# by building, but normally aren't because the distribution comes
# with them.
#
-# Delete `.dvi' files here if they are not part of the distribution.
+# Delete '.dvi' files here if they are not part of the distribution.
#
# make distclean
# Delete all files from the current directory that are created by
# configuring or building the program. If you have unpacked the
# source and built the program without creating any other files,
-# `make distclean' should leave only the files that were in the
+# 'make distclean' should leave only the files that were in the
# distribution.
#
# make maintainer-clean
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
-# ==================== Things `configure' Might Edit ====================
+# ==================== Things 'configure' Might Edit ====================
cache_file = @cache_file@
CONFIGURE_FLAGS = --cache-file=$(cache_file)
### to install files in.
### This should be the number of the Emacs version we're building,
-### like `18.59' or `19.0'.
+### like '24.5' or '25.0.50'.
version=@version@
### This should be the name of the configuration we're building Emacs
-### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
+### for, like 'x86_64-unknown-linux-gnu' or 'powerpc-ibm-aix7.1.2.0'.
configuration=@configuration@
### The nt/ subdirectory gets built only for MinGW
# not need to change them. This defaults to /usr/local.
prefix=@prefix@
-# Like `prefix', but used for architecture-specific files.
+# Like 'prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
-# set by the configure script's `--srcdir' option.
+# set by the configure script's '--srcdir' option.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
-SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
+SUBDIR_MAKEFILES = $(patsubst ${srcdir}/%,%,${SUBDIR_MAKEFILES_IN:.in=})
# Subdirectories to install, and where they'll go. lib-src's and nt's
# makefiles know how to install them, so we don't do that here.
${srcdir}/build-aux/move-if-change emacsver.tex.$$$$ \
${srcdir}/etc/refcards/emacsver.tex
-removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
-
-# Generate epaths.h from epaths.in. This target is invoked by `configure'.
+# Generate epaths.h from epaths.in. This target is invoked by 'configure'.
# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
@for dir in '$(abs_srcdir)' '$(lispdir)' '$(archlibdir)'; do \
case $$dir in \
*:*) \
- echo >&2 "Build or installation directory '$$dir'"; \
+ printf >&2 "Build or installation directory '%s'\\n" "$$dir"; \
echo >&2 "cannot contain ':'."; \
exit 1;; \
esac; \
done
- @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
- locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
- buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
- x_default_search_path=`echo ${x_default_search_path}`; \
- gamedir=`echo ${gamedir}`; \
+ @(gamedir='${gamedir}'; \
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
- -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
- -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "${standardlisppath}";' \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "${locallisppath}";' \
+ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "${buildlisppath}";' \
+ -e '/^#define PATH_[^ ]*SEARCH /s/\([":]\):*/\1/g' \
+ -e '/^#define PATH_[^ ]*SEARCH /s/:"/"/' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
# The w32 build needs a slightly different editing, and it uses
# nt/epaths.nt as the template.
#
-# Use the value of ${locallisppath} supplied by `configure',
+# Use the value of ${locallisppath} supplied by 'configure',
# to support the --enable-locallisppath argument.
#
# In this case, the paths written to 'src/epaths.h' must be in native
src: lib-src
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
+# We need to build 'emacs' in 'src' to compile the *.elc files in 'lisp'.
lisp: src
-# These targets should be "${SUBDIR} without `src'".
+# These targets should be "${SUBDIR} without 'src'".
