-@c This is part of the Emacs manual. -*- coding: iso-latin-1 -*-
-@c Copyright (C) 1985-1987, 1993-1995, 1997, 2000-2012
-@c Free Software Foundation, Inc.
+@c This is part of the Emacs manual. -*- coding: utf-8 -*-
+@c Copyright (C) 1985-1987, 1993-1995, 1997, 2000-2015 Free Software
+@c Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Calendar/Diary
@chapter The Calendar and the Diary
@kindex M-= @r{(Calendar mode)}
@findex calendar-count-days-region
To determine the number of days in a range, set the mark on one
-date using @kbd{C-SPC}, move point to another date, and type @kbd{M-=}
+date using @kbd{C-@key{SPC}}, move point to another date, and type @kbd{M-=}
(@code{calendar-count-days-region}). The numbers of days shown is
@emph{inclusive}; that is, it includes the days specified by mark and
point.
Display day-in-year (@code{calendar-print-day-of-year}).
@item C-c C-l
Regenerate the calendar window (@code{calendar-redraw}).
-@item SPC
+@item @key{SPC}
Scroll the next window up (@code{scroll-other-window}).
-@item DEL
+@item @key{DEL}
+@itemx S-@key{SPC}
Scroll the next window down (@code{scroll-other-window-down}).
@item q
Exit from calendar (@code{calendar-exit}).
non-Calendar-mode editing commands.)
@kindex SPC @r{(Calendar mode)}
- In Calendar mode, you can use @kbd{SPC} (@code{scroll-other-window})
-and @kbd{DEL} (@code{scroll-other-window-down}) to scroll the other
+ In Calendar mode, you can use @key{SPC} (@code{scroll-other-window})
+and @key{DEL} (@code{scroll-other-window-down}) to scroll the other
window (if there is one) up or down, respectively. This is handy when
you display a list of holidays or diary entries in another window.
@cindex calendar and HTML
The Calendar HTML commands produce files of HTML code that contain
-calendar and diary entries. Each file applies to one month, and has a
-name of the format @file{@var{yyyy}-@var{mm}.html}, where @var{yyyy} and
-@var{mm} are the four-digit year and two-digit month, respectively. The
-variable @code{cal-html-directory} specifies the default output
-directory for the HTML files.
+calendar, holiday, and diary entries. Each file applies to one month,
+and has a name of the format @file{@var{yyyy}-@var{mm}.html}, where
+@var{yyyy} and @var{mm} are the four-digit year and two-digit month,
+respectively. The variable @code{cal-html-directory} specifies the
+default output directory for the HTML files. To prevent holidays
+from being shown, customize @code{cal-html-holidays}.
@vindex cal-html-css-default
Diary entries enclosed by @code{<} and @code{>} are interpreted as
@item H y
Generate a calendar file for each month of a year, as well as an index
page (@code{cal-html-cursor-year}). By default, this command writes
-files to a @var{yyyy} subdirectory - if this is altered some hyperlinks
+files to a @var{yyyy} subdirectory---if this is altered some hyperlinks
between years will not work.
@end table
holidays}, which prompts for the month and year.
The holidays known to Emacs include United States holidays and the
-major Bahá'í, Chinese, Christian, Islamic, and Jewish holidays; also the
+major Bahá'í, Chinese, Christian, Islamic, and Jewish holidays; also the
solstices and equinoxes.
@findex list-holidays
(aside from Gregorian).
* To Other Calendar:: Converting the selected date to various calendars.
* From Other Calendar:: Moving to a date specified in another calendar.
-* Mayan Calendar:: Moving to a date specified in a Mayan calendar.
@end menu
@c FIXME perhaps most of the details should be moved to cal-xtra.
twelve ``terrestrial branches'' for a total of sixty names that are
repeated in a cycle of sixty.
-@cindex Bahá'í calendar
- The Bahá'í calendar system is based on a solar cycle of 19 months with
+@cindex Bahá'í calendar
+ The Bahá'í calendar system is based on a solar cycle of 19 months with
19 days each. The four remaining ``intercalary'' days are placed
between the 18th and 19th months.
(@code{calendar-french-print-date}).
@findex calendar-bahai-print-date
@item p b
-Display Bahá'í date for selected day
+Display Bahá'í date for selected day
(@code{calendar-bahai-print-date}).
@findex calendar-chinese-print-date
@item p C
Move to a date specified with an astronomical (Julian) day number
(@code{calendar-astro-goto-day-number}).
@item g b
-Move to a date specified in the Bahá'í calendar
+Move to a date specified in the Bahá'í calendar
(@code{calendar-bahai-goto-date}).
@item g h
Move to a date specified in the Hebrew calendar
this command first asks you for the date of death and the range of
years, and then displays the list of yahrzeit dates.
-@c FIXME move to emacs-xtra.
-@node Mayan Calendar
-@subsection Converting from the Mayan Calendar
-
- Here are the commands to select dates based on the Mayan calendar:
-
-@table @kbd
-@item g m l
-Move to a date specified by the long count calendar
-(@code{calendar-mayan-goto-long-count-date}).
-@item g m n t
-Move to the next occurrence of a place in the
-tzolkin calendar (@code{calendar-mayan-next-tzolkin-date}).
-@item g m p t
-Move to the previous occurrence of a place in the
-tzolkin calendar (@code{calendar-mayan-previous-tzolkin-date}).
