#
# make extraclean
# Still more severe - delete backup and autosave files, too.
+# Also generated files that do not normally change and can be slow
+# to rebuild (eg leim/ja-dic).
#
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
+abs_srcdir=@abs_srcdir@
+# MinGW CPPFLAGS may use this.
+abs_top_srcdir=@abs_top_srcdir@
# Where the manpage source files are kept.
mansrcdir=$(srcdir)/doc/man
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-# Where to install the lisp, leim files distributed with
-# Emacs. This includes the Emacs version, so that the
-# lisp files for different versions of Emacs will install
-# themselves in separate directories.
+# Where to install the lisp files distributed with Emacs.
+# This includes the Emacs version, so that the lisp files for different
+# versions of Emacs will install themselves in separate directories.
lispdir=@lispdir@
-leimdir=@leimdir@
# Directories Emacs should search for standard lisp files.
-# The default is ${lispdir}:${leimdir}.
+# The default is ${lispdir}.
standardlisppath=@standardlisppath@
# Directories Emacs should search for lisp files specific to this
# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
-# Where Emacs will search for its lisp files while
-# building. This is only used during the process of
-# compiling Emacs, to help Emacs find its lisp files
-# before they've been installed in their final location.
+# Where Emacs will search for its lisp files while building.
+# This is only used during the process of compiling Emacs,
+# to help Emacs find its lisp files before they've been installed
+# in their final location.
# This should be a colon-separated list of directories.
# Normally it points to the lisp/ directory in the sources.
-buildlisppath=${srcdir}/lisp
+# NB lread.c relies on lisp/ being first here.
+buildlisppath=${abs_srcdir}/lisp
# Where to install the other architecture-independent
# data files distributed with Emacs (like the tutorial,
EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
-SUBDIR = $(NTDIR) lib lib-src src lisp leim
+SUBDIR = $(NTDIR) lib lib-src src lisp
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
# Subdirectories to install, and where they'll go. lib-src's and nt's
# makefiles know how to install them, so we don't do that here.
# Directories that cannot simply be copied, eg info, are treated
-# separately. quail appears twice because in out-of-tree builds, it
-# exists twice.
-COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
-COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
+# separately.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}"
all: ${SUBDIR}
-e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-# Convert MSYS-style /x/foo or Windows-style x:\foo file names
-# into x:/foo that Windows can grok.
-msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
-
-# Transform directory search path and its components. Original can
-# be MSYS or Windows style. Set path separator to ";", directory
-# separator to "/" and transform MSYS-style "/c/" to "c:/".
-# Remove empty path components and escape semicolons.
-msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
- -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
- -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
- -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
-
-# Replace "${prefix}" with '%emacs_dir%' (which expands to install
+# Replace "${w32prefix}" with '%emacs_dir%' (which expands to install
# directory at runtime).
-msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
+msys_w32prefix_subst=sed -e 's!\(^\|;\)'"$${w32prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
# Quote Sed special characters (except backslash and newline) with
# a double backslash.
# The w32 build needs a slightly different editing, and it uses
# nt/epaths.nt as the template.
+#
# Use the value of ${locallisppath} supplied by `configure',
# to support the --enable-locallisppath argument.
+#
+# In this case, the paths written to 'src/epaths.h' must be in native
+# MS-Windows format (e.g. 'c:/foo/bar'), because temacs is a MinGW
+# program that doesn't support MSYS-style paths (e.g. '/c/foo/bar' or
+# '/foo/bar').
epaths-force-w32: FRC
- @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ; \
- prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
- locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
+ @(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${srcdir}"`; \
+ w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}" N`; \
+ w32prefixpattern=`echo "$${w32prefix}" | ${msys_sed_sh_escape}` ; \
+ w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}" N ":" "\\;" | ${msys_w32prefix_subst}` ; \
sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
- -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath}"'";' \
-e '/^.*#/s/@VER@/${version}/g' \
-e '/^.*#/s/@CFG@/${configuration}/g' \
-e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
src: lib-src
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
-# and `leim'.