lib lib-src lisp nt: Makefile
$(MAKE) -C $@ all
# etc. to be built without running into similar recursion problems.
MAKEFILE_NAME = Makefile
$(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
- $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
+ $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
MAKE='$(MAKE)' ./config.status
# Don't erase these files if make is interrupted while refreshing them.
install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
$(MAKE) -C lib-src install
- if test "${ns_self_contained}" = "no"; then \
- ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \
- chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \
- if test "x${NO_BIN_LINK}" = x; then \
- rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \
- cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
- fi; \
- else \
- subdir=${ns_appresdir}/site-lisp; \
- ${write_subdir} || exit 1; \
- rm -rf ${ns_appresdir}/share; \
- fi
+ifeq (${ns_self_contained},no)
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)"
+ -chmod 755 "$(DESTDIR)${bindir}/$(EMACSFULL)"
+ifndef NO_BIN_LINK
+ rm -f "$(DESTDIR)${bindir}/$(EMACS)"
+ cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS)
+endif
+else
+ subdir=${ns_appresdir}/site-lisp && ${write_subdir}
+ rm -rf ${ns_appresdir}/share
+endif
### Windows-specific install target for installing programs produced
### in nt/, and its Posix do-nothing shadow.
fi; \
rm -rf "$${dest}" ; \
umask 022; ${MKDIR_P} "$${dest}" ; \
- echo "Copying $${dir} to $${dest}..." ; \
+ printf 'Copying %s to %s...\n' "$$dir" "$$dest" ; \
(cd $${dir}; tar -chf - . ) \
| (cd "$${dest}"; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
rm -f $${subdir}/.gitignore ; \
rm -f $${subdir}/.arch-inventory ; \
rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/#* ; \
+ rm -f $${subdir}/.#* ; \
rm -f $${subdir}/*~ ; \
rm -f $${subdir}/*.orig ; \
rm -f $${subdir}/ChangeLog* ; \
if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
then \
docfile="DOC"; \
- echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
+ printf 'Copying %s to %s ...\n' "etc/$$docfile" \
+ "$(DESTDIR)${etcdocdir}"; \
${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
$(set_installuser); \
chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
for icon in $${dir}/${EMACS_ICON}[.-]*; do \
[ -r $${icon} ] || continue ; \
ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
- dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
+ dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\\.$${ext}\$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
( cd "$${thisdir}"; \
${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
|| exit 1; \
install-strip:
$(MAKE) INSTALL_STRIP=-s install
-### Delete all the installed files that the `install' target would
-### create (but not the noninstalled files such as `make all' would create).
+### Delete all the installed files that the 'install' target would
+### create (but not the noninstalled files such as 'make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall: uninstall-$(NTDIR) uninstall-doc
$$(MAKE) -C $(1) $(2)
endef
-### `mostlyclean'
-### Like `clean', but may refrain from deleting a few files that people
-### normally don't want to recompile. For example, the `mostlyclean'
-### target for GCC does not delete `libgcc.a', because recompiling it
+### 'mostlyclean'
+### Like 'clean', but may refrain from deleting a few files that people
+### normally don't want to recompile. For example, the 'mostlyclean'
+### target for GCC does not delete 'libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean_dirs = src oldXMenu lwlib lib lib-src nt doc/emacs doc/misc \
doc/lispref doc/lispintro
[ ! -d $$dir ] || $(MAKE) -C $$dir mostlyclean; \
done
-### `clean'
+### 'clean'
### Delete all files from the current directory that are normally
### created by building the program. Don't delete the files that
### record the configuration. Also preserve files that could be made
### by building, but normally aren't because the distribution comes
### with them.
###
-### Delete `.dvi' files here if they are not part of the distribution.
+### Delete '.dvi' files here if they are not part of the distribution.
clean_dirs = $(mostlyclean_dirs) nextstep
$(foreach dir,$(clean_dirs),$(eval $(call submake_template,$(dir),clean)))
clean: $(clean_dirs:=_clean)
- for dir in test/automated; do \
+ for dir in test/automated admin/charsets; do \
[ ! -d $$dir ] || $(MAKE) -C $$dir clean; \
done
-rm -f *.tmp etc/*.tmp*
-rm -rf info-dir.*
-### `bootclean'
+### 'bootclean'
