@c %**end of header
@c Version of the software and manual.
-@set VERSION 7.93
+@set VERSION 8.0.1
@c Edition of the manual. It is either empty for the first edition or
@c has the form ", nth Edition" (without the quotes).
-@set EDITION , 5th Edition
-@set UPDATED 2006-03-19
-@set UPDATE-MONTH March, 2006
+@set EDITION
+@set UPDATED 2006-06-20
+@set UPDATE-MONTH June, 2006
@c Other variables.
-@set MH-BOOK-HOME http://www.ics.uci.edu/~mh/book/mh
+@set MH-BOOK-HOME http://rand-mh.sourceforge.net/book/mh
@set MH-E-HOME http://mh-e.sourceforge.net/
@c Copyright
This is version @value{VERSION}@value{EDITION} of @cite{The MH-E
Manual}, last updated @value{UPDATED}.
-Copyright @copyright{} 1995,
- 2001, 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+Copyright @copyright{} 1995, 2001, 2002, 2003, 2005, 2006 Free
+Software Foundation, Inc.
@quotation
The MH-E manual is free documentation; you can redistribute it and/or
@value{VERSION} of MH-E will appear in GNU Emacs 22.1. It is supported
in GNU Emacs 21, as well as XEmacs 21 (except for versions
21.5.9-21.5.16). It is compatible with MH versions 6.8.4 and higher,
-all versions of nmh, and GNU mailutils 0.4 and higher.}, so you
+all versions of nmh, and GNU mailutils 1.0 and higher.}, so you
shouldn't have to do anything special to use it. This manual covers
MH-E version @value{VERSION}. To help you decide which version you
have, see @ref{Getting Started}.
the individual MH commands. When the name is not obvious, I'll guide
you to a relevant MH manual page that describes the action more fully.
+@cindex @cite{MH & nmh: Email for Users & Programmers}
+@cindex MH book
@cindex info
@kindex C-h i
installing MH-E.
If the @code{mh-version} command displays @samp{No MH variant
-detected}, then you need to install MH or tell MH-E where to find
-MH@footnote{In very old versions of MH-E, you may get the error
+detected}@footnote{In very old versions of MH-E, you may get the error
message, @samp{Cannot find the commands `inc' and `mhl' and the file
`components'} if MH-E can't find MH. In this case, you need to update
MH-E, and you may need to install MH too. However, newer versions of
-MH-E are better at finding MH if it is on your system.}.
+MH-E are better at finding MH if it is on your system.}, then you need
+to install MH or tell MH-E where to find MH.
+
+@cindex Debian
+@cindex nmh
+@cindex GNU mailutils
+
+If you don't have MH on your system already, you must install a
+variant of MH. The Debian mh-e package does this for you automatically
+(@pxref{Getting MH-E}). Most people use
+@uref{http://www.nongnu.org/nmh/, nmh}, but you may be interested in
+trying out @uref{http://www.gnu.org/software/mailutils/, GNU
+mailutils}, which supports IMAP. Your GNU/Linux distribution probably
+has packages for both of these.
+
+@cindex @command{install-mh}
+@cindex MH commands, @command{install-mh}
+@cindex MH book
+
+If you've never run MH before, you need to run @command{install-mh}
+from the shell before you continue. This sets up your personal MH
+environment@footnote{See the section
+@uref{@value{MH-BOOK-HOME}/../overall/setup.html, Setting Up MH} in the
+MH book.}. If you don't, you'll be greeted with the error message:
+@samp{Install MH and run install-mh before running MH-E}. This is all
+you need to know about MH to use MH-E, but the more you know about MH,
+the more you can leverage its power. See the
+@uref{@value{MH-BOOK-HOME}/../, MH book} to learn more about MH.
+
+@cindex @samp{Path:} MH profile component
+@cindex MH profile
+@cindex MH profile component
+@cindex MH profile component, @samp{Path:}
+
+Your MH environment includes your @dfn{MH profile} which is found in
+the file @file{~/.mh_profile}. This file contains a number of @dfn{MH
+profile components}. For example, the @samp{Path:} MH profile
+component contains the path to your mail directory, which is
+@file{~/Mail} by default.
