@c This is part of the Emacs manual.
-@c Copyright (C) 1985, 86, 87, 93, 94, 95, 97, 2000
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001,
+@c 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Text, Programs, Indentation, Top
@chapter Commands for Human Languages
that you edit with Emacs is text, in this sense of the word. The other
meaning is more restrictive: a sequence of characters in a human language
for humans to read (possibly after processing by a text formatter), as
-opposed to a program or commands for a program.
+opposed to a program or binary data. This chapter is concerned with
+editing text in the narrower sense.
Human languages have syntactic/stylistic conventions that can be
supported or used to advantage by editor commands: conventions involving
@end iftex
For text which contains embedded commands for text formatters, Emacs
-has other major modes, each for a particular text formatter. Thus, for
+has other major modes, each for a particular formatter. Thus, for
input to @TeX{}, you would use @TeX{}
@iftex
-mode (@pxref{TeX Mode}).
+mode (@pxref{TeX Mode,,@TeX{} Mode}).
@end iftex
-@ifinfo
+@ifnottex
mode.
-@end ifinfo
-For input to nroff, use Nroff mode.
+@end ifnottex
+For input to groff or nroff, use Nroff mode.
Instead of using a text formatter, you can edit formatted text in
WYSIWYG style (``what you see is what you get''), with Enriched mode.
@xref{Formatted Text}.
@end iftex
+@cindex ASCII art
+ If you need to edit pictures made out of text characters (commonly
+referred to as ``ASCII art''), use @kbd{M-x edit-picture} to enter
+Picture mode, a special major mode for editing such pictures.
+@iftex
+@xref{Picture Mode,,, emacs-xtra, Specialized Emacs Features}.
+@end iftex
+@ifnottex
+@xref{Picture Mode}.
+@end ifnottex
+
+
+@cindex skeletons
+@cindex templates
+@cindex autotyping
+@cindex automatic typing
The ``automatic typing'' features may be useful when writing text.
-@xref{Top, Autotyping, autotype, Features for Automatic Typing}.
+@inforef{Top,, autotype}.
@menu
* Words:: Moving over and killing words.
* Text Mode:: The major modes for editing text files.
* Outline Mode:: Editing outlines.
* TeX Mode:: Editing input to the formatter TeX.
+* HTML Mode:: Editing HTML, SGML, and XML files.
* Nroff Mode:: Editing input to the formatter nroff.
* Formatted Text:: Editing formatted text directly in WYSIWYG fashion.
+* Text Based Tables:: Editing text-based tables in WYSIWYG fashion.
@end menu
@node Words
Emacs has commands for moving over or operating on words. By convention,
the keys for them are all Meta characters.
-@c widecommands
@table @kbd
@item M-f
Move forward over a word (@code{forward-word}).
@item M-@@
Mark the end of the next word (@code{mark-word}).
@item M-t
-Transpose two words or drag a word across other words
+Transpose two words or drag a word across others
(@code{transpose-words}).
@end table
repeat counts. @kbd{M-f} with a negative argument moves backward, and
@kbd{M-b} with a negative argument moves forward. Forward motion
stops right after the last letter of the word, while backward motion
-stops right before the first letter.@refill
+stops right before the first letter.
@kindex M-d
@findex kill-word
@kindex M-DEL
@kbd{M-@key{DEL}} (@code{backward-kill-word}) kills the word before
point. It kills everything from point back to where @kbd{M-b} would
-move to. If point is after the space in @w{@samp{FOO, BAR}}, then
-@w{@samp{FOO, }} is killed. (If you wish to kill just @samp{FOO}, and
-not the comma and the space, use @kbd{M-b M-d} instead of
-@kbd{M-@key{DEL}}.)
+move to. For instance, if point is after the space in @w{@samp{FOO,
+BAR}}, it kills @w{@samp{FOO, }}. If you wish to kill just
+@samp{FOO}, and not the comma and the space, use @kbd{M-b M-d} instead
+of @kbd{M-@key{DEL}}.
@c Don't index M-t and transpose-words here, they are indexed in
@c fixit.texi, in the node "Transpose".
containing point with the following word. The delimiter characters between
the words do not move. For example, @w{@samp{FOO, BAR}} transposes into
@w{@samp{BAR, FOO}} rather than @samp{@w{BAR FOO,}}. @xref{Transpose}, for
-more on transposition and on arguments to transposition commands.
+more on transposition.
@kindex M-@@
@findex mark-word
scan for the place to put the mark. In Transient Mark mode, this command
activates the mark.
- The word commands' understanding of syntax is completely controlled by
-the syntax table. Any character can, for example, be declared to be a word
-delimiter. @xref{Syntax}.
+ The word commands' understanding of word boundaries is controlled
+by the syntax table. Any character can, for example, be declared to
+be a word delimiter. @xref{Syntax}.
@node Sentences
@section Sentences
The commands @kbd{M-a} and @kbd{M-e} (@code{backward-sentence} and
@code{forward-sentence}) move to the beginning and end of the current
sentence, respectively. They were chosen to resemble @kbd{C-a} and
-@kbd{C-e}, which move to the beginning and end of a line. Unlike them,
-@kbd{M-a} and @kbd{M-e} if repeated or given numeric arguments move over
-successive sentences.
+@kbd{C-e}, which move to the beginning and end of a line. Unlike
+them, @kbd{M-a} and @kbd{M-e} move over successive sentences if
+repeated.
Moving backward over a sentence places point just before the first
character of the sentence; moving forward places point right after the
There is also a command, @kbd{C-x @key{DEL}}
(@code{backward-kill-sentence}), for killing back to the beginning of a
sentence. This command is useful when you change your mind in the
-middle of composing text.@refill
+middle of composing text.
The sentence commands assume that you follow the American typist's
convention of putting two spaces at the end of a sentence; they consider
followed by the end of a line or two spaces, with any number of
@samp{)}, @samp{]}, @samp{'}, or @samp{"} characters allowed in between.
A sentence also begins or ends wherever a paragraph begins or ends.
+It is useful to follow this convention, because it makes a distinction
+between periods that end a sentence and periods that indicate
+abbreviations; that enables the Emacs sentence commands to distinguish,
+too. These commands do not stop for periods that indicate abbreviations.
-@vindex sentence-end
- The variable @code{sentence-end} controls recognition of the end of a
-sentence. It is a regexp that matches the last few characters of a
-sentence, together with the whitespace following the sentence. Its
-normal value is
-
-@example
-"[.?!][]\"')]*\\($\\| $\\|\t\\| \\)[ \t\n]*"
-@end example
-
-@noindent
-This example is explained in the section on regexps. @xref{Regexps}.
-
- If you want to use just one space between sentences, you should
-set @code{sentence-end} to this value:
+@vindex sentence-end-double-space
+ If you want to use just one space between sentences, you can set the
+variable @code{sentence-end-double-space} to @code{nil} to make the
+sentence commands stop for single spaces. However, this mode has a
+drawback: there is no way to distinguish between periods that end
+sentences and those that indicate abbreviations. For convenient and
+reliable editing, we therefore recommend you follow the two-space
+convention. The variable @code{sentence-end-double-space} also
+affects filling (@pxref{Fill Commands}) in related ways.
-@example
-"[.?!][]\"')]*\\($\\|\t\\| \\)[ \t\n]*"
-@end example
+@vindex sentence-end
+ The variable @code{sentence-end} controls how to recognize the end
+of a sentence. If non-@code{nil}, it is a regexp that matches the
+last few characters of a sentence, together with the whitespace
+following the sentence. If the value is @code{nil}, the default, then
+Emacs computes the regexp according to various criteria such as the
+value of @code{sentence-end-double-space}. @xref{Regexp Example}, for
+a detailed explanation of one of the regular expressions Emacs uses
+for this purpose.
-@noindent
-You should also set the variable @code{sentence-end-double-space} to
-@code{nil} so that the fill commands expect and leave just one space at
-the end of a sentence. Note that this makes it impossible to
-distinguish between periods that end sentences and those that indicate
-abbreviations.
+@vindex sentence-end-without-period
+ Some languages do not use periods to indicate the end of a sentence.
+For example, sentences in Thai end with a double space but without a
+period. Set the variable @code{sentence-end-without-period} to
+@code{t} in such cases.
@node Paragraphs
@section Paragraphs
@findex backward-paragraph
@findex forward-paragraph
- The Emacs commands for manipulating paragraphs are also Meta keys.
+ The Emacs commands for manipulating paragraphs are also on Meta keys.
@table @kbd
@item M-@{
@kbd{M-@{} moves to the beginning of the current or previous
paragraph, while @kbd{M-@}} moves to the end of the current or next
paragraph. Blank lines and text-formatter command lines separate
-paragraphs and are not considered part of any paragraph. In Fundamental
-mode, but not in Text mode, an indented line also starts a new
-paragraph. (If a paragraph is preceded by a blank line, these commands
-treat that blank line as the beginning of the paragraph.)
+paragraphs and are not considered part of any paragraph. If there is
+a blank line before the paragraph, @kbd{M-@{} moves to the blank line,
+because that is convenient in practice.
+
+ In Text mode, an indented line is not a paragraph break. If you
+want indented lines to have this effect, use Paragraph-Indent Text
+mode instead. @xref{Text Mode}.
In major modes for programs, paragraphs begin and end only at blank
-lines. This makes the paragraph commands continue to be useful even
-though there are no paragraphs per se.
+lines. This makes the paragraph commands useful, even though there
+are no paragraphs as such in a program.
- When there is a fill prefix, then paragraphs are delimited by all lines
-which don't start with the fill prefix. @xref{Filling}.
+ When you have set a fill prefix, then paragraphs are delimited by
+all lines which don't start with the fill prefix. @xref{Filling}.
@kindex M-h
@findex mark-paragraph
that separate paragraphs without being part of any paragraph (for
example, blank lines). Lines that start a new paragraph and are
contained in it must match only @code{paragraph-start}, not
-@code{paragraph-separate}. For example, in Fundamental mode,
-@code{paragraph-start} is @code{"[ @t{\}t@t{\}n@t{\}f]"} and
-@code{paragraph-separate} is @code{"[ @t{\}t@t{\}f]*$"}.@refill
+@code{paragraph-separate}. Each regular expression must match at the
+left margin. For example, in Fundamental mode, @code{paragraph-start}
+is @w{@code{"\f\\|[ \t]*$"}}, and @code{paragraph-separate} is
+@w{@code{"[ \t\f]*$"}}.
Normally it is desirable for page boundaries to separate paragraphs.
The default values of these variables recognize the usual separator for
@cindex pages
@cindex formfeed
Files are often thought of as divided into @dfn{pages} by the
-@dfn{formfeed} character (ASCII control-L, octal code 014). When you
-print hardcopy for a file, this character forces a page break; thus,
-each page of the file goes on a separate page on paper. Most Emacs
+@dfn{formfeed} character (@acronym{ASCII} control-L, octal code 014).
+When you print hardcopy for a file, this character forces a page break;
+thus, each page of the file goes on a separate page on paper. Most Emacs
commands treat the page-separator character just like any other
character: you can insert it with @kbd{C-q C-l}, and delete it with
@key{DEL}. Thus, you are free to paginate your file or not. However,
since pages are often meaningful divisions of the file, Emacs provides
commands to move over them and operate on them.