### Delete all files that need to be remade for a clean bootstrap.
top_bootclean=\
rm -f config.cache config.log ${srcdir}/doc/man/emacs.1
-### `distclean'
+### 'distclean'
### Delete all files from the current directory that are created by
### configuring or building the program. If you have unpacked the
### source and built the program without creating any other files,
-### `make distclean' should leave only the files that were in the
+### 'make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
${top_bootclean}; \
$(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),distclean)))
+maybeclean_dirs = test/automated admin/grammars admin/unidata admin/charsets
+
distclean: $(distclean_dirs:=_distclean)
- for dir in test/automated admin/grammars admin/unidata; do \
+ for dir in ${maybeclean_dirs}; do \
[ ! -d $$dir ] || $(MAKE) -C $$dir distclean; \
done
${top_distclean}
-### `bootstrap-clean'
-### Delete everything that can be reconstructed by `make' and that
+### 'bootstrap-clean'
+### Delete everything that can be reconstructed by 'make' and that
### needs to be deleted in order to force a bootstrap from a clean state.
$(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),bootstrap-clean)))
bootstrap-clean: $(distclean_dirs:=_bootstrap-clean)
- for dir in test/automated admin/grammars admin/unidata; do \
+ for dir in ${maybeclean_dirs}; do \
[ ! -d $$dir ] || $(MAKE) -C $$dir bootstrap-clean; \
done
[ ! -f config.log ] || mv -f config.log config.log~
rm -f ${srcdir}/etc/refcards/emacsver.tex
${top_bootclean}
-### `maintainer-clean'
+### 'maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
-### One exception, however: `make maintainer-clean' should not delete
-### `configure' even if `configure' can be remade using a rule in the
-### Makefile. More generally, `make maintainer-clean' should not delete
-### anything that needs to exist in order to run `configure' and then
+### One exception, however: 'make maintainer-clean' should not delete
+### 'configure' even if 'configure' can be remade using a rule in the
+### Makefile. More generally, 'make maintainer-clean' should not delete
+### anything that needs to exist in order to run 'configure' and then
### begin to build the program.
top_maintainer_clean=\
${top_distclean}; \
$(foreach dir,$(maintainer_clean_dirs),$(eval $(call submake_template,$(dir),maintainer-clean)))
maintainer-clean: bootstrap-clean $(maintainer_clean_dirs:=_maintainer-clean)
- for dir in test/automated admin/grammars admin/unidata; do \
+ for dir in ${maybeclean_dirs}; do \
[ ! -d $$dir ] || $(MAKE) -C $$dir maintainer-clean; \
done
${top_maintainer_clean}
### it deletes backup and autosave files too.
### Note that we abuse this in some subdirectories (eg leim),
### to delete some generated files that are slow to rebuild.
-$(foreach dir,$(SUBDIR),$(eval $(call submake_template,$(dir),extraclean)))
+extraclean_dirs = ${NTDIR} lib-src src leim \
+ admin/charsets admin/grammars admin/unidata
-## FIXME this is busted because most of these do not have extraclean rules.
-extraclean: $(SUBDIR:=_extraclean)
+$(foreach dir,$(extraclean_dirs),$(eval $(call submake_template,$(dir),extraclean)))
+
+extraclean: $(extraclean_dirs:=_extraclean)
${top_maintainer_clean}
-rm -f config-tmp-*
-rm -f *~ \#*
DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
$(DOCS):
- t=$@; IFS=-; set $$t; IFS=; $(MAKE) -C doc/$$1 $$2
+ $(MAKE) -C doc/$(subst -, ,$@)
.PHONY: $(DOCS) docs pdf ps
.PHONY: info dvi dist check html info-real info-dir check-info
## Install non .info forms of the documentation.
## TODO add etc/refcards.
$(INSTALL_DOC):
- t=$@; IFS=-; set $$t; IFS=; $(MAKE) -C doc/$$2 $$1-$$3
+ $(MAKE) -C doc/$(subst -, install-,$(subst install-,,$@))
.PHONY: $(INSTALL_DOC) install-doc
.PHONY: install-dvi install-html install-pdf install-ps
UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
$(UNINSTALL_DOC):
- t=$@; IFS=-; set $$t; IFS=; $(MAKE) -C doc/$$2 $$1-$$3
+ $(MAKE) -C doc/$(subst -, uninstall-,$(subst uninstall-,,$@))
.PHONY: $(UNINSTALL_DOC) uninstall-doc
.PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
$(MAKE) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) all
-.PHONY: ChangeLog change-history change-history-commit
-.PHONY: master-branch-is-current no-ChangeLog unchanged-history-files
-
-# The newest revision that should not appear in the generated ChangeLog.