-lisp leim: src
+# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
+lisp: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp leim nt: Makefile FRC
+lib lib-src lisp nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
$(srcdir)/configure: $(AUTOCONF_INPUTS)
cd ${srcdir} && autoconf
-ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
+ACLOCAL_INPUTS = $(srcdir)/configure.ac $(srcdir)/m4/gnulib-comp.m4
$(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
cd $(srcdir) && aclocal -I m4
## world-readable.
## TODO it might be good to warn about non-standard permissions of
## pre-existing directories, but that does not seem easy.
-write_subdir=if [ -f $${subdir}/subdirs.el ]; \
+write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \
then true; \
else \
umask 022; \
- ${MKDIR_P} $${subdir}; \
+ ${MKDIR_P} "$${subdir}"; \
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $${subdir}/subdirs.el; \
+ > "$${subdir}/subdirs.el"; \
fi
### Install the executables that were compiled specifically for this machine.
### We do install-arch-indep first because the executable needs the
### Lisp files and DOC file to work properly.
install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
- umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
+ umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
cd lib-src && \
- $(MAKE) install $(MFLAGS) prefix=${prefix} \
- exec_prefix=${exec_prefix} bindir=${bindir} \
- libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ $(MAKE) install $(MFLAGS) prefix="${prefix}" \
+ exec_prefix="${exec_prefix}" bindir="${bindir}" \
+ libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
INSTALL_STRIP=${INSTALL_STRIP}
if test "${ns_self_contained}" = "no"; then \
- ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
- chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \
+ chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \
if test "x${NO_BIN_LINK}" = x; then \
- rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
- cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
+ rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \
+ cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
fi; \
else \
subdir=${ns_appresdir}/site-lisp; \
install-:
install-nt:
cd $(NTDIR) && \
- $(MAKE) install $(MFLAGS) prefix=${prefix} \
- exec_prefix=${exec_prefix} bindir=${bindir} \
- libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ $(MAKE) install $(MFLAGS) prefix="${prefix}" \
+ exec_prefix="${exec_prefix}" bindir="${bindir}" \
+ libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
INSTALL_STRIP=${INSTALL_STRIP}
## In the share directory, we are deleting:
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-## We used to create locallisppath, but if it points to non-standard
-## locations, is not really Emacs's job to create these directories,
-## so it is no longer done.
+## We always create the _default_ locallisppath directories, and
+## ensure that they contain a subdirs.el file (via write_subdir).
+## This is true even if locallisppath has a non-default value.
+## In case of non-default value, we used to create the specified directories,
+## but not add subdirs.el to them. This was a strange halfway house.
+## Nowadays we do not create non-default directories.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
-install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
+install-arch-indep: lisp install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
[ -d $${dir} ] || exit 1 ; \
- dest=$$1 ; shift ; \
- [ -d $${dest} ] && \
- [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
- continue ; \
- if [ "$${dir}" = "leim/quail" ]; then \
- [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
- continue ; \
- else \
- rm -rf $${dest} ; \
- umask 022; ${MKDIR_P} $${dest} ; \
- fi ; \
+ dest="$$1" ; shift ; \
+ if [ -d "$${dest}" ]; then \
+ exp_dest=`cd "$${dest}" && /bin/pwd`; \
+ [ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
+ else true; \
+ fi; \
+ rm -rf "$${dest}" ; \
+ umask 022; ${MKDIR_P} "$${dest}" ; \
echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -chf - . ) \
- | (cd $${dest}; umask 022; \
+ | (cd "$${dest}"; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
if [ "$${dir}" = "${srcdir}/etc" ]; then \
- rm -f $${dest}/DOC* ; \
- rm -f $${dest}/refcards/*.aux $${dest}/refcards/*.dvi; \
- rm -f $${dest}/refcards/*.log; \
+ rm -f "$${dest}/DOC"* ; \
+ rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \
+ rm -f "$${dest}/refcards"/*.log; \
else true; \
fi; \
- for subdir in `find $${dest} -type d -print` ; do \
- chmod a+rx $${subdir} ; \
- rm -f $${subdir}/.gitignore ; \
- rm -f $${subdir}/.arch-inventory ; \
- rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- rm -f $${subdir}/ChangeLog* ; \
- [ "$${dir}" != "${srcdir}/etc" ] && \
- rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
- done ; \
- find $${dest} -exec chown $${installuser} {} ';' ;\
+ (cd "$${dest}" || exit 1; \
+ for subdir in `find . -type d -print` ; do \
+ chmod a+rx $${subdir} ; \
+ rm -f $${subdir}/.gitignore ; \
+ rm -f $${subdir}/.arch-inventory ; \
+ rm -f $${subdir}/.DS_Store ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ [ "$${dir}" != "${srcdir}/etc" ] && \
+ rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
+ done ); \
+ find "$${dest}" -exec chown $${installuser} {} ';' ;\
done
- -rm -f $(DESTDIR)${leimdir}/leim-list.el
- ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
- -rm -f $(DESTDIR)${lispdir}/subdirs.el
- umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
- subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
+ -rm -f "$(DESTDIR)${lispdir}/subdirs.el"
+ umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
+ subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
${write_subdir}
- subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
+ subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
${write_subdir} || true
[ -z "${GZIP_PROG}" ] || \
( echo "Compressing *.el ..." ; \
unset CDPATH; \
thisdir=`/bin/pwd`; \
- for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
- cd $${thisdir} ; \
- cd $${dir} || exit 1 ; \
+ for dir in "$(DESTDIR)${lispdir}"; do \
+ cd "$${thisdir}" ; \
+ cd "$${dir}" || exit 1 ; \
for f in `find . -name "*.elc" -print`; do \
- ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
+ f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \
+ ${GZIP_PROG} -9n "$$f_el" ; \
done ; \
done )
- -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+ -chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