-@c WideCommands
@table @kbd
@item C-x [
Move point to previous page boundary (@code{backward-page}).
The @kbd{C-x C-p} command (@code{mark-page}) puts point at the
beginning of the current page and the mark at the end. The page
delimiter at the end is included (the mark follows it). The page
-delimiter at the front is excluded (point follows it). @kbd{C-x C-p
-C-w} is a handy way to kill a page to move it elsewhere. If you move to
-another page delimiter with @kbd{C-x [} and @kbd{C-x ]}, then yank the
-killed page, all the pages will be properly delimited once again. The
-reason @kbd{C-x C-p} includes only the following page delimiter in the
-region is to ensure that.
+delimiter at the front is excluded (point follows it). In Transient
+Mark mode, this command activates the mark.
+
+ @kbd{C-x C-p C-w} is a handy way to kill a page to move it
+elsewhere. If you move to another page delimiter with @kbd{C-x [} and
+@kbd{C-x ]}, then yank the killed page, all the pages will be properly
+delimited once again. The reason @kbd{C-x C-p} includes only the
+following page delimiter in the region is to ensure that.
A numeric argument to @kbd{C-x C-p} is used to specify which page to go
to, relative to the current one. Zero means the current page. One means
@kindex C-x l
@findex count-lines-page
The @kbd{C-x l} command (@code{count-lines-page}) is good for deciding
-where to break a page in two. It prints in the echo area the total number
+where to break a page in two. It displays in the echo area the total number
of lines in the current page, and then divides it up into those preceding
the current line and those following, as in
@vindex page-delimiter
The variable @code{page-delimiter} controls where pages begin. Its
value is a regexp that matches the beginning of a line that separates
-pages. The normal value of this variable is @code{"^@t{\}f"}, which
+pages. The normal value of this variable is @code{"^\f"}, which
matches a formfeed character at the beginning of a line.
@node Filling
@menu
* Auto Fill:: Auto Fill mode breaks long lines automatically.
-* Refill:: Keeping paragraphs filled.
* Fill Commands:: Commands to refill paragraphs and center lines.
* Fill Prefix:: Filling paragraphs that are indented
or in a comment, etc.
* Adaptive Fill:: How Emacs can determine the fill prefix automatically.
+* Refill:: Keeping paragraphs filled.
+* Longlines:: Editing text with very long lines.
@end menu
@node Auto Fill
@subsection Auto Fill Mode
@cindex Auto Fill mode
@cindex mode, Auto Fill
-@cindex word wrap
@dfn{Auto Fill} mode is a minor mode in which lines are broken
automatically when they become too wide. Breaking happens only when
comment; the variable @code{comment-multi-line} controls the choice
(@pxref{Comments}).
- Adaptive filling (see the following section) works for Auto Filling as
+ Adaptive filling (@pxref{Adaptive Fill}) works for Auto Filling as
well as for explicit fill commands. It takes a fill prefix
automatically from the second or first line of a paragraph.
cannot merge lines. So editing in the middle of a paragraph can result in
a paragraph that is not correctly filled. The easiest way to make the
paragraph properly filled again is usually with the explicit fill commands.
-@ifinfo
+@ifnottex
@xref{Fill Commands}.
-@end ifinfo
+@end ifnottex
Many users like Auto Fill mode and want to use it in all text files.
The section on init files says how to arrange this permanently for yourself.
@xref{Init File}.
-@node Refill
-@subsection Refill Mode
-@cindex refilling text, word processor style
-@cindex modes, Refill
-@cindex Refill minor mode
-
- Refill minor mode provides support for keeping paragraphs filled as
-you type or modify them in other ways. It provides an effect similar
-to typical word processor behavior. This works by running a
-paragraph-filling command at suitable times.
-
- When you are typing text, only characters which normally trigger
-auto filling, like the space character, will trigger refilling. This
-is to avoid making it too slow. Apart from self-inserting characters,
-other commands which modify the text cause refilling.
-
- The current implementation is preliminary and probably not robust.
-We expect to improve on it.
-
- To toggle the use of Refill mode in the current buffer, type
-@kbd{M-x refill-mode}.
-
@node Fill Commands
@subsection Explicit Fill Commands
@findex fill-region
To refill many paragraphs, use @kbd{M-x fill-region}, which
-divides the region into paragraphs and fills each of them.
+finds the paragraphs in the region and fills each of them.
@findex fill-region-as-paragraph
@kbd{M-q} and @code{fill-region} use the same criteria as @kbd{M-h}
for finding paragraph boundaries (@pxref{Paragraphs}). For more
control, you can use @kbd{M-x fill-region-as-paragraph}, which refills
-everything between point and mark. This command deletes any blank lines
-within the region, so separate blocks of text end up combined into one
-block.@refill
+everything between point and mark as a single paragraph. This command
+deletes any blank lines within the region, so separate blocks of text
+end up combined into one block.
@cindex justification
- A numeric argument to @kbd{M-q} causes it to @dfn{justify} the text as
-well as filling it. This means that extra spaces are inserted to make
-the right margin line up exactly at the fill column. To remove the
-extra spaces, use @kbd{M-q} with no argument. (Likewise for
+ A numeric argument to @kbd{M-q} tells it to @dfn{justify} the text
+as well as filling it. This means that extra spaces are inserted to
+make the right margin line up exactly at the fill column. To remove
+the extra spaces, use @kbd{M-q} with no argument. (Likewise for
@code{fill-region}.) Another way to control justification, and choose
-other styles of filling, is with the @code{justification} text property;
-see @ref{Format Justification}.
+other styles of filling, is with the @code{justification} text
+property; see @ref{Format Justification}.
@kindex M-s @r{(Text mode)}
@cindex centering
@findex center-line
The command @kbd{M-s} (@code{center-line}) centers the current line
within the current fill column. With an argument @var{n}, it centers
-@var{n} lines individually and moves past them.
+@var{n} lines individually and moves past them. This binding is
+made by Text mode and is available only in that and related modes
+(@pxref{Text Mode}).
@vindex fill-column
@kindex C-x f
the distinction between these two ways of using a period, the fill
commands do not break a line after a period followed by just one space.
-@vindex sentence-end-double-space
If the variable @code{sentence-end-double-space} is @code{nil}, the
fill commands expect and leave just one space at the end of a sentence.
Ordinarily this variable is @code{t}, so the fill commands insist on
If the variable @code{colon-double-space} is non-@code{nil}, the
fill commands put two spaces after a colon.
-@vindex sentence-end-without-period
- Some languages do not use period to indicate end of sentence. For
-example, a sentence in Thai text ends with double space but without a
-period. Set the variable @code{sentence-end-without-period} to
-@code{t} to tell the sentence commands that a period is not necessary.
+@vindex fill-nobreak-predicate
+ The variable @code{fill-nobreak-predicate} is a hook (an abnormal
+hook, @pxref{Hooks}) specifying additional conditions where
+line-breaking is not allowed. Each function is called with no
+arguments, with point at a place where Emacs is considering breaking
+the line. If a function returns a non-@code{nil} value, then that's
+a bad place to break the line. Two standard functions you can use are
+@code{fill-single-word-nobreak-p} (don't break after the first word of
+a sentence or before the last) and @code{fill-french-nobreak-p} (don't
+break after @samp{(} or before @samp{)}, @samp{:} or @samp{?}).
@node Fill Prefix
@subsection The Fill Prefix
@kindex C-x .
@findex set-fill-prefix
- To specify a fill prefix, move to a line that starts with the desired
-prefix, put point at the end of the prefix, and give the command
-@w{@kbd{C-x .}}@: (@code{set-fill-prefix}). That's a period after the
-@kbd{C-x}. To turn off the fill prefix, specify an empty prefix: type
-@w{@kbd{C-x .}}@: with point at the beginning of a line.@refill
+ To specify a fill prefix for the current buffer, move to a line that
+starts with the desired prefix, put point at the end of the prefix,
+and type @w{@kbd{C-x .}}@: (@code{set-fill-prefix}). (That's a period
+after the @kbd{C-x}.) To turn off the fill prefix, specify an empty
+prefix: type @w{@kbd{C-x .}}@: with point at the beginning of a line.
When a fill prefix is in effect, the fill commands remove the fill
-prefix from each line before filling and insert it on each line after
-filling. Auto Fill mode also inserts the fill prefix automatically when
-it makes a new line. The @kbd{C-o} command inserts the fill prefix on
-new lines it creates, when you use it at the beginning of a line
-(@pxref{Blank Lines}). Conversely, the command @kbd{M-^} deletes the
-prefix (if it occurs) after the newline that it deletes
+prefix from each line of the paragraph before filling and insert it on
+each line after filling. (The beginning of the first line of the
+paragraph is left unchanged, since often that is intentionally
+different.) Auto Fill mode also inserts the fill prefix automatically
+when it makes a new line. The @kbd{C-o} command inserts the fill
+prefix on new lines it creates, when you use it at the beginning of a
+line (@pxref{Blank Lines}). Conversely, the command @kbd{M-^} deletes
+the prefix (if it occurs) after the newline that it deletes
(@pxref{Indentation}).
For example, if @code{fill-column} is 40 and you set the fill prefix
automatically by setting the variable @code{adaptive-fill-function} to a
function. This function is called with point after the left margin of a
line, and it should return the appropriate fill prefix based on that
-line. If it returns @code{nil}, that means it sees no fill prefix in
-that line.
+line. If it returns @code{nil}, @code{adaptive-fill-regexp} gets
+a chance to find a prefix.
+
+@node Refill
+@subsection Refill Mode
+@cindex refilling text, word processor style
+@cindex modes, Refill
+@cindex Refill minor mode
+
+ Refill minor mode provides support for keeping paragraphs filled as
+you type or modify them in other ways. It provides an effect similar
+to typical word processor behavior. This works by running a
+paragraph-filling command at suitable times.
+
+ To toggle the use of Refill mode in the current buffer, type
+@kbd{M-x refill-mode}. When you are typing text, only characters
+which normally trigger auto filling, like the space character, will
+trigger refilling. This is to avoid making it too slow. Apart from
+self-inserting characters, other commands which modify the text cause
+refilling.
+
+ The current implementation is preliminary and not robust. You can
+get better ``line wrapping'' behavior using Longlines mode.
+@xref{Longlines}. However, Longlines mode has an important
+side-effect: the newlines that it inserts for you are not saved to
+disk, so the files that you make with Longlines mode will appear to be
+completely unfilled if you edit them without Longlines mode.
+
+@node Longlines
+@subsection Long Lines Mode
+@cindex refilling text, word processor style
+@cindex modes, Long Lines
+@cindex word wrap
+@cindex Long Lines minor mode
+
+ Long Lines mode is a minor mode for @dfn{word wrapping}; it lets you
+edit ``unfilled'' text files, which Emacs would normally display as a
+bunch of extremely long lines. Many text editors, such as those built
+into many web browsers, normally do word wrapping.
