3 is always a full stop (.)
+ % #4 is a template for the other bytes in the sequence. The values for these
+ % bytes is substituted in here with \uppercase using the \uccode's.
\gdef\parseUTFviiiB#1#2#3#4{%
\advance\countUTFz by "#10\relax
\uccode `#3\countUTFz