@cindex @command{mhparam}
@cindex MH commands, @command{mhparam}
@vindex mh-variant
@vindex mh-variant-in-use
-The option @code{mh-variant} specifies the variant used by MH-E
-(@pxref{Options}). The default setting of this option is
+There are several options MH-E uses to interact with your MH
+installation. The option @code{mh-variant} specifies the variant used
+by MH-E (@pxref{Options}). The default setting of this option is
@samp{Auto-detect} which means that MH-E will automatically choose the
first of nmh, MH, or GNU mailutils that it finds in the directories
listed in @code{mh-path} (which you can customize),
@end quotation
@sp 1
-@cindex @command{install-mh}
-@cindex MH commands, @command{install-mh}
-
-If you've never run MH before, you need to run @command{install-mh}
-from the shell before you continue. This sets up your personal MH
-environment@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/setup.htm, Setting Up MH} in the MH book.}.
-If you don't, you'll be greeted with the error message: @samp{Install
-MH and run install-mh before running MH-E}.
-
-@cindex @samp{Path:} MH profile component
-@cindex MH profile
-@cindex MH profile component
-@cindex MH profile component, @samp{Path:}
-
-Your MH environment includes your @dfn{MH profile} which is found in
-the file @file{~/.mh_profile}. This file contains a number of @dfn{MH
-profile components}. For example, the @samp{Path:} MH profile
-component contains the path to your mail directory, which is
-@file{~/Mail} by default.
-
@cindex MH profile component, @samp{Draft-Folder:}
@cindex MH profile component, @samp{Path:}
@cindex MH profile component, @samp{Previous-Sequence:}
To read the mail you've just sent yourself, enter @kbd{M-x mh-rmail}.
This incorporates the new mail and puts the output from
@command{inc}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/reapre.htm, Reading Mail: inc show next
+@uref{@value{MH-BOOK-HOME}/reapre.html, Reading Mail: inc show next
prev} in the MH book.} (called @dfn{scan lines} after the MH program
@command{scan}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/faswsprs.htm, Find and Specify with scan
+@uref{@value{MH-BOOK-HOME}/faswsprs.html, Find and Specify with scan
pick Ranges Sequences} in the MH book.} which prints a one-line
summary of each message) into a buffer called @samp{+inbox} whose
major mode is MH-Folder.
running @kbd{C-h C-h}. This brings up a list of available help topics,
one of which displays the documentation for a given key (like @kbd{C-h
k C-n}). Another useful help feature is to view the manual section
-that describes a given key (such as @kbd{C-h C-k i}). In addition,
+that describes a given key (such as @kbd{C-h K i}). In addition,
review @ref{Conventions}, if any of the GNU Emacs conventions are
strange to you.
please do not prefix your symbols (variables and functions) with
@samp{mh-}. This prefix is reserved for the MH-E package. To avoid
conflicts with existing MH-E symbols, use a prefix like @samp{my-} or
-your initials.
+your initials. (Unless, of course, your initials happen to be @emph{mh}!)
@menu
* Options::
range must be nonempty.
@c -------------------------
@item <num>:N
-@item <num>:+N
+@itemx <num>:+N
@itemx <num>:-N
Up to N messages beginning with (or ending with) message num. Num may
be any of the predefined symbols: first, prev, cur, next or last.
@code{mh-progs} directory (@pxref{Getting Started}). You may also link
a file to @command{inc} that uses a different format (see
@samp{mh-profile}(5), and sections
-@uref{@value{MH-BOOK-HOME}/reapre.htm, Reading Mail: inc show next
-prev} and @uref{@value{MH-BOOK-HOME}/mhstr.htm, MH Format Strings} in
+@uref{@value{MH-BOOK-HOME}/reapre.html, Reading Mail: inc show next
+prev} and @uref{@value{MH-BOOK-HOME}/mhstr.html, MH Format Strings} in
the MH book). You'll then need to modify several variables
appropriately (@pxref{Scan Line Formats}).