+
+@findex longlines-mode
+ To enable Long Lines mode, type @kbd{M-x longlines-mode}. If the
+text is full of long lines, this will ``wrap'' them
+immediately---i.e., break up to fit in the window. As you edit the
+text, Long Lines mode automatically re-wraps lines by inserting or
+deleting @dfn{soft newlines} as necessary (@pxref{Hard and Soft
+Newlines}.) These soft newlines won't show up when you save the
+buffer into a file, or when you copy the text into the kill ring,
+clipboard, or a register.
+
+@findex longlines-auto-wrap
+ Word wrapping is @emph{not} the same as ordinary filling
+(@pxref{Fill Commands}). It does not contract multiple spaces into a
+single space, recognize fill prefixes (@pxref{Fill Prefix}), or
+perform adaptive filling (@pxref{Adaptive Fill}). The reason for this
+is that a wrapped line is still, conceptually, a single line. Each
+soft newline is equivalent to exactly one space in that long line, and
+vice versa. However, you can still call filling functions such as
+@kbd{M-q}, and these will work as expected, inserting soft newlines
+that won't show up on disk or when the text is copied. You can even
+rely entirely on the normal fill commands by turning off automatic
+line wrapping, with @kbd{C-u M-x longlines-auto-wrap}. To turn
+automatic line wrapping back on, type @kbd{M-x longlines-auto-wrap}.
+
+@findex longlines-show-hard-newlines
+ Type @kbd{RET} to insert a hard newline, one which automatic
+refilling will not remove. If you want to see where all the hard
+newlines are, type @kbd{M-x longlines-show-hard-newlines}. This will
+mark each hard newline with a special symbol. The same command with a
+prefix argument turns this display off.
+
+ Long Lines mode does not change normal text files that are already
+filled, since the existing newlines are considered hard newlines.
+Before Long Lines can do anything, you need to transform each
+paragraph into a long line. One way is to set @code{fill-column} to a
+large number (e.g., @kbd{C-u 9999 C-x f}), re-fill all the paragraphs,
+and then set @code{fill-column} back to its original value.
@node Case
@section Case Conversion Commands
Emacs has commands for converting either a single word or any arbitrary
range of text to upper case or to lower case.
-@c WideCommands
@table @kbd
@item M-l
Convert following word to lower case (@code{downcase-word}).
This is convenient when you have just typed a word in the wrong case: you
can give the case conversion command and continue typing.
- If a word case conversion command is given in the middle of a word, it
-applies only to the part of the word which follows point. This is just
-like what @kbd{M-d} (@code{kill-word}) does. With a negative argument,
-case conversion applies only to the part of the word before point.
+ If a word case conversion command is given in the middle of a word,
+it applies only to the part of the word which follows point. (This is
+comparable to what @kbd{M-d} (@code{kill-word}) does.) With a
+negative argument, case conversion applies only to the part of the
+word before point.
@kindex C-x C-l
@kindex C-x C-u
@kindex TAB @r{(Text mode)}
Text mode defines @key{TAB} to run @code{indent-relative}
(@pxref{Indentation}), so that you can conveniently indent a line like
-the previous line. When the previous line is not indented,
-@code{indent-relative} runs @code{tab-to-tab-stop}, which uses Emacs tab
-stops that you can set (@pxref{Tab Stops}).
+the previous line.
Text mode turns off the features concerned with comments except when
-you explicitly invoke them. It changes the syntax table so that periods
-are not considered part of a word, while apostrophes, backspaces and
-underlines are considered part of words.
+you explicitly invoke them. It changes the syntax table so that
+single-quotes are considered part of words. However, if a word starts
+with single-quotes, these are treated as a prefix for purposes such as
+capitalization. That is, @kbd{M-c} will convert @samp{'hello'} into
+@samp{'Hello'}, as expected.
@cindex Paragraph-Indent Text mode
@cindex mode, Paragraph-Indent Text
@findex paragraph-indent-text-mode
@findex paragraph-indent-minor-mode
If you indent the first lines of paragraphs, then you should use
-Paragraph-Indent Text mode rather than Text mode. In this mode, you do
-not need to have blank lines between paragraphs, because the first-line
-indentation is sufficient to start a paragraph; however paragraphs in
-which every line is indented are not supported. Use @kbd{M-x
-paragraph-indent-text-mode} to enter this mode. Use @kbd{M-x
-paragraph-indent-minor-mode} to enter an equivalent minor mode, for
-instance during mail composition.
+Paragraph-Indent Text mode rather than Text mode. In this mode, you
+do not need to have blank lines between paragraphs, because the
+first-line indentation is sufficient to start a paragraph; however
+paragraphs in which every line is indented are not supported. Use
+@kbd{M-x paragraph-indent-text-mode} to enter this mode. Use @kbd{M-x
+paragraph-indent-minor-mode} to enable an equivalent minor mode in
+situations where you can't change the major mode---in mail
+composition, for instance.
@kindex M-TAB @r{(Text mode)}
- Text mode, and all the modes based on it, define @kbd{M-@key{TAB}} as
-the command @code{ispell-complete-word}, which performs completion of
-the partial word in the buffer before point, using the spelling
-dictionary as the space of possible words. @xref{Spelling}.
+ Text mode, and all the modes based on it, define @kbd{M-@key{TAB}}
+as the command @code{ispell-complete-word}, which performs completion
+of the partial word in the buffer before point, using the spelling
+dictionary as the space of possible words. @xref{Spelling}. If your
+window manager defines @kbd{M-@key{TAB}} to switch windows, you can
+type @kbd{@key{ESC} @key{TAB}} or @kbd{C-M-i}.
@vindex text-mode-hook
Entering Text mode runs the hook @code{text-mode-hook}. Other major
@code{text-mode-hook} can look at the value of @code{major-mode} to see
which of these modes is actually being entered. @xref{Hooks}.
-@ifinfo
+@ifnottex
Emacs provides two other modes for editing text that is to be passed
through a text formatter to produce fancy formatted printed output.
@xref{Nroff Mode}, for editing input to the formatter nroff.
-@xref{TeX Mode}, for editing input to the formatter TeX.
+@xref{TeX Mode,,@TeX{} Mode}, for editing input to the formatter TeX.
Another mode is used for editing outlines. It allows you to view the
text at various levels of detail. You can view either the outline
headings alone or both headings and text; you can also hide some of the
headings at lower levels from view to make the high level structure more
visible. @xref{Outline Mode}.
-@end ifinfo
+@end ifnottex
@node Outline Mode
@section Outline Mode
outline-mode} to switch to Outline mode as the major mode of the current
buffer.
- When Outline mode makes a line invisible, the line does not appear on
-the screen. The screen appears exactly as if the invisible line were
-deleted, except that an ellipsis (three periods in a row) appears at the
-end of the previous visible line (only one ellipsis no matter how many
-invisible lines follow).
+ When Outline mode makes a line invisible, the line does not appear
+on the screen. The screen appears exactly as if the invisible line
+were deleted, except that an ellipsis (three periods in a row) appears
+at the end of the previous visible line. (Multiple consecutive
+invisible lines produce just one ellipsis.)
Editing commands that operate on lines, such as @kbd{C-n} and
@kbd{C-p}, treat the text of the invisible line as part of the previous
-visible line. Killing an entire visible line, including its terminating
-newline, really kills all the following invisible lines along with it.
+visible line. Killing the ellipsis at the end of a visible line
+really kills all the following invisible lines.
Outline minor mode provides the same commands as the major mode,
Outline mode, but you can use it in conjunction with other major modes.
@menu
* Format: Outline Format. What the text of an outline looks like.
* Motion: Outline Motion. Special commands for moving through
- outlines.
+ outlines.
* Visibility: Outline Visibility. Commands to control what is visible.
* Views: Outline Views. Outlines and multiple views.
-* Foldout:: Folding editing.
+* Foldout:: Folding means zooming in on outlines.
@end menu
@node Outline Format
deeper heading lines and their body lines is called a @dfn{subtree}.
@vindex outline-regexp
- You can customize the criterion for distinguishing heading lines
-by setting the variable @code{outline-regexp}. Any line whose
-beginning has a match for this regexp is considered a heading line.
-Matches that start within a line (not at the left margin) do not count.
-The length of the matching text determines the level of the heading;
-longer matches make a more deeply nested level. Thus, for example,
-if a text formatter has commands @samp{@@chapter}, @samp{@@section}
-and @samp{@@subsection} to divide the document into chapters and
-sections, you could make those lines count as heading lines by
-setting @code{outline-regexp} to @samp{"@@chap\\|@@\\(sub\\)*section"}.
-Note the trick: the two words @samp{chapter} and @samp{section} are equally
+ You can customize the criterion for distinguishing heading lines by
+setting the variable @code{outline-regexp}. (The recommended ways to
+do this are in a major mode function or with a file local variable.)
+Any line whose beginning has a match for this regexp is considered a
+heading line. Matches that start within a line (not at the left
+margin) do not count.
+
+ The length of the matching text determines the level of the heading;
+longer matches make a more deeply nested level. Thus, for example, if
+a text formatter has commands @samp{@@chapter}, @samp{@@section} and
+@samp{@@subsection} to divide the document into chapters and sections,
+you could make those lines count as heading lines by setting
+@code{outline-regexp} to @samp{"@@chap\\|@@\\(sub\\)*section"}. Note
+the trick: the two words @samp{chapter} and @samp{section} are equally
long, but by defining the regexp to match only @samp{chap} we ensure
that the length of the text matched on a chapter heading is shorter,
-so that Outline mode will know that sections are contained in chapters.
-This works as long as no other command starts with @samp{@@chap}.
+so that Outline mode will know that sections are contained in
+chapters. This works as long as no other command starts with
+@samp{@@chap}.
@vindex outline-level
- You can change the rule for calculating the level of a heading line
-by setting the variable @code{outline-level}. The value of
-@code{outline-level} should be a function that takes no arguments and
-returns the level of the current heading. Some major modes such as C,
-Nroff, and Emacs Lisp mode set this variable and @code{outline-regexp}
-in order to work with Outline minor mode.
+ You can explicitly specify a rule for calculating the level of a
+heading line by setting the variable @code{outline-level}. The value
+of @code{outline-level} should be a function that takes no arguments
+and returns the level of the current heading. The recommended ways to
+set this variable are in a major mode command or with a file local
+variable.
@node Outline Motion
@subsection Outline Motion Commands
similarly backward. Both accept numeric arguments as repeat counts. The
names emphasize that invisible headings are skipped, but this is not really
a special feature. All editing commands that look for lines ignore the
-invisible lines automatically.@refill
+invisible lines automatically.
@findex outline-up-heading
@findex outline-forward-same-level
you can undo right past them. Making lines visible or invisible is simply
not recorded by the undo mechanism.
+ Many of these commands act on the ``current'' heading line. If
+point is on a heading line, that is the current heading line; if point
+is on a body line, the current heading line is the nearest preceding
+header line.
+
@table @kbd
-@item C-c C-t
-Make all body lines in the buffer invisible (@code{hide-body}).
-@item C-c C-a
-Make all lines in the buffer visible (@code{show-all}).
+@item C-c C-c
+Make the current heading line's body invisible (@code{hide-entry}).
+@item C-c C-e
+Make the current heading line's body visible (@code{show-entry}).
@item C-c C-d
-Make everything under this heading invisible, not including this
+Make everything under the current heading invisible, not including the
heading itself (@code{hide-subtree}).