-gen_origin = 455f13b8c91a51cd08e19fda737a4358a9a927d6
-
-# Convert git commit log to ChangeLog file. make-dist uses this.
-ChangeLog:
- $(AM_V_GEN)distprefix=$(distprefix) srcprefix=$(srcdir)/ \
- $(srcdir)/build-aux/gitlog-to-emacslog $(gen_origin)
+.PHONY: ChangeLog change-history change-history-commit change-history-nocommit
+.PHONY: master-branch-is-current unchanged-history-files
+CHANGELOG = ChangeLog
+emacslog = build-aux/gitlog-to-emacslog
# The ChangeLog history files are called ChangeLog.1, ChangeLog.2, ...,
# ChangeLog.$(CHANGELOG_HISTORY_INDEX_MAX). $(CHANGELOG_N) stands for
# the newest (highest-numbered) ChangeLog history file.
CHANGELOG_HISTORY_INDEX_MAX = 2
CHANGELOG_N = ChangeLog.$(CHANGELOG_HISTORY_INDEX_MAX)
+# Convert git commit log to ChangeLog file. make-dist uses this.
+# I guess this is PHONY so it always updates?
+ChangeLog:
+ $(AM_V_GEN)cd $(srcdir) && \
+ ./$(emacslog) -o $(CHANGELOG) -n $(CHANGELOG_HISTORY_INDEX_MAX)
+
# Check that we are in a good state for changing history.
-no-ChangeLog:
- test ! -f ChangeLog
master-branch-is-current:
git branch | grep -q '^\* master$$'
unchanged-history-files:
- x=$$(git diff-files --name-only $(CHANGELOG_N) Makefile.in) && \
+ x=$$(git diff-files --name-only $(CHANGELOG_N) $(emacslog)) && \
test -z "$$x"
+# Regular expression that matches the newest commit covered by a ChangeLog.
+new_commit_regexp = ^commit [0123456789abcdef]* (inclusive)
+
# Copy newer commit messages to the start of the ChangeLog history file,
# and consider them to be older.
-change-history: no-ChangeLog master-branch-is-current unchanged-history-files \
- ChangeLog
- (sed '/^;; [L]ocal Variables:/,$$d' <ChangeLog && cat $(CHANGELOG_N)) \
- >$(CHANGELOG_N).tmp
- new_origin=$$(git log --pretty=format:%H HEAD^!) && \
- sed 's/^\(gen_origin *= *\).*/\1'"$$new_origin/" \
- <Makefile.in >Makefile.in.tmp
+change-history-nocommit: master-branch-is-current unchanged-history-files
+ -rm -f ChangeLog.tmp
+ $(MAKE) ChangeLog CHANGELOG=ChangeLog.tmp
+ sed '/^This file records repository revisions/,$$d' \
+ ChangeLog.tmp >$(CHANGELOG_N).tmp
+ new_commit_line=`grep '$(new_commit_regexp)' ChangeLog.tmp` && \
+ sed 's/$(new_commit_regexp).*/'"$$new_commit_line/" \
+ $(CHANGELOG_N) >>$(CHANGELOG_N).tmp
+ rm ChangeLog.tmp
mv $(CHANGELOG_N).tmp $(CHANGELOG_N)
- mv Makefile.in.tmp Makefile.in
+
+change-history: change-history-nocommit
$(MAKE) $@-commit
# If 'make change-history' fails because the newest ChangeLog history
# file contains invalid text, fix the file by hand and then run
# 'make change-history-commit'.
change-history-commit:
- git commit -m'; make $@' $(CHANGELOG_N) Makefile.in
+ git commit -m'; make $@' $(CHANGELOG_N) $(emacslog)
.PHONY: check-declare