@command{mhl} from the shell. If you have a format file that you want
MH-E to use, you can set this option to @samp{Specify an mhl Format
File} and enter the name of your format file (@command{mhl}(1) or
-section @uref{@value{MH-BOOK-HOME}/shomes.htm#Usisho, Using mhl} in
+section @uref{@value{MH-BOOK-HOME}/shomes.html#Usisho, Using mhl} in
the MH book tells you how to write one). Your format file should
specify a non-zero value for @samp{overflowoffset} to allow MH-E to
parse the header. Note that @command{mhl} is always used for printing
Mail Extensions) messages which are simply messages with additional
@dfn{body parts} or @dfn{attachments}. You can use the MH commands
@command{show}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/reapre.htm, Reading Mail: inc show next
+@uref{@value{MH-BOOK-HOME}/reapre.html, Reading Mail: inc show next
prev} in the MH book.} or @command{mhshow}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/usimim.htm#ReMIMa, Reading MIME Mail} in
+@uref{@value{MH-BOOK-HOME}/usimim.html#ReMIMa, Reading MIME Mail} in
the MH book.} from the shell to read @sc{mime} messages@footnote{You
can call them directly from Emacs if you're running the X Window
System: type @kbd{M-! xterm -e mhshow @var{message-number}}. You can
Another handy command is @kbd{D b} (@code{mh-burst-digest}). This
command uses the MH command @command{burst}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/burdig.htm, Bursting Messages} in the MH
+@uref{@value{MH-BOOK-HOME}/burdig.html, Bursting Messages} in the MH
book.} to break out each message in the digest into its own message.
Using this command, you can quickly delete unwanted messages, like
this: Once the digest is split up, toggle out of MH-Folder Show mode
@kbd{P l} (@code{mh-print-msg}) (the @i{l} is for @i{l}ine printer or
@i{l}pr). You can print all the messages in a range. The message is
formatted with @command{mhl}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/shomes.htm#Usisho, Using mhl} in the MH
+@uref{@value{MH-BOOK-HOME}/shomes.html#Usisho, Using mhl} in the MH
book.} and printed with the @command{lpr} command.
@kindex P f
MH-E has analogies for each of the MH @command{folder} and
@command{refile} commands@footnote{See the sections
-@uref{@value{MH-BOOK-HOME}/fol.htm#Youfol, Your Current Folder:
-folder} and @uref{@value{MH-BOOK-HOME}/fol.htm#Movref, Moving and
+@uref{@value{MH-BOOK-HOME}/fol.html#Youfol, Your Current Folder:
+folder} and @uref{@value{MH-BOOK-HOME}/fol.html#Movref, Moving and
Linking Messages: refile} in the MH book.}. To refile a message in
another folder, use the command @kbd{o} (@code{mh-refile-msg})
(mnemonic: ``output''). You are prompted for the folder name
(@code{mh-execute-commands}). Many MH-E commands that may affect the
numbering of the messages (such as @kbd{F r} or @kbd{F p}) will ask if
you want to process refiles or deletes first and then either run
-@kbd{x} for you or undo the pending refiles and deletes, which are
-lost.
+@kbd{x} for you or undo the pending refiles and deletes.
@kindex x
@vindex mh-after-commands-processed-hook
@kindex t
@vindex mh-recenter-summary-flag
-When you use @kbd{t} to toggle between show mode and scan mode, the
-MH-Show buffer is hidden and the MH-Folder buffer is left alone.
-Setting @code{mh-recenter-summary-flag} to a non-@code{nil} value
-causes the toggle to display as many scan lines as possible, with the
-cursor at the middle. The effect of @code{mh-recenter-summary-flag} is
-rather useful, but it can be annoying on a slow network connection.
+When you use @kbd{t} to toggle from MH-Folder Show mode to MH-Folder
+mode, the MH-Show buffer is hidden and the MH-Folder buffer is left
+alone. Setting @code{mh-recenter-summary-flag} to a non-@code{nil}
+value causes the toggle to display as many scan lines as possible,
+with the cursor at the middle. The effect of
+@code{mh-recenter-summary-flag} is rather useful, but it can be
+annoying on a slow network connection.
@findex mh-visit-folder
@kindex F v
using @kbd{F s} (@code{mh-search}). @xref{Searching}.
@cindex @command{procmail}
-@cindex @command{rcvstore}
-@cindex MH commands, @command{rcvstore}
@cindex @samp{unseen} sequence
@cindex sequence, @samp{unseen}
@cindex Unix commands, @command{procmail}
@kindex F n
@vindex mh-new-messages-folders
-If you use a program such as @command{procmail} to use
-@command{rcvstore} to file your incoming mail automatically, you can
-display new, unseen, messages using the command @kbd{F n}
-(@code{mh-index-new-messages}). All messages in the @samp{unseen}
-sequence from the folders in @code{mh-new-messages-folders} are
-listed. However, this list of folders can be overridden with a prefix
-argument: with a prefix argument, enter a space-separated list of
-folders, or nothing to search all folders.