@item C-c C-s
-Make everything under this heading visible, including body,
+Make everything under the current heading visible, including body,
subheadings, and their bodies (@code{show-subtree}).
@item C-c C-l
-Make the body of this heading line, and of all its subheadings,
+Make the body of the current heading line, and of all its subheadings,
invisible (@code{hide-leaves}).
@item C-c C-k
-Make all subheadings of this heading line, at all levels, visible
-(@code{show-branches}).
+Make all subheadings of the current heading line, at all levels,
+visible (@code{show-branches}).
@item C-c C-i
-Make immediate subheadings (one level down) of this heading line
-visible (@code{show-children}).
-@item C-c C-c
-Make this heading line's body invisible (@code{hide-entry}).
-@item C-c C-e
-Make this heading line's body visible (@code{show-entry}).
+Make immediate subheadings (one level down) of the current heading
+line visible (@code{show-children}).
+@item C-c C-t
+Make all body lines in the buffer invisible (@code{hide-body}).
+@item C-c C-a
+Make all lines in the buffer visible (@code{show-all}).
@item C-c C-q
Hide everything except the top @var{n} levels of heading lines
(@code{hide-sublevels}).
@kindex C-c C-c @r{(Outline mode)}
@kindex C-c C-e @r{(Outline mode)}
Two commands that are exact opposites are @kbd{C-c C-c}
-(@code{hide-entry}) and @kbd{C-c C-e} (@code{show-entry}). They are
-used with point on a heading line, and apply only to the body lines of
-that heading. Subheadings and their bodies are not affected.
+(@code{hide-entry}) and @kbd{C-c C-e} (@code{show-entry}). They apply
+to the body lines directly following the current heading line.
+Subheadings and their bodies are not affected.
@findex hide-subtree
@findex show-subtree
@kindex C-c C-s @r{(Outline mode)}
@kindex C-c C-d @r{(Outline mode)}
@cindex subtree (Outline mode)
- Two more powerful opposites are @kbd{C-c C-d} (@code{hide-subtree}) and
-@kbd{C-c C-s} (@code{show-subtree}). Both expect to be used when point is
-on a heading line, and both apply to all the lines of that heading's
-@dfn{subtree}: its body, all its subheadings, both direct and indirect, and
-all of their bodies. In other words, the subtree contains everything
-following this heading line, up to and not including the next heading of
-the same or higher rank.@refill
+ Two more powerful opposites are @kbd{C-c C-d} (@code{hide-subtree})
+and @kbd{C-c C-s} (@code{show-subtree}). Both apply to the current
+heading line's @dfn{subtree}: its body, all its subheadings, both
+direct and indirect, and all of their bodies. In other words, the
+subtree contains everything following the current heading line, up to
+and not including the next heading of the same or higher rank.
@findex hide-leaves
@findex show-branches
A little weaker than @code{show-branches} is @kbd{C-c C-i}
(@code{show-children}). It makes just the direct subheadings
visible---those one level down. Deeper subheadings remain invisible, if
-they were invisible.@refill
+they were invisible.
@findex hide-body
@findex show-all
@kindex C-c C-a @r{(Outline mode)}
Two commands have a blanket effect on the whole file. @kbd{C-c C-t}
(@code{hide-body}) makes all body lines invisible, so that you see just
-the outline structure. @kbd{C-c C-a} (@code{show-all}) makes all lines
-visible. These commands can be thought of as a pair of opposites even
-though @kbd{C-c C-a} applies to more than just body lines.
+the outline structure (as a special exception, it will not hide lines
+at the top of the file, preceding the first header line, even though
+these are technically body lines). @kbd{C-c C-a} (@code{show-all})
+makes all lines visible. These commands can be thought of as a pair
+of opposites even though @kbd{C-c C-a} applies to more than just body
+lines.
@findex hide-sublevels
@kindex C-c C-q @r{(Outline mode)}
@findex hide-other
@kindex C-c C-o @r{(Outline mode)}
The command @kbd{C-c C-o} (@code{hide-other}) hides everything except
-the heading or body text that point is in, plus its parents (the headers
-leading up from there to top level in the outline).
-
- You can turn off the use of ellipses at the ends of visible lines by
-setting @code{selective-display-ellipses} to @code{nil}. Then there is
-no visible indication of the presence of invisible lines.
+the heading and body text that point is in, plus its parents (the headers
+leading up from there to top level in the outline) and the top level
+headings.
+@findex reveal-mode
When incremental search finds text that is hidden by Outline mode,
it makes that part of the buffer visible. If you exit the search
-at that position, the text remains visible.
+at that position, the text remains visible. You can also
+automatically make text visible as you navigate in it by using
+@kbd{M-x reveal-mode}.
@node Outline Views
@subsection Viewing One Outline in Multiple Views
nested portion of the outline, while hiding its relatives at higher
levels.
- Consider an Outline mode buffer all the text and subheadings under
+ Consider an Outline mode buffer with all the text and subheadings under
level-1 headings hidden. To look at what is hidden under one of these
headings, you could use @kbd{C-c C-e} (@kbd{M-x show-entry}) to expose
the body, or @kbd{C-c C-i} to expose the child (level-2) headings.
@findex foldout-zoom-subtree
With Foldout, you use @kbd{C-c C-z} (@kbd{M-x foldout-zoom-subtree}).
This exposes the body and child subheadings, and narrows the buffer so
-that only the level-1 heading, the body and the level-2 headings are
+that only the @w{level-1} heading, the body and the level-2 headings are
visible. Now to look under one of the level-2 headings, position the
cursor on it and use @kbd{C-c C-z} again. This exposes the level-2 body
and its level-3 child subheadings and narrows the buffer again. Zooming
in on successive subheadings can be done as much as you like. A string
-in the modeline shows how deep you've gone.
+in the mode line shows how deep you've gone.
When zooming in on a heading, to see only the child subheadings specify
a numeric argument: @kbd{C-u C-c C-z}. The number of levels of children
can be specified too (compare @kbd{M-x show-children}), e.g.@: @kbd{M-2
C-c C-z} exposes two levels of child subheadings. Alternatively, the
-body can be spcified with a negative argument: @kbd{M-- C-c C-z}. The
+body can be specified with a negative argument: @kbd{M-- C-c C-z}. The
whole subtree can be expanded, similarly to @kbd{C-c C-s} (@kbd{M-x
show-subtree}), by specifying a zero argument: @kbd{M-0 C-c C-z}.
To unzoom (exit) a fold, use @kbd{C-c C-x} (@kbd{M-x foldout-exit-fold}).
This hides all the text and subheadings under the top-level heading and
returns you to the previous view of the buffer. Specifying a numeric
-argument exits that many levels of folds. Specifying a zero argument exits all
-folds.
+argument exits that many levels of folds. Specifying a zero argument
+exits all folds.
To cancel the narrowing of a fold without hiding the text and
subheadings, specify a negative argument. For example, @kbd{M--2 C-c
folds, and for showing and hiding text:
@table @asis
-@item @kbd{M-C-Mouse-1} zooms in on the heading clicked on
-@table @asis
-@item single click
-expose body.
-@item double click
-expose subheadings.
-@item triple click
-expose body and subheadings.
-@item quad click
-expose entire subtree.
-@end table
-@item @kbd{M-C-Mouse-2} exposes text under the heading clicked on
-@table @r
-@item single click
-expose body.
-@item double click
-expose subheadings.
-@item triple click
-expose body and subheadings.
-@item quad click
-expose entire subtree.
-@end table
-@item @kbd{M-C-Mouse-3} hides text under the heading clicked on or exits fold
-@table @r
-@item single click
-hide subtree.
-@item double click
-exit fold and hide text.
-@item triple click
-exit fold without hiding text.
-@item quad click
-exit all folds and hide text.
-@end table
+@item @kbd{C-M-Mouse-1} zooms in on the heading clicked on
+@itemize @asis
+@item
+single click: expose body.
+@item
+double click: expose subheadings.
+@item
+triple click: expose body and subheadings.
+@item
+quad click: expose entire subtree.
+@end itemize
+@item @kbd{C-M-Mouse-2} exposes text under the heading clicked on
+@itemize @asis
+@item
+single click: expose body.
+@item
+double click: expose subheadings.
+@item
+triple click: expose body and subheadings.
+@item
+quad click: expose entire subtree.
+@end itemize
+@item @kbd{C-M-Mouse-3} hides text under the heading clicked on or exits fold
+@itemize @asis
+@item
+single click: hide subtree.
+@item
+double click: exit fold and hide text.
+@item
+triple click: exit fold without hiding text.
+@item
+quad click: exit all folds and hide text.
+@end itemize
@end table
@vindex foldout-mouse-modifiers
(eval-after-load "outline" '(require 'foldout))
@end example
-@node TeX Mode, Nroff Mode, Outline Mode, Text
+@node TeX Mode
@section @TeX{} Mode
@cindex @TeX{} mode
@cindex La@TeX{} mode
@cindex Sli@TeX{} mode
+@cindex Doc@TeX{} mode
@cindex mode, @TeX{}
@cindex mode, La@TeX{}
@cindex mode, Sli@TeX{}
+@cindex mode, Doc@TeX{}
@findex tex-mode
@findex plain-tex-mode
@findex latex-mode
@findex slitex-mode
+@findex doctex-mode
- @TeX{} is a powerful text formatter written by Donald Knuth; it is also
-free, like GNU Emacs. La@TeX{} is a simplified input format for @TeX{},
-implemented by @TeX{} macros; it comes with @TeX{}. Sli@TeX{} is a special
-form of La@TeX{}.@footnote{Sli@TeX{} is obsoleted by the @samp{slides}
-document class in recent La@TeX{} versions.}
+ @TeX{} is a powerful text formatter written by Donald Knuth; it is
+also free software, like GNU Emacs. La@TeX{} is a simplified input
+format for @TeX{}, implemented by @TeX{} macros; it comes with @TeX{}.
+Sli@TeX{} is a special form of La@TeX{}.@footnote{Sli@TeX{} is
+obsoleted by the @samp{slides} document class and other alternative
+packages in recent La@TeX{} versions.} Doc@TeX{} (@file{.dtx}) is a
+special file format in which the La@TeX{} sources are written,
+combining sources with documentation.
Emacs has a special @TeX{} mode for editing @TeX{} input files.
It provides facilities for checking the balance of delimiters and for
invoking @TeX{} on all or part of the file.
@vindex tex-default-mode
- @TeX{} mode has three variants, Plain @TeX{} mode, La@TeX{} mode, and
-Sli@TeX{} mode (these three distinct major modes differ only slightly).
-They are designed for editing the three different formats. The command
-@kbd{M-x tex-mode} looks at the contents of the buffer to determine
-whether the contents appear to be either La@TeX{} input or Sli@TeX{}
-input; if so, it selects the appropriate mode. If the file contents do
-not appear to be La@TeX{} or Sli@TeX{}, it selects Plain @TeX{} mode.