-@item g m n h
-Move to the next occurrence of a place in the
-haab calendar (@code{calendar-mayan-next-haab-date}).
-@item g m p h
-Move to the previous occurrence of a place in the
-haab calendar (@code{calendar-mayan-previous-haab-date}).
-@item g m n c
-Move to the next occurrence of a place in the
-calendar round (@code{calendar-mayan-next-calendar-round-date}).
-@item g m p c
-Move to the previous occurrence of a place in the
-calendar round (@code{calendar-mayan-previous-calendar-round-date}).
-@end table
-
-@cindex Mayan long count
- To understand these commands, you need to understand the Mayan calendars.
-The @dfn{long count} is a counting of days with these units:
-
-@display
-1 kin = 1 day@ @ @ 1 uinal = 20 kin@ @ @ 1 tun = 18 uinal
-1 katun = 20 tun@ @ @ 1 baktun = 20 katun
-@end display
-
-@kindex g m @r{(Calendar mode)}
-@findex calendar-mayan-goto-long-count-date
-@noindent
-Thus, the long count date 12.16.11.16.6 means 12 baktun, 16 katun, 11
-tun, 16 uinal, and 6 kin. The Emacs calendar can handle Mayan long
-count dates as early as 7.17.18.13.3, but no earlier. When you use the
-@kbd{g m l} command, type the Mayan long count date with the baktun,
-katun, tun, uinal, and kin separated by periods.
-
-@findex calendar-mayan-previous-tzolkin-date
-@findex calendar-mayan-next-tzolkin-date
-@cindex Mayan tzolkin calendar
- The Mayan tzolkin calendar is a cycle of 260 days formed by a pair of
-independent cycles of 13 and 20 days. Since this cycle repeats
-endlessly, Emacs provides commands to move backward and forward to the
-previous or next point in the cycle. Type @kbd{g m p t} to go to the
-previous tzolkin date; Emacs asks you for a tzolkin date and moves point
-to the previous occurrence of that date. Similarly, type @kbd{g m n t}
-to go to the next occurrence of a tzolkin date.
-
-@findex calendar-mayan-previous-haab-date
-@findex calendar-mayan-next-haab-date
-@cindex Mayan haab calendar
- The Mayan haab calendar is a cycle of 365 days arranged as 18 months
-of 20 days each, followed by a 5-day monthless period. Like the tzolkin
-cycle, this cycle repeats endlessly, and there are commands to move
-backward and forward to the previous or next point in the cycle. Type
-@kbd{g m p h} to go to the previous haab date; Emacs asks you for a haab
-date and moves point to the previous occurrence of that date.
-Similarly, type @kbd{g m n h} to go to the next occurrence of a haab
-date.
-
-@c This is omitted because it is too long for smallbook format.
-@c @findex calendar-mayan-previous-calendar-round-date
-@findex calendar-mayan-next-calendar-round-date
-@cindex Mayan calendar round
- The Maya also used the combination of the tzolkin date and the haab
-date. This combination is a cycle of about 52 years called a
-@emph{calendar round}. If you type @kbd{g m p c}, Emacs asks you for
-both a haab and a tzolkin date and then moves point to the previous
-occurrence of that combination. Use @kbd{g m n c} to move point to the
-next occurrence of a combination. These commands signal an error if the
-haab/tzolkin date combination you have typed is impossible.
-
- Emacs uses strict completion (@pxref{Completion Exit}) whenever it
-asks you to type a Mayan name, so you don't have to worry about
-spelling.
-
@node Diary
@section The Diary
@cindex diary
The month can be a single month or a list of months. Thus you could change
the 11 above to @samp{'(1 2 3)} and have the entry apply to the last
Thursday of January, February, and March. If the month is @code{t}, the
-entry applies to all months of the year.@refill
+entry applies to all months of the year.
Each of the standard sexp diary entries takes an optional parameter
specifying the name of a face or a single-character string to use when
messages. While viewing such a message in Rmail or Gnus, do @kbd{M-x
diary-from-outlook} to import the entry. You can make this command
recognize additional appointment message formats by customizing the
-variable @code{diary-outlook-formats}.
+variable @code{diary-outlook-formats}. Other mail clients can set
+@code{diary-from-outlook-function} to an appropriate value.
@c FIXME the name of the RFC is hardly very relevant.
@cindex iCalendar support
2445---Internet Calendaring and Scheduling Core Object Specification
(iCalendar)'' (as well as the earlier vCalendar format).
-@c Importing works for ``ordinary'' (i.e. non-recurring) events, but
+@c Importing works for ``ordinary'' (i.e., non-recurring) events, but
@c (at present) may not work correctly (if at all) for recurring events.
@c Exporting of diary files into iCalendar files should work correctly
@c for most diary entries. This feature is a work in progress, so the
then, only an explicit @kbd{M-x timeclock-out} or @kbd{M-x
timeclock-change} will tell Emacs that the current interval is over.
-@cindex @file{.timelog} file
+@cindex @file{timelog} file
@vindex timeclock-file
@findex timeclock-reread-log
The timeclock functions work by accumulating the data in a file
-called @file{.timelog} in your home directory. You can specify a
+called @file{~/.emacs.d/timelog}. You can specify a
different name for this file by customizing the variable
@code{timeclock-file}. If you edit the timeclock file manually, or if
you change the value of any of timeclock's customizable variables, you