## The above chmods are needed because "umask 022; tar ..." is not
## guaranteed to do the right thing; eg if we are root and tar is
## installed etc/ directory, so we need it to run before this does.
install-etcdoc: src install-arch-indep
-unset CDPATH; \
- umask 022; ${MKDIR_P} $(DESTDIR)${etcdocdir} ; \
- if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${etcdocdir}; /bin/pwd` ]; \
+ umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
+ exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \
+ if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
then \
docfile="DOC"; \
echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
- ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${etcdocdir}/$${docfile}; \
+ ${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
$(set_installuser); \
- chown $${installuser} $(DESTDIR)${etcdocdir}/$${docfile} || true ; \
+ chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
else true; fi
install-info: info
- umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
+ umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
-unset CDPATH; \
thisdir=`/bin/pwd`; \
- [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
- (cd $(DESTDIR)${infodir}; \
+ exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \
+ if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
+ true; \
+ else \
+ (cd "$(DESTDIR)${infodir}"; \
[ -f dir ] || \
- (cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
- info_misc=`cd $${thisdir}/doc/misc && \
- $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
- `; \
+ (cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \
+ info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
- (cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
+ (cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \
[ -n "${GZIP_PROG}" ] || continue ; \
- rm -f $(DESTDIR)${infodir}/$$f.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
+ rm -f "$(DESTDIR)${infodir}/$$f.gz"; \
+ ${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \
done; \
- (cd $${thisdir}; \
- ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- done)
+ (cd "$${thisdir}"; \
+ ${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
+ done; \
+ fi
## "gzip || true" is because some gzips exit with non-zero status
## if compression would not reduce the file size. Eg, the gzip in
## ctags.1 is compressed or not. "gzip -f" is another option here,
## but not sure if portable.
install-man:
- umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
+ umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}"
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
- (cd $${thisdir}; \
- ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
+ (cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
[ -n "${GZIP_PROG}" ] || continue ; \
- rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
+ rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \
+ ${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \
done
## Install those items from etc/ that need to end up elsewhere.
EMACS_ICON=emacs
install-etc:
- umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
+ umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}"
tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
-e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
${srcdir}/etc/emacs.desktop > $${tmp}; \
- ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
+ ${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \
rm -f $${tmp}
thisdir=`/bin/pwd`; \
cd ${iconsrcdir} || exit 1; umask 022 ; \
for dir in */*/apps */*/mimetypes; do \
[ -d $${dir} ] || continue ; \
- ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
+ ( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \
for icon in $${dir}/${EMACS_ICON}[.-]*; do \
[ -r $${icon} ] || continue ; \
ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
- ( cd $${thisdir}; \
- ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
+ ( cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
|| exit 1; \
done ; \
done
uninstall: uninstall-$(NTDIR) uninstall-doc
cd lib-src && \
$(MAKE) $(MFLAGS) uninstall \
- prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+ prefix="${prefix}" exec_prefix="${exec_prefix}" \
+ bindir="${bindir}" libexecdir="${libexecdir}" \
+ archlibdir="${archlibdir}"
-unset CDPATH; \
- for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
- if [ -d $${dir} ]; then \
- case `cd $${dir} ; /bin/pwd` in \
- `cd ${srcdir} ; /bin/pwd`* ) ;; \
- * ) rm -rf $${dir} ;; \
+ for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do \
+ if [ -d "$${dir}" ]; then \
+ case `cd "$${dir}" ; /bin/pwd` in \