-If the contents are insufficient to determine this, the variable
+ @TeX{} mode has four variants: Plain @TeX{} mode, La@TeX{} mode,
+Sli@TeX{} mode, and Doc@TeX{} mode (these distinct major modes differ
+only slightly). They are designed for editing the four different
+formats. The command @kbd{M-x tex-mode} looks at the contents of the
+buffer to determine whether the contents appear to be either La@TeX{}
+input, Sli@TeX{}, or Doc@TeX{} input; if so, it selects the
+appropriate mode. If the file contents do not appear to be La@TeX{},
+Sli@TeX{} or Doc@TeX{}, it selects Plain @TeX{} mode. If the contents
+are insufficient to determine this, the variable
@code{tex-default-mode} controls which mode is used.
When @kbd{M-x tex-mode} does not guess right, you can use the commands
-@kbd{M-x plain-tex-mode}, @kbd{M-x latex-mode}, and @kbd{M-x
-slitex-mode} to select explicitly the particular variants of @TeX{}
-mode.
+@kbd{M-x plain-tex-mode}, @kbd{M-x latex-mode}, @kbd{M-x slitex-mode},
+and @kbd{doctex-mode} to select explicitly the particular variants of
+@TeX{} mode.
@menu
* Editing: TeX Editing. Special commands for editing in TeX mode.
@kindex C-j @r{(@TeX{} mode)}
There are two commands for checking the matching of braces. @kbd{C-j}
(@code{tex-terminate-paragraph}) checks the paragraph before point, and
-inserts two newlines to start a new paragraph. It prints a message in
+inserts two newlines to start a new paragraph. It outputs a message in
the echo area if any mismatch is found. @kbd{M-x tex-validate-region}
checks a region, paragraph by paragraph. The errors are listed in the
@samp{*Occur*} buffer, and you can use @kbd{C-c C-c} or @kbd{Mouse-2} in
C-f} command (@code{tex-view}).
@item C-c C-q
Show the printer queue (@code{tex-show-print-queue}).
+@item C-c C-c
+Invoke some other compilation command on the entire current buffer
+(@code{tex-compile}).
@end table
@findex tex-buffer
you can do so by setting the values of the variables @code{tex-run-command},
@code{latex-run-command}, @code{slitex-run-command},
@code{tex-dvi-print-command}, @code{tex-dvi-view-command}, and
-@code{tex-show-queue-command}. You @emph{must} set the value of
-@code{tex-dvi-view-command} for your particular terminal; this variable
-has no default value. The other variables have default values that may
+@code{tex-show-queue-command}. The default values may
(or may not) be appropriate for your system.
Normally, the file name given to these commands comes at the end of
Type @kbd{C-c C-k} (@code{tex-kill-job}) to kill the @TeX{} process if
you see that its output is no longer useful. Using @kbd{C-c C-b} or
-@kbd{C-c C-r} also kills any @TeX{} process still running.@refill
+@kbd{C-c C-r} also kills any @TeX{} process still running.
@findex tex-region
@kindex C-c C-r @r{(@TeX{} mode)}
modified buffers. Generally, you need to use (@code{tex-file}) twice to
get the cross-references right.
-@vindex tex-start-options-string
- The value of the variable @code{tex-start-options-string} specifies
-options for the @TeX{} run. The default value causes @TeX{} to run in
-nonstopmode. To run @TeX{} interactively, set the variable to @code{""}.
+@vindex tex-start-options
+ The value of the variable @code{tex-start-options} specifies
+options for the @TeX{} run.
+
+@vindex tex-start-commands
+ The value of the variable @code{tex-start-commands} specifies @TeX{}
+commands for starting @TeX{}. The default value causes @TeX{} to run
+in nonstop mode. To run @TeX{} interactively, set the variable to
+@code{""}.
@vindex tex-main-file
Large @TeX{} documents are often split into several files---one main
For La@TeX{} files, you can use Bib@TeX{} to process the auxiliary
file for the current buffer's file. Bib@TeX{} looks up bibliographic
citations in a data base and prepares the cited references for the
-bibliography section. The command @kbd{C-c TAB}
+bibliography section. The command @kbd{C-c @key{TAB}}
(@code{tex-bibtex-file}) runs the shell command
(@code{tex-bibtex-command}) to produce a @samp{.bbl} file for the
current buffer's file. Generally, you need to do @kbd{C-c C-f}
(@code{tex-file}) once to generate the @samp{.aux} file, then do
-@kbd{C-c TAB} (@code{tex-bibtex-file}), and then repeat @kbd{C-c C-f}
+@kbd{C-c @key{TAB}} (@code{tex-bibtex-file}), and then repeat @kbd{C-c C-f}
(@code{tex-file}) twice more to get the cross-references correct.
+@findex tex-compile
+@kindex C-c C-c @r{(@TeX{} mode)}
+ To invoke some other compilation program on the current @TeX{}
+buffer, type @kbd{C-c C-c} (@code{tex-compile}). This command knows
+how to pass arguments to many common programs, including
+@file{pdflatex}, @file{yap}, @file{xdvi}, and @file{dvips}. You can
+select your desired compilation program using the standard completion
+keys (@pxref{Completion}).
+
@node TeX Misc
@subsection @TeX{} Mode Miscellany
@findex iso-iso2gtex
@findex iso-gtex2iso
@cindex Latin-1 @TeX{} encoding
-@TeX{} encoding
+@cindex @TeX{} encoding
The commands @kbd{M-x iso-iso2tex}, @kbd{M-x iso-tex2iso}, @kbd{M-x
iso-iso2gtex} and @kbd{M-x iso-gtex2iso} can be used to convert
between Latin-1 encoded files and @TeX{}-encoded equivalents.
@findex tildify-region
@cindex ties, @TeX{}, inserting
@cindex hard spaces, @TeX{}, inserting
-@cindex SGML
-@cindex HTML
The commands @kbd{M-x tildify-buffer} and @kbd{M-x tildify-region}
insert @samp{~} (@dfn{tie}) characters where they are conventionally
required. This is set up for Czech---customize the group
@cindex references, La@TeX{}
@cindex La@TeX{} references
For managing all kinds of references for La@TeX{}, you can use
-Ref@TeX{}. @xref{Top, , RefTeX, reftex}.
+Ref@TeX{}. @inforef{Top,, reftex}.
+
+@node HTML Mode
+@section SGML, XML, and HTML Modes
+
+ The major modes for SGML and HTML include indentation support and
+commands to operate on tags. This section describes the special
+commands of these modes. (HTML mode is a slightly customized variant
+of SGML mode.)
+
+@table @kbd
+@item C-c C-n
+@kindex C-c C-n @r{(SGML mode)}
+@findex sgml-name-char
+Interactively specify a special character and insert the SGML
+@samp{&}-command for that character.
+
+@item C-c C-t
+@kindex C-c C-t @r{(SGML mode)}
+@findex sgml-tag
+Interactively specify a tag and its attributes (@code{sgml-tag}).
+This command asks you for a tag name and for the attribute values,
+then inserts both the opening tag and the closing tag, leaving point
+between them.
+
+With a prefix argument @var{n}, the command puts the tag around the
+@var{n} words already present in the buffer after point. With
+@minus{}1 as argument, it puts the tag around the region. (In
+Transient Mark mode, it does this whenever a region is active.)
+
+@item C-c C-a
+@kindex C-c C-a @r{(SGML mode)}
+@findex sgml-attributes
+Interactively insert attribute values for the current tag
+(@code{sgml-attributes}).
+
+@item C-c C-f
+@kindex C-c C-f @r{(SGML mode)}
+@findex sgml-skip-tag-forward
+Skip across a balanced tag group (which extends from an opening tag
+through its corresponding closing tag) (@code{sgml-skip-tag-forward}).
+A numeric argument acts as a repeat count.
+
+@item C-c C-b
+@kindex C-c C-b @r{(SGML mode)}
+@findex sgml-skip-tag-backward
+Skip backward across a balanced tag group (which extends from an
+opening tag through its corresponding closing tag)
+(@code{sgml-skip-tag-forward}). A numeric argument acts as a repeat
+count.
+
+@item C-c C-d
+@kindex C-c C-d @r{(SGML mode)}
+@findex sgml-delete-tag
+Delete the tag at or after point, and delete the matching tag too
+(@code{sgml-delete-tag}). If the tag at or after point is an opening
+tag, delete the closing tag too; if it is a closing tag, delete the
+opening tag too.
+
+@item C-c ? @var{tag} @key{RET}
+@kindex C-c ? @r{(SGML mode)}
+@findex sgml-tag-help
+Display a description of the meaning of tag @var{tag}
+(@code{sgml-tag-help}). If the argument @var{tag} is empty, describe
+the tag at point.
+
+@item C-c /
+@kindex C-c / @r{(SGML mode)}
+@findex sgml-close-tag
+Insert a close tag for the innermost unterminated tag
+(@code{sgml-close-tag}). If called from within a tag or a comment,
+close this element instead of inserting a close tag.
+
+@item C-c 8
+@kindex C-c 8 @r{(SGML mode)}
+@findex sgml-name-8bit-mode
+Toggle a minor mode in which Latin-1 characters insert the
+corresponding SGML commands that stand for them, instead of the
+characters themselves (@code{sgml-name-8bit-mode}).
+
+@item C-c C-v
+@kindex C-c C-v @r{(SGML mode)}
+@findex sgml-validate
+Run a shell command (which you must specify) to validate the current
+buffer as SGML (@code{sgml-validate}).
+
+@item C-c TAB
+@kindex C-c TAB @r{(SGML mode)}
+@findex sgml-tags-invisible
+Toggle the visibility of existing tags in the buffer. This can be
+used as a cheap preview.
+@end table
+
+@vindex sgml-xml-mode
+ SGML mode and HTML mode support XML also. In XML, every opening tag
+must have an explicit closing tag. When @code{sgml-xml-mode} is
+non-@code{nil}, SGML mode and HTML mode always insert explicit
+closing tags. When you visit a file, these modes determine from the
+file contents whether it is XML or not, and set @code{sgml-xml-mode}
+accordingly, so that they do the right thing for the file in either
+case.
@node Nroff Mode
@section Nroff Mode
@item M-p
Like @kbd{M-n} but move up (@code{backward-text-line}).
@item M-?
-Prints in the echo area the number of text lines (lines that are not
+Displays in the echo area the number of text lines (lines that are not
nroff commands) in the region (@code{count-text-lines}).
@end table
margins, and types of filling and justification. In the future, we plan
to implement other formatting features as well.
- Enriched mode is a minor mode (@pxref{Minor Modes}). Typically it is
-used in conjunction with Text mode (@pxref{Text Mode}). However, you
-can also use it with other major modes such as Outline mode and
+ Enriched mode is a minor mode (@pxref{Minor Modes}). It is
+typically used in conjunction with Text mode (@pxref{Text Mode}), but
+you can also use it with other major modes such as Outline mode and
Paragraph-Indent Text mode.
@cindex text/enriched MIME format
* Color: Format Colors. Changing the color of text.
* Indent: Format Indentation. Changing the left and right margins.
* Justification: Format Justification.
- Centering, setting text flush with the
+ Centering, setting text flush with the
left or right margin, etc.
* Other: Format Properties. The "special" text properties submenu.
* Forcing Enriched Mode:: How to force use of Enriched mode.
@node Requesting Formatted Text
@subsection Requesting to Edit Formatted Text
- Whenever you visit a file that Emacs saved in the text/enriched format,
-Emacs automatically converts the formatting information in the file into
-Emacs's own internal format (text properties), and turns on Enriched
-mode.