+If you use a program such as @command{procmail} to file your incoming
+mail automatically, you can display new, unseen, messages using the
+command @kbd{F n} (@code{mh-index-new-messages}). All messages in the
+@samp{unseen} sequence from the folders in
+@code{mh-new-messages-folders} are listed. However, this list of
+folders can be overridden with a prefix argument: with a prefix
+argument, enter a space-separated list of folders, or nothing to
+search all folders.
@cindex @samp{tick} sequence
@cindex sequence, @samp{tick}
The option @code{mh-sortm-args} holds extra arguments to pass on to
the command @command{sortm}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/sorsor.htm, Sorting Messages: sortm} in the
+@uref{@value{MH-BOOK-HOME}/sorsor.html, Sorting Messages: sortm} in the
MH book.} when a prefix argument is used with @kbd{F S}. Normally
default arguments to @command{sortm} are specified in the MH profile.
This option may be used to provide an alternate view. For example,
@findex mh-execute-commands
@kindex q
@vindex mh-before-quit-hook
+@vindex mh-before-quit-hook, example
@vindex mh-quit-hook
+@vindex mh-quit-hook, example
The two hooks @code{mh-before-quit-hook} and @code{mh-quit-hook} are
called by @kbd{q}. The former one is called before the quit occurs, so
you might use it to perform any MH-E operations; you could perform
some query and abort the quit or call @code{mh-execute-commands}, for
example. The latter is not run in an MH-E context, so you might use it
-to modify the window setup. For example, if the window configuration
-was saved as in the example in @ref{Miscellaneous Commands and
-Options}, you would also want to set @code{mh-quit-hook} to the
-following:
-
-@c XXX Replace this with my example for killing the mail buffers.
-
-@vindex mh-quit-hook, example
+to modify the window setup. If you find that @kbd{q} buries a lot of
+buffers that you would rather remove, you can use both
+@code{mh-before-quit-hook} and @code{mh-quit-hook} to accomplish that.
@smalllisp
@group
+(defvar my-mh-folder-buffer-to-delete nil
+ "Folder buffer that is being quit.")
+
+(defun my-mh-before-quit-hook ()
+ "Save folder buffer that is to be deleted."
+ (setq my-mh-folder-buffer-to-delete (current-buffer)))
+
(defun my-mh-quit-hook ()
- "Clear window configuration variables as the MH window is gone."
- (setq my-mh-screen-saved nil)
- (setq my-mh-screen nil)
- (if my-normal-screen
- (set-window-configuration my-normal-screen))
- (setq my-normal-screen nil))
-
-@i{Clean up window setup in mh-quit-hook}
+ "Kill folder buffer rather than just bury it."
+ (set-buffer my-mh-folder-buffer-to-delete)
+ (if (get-buffer mh-show-buffer)
+ (kill-buffer mh-show-buffer))
+ (kill-buffer (current-buffer)))
+
+@i{Kill MH-Folder buffer instead of burying it}
@end group
@end smalllisp
@quotation
@multitable @columnfractions .20 .80
-@headitem Response @tab Reply Goes To
+@c @headitem Response @tab Reply Goes To
+@c XXX @headitem not yet supported by SourceForge's texi2pdf.
+@item @b{Response} @tab @b{Reply Goes To}
+@c -------------------------
@item @kbd{from}
@tab
The person who sent the message. This is the default, so @key{RET} is
sufficient.
-
+@c -------------------------
@item @kbd{to}
@tab
Replies to the sender, plus all recipients in the @samp{To:} header field.
-
-@item @kbd{all}
-@itemx @kbd{cc}
+@c -------------------------
+@item @kbd{cc}@*@kbd{all}
@tab
Forms a reply to the addresses in the @samp{Mail-Followup-To:} header
field if one exists; otherwise forms a reply to the sender, plus all
@vindex mh-reply-default-reply-to
Depending on your answer, @command{repl}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/reprep.htm, Replying to Messages: repl} in
+@uref{@value{MH-BOOK-HOME}/reprep.html, Replying to Messages: repl} in
the MH book.} is given a different argument to form your reply.
Specifically, a choice of @kbd{from} or none at all runs @samp{repl
-nocc all}, and a choice of @kbd{to} runs @samp{repl -cc to}. Finally,
are replying to is inserted in your reply after having first been run
through @command{mhl} with the format file @file{mhl.reply}. See
@command{mhl}(1) or the section
-@uref{@value{MH-BOOK-HOME}/shomes.htm#Usisho, Using mhl} in the MH
+@uref{@value{MH-BOOK-HOME}/shomes.html#Usisho, Using mhl} in the MH
book to see how you can modify the default @file{mhl.reply} file.