+ "`cd ${srcdir} ; /bin/pwd`"* ) ;; \
+ * ) rm -rf "$${dir}" ;; \
esac ; \
- case $${dir} in \
- $(DESTDIR)${datadir}/emacs/${version}/* ) \
- rm -rf $(DESTDIR)${datadir}/emacs/${version} \
+ case "$${dir}" in \
+ "$(DESTDIR)${datadir}/emacs/${version}"/* ) \
+ rm -rf "$(DESTDIR)${datadir}/emacs/${version}" \
;; \
esac ; \
fi ; \
done
- -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
+ -rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}"
thisdir=`/bin/pwd`; \
(info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
- if cd $(DESTDIR)${infodir}; then \
+ if cd "$(DESTDIR)${infodir}"; then \
for elt in ${INFO_NONMISC} $${info_misc}; do \
- (cd $${thisdir}; \
- $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
+ (cd "$${thisdir}"; \
+ $(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
if [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
ext=.gz; else ext=; fi; \
if cd ${mansrcdir}; then \
for page in *.1; do \
- rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
+ rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
fi)
- (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
- (if cd $(DESTDIR)${icondir}; then \
+ (cd "$(DESTDIR)${bindir}" && rm -f $(EMACSFULL) $(EMACS) || true)
+ (if cd "$(DESTDIR)${icondir}"; then \
rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
hicolor/scalable/apps/${EMACS_NAME}.svg \
hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
fi)
- -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
+ -rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"
for file in snake-scores tetris-scores; do \
- file=$(DESTDIR)${gamedir}/$${file}; \
- [ -s $${file} ] || rm -f $$file; \
+ file="$(DESTDIR)${gamedir}/$${file}"; \
+ [ -s "$${file}" ] || rm -f "$$file"; \
done
### Windows-specific uninstall target for removing programs produced
uninstall-nt:
cd $(NTDIR) && \
$(MAKE) $(MFLAGS) uninstall \
- prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+ prefix="${prefix}" exec_prefix="${exec_prefix}" \
+ bindir="${bindir}" libexecdir="${libexecdir}" \
+ archlibdir="${archlibdir}"
FRC:
-cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
- cd leim && $(MAKE) $(MFLAGS) mostlyclean
### `clean'
### Delete all files from the current directory that are normally
-cd doc/misc && $(MAKE) $(MFLAGS) clean
-cd doc/lispref && $(MAKE) $(MFLAGS) clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) clean
- cd leim && $(MAKE) $(MFLAGS) clean
cd nextstep && $(MAKE) $(MFLAGS) clean
### `bootclean'
cd leim && $(MAKE) $(MFLAGS) distclean
cd lisp && $(MAKE) $(MFLAGS) distclean
cd nextstep && $(MAKE) $(MFLAGS) distclean
- [ ! -d test/automated ] || { \
- cd test/automated && $(MAKE) $(MFLAGS) distclean; \
- }
+ for dir in test/automated admin/grammars admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \
+ done
${top_distclean}
### `bootstrap-clean'
-cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
- cd leim && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) bootstrap-clean
cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
- [ ! -d test/automated ] || { \
- cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
- }
+ for dir in test/automated admin/grammars admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \
+ done
[ ! -f config.log ] || mv -f config.log config.log~
${top_bootclean}
rm -fr autom4te.cache
maintainer-clean: bootstrap-clean FRC
cd src && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) maintainer-clean
cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
- [ ! -d test/automated ] || { \
- cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
- }
+ for dir in test/automated admin/grammars admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \
+ done
${top_maintainer_clean}
### This doesn't actually appear in the coding standards, but Karl
TAGS tags: lib lib-src src
cd src; $(MAKE) $(MFLAGS) tags
-check:
+check: all
@if test ! -d test/automated; then \
echo "You do not seem to have the test/ directory."; \
echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
# Bootstrapping does the following:
# * Remove files to start from a bootstrap-clean slate.
-# * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
+# * Run autogen.sh.
# * Rebuild Makefile, to update the build procedure itself.
# * Do the actual build.
bootstrap: bootstrap-clean FRC
- cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
+ cd $(srcdir) && ./autogen.sh
$(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) $(MFLAGS) info all
echo "You must build Emacs to use this command"; \
exit 1; \
fi
- cd leim && $(MAKE) $(MFLAGS) $@
cd lisp && $(MAKE) $(MFLAGS) $@