+ Whenever you visit a file that Emacs saved in the text/enriched
+format, Emacs automatically converts the formatting information in the
+file into Emacs's own internal format (known as @dfn{text
+properties}), and turns on Enriched mode.
@findex enriched-mode
To create a new file of formatted text, first visit the nonexistent
recognize the format, reconvert the text, and turn on Enriched mode
again.
-@vindex enriched-fill-after-visiting
- Normally, after visiting a file in text/enriched format, Emacs refills
-each paragraph to fit the specified right margin. You can turn off this
-refilling, to save time, by setting the variable
-@code{enriched-fill-after-visiting} to @code{nil} or to @code{ask}.
-
- However, when visiting a file that was saved from Enriched mode, there
-is no need for refilling, because Emacs saves the right margin settings
-along with the text.
-
@vindex enriched-translations
You can add annotations for saving additional text properties, which
Emacs normally does not save, by adding to @code{enriched-translations}.
@samp{x-read-only}. This ensures that they will not conflict with
standard annotations that may be added later.
+ @xref{Text Properties,,, elisp, the Emacs Lisp Reference Manual},
+for more information about text properties.
+
@node Hard and Soft Newlines
@subsection Hard and Soft Newlines
@cindex hard newline
@cindex soft newline
@cindex newlines, hard and soft
+@cindex use-hard-newlines
In formatted text, Emacs distinguishes between two different kinds of
-newlines, @dfn{hard} newlines and @dfn{soft} newlines.
+newlines, @dfn{hard} newlines and @dfn{soft} newlines. (You can enable
+or disable this feature separately in any buffer with the command
+@code{use-hard-newlines}.)
Hard newlines are used to separate paragraphs, or items in a list, or
anywhere that there should always be a line break regardless of the
There are two ways to alter the formatting information for a formatted
text file: with keyboard commands, and with the mouse.
- The easiest way to add properties to your document is by using the Text
+ The easiest way to add properties to your document is with the Text
Properties menu. You can get to this menu in two ways: from the Edit
-menu in the menu bar, or with @kbd{C-Mouse-2} (hold the @key{CTRL} key
-and press the middle mouse button).
+menu in the menu bar (use @kbd{@key{F10} e t} if you have no mouse),
+or with @kbd{C-Mouse-2} (hold the @key{CTRL} key and press the middle
+mouse button). There are also keyboard commands described in the
+following section.
Most of the items in the Text Properties menu lead to other submenus.
These are described in the sections that follow. Some items run
commands directly:
@table @code
-@findex facemenu-remove-props
-@item Remove Properties
-Delete from the region all the text properties that the Text Properties
-menu works with (@code{facemenu-remove-props}).
+@findex facemenu-remove-face-props
+@item Remove Face Properties
+Delete from the region all face and color text properties
+(@code{facemenu-remove-face-props}).
@findex facemenu-remove-all
-@item Remove All
+@item Remove Text Properties
Delete @emph{all} text properties from the region
(@code{facemenu-remove-all}).
-@findex list-text-properties-at
-@item List Properties
-List all the text properties of the character following point
-(@code{list-text-properties-at}).
+@findex describe-text-properties
+@cindex text properties of characters
+@cindex overlays at character position
+@cindex widgets at buffer position
+@cindex buttons at buffer position
+@item Describe Properties
+List all the text properties, widgets, buttons, and overlays of the
+character following point (@code{describe-text-properties}).
@item Display Faces
-Display a list of all the defined faces.
+Display a list of all the defined faces (@code{list-faces-display}).
@item Display Colors
-Display a list of all the defined colors.
+Display a list of all the defined colors (@code{list-colors-display}).
@end table
-
+
@node Format Faces
@subsection Faces in Formatted Text
The Faces submenu lists various Emacs faces including @code{bold},
-@code{italic}, and @code{underline}. Selecting one of these adds the
-chosen face to the region. @xref{Faces}. You can also specify a face
-with these keyboard commands:
+@code{italic}, and @code{underline} (@pxref{Faces}). These menu items
+operate on the region if it is active and nonempty. Otherwise, they
+specify to use that face for an immediately following self-inserting
+character. Instead of the menu, you can use these keyboard commands:
@table @kbd
-@kindex M-g d @r{(Enriched mode)}
+@kindex M-o d @r{(Enriched mode)}
@findex facemenu-set-default
-@item M-g d
-Set the region, or the next inserted character, to the @code{default} face
-(@code{facemenu-set-default}).
-@kindex M-g b @r{(Enriched mode)}
+@item M-o d
+Remove all @code{face} properties from the region (which includes
+specified colors), or force the following inserted character to have no
+@code{face} property (@code{facemenu-set-default}).
+@kindex M-o b @r{(Enriched mode)}
@findex facemenu-set-bold
-@item M-g b
-Set the region, or the next inserted character, to the @code{bold} face
-(@code{facemenu-set-bold}).
-@kindex M-g i @r{(Enriched mode)}
+@item M-o b
+Add the face @code{bold} to the region or to the following inserted
+character (@code{facemenu-set-bold}).
+@kindex M-o i @r{(Enriched mode)}
@findex facemenu-set-italic
-@item M-g i
-Set the region, or the next inserted character, to the @code{italic} face
-(@code{facemenu-set-italic}).
-@kindex M-g l @r{(Enriched mode)}
+@item M-o i
+Add the face @code{italic} to the region or to the following inserted
+character (@code{facemenu-set-italic}).
+@kindex M-o l @r{(Enriched mode)}
@findex facemenu-set-bold-italic
-@item M-g l
-Set the region, or the next inserted character, to the @code{bold-italic} face
-(@code{facemenu-set-bold-italic}).
-@kindex M-g u @r{(Enriched mode)}
+@item M-o l
+Add the face @code{bold-italic} to the region or to the following
+inserted character (@code{facemenu-set-bold-italic}).
+@kindex M-o u @r{(Enriched mode)}
@findex facemenu-set-underline
-@item M-g u
-Set the region, or the next inserted character, to the @code{underline} face
-(@code{facemenu-set-underline}).
-@kindex M-g o @r{(Enriched mode)}
+@item M-o u
+Add the face @code{underline} to the region or to the following inserted
+character (@code{facemenu-set-underline}).
+@kindex M-o o @r{(Enriched mode)}
@findex facemenu-set-face
-@item M-g o @var{face} @key{RET}
-Set the region, or the next inserted character, to the face @var{face}
-(@code{facemenu-set-face}).
+@item M-o o @var{face} @key{RET}
+Add the face @var{face} to the region or to the following inserted
+character (@code{facemenu-set-face}).
@end table
- If you use these commands with a prefix argument---or, in Transient Mark
-mode, if the region is not active---then these commands specify a face
-to use for your next self-inserting input. @xref{Transient Mark}. This
-applies to both the keyboard commands and the menu commands.
+ With a prefix argument, all these commands apply to an immediately
+following self-inserting character, disregarding the region.
+
+ A self-inserting character normally inherits the @code{face}
+property (and most other text properties) from the preceding character
+in the buffer. If you use the above commands to specify face for the
+next self-inserting character, or the next section's commands to
+specify a foreground or background color for it, then it does not
+inherit the @code{face} property from the preceding character; instead
+it uses whatever you specified. It will still inherit other text
+properties, though.
+
+ Strictly speaking, these commands apply only to the first following
+self-inserting character that you type. But if you insert additional
+characters after it, they will inherit from the first one. So it
+appears that these commands apply to all of them.
Enriched mode defines two additional faces: @code{excerpt} and
@code{fixed}. These correspond to codes used in the text/enriched file
same as @code{italic} unless you customize it (@pxref{Face Customization}).
The @code{fixed} face means, ``Use a fixed-width font for this part
-of the text.'' This makes a visible difference only if you have
-specified a variable-width font in the default face; however, even if
-the default font is fixed-width, applying the @code{fixed} face to a
-part of the text will cause that part of the text to appear in a
-fixed-width font, if the file is ever displayed with a variable-width
-default font. This applies to Emacs and to other systems that display
-text/enriched format. So if you specifically want a certain part of
-the text to use a fixed-width font, you should specify the
-@code{fixed} face for that part.
-
- The @code{fixed} face is normally set up to use a different font
-from the default, even if the default face is also fixed-width.
-Different systems have different fonts installed, so you may need to
-customize this. @xref{Face Customization}.
+of the text.'' Applying the @code{fixed} face to a part of the text
+will cause that part of the text to appear in a fixed-width font, even
+if the default font is variable-width. This applies to Emacs and to
+other systems that display text/enriched format. So if you
+specifically want a certain part of the text to use a fixed-width
+font, you should specify the @code{fixed} face for that part.
+
+ By default, the @code{fixed} face looks the same as @code{bold}.
+This is an attempt to distinguish it from @code{default}. You may
+wish to customize @code{fixed} to some other fixed-width medium font.
+@xref{Face Customization}.
If your terminal cannot display different faces, you will not be
able to see them, but you can still edit documents containing faces,
for specifying the background color. Each color menu lists all the
colors that you have used in Enriched mode in the current Emacs session.
- If you specify a color with a prefix argument---or, in Transient Mark
-mode, if the region is not active---then it applies to your next
-self-inserting input. @xref{Transient Mark}. Otherwise, the command
+ If you specify a color with a prefix argument---or, in Transient
+Mark mode, if the region is not active---then it applies to any
+immediately following self-inserting input. Otherwise, the command
applies to the region.
Each color menu contains one additional item: @samp{Other}. You can use
this item to specify a color that is not listed in the menu; it reads
-the color name with the minibuffer. To display list of available colors
+the color name with the minibuffer. To display a list of available colors
and their names, use the @samp{Display Colors} menu item in the Text
Properties menu (@pxref{Editing Format Info}).
Any color that you specify in this way, or that is mentioned in a
-formatted text file that you read in, is added to both color menus for
-the duration of the Emacs session.
+formatted text file that you read in, is added to the corresponding
+color menu for the duration of the Emacs session.
@findex facemenu-set-foreground
@findex facemenu-set-background
- There are no key bindings for specifying colors, but you can do so
+ There are no predefined key bindings for specifying colors, but you can do so
with the extended commands @kbd{M-x facemenu-set-foreground} and
@kbd{M-x facemenu-set-background}. Both of these commands read the name
of the color with the minibuffer.
You can use these commands repeatedly to increase or decrease the
indentation.
- The most common way to use these commands is to change the indentation
-of an entire paragraph. However, that is not the only use. You can
-change the margins at any point; the new values take effect at the end
-of the line (for right margins) or the beginning of the next line (for
-left margins).
+ The most common way to use them is to change the indentation of an
+entire paragraph. For other uses, the effects of refilling can be
+hard to predict, except in some special cases like the one described
+next.
- This makes it possible to format paragraphs with @dfn{hanging indents},
-which means that the first line is indented less than subsequent lines.
-To set up a hanging indent, increase the indentation of the region
-starting after the first word of the paragraph and running until the end
-of the paragraph.
+ The most common other use is to format paragraphs with @dfn{hanging
+indents}, which means that the first line is indented less than
+subsequent lines. To set up a hanging indent, increase the
+indentation of the region starting after the first word of the
+paragraph and running until the end of the paragraph.