@vindex mh-yank-behavior
are prompted for the @samp{To:} and @samp{cc:} recipients. You are
given a draft to edit that looks like it would if you had run the MH
command @command{forw}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/forfor.htm, Forwarding Messages: forw} in
+@uref{@value{MH-BOOK-HOME}/forfor.html, Forwarding Messages: forw} in
the MH book.}. You can then add some text (@pxref{Editing Drafts}).
You can forward several messages by using a range (@pxref{Ranges}).
All of the messages in the range are inserted into your draft. The
The option @code{mh-redist-full-contents-flag} must be turned on if
@command{dist}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/disdis.htm, Distributing Messages with
+@uref{@value{MH-BOOK-HOME}/disdis.html, Distributing Messages with
dist} in the MH book.} requires the whole letter for redistribution,
which is the case if @command{send}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/sensen.htm, Sending Some Mail: comp send}
+@uref{@value{MH-BOOK-HOME}/sensen.html, Sending Some Mail: comp send}
in the MH book.} is compiled with the @sc{berk} option (which many
people abhor). If you find that MH will not allow you to redistribute
a message that has been redistributed before, turn off this option.
to insert the directives so you don't need to remember the syntax of
them. Remember: you can always add MH-style directives by
hand@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/usimim.htm#SeMIMa, Sending MIME Mail} in
+@uref{@value{MH-BOOK-HOME}/usimim.html#SeMIMa, Sending MIME Mail} in
the MH book.}.
@cindex MIME Meta Language (MML)
(@code{mh-mh-to-mime}) instead of @kbd{C-c C-m C-m}. This runs the
command @command{mhbuild} (@command{mhn}) on the message which expands
the tags@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/usimim.htm#SeMIMa, Sending MIME Mail} in
+@uref{@value{MH-BOOK-HOME}/usimim.html#SeMIMa, Sending MIME Mail} in
the MH book.}. This action can be undone by running @kbd{C-c C-m C-u}
(@code{mh-mh-to-mime-undo}), which works by reverting to a backup
file. You are prompted to confirm this action, but you can avoid the
you can check the actual address(es) in the alias. A new buffer named
@samp{*MH-E Recipients*} is created with the output of @command{whom}
(@pxref{Miscellaneous})@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/senove.htm#WhaPro, What now? -- and the
+@uref{@value{MH-BOOK-HOME}/senove.html#WhaPro, What now? -- and the
whatnow Program} in the MH book.}.
@node Sending Message, Killing Draft, Checking Recipients, Editing Drafts
@vindex mh-send-prog
In case the MH @command{send} program@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/sensen.htm, Sending Some Mail: comp send}
+@uref{@value{MH-BOOK-HOME}/sensen.html, Sending Some Mail: comp send}
in the MH book.} is installed under a different name, use
@code{mh-send-prog} to tell MH-E the name.
MH-E loads aliases for completion and folder name hints from various
places. It uses the MH command @command{ali}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/mh.htm, MH Aliases} in the MH book.} to
+@uref{@value{MH-BOOK-HOME}/mh.html, MH Aliases} in the MH book.} to
read aliases from the files listed in the profile component
@samp{Aliasfile:} as well as system-wide aliases (for example,
@file{/etc/nmh/MailAliases}).
@cindex customization group, @samp{mh-speedbar}
The MH-E speedbar uses the MH command @command{flists}@footnote{See
-the section @uref{@value{MH-BOOK-HOME}/morseq.htm#flist, Searching for
+the section @uref{@value{MH-BOOK-HOME}/morseq.html#flist, Searching for
Sequences with flist} in the MH book.} to generate the list of
folders. The @samp{mh-speedbar} customization group contains the
following option which controls how often the speedbar calls
This search method does not require any setup.
Read @command{pick}(1) or the section
-@uref{@value{MH-BOOK-HOME}/finpic.htm, Finding Messages with pick} in
+@uref{@value{MH-BOOK-HOME}/finpic.html, Finding Messages with pick} in
the MH book to find out more about how to enter the criteria.
@subsection grep
message. However, you can give any of these a prefix argument to edit
the @command{pick} expression used to narrow the view@footnote{See
@command{pick}(1) or the section
-@uref{@value{MH-BOOK-HOME}/finpic.htm, Finding Messages with pick} in
+@uref{@value{MH-BOOK-HOME}/finpic.html, Finding Messages with pick} in
the MH book.}.