Indenting the first line of a paragraph is easier. Set the margin for
the whole paragraph where you want it to be for the body of the
paragraph, then indent the first line by inserting extra spaces or tabs.
- Sometimes, as a result of editing, the filling of a paragraph becomes
-messed up---parts of the paragraph may extend past the left or right
-margins. When this happens, use @kbd{M-q} (@code{fill-paragraph}) to
-refill the paragraph.
-
@vindex standard-indent
The variable @code{standard-indent} specifies how many columns these
commands should add to or subtract from the indentation. The default
value is 4. The overall default right margin for Enriched mode is
controlled by the variable @code{fill-column}, as usual.
+@kindex C-c [ @r{(Enriched mode)}
+@kindex C-c ] @r{(Enriched mode)}
+@findex set-left-margin
+@findex set-right-margin
+ There are also two commands for setting the left or right margin of
+the region absolutely: @code{set-left-margin} and
+@code{set-right-margin}. Enriched mode binds these commands to
+@kbd{C-c [} and @kbd{C-c ]}, respectively. You can specify the
+margin width either with a numeric argument or in the minibuffer.
+
+ Sometimes, as a result of editing, the filling of a paragraph becomes
+messed up---parts of the paragraph may extend past the left or right
+margins. When this happens, use @kbd{M-q} (@code{fill-paragraph}) to
+refill the paragraph.
+
The fill prefix, if any, works in addition to the specified paragraph
indentation: @kbd{C-x .} does not include the specified indentation's
whitespace in the new value for the fill prefix, and the fill commands
@node Format Justification
@subsection Justification in Formatted Text
-
+
When editing formatted text, you can specify various styles of
justification for a paragraph. The style you specify automatically
affects the Emacs fill commands.
the style. The submenu contains five items:
@table @code
-@item Flush Left
+@item Left
This is the most common style of justification (at least for English).
Lines are aligned at the left margin but left uneven at the right.
-@item Flush Right
+@item Right
This aligns each line with the right margin. Spaces and tabs are added
on the left, if necessary, to make lines line up on the right.
@item Center
This centers every line between the current margins.
-@item None
+@item Unfilled
This turns off filling entirely. Each line will remain as you wrote it;
the fill and auto-fill functions will have no effect on text which has
this setting. You can, however, still indent the left margin. In
@findex set-justification-right
@item M-j r
Make the region right-filled (@code{set-justification-right}).
-@kindex M-j f @r{(Enriched mode)}
+@kindex M-j b @r{(Enriched mode)}
@findex set-justification-full
-@item M-j f
-Make the region fully-justified (@code{set-justification-full}).
+@item M-j b
+Make the region fully justified (@code{set-justification-full}).
@kindex M-j c @r{(Enriched mode)}
@kindex M-S @r{(Enriched mode)}
@findex set-justification-center
The default justification style is specified by the variable
@code{default-justification}. Its value should be one of the symbols
@code{left}, @code{right}, @code{full}, @code{center}, or @code{none}.
-
+This is a per-buffer variable. Setting the variable directly affects
+only the current buffer. However, customizing it in a Custom buffer
+sets (as always) the default value for buffers that do not override it.
+@xref{Locals}, and @ref{Easy Customization}.
+
@node Format Properties
@subsection Setting Other Text Properties
- The Other Properties menu lets you add or remove three other useful text
+ The Special Properties menu lets you add or remove three other useful text
properties: @code{read-only}, @code{invisible} and @code{intangible}.
The @code{intangible} property disallows moving point within the text,
the @code{invisible} text property hides text from display, and the
Normally, Emacs knows when you are editing formatted text because it
recognizes the special annotations used in the file that you visited.
-However, there are situations in which you must take special actions
-to convert file contents or turn on Enriched mode:
+However, sometimes you must take special actions to convert file
+contents or turn on Enriched mode:
@itemize @bullet
@item
not recognize the file as being in the text/enriched format. In this
case, when you visit the file you will see the formatting commands
rather than the formatted text. Type @kbd{M-x format-decode-buffer} to
-translate it.
+translate it. This also automatically turns on Enriched mode.
@item
-When you @emph{insert} a file into a buffer, rather than visiting it.
+When you @emph{insert} a file into a buffer, rather than visiting it,
Emacs does the necessary conversions on the text which you insert, but
it does not enable Enriched mode. If you wish to do that, type @kbd{M-x
enriched-mode}.
-@end itemize
+@end itemize
The command @code{format-decode-buffer} translates text in various
formats into Emacs's internal format. It asks you to specify the format
tells Emacs to guess the format.
@findex format-find-file
- If you wish to look at text/enriched file in its raw form, as a
+ If you wish to look at a text/enriched file in its raw form, as a
sequence of characters rather than as formatted text, use the @kbd{M-x
find-file-literally} command. This visits a file, like
@code{find-file}, but does not do format conversion. It also inhibits
but allow character code conversion and/or automatic uncompression if
appropriate, use @code{format-find-file} with suitable arguments.
+@node Text Based Tables
+@section Editing Text-based Tables
+@cindex table mode
+@cindex text-based tables
+
+ Table mode provides an easy and intuitive way to create and edit WYSIWYG
+text-based tables. Here is an example of such a table:
+
+@smallexample
+@group
++-----------------+--------------------------------+-----------------+
+| Command | Description | Key Binding |
++-----------------+--------------------------------+-----------------+
+| forward-char |Move point right N characters | C-f |
+| |(left if N is negative). | |
+| | | |
+| |On reaching end of buffer, stop | |
+| |and signal error. | |
++-----------------+--------------------------------+-----------------+
+| backward-char |Move point left N characters | C-b |
+| |(right if N is negative). | |
+| | | |
+| |On attempt to pass beginning or | |
+| |end of buffer, stop and signal | |
+| |error. | |
++-----------------+--------------------------------+-----------------+
+@end group
+@end smallexample
+
+ Table mode allows the contents of the table such as this one to be
+easily manipulated by inserting or deleting characters inside a cell.
+A cell is effectively a localized rectangular edit region and edits to
+a cell do not affect the contents of the surrounding cells. If the
+contents do not fit into a cell, then the cell is automatically
+expanded in the vertical and/or horizontal directions and the rest of
+the table is restructured and reformatted in accordance with the
+growth of the cell.
+
+@menu
+* Table Definition:: What is a text based table.
+* Table Creation:: How to create a table.
+* Table Recognition:: How to activate and deactivate tables.
+* Cell Commands:: Cell-oriented commands in a table.
+* Cell Justification:: Justifying cell contents.
+* Row Commands:: Manipulating rows of table cell.
+* Column Commands:: Manipulating columns of table cell.
+* Fixed Width Mode:: Fixing cell width.
+* Table Conversion:: Converting between plain text and tables.
+* Measuring Tables:: Analyzing table dimension.
+* Table Misc:: Table miscellany.
+@end menu
+
+@node Table Definition
+@subsection What is a Text-based Table?
+
+ Keep the following examples of valid tables in mind as a reference
+while you read this section:
+
+@example
+ +--+----+---+ +-+ +--+-----+
+ | | | | | | | | |
+ +--+----+---+ +-+ | +--+--+
+ | | | | | | | |
+ +--+----+---+ +--+--+ |
+ | | |
+ +-----+--+
+@end example
+
+ A table consists of a rectangular frame whose inside is divided into
+cells. Each cell must be at least one character wide and one
+character high, not counting its border lines. A cell can be
+subdivided into multiple rectangular cells, but cells cannot overlap.
+
+ The table frame and cell border lines are made of three special
+characters. These variables specify those characters:
+
+@table @code
+@vindex table-cell-vertical-char
+@item table-cell-vertical-char
+Holds the character used for vertical lines. The default value is
+@samp{|}.
+
+@vindex table-cell-horizontal-char
+@item table-cell-horizontal-char
+Holds the character used for horizontal lines. The default value is
+@samp{-}.
+
+@vindex table-cell-intersection-char
+@item table-cell-intersection-char
+Holds the character used at where horizontal line and vertical line
+meet. The default value is @samp{+}.
+@end table
+
+@noindent
+Based on this definition, the following five tables are examples of invalid
+tables:
+
+@example
+ +-----+ +-----+ +--+ +-++--+ ++
+ | | | | | | | || | ++
+ | +-+ | | | | | | || |
+ | | | | +--+ | +--+--+ +-++--+
+ | +-+ | | | | | | | +-++--+
+ | | | | | | | | | || |
+ +-----+ +--+--+ +--+--+ +-++--+
+ a b c d e
+@end example
+
+From left to right:
+
+@enumerate a
+@item
+Overlapped cells or non-rectangular cells are not allowed.
+@item
+Same as a.
+@item
+The border must be rectangular.
+@item
+Cells must have a minimum width/height of one character.
+@item
+Same as d.
+@end enumerate
+
+@node Table Creation
+@subsection How to Create a Table?
+@cindex create a text-based table
+@cindex table creation
+
+@findex table-insert
+ The command to create a table is @code{table-insert}. When called
+interactively, it asks for the number of columns, number of rows, cell
+width and cell height. The number of columns is the number of cells
+horizontally side by side. The number of rows is the number of cells
+vertically within the table's height. The cell width is a number of
+characters that each cell holds, left to right. The cell height is a
+number of lines each cell holds. The cell width and the cell height
+can be either an integer (when the value is constant across the table)
+or a series of integer, separated by spaces or commas, where each
+number corresponds to the next cell within a row from left to right,
+or the next cell within a column from top to bottom.
+
+@node Table Recognition
+@subsection Table Recognition
+@cindex table recognition
+
+@findex table-recognize
+@findex table-unrecognize
+ Table mode maintains special text properties in the buffer to allow
+editing in a convenient fashion. When a buffer with tables is saved
+to its file, these text properties are lost, so when you visit this
+file again later, Emacs does not see a table, but just formatted text.
+To resurrect the table text properties, issue the @kbd{M-x
+table-recognize} command. It scans the current buffer, recognizes
+valid table cells, and attaches appropriate text properties to allow
+for table editing. The converse command, @code{table-unrecognize}, is
+used to remove the special text properties and convert the buffer back
+to plain text.
+
+ Special commands exist to enable or disable tables within a region,
+enable or disable individual tables, and enable/disable individual
+cells. These commands are:
+
+@table @kbd
+@findex table-recognize-region
+@item M-x table-recognize-region
+Recognize tables within the current region and activate them.
+@findex table-unrecognize-region
+@item M-x table-unrecognize-region
+Deactivate tables within the current region.
+@findex table-recognize-table
+@item M-x table-recognize-table
+Recognize the table under point and activate it.
+@findex table-unrecognize-table
+@item M-x table-unrecognize-table
+Deactivate the table under point.
+@findex table-recognize-cell
+@item M-x table-recognize-cell
+Recognize the cell under point and activate it.
+@findex table-unrecognize-cell
+@item M-x table-unrecognize-cell
+Deactivate the cell under point.
+@end table
+
+ For another way of converting text into tables, see @ref{Table
+Conversion}.