@cindex @samp{tick} sequence
For the whole scoop on MH sequences, refer to
@samp{mh-sequence}(5)@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/morseq.htm, More About Sequences} in the MH
+@uref{@value{MH-BOOK-HOME}/morseq.html, More About Sequences} in the MH
book.}. As you've read, several of the MH-E commands can operate on a
sequence, which is a shorthand for a range or group of messages. For
example, you might want to forward several messages to a friend or
With the exceptions of @kbd{S n} and @kbd{S w}, the underlying MH
command dealing with sequences is @command{mark}@footnote{See the
-section @uref{@value{MH-BOOK-HOME}/mmbwm.htm, Make Message Bookmarks
+section @uref{@value{MH-BOOK-HOME}/mmbwm.html, Make Message Bookmarks
with mark} in the MH book.}.
@node Junk, Miscellaneous, Sequences, Top
@cindex spam filters, Spamassassin
@cindex spam filters, bogofilter
-MH-E depends on @uref{http://www.spamassassin.org/, SpamAssassin},
+MH-E depends on @uref{http://spamassassin.apache.org/, SpamAssassin},
@uref{http://bogofilter.sourceforge.net/, bogofilter}, or
@uref{http://spamprobe.sourceforge.net/, SpamProbe} to throw the dreck
away. This chapter describes briefly how to configure these programs
SpamAssassin is one of the more popular spam filtering programs. Get
it from your local distribution or from the
-@uref{http://spamassassin.org/, SpamAssassin web site}.
+@uref{http://spamassassin.apache.org/, SpamAssassin web site}.
To use SpamAssassin, add the following recipes to @file{~/.procmailrc}:
be in the @code{mh-progs} directory (@pxref{Getting Started}). You may
link another program to @command{scan} (see @samp{mh-profile}(5)) to
produce a different type of listing@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/faswsprs.htm, Find and Specify with scan
+@uref{@value{MH-BOOK-HOME}/faswsprs.html, Find and Specify with scan
pick Ranges Sequences} in the MH book.}.
@cindex regular expressions, scan line formats
This regular expression describes a valid scan line. This is used to
eliminate error messages that are occasionally produced by
@command{inc}@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/reapre.htm, Reading Mail: inc show next
+@uref{@value{MH-BOOK-HOME}/reapre.html, Reading Mail: inc show next
prev} in the MH book.} or @command{scan} (default: @code{"^ *[0-9]"}).
@end vtable
@kindex M-x mh-version
Bug reports should be filed at
-@uref{https://sourceforge.net/bugs/?group_id=13357, SourceForge}. You
-need to be a SourceForge user to submit bug reports, but this is easy
-enough to do that it shouldn't be a restriction for you. Please
-include the output of @kbd{M-x mh-version} (@pxref{Miscellaneous}) in
-any bug report you send unless you're 110% positive we won't ask for
-it.
+@uref{https://sourceforge.net/tracker/?group_id=13357&atid=113357,
+SourceForge}. You need to be a SourceForge user to submit bug reports,
+but this is easy enough to do that it shouldn't be a restriction for
+you. Please include the output of @kbd{M-x mh-version}
+(@pxref{Miscellaneous}) in any bug report you send unless you're 110%
+positive we won't ask for it.
@node Mailing Lists, MH FAQ and Support, Bug Reports, Odds and Ends
@appendixsec MH-E Mailing Lists
@cindex support
You can find FAQs on MH-E at the
-@uref{https://sourceforge.net/support/?group_id=13357, Support
-Requests} page on SourceForge. If you don't find the answer to your
-question, file a support request and your question will become a new
-FAQ!
+@uref{https://sourceforge.net/tracker/?group_id=13357&atid=213357,
+Support Requests} page on SourceForge. If you don't find the answer to
+your question, file a support request and your question will become a
+new FAQ!
@node Getting MH-E, , MH FAQ and Support, Odds and Ends
@appendixsec Getting MH-E
MH-E has to offer (although we have no doubt that you will be
extremely interested in all new releases).
+@cindex Debian
+
+If you use Debian, you can install the Debian
+@uref{http://packages.debian.org/unstable/mail/mh-e, mh-e package}
+instead.
+
@cindex files, @samp{MH-E-NEWS}
@cindex files, @samp{README}
@cindex news