+
+@node Cell Commands
+@subsection Commands for Table Cells
+
+@findex table-forward-cell
+@findex table-backward-cell
+ The commands @code{table-forward-cell} and
+@code{table-backward-cell} move point from the current cell to an
+adjacent cell forward and backward respectively. The order of the
+cells is cyclic: when point is in the last cell of a table, typing
+@kbd{M-x table-forward-cell} moves to the first cell in the table.
+Likewise @kbd{M-x table-backward-cell} from the first cell in a table
+moves to the last cell.
+
+@findex table-span-cell
+ The command @code{table-span-cell} merges the current cell with the
+adjacent cell in a specified direction---right, left, above or below.
+You specify the direction with the minibuffer. It does not allow
+merges which don't result in a legitimate cell layout.
+
+@findex table-split-cell
+@cindex text-based tables, split a cell
+@cindex split table cell
+ The command @code{table-split-cell} splits the current cell
+vertically or horizontally. This command is a wrapper to the
+direction specific commands @code{table-split-cell-vertically} and
+@code{table-split-cell-horizontally}. You specify the direction with
+a minibuffer argument.
+
+@findex table-split-cell-vertically
+ The command @code{table-split-cell-vertically} splits the current
+cell vertically and creates a pair of cells above and below where
+point is located. The content in the original cell is split as well.
+
+@findex table-split-cell-horizontally
+ The command @code{table-split-cell-horizontally} splits the current
+cell horizontally and creates a pair of cells right and left of where
+point is located. If the cell being split is not empty, this asks you
+how to handle the cell contents. The three options are: @code{split},
+@code{left}, or @code{right}. @code{split} splits the contents at
+point literally, while the @code{left} and @code{right} options move
+the entire contents into the left or right cell respectively.
+
+@cindex enlarge a table cell
+@cindex shrink a table cell
+ The next four commands enlarge or shrink a cell. They use numeric
+arguments (@pxref{Arguments}) to specify how many columns or rows to
+enlarge or shrink a particular table.
+
+@table @kbd
+@findex table-heighten-cell
+@item M-x table-heighten-cell
+Enlarge the current cell vertically.
+@findex table-shorten-cell
+@item M-x table-shorten-cell
+Shrink the current cell vertically.
+@findex table-widen-cell
+@item M-x table-widen-cell
+Enlarge the current cell horizontally.
+@findex table-narrow-cell
+@item M-x table-narrow-cell
+Shrink the current cell horizontally.
+@end table
+
+@node Cell Justification
+@subsection Cell Justification
+@cindex cell text justification
+
+ You can specify text justification for each cell. The justification
+is remembered independently for each cell and the subsequent editing
+of cell contents is subject to the specified justification.
+
+@findex table-justify
+ The command @code{table-justify} ask you to specify what to justify:
+a cell, a column, or a row. If you select cell justification, this
+command sets the justification only for the current cell. Selecting
+column or row justification sets the justification for all the cells
+within a column or row respectively. The command then ask you which
+kind of justification to apply: @code{left}, @code{center},
+@code{right}, @code{top}, @code{middle}, @code{bottom}, or
+@code{none}. Horizontal justification and vertical justification are
+specified independently. The options @code{left}, @code{center}, and
+@code{right} specify horizontal justification while the options
+@code{top}, @code{middle}, @code{bottom}, and @code{none} specify
+vertical justification. The vertical justification @code{none}
+effectively removes vertical justification. Horizontal justification
+must be one of @code{left}, @code{center}, or @code{right}.
+
+@vindex table-detect-cell-alignment
+ Justification information is stored in the buffer as a part of text
+property. Therefore, this information is ephemeral and does not
+survive through the loss of the buffer (closing the buffer and
+revisiting the buffer erase any previous text properties). To
+countermand for this, the command @code{table-recognize} and other
+recognition commands (@pxref{Table Recognition}) are equipped with a
+convenience feature (turned on by default). During table recognition,
+the contents of a cell are examined to determine which justification
+was originally applied to the cell and then applies this justification
+to the cell. This is a speculative algorithm and is therefore not
+perfect, however, the justification is deduced correctly most of the
+time. To disable this feature, customize the variable
+@code{table-detect-cell-alignment} and set it to @code{nil}.
+
+@node Row Commands
+@subsection Commands for Table Rows
+@cindex table row commands
+
+@cindex insert row in table
+@findex table-insert-row
+ The command @code{table-insert-row} inserts a row of cells before
+the current row in a table. The current row where point is located is
+pushed down after the newly inserted row. A numeric prefix argument
+specifies the number of rows to insert. Note that in order to insert
+rows @emph{after} the last row at the bottom of a table, you must
+place point below the table---that is, outside the table---prior to
+invoking this command.
+
+@cindex delete row in table
+@findex table-delete-row
+ The command @code{table-delete-row} deletes a row of cells at point.
+A numeric prefix argument specifies the number of rows to delete.
+
+@node Column Commands
+@subsection Commands for Table Columns
+@cindex table column commands
+
+@cindex insert column in table
+@findex table-insert-column
+ The command @code{table-insert-column} inserts a column of cells to
+the left of the current row in a table. This pushes the current
+column to the right. To insert a column to the right side of the
+rightmost column, place point to the right of the rightmost column,
+which is outside of the table, prior to invoking this command. A
+numeric prefix argument specifies the number of columns to insert.
+
+@cindex delete column in table
+ A command @code{table-delete-column} deletes a column of cells at
+point. A numeric prefix argument specifies the number of columns to
+delete.
+
+@node Fixed Width Mode
+@subsection Fix Width of Cells
+@cindex fix width of table cells
+
+@findex table-fixed-width-mode
+ The command @code{table-fixed-width-mode} toggles fixed width mode
+on and off. When fixed width mode is turned on, editing inside a
+cell never changes the cell width; when it is off, the cell width
+expands automatically in order to prevent a word from being folded
+into multiple lines. By default, fixed width mode is disabled.
+
+@node Table Conversion
+@subsection Conversion Between Plain Text and Tables
+@cindex text to table
+@cindex table to text
+
+@findex table-capture
+ The command @code{table-capture} captures plain text in a region and
+turns it into a table. Unlike @code{table-recognize} (@pxref{Table
+Recognition}), the original text does not have a table appearance but
+may hold a logical table structure. For example, some elements
+separated by known patterns form a two dimensional structure which can
+be turned into a table.
+
+ Here's an example of data that @code{table-capture} can operate on.
+The numbers are horizontally separated by a comma and vertically
+separated by a newline character.
+
+@example
+1, 2, 3, 4
+5, 6, 7, 8
+, 9, 10
+@end example
+
+@noindent
+Invoking @kbd{M-x table-capture} on that text produces this table:
+
+@example
++-----+-----+-----+-----+
+|1 |2 |3 |4 |
++-----+-----+-----+-----+
+|5 |6 |7 |8 |
++-----+-----+-----+-----+
+| |9 |10 | |
++-----+-----+-----+-----+
+@end example
+
+@noindent
+The conversion uses @samp{,} for the column delimiter and newline for
+a row delimiter, cells are left justified, and minimum cell width is
+5.
+
+@findex table-release
+ The command @code{table-release} does the opposite of
+@code{table-capture}. It releases a table by removing the table frame
+and cell borders. This leaves the table contents as plain text. One
+of the useful applications of @code{table-capture} and
+@code{table-release} is to edit a text in layout. Look at the
+following three paragraphs (the latter two are indented with header
+lines):
+
+@example
+@samp{table-capture} is a powerful command, but mastering its
+power requires some practice. Here are some things it can do:
+
+Parse Cell Items By using column delimiter regular
+ expression and raw delimiter regular
+ expression, it parses the specified text
+ area and extracts cell items from
+ non-table text and then forms a table out
+ of them.
+
+Capture Text Area When no delimiters are specified it
+ creates a single cell table. The text in
+ the specified region is placed in that
+ cell.
+@end example
+
+@noindent
+Applying @code{table-capture} to a region containing the above three
+paragraphs, with empty strings for column delimiter regexp and row
+delimiter regexp, creates a table with a single cell like the
+following one.
+
+@c The first line's right-hand frame in the following two examples
+@c sticks out to accommodate for the removal of @samp in the
+@c produced output!!
+@smallexample
+@group
++-----------------------------------------------------------------+
+|@samp{table-capture} is a powerful command, but mastering its |
+|power requires some practice. Here are some things it can do: |
+| |
+|Parse Cell Items By using column delimiter regular |
+| expression and raw delimiter regular |
+| expression, it parses the specified text |
+| area and extracts cell items from |
+| non-table text and then forms a table out |
+| of them. |
+| |
+|Capture Text Area When no delimiters are specified it |
+| creates a single cell table. The text in |
+| the specified region is placed in that |
+| cell. |
++-----------------------------------------------------------------+
+@end group
+@end smallexample
+
+@noindent
+By splitting the cell appropriately we now have a table consisting of
+paragraphs occupying its own cell. Each cell can now be edited
+independently without affecting the layout of other cells.
+
+@smallexample
++-----------------------------------------------------------------+
+|@samp{table-capture} is a powerful command, but mastering its |
+|power requires some practice. Here are some things it can do: |
++---------------------+-------------------------------------------+
+|Parse Cell Items |By using column delimiter regular |
+| |expression and raw delimiter regular |
+| |expression, it parses the specified text |
+| |area and extracts cell items from |
+| |non-table text and then forms a table out |
+| |of them. |
++---------------------+-------------------------------------------+
+|Capture Text Area |When no delimiters are specified it |
+| |creates a single cell table. The text in |
+| |the specified region is placed in that |
+| |cell. |
++---------------------+-------------------------------------------+
+@end smallexample
+
+@noindent
+By applying @code{table-release}, which does the opposite process, the
+contents become once again plain text. @code{table-release} works as
+a companion command to @code{table-capture}.
+
+@node Measuring Tables
+@subsection Analyzing Table Dimensions
+@cindex table dimensions
+
+@findex table-query-dimension
+ The command @code{table-query-dimension} analyzes a table structure
+and reports information regarding its dimensions. In case of the
+above example table, the @code{table-query-dimension} command displays
+in echo area:
+
+@smallexample
+Cell: (21w, 6h), Table: (67w, 16h), Dim: (2c, 3r), Total Cells: 5
+@end smallexample
+
+@noindent
+This indicates that the current cell is 21 character wide and 6 lines
+high, the entire table is 67 characters wide and 16 lines high. The
+table has 2 columns and 3 rows. It has a total of 5 cells, since the
+first row has a spanned cell.
+
+@node Table Misc
+@subsection Table Miscellany
+
+@cindex insert string into table cells
+@findex table-insert-sequence
+ The command @code{table-insert-sequence} inserts a string into each
+cell. Each string is a part of a sequence i.e.@: a series of
+increasing integer numbers.
+
+@cindex table in language format
+@cindex table for HTML and LaTeX
+@findex table-generate-source
+ The command @code{table-generate-source} generates a table formatted
+for a specific markup language. It asks for a language (which must be
+one of @code{html}, @code{latex}, or @code{cals}), a destination
+buffer where to put the result, and the table caption (a string), and
+then inserts the generated table in the proper syntax into the
+destination buffer. The default destination buffer is
+@code{table.@var{lang}}, where @var{lang} is the language you
+specified.
+
+@ignore
+ arch-tag: 8db54ed8-2036-49ca-b0df-23811d03dc70
+@end ignore