with_x_toolkit=$val
])
+OPTION_DEFAULT_OFF([wide-int], [prefer wide Emacs integers (typically 62-bit)])
+if test "$with_wide_int" = yes; then
+ AC_DEFINE([WIDE_EMACS_INT], 1, [Use long long for EMACS_INT if available.])
+fi
+
dnl _ON results in a '--without' option in the --help output, so
dnl the help text should refer to "don't compile", etc.
OPTION_DEFAULT_ON([xpm],[don't compile with XPM image support])
* ) srcdir="`(cd ${srcdir}; pwd)`" ;;
esac
-#### Check if the source directory already has a configured system in it.
-if test `pwd` != `(cd ${srcdir} && pwd)` \
- && test -f "${srcdir}/src/config.h" ; then
- AC_MSG_WARN([[The directory tree `${srcdir}' is being used
- as a build directory right now; it has been configured in its own
- right. To configure in another directory as well, you MUST
- use GNU make. If you do not have GNU make, then you must
- now do `make distclean' in ${srcdir},
- and then run $0 again.]])
-fi
-
#### Given the configuration name, set machfile and opsysfile to the
#### names of the m/*.h and s/*.h files we should use.
## If user specified a crt-dir, use that unconditionally.
if test "X$CRT_DIR" = "X"; then
-
+
case "$canonical" in
x86_64-*-linux-gnu* | s390x-*-linux-gnu*)
## On x86-64 and s390x GNU/Linux distributions, the standard library
## Default is /usr/lib.
test "X$CRT_DIR" = "X" && CRT_DIR=/usr/lib
+ ## If we're using gcc, try to determine it automatically by asking
+ ## gcc. [If this doesn't work, CRT_DIR will remain at the
+ ## system-dependent default from above.]
+ if test "x${GCC}" = xyes; then
+ crt_file=`$CC --print-file-name=crt1.o 2>/dev/null`
+ case "$crt_file" in
+ */*)
+ CRT_DIR=`AS_DIRNAME(["$crt_file"])`
+ ;;
+ esac
+ fi
+
else
## Some platforms don't use any of these files, so it is not
AC_C_PROTOTYPES
AC_C_VOLATILE
AC_C_CONST
-dnl This isn't useful because we can't turn on use of `inline' unless
-dnl the compiler groks `extern inline'.
-dnl AC_C_INLINE
AC_CACHE_CHECK([for void * support], emacs_cv_void_star,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[void * foo;]])],
emacs_cv_void_star=yes, emacs_cv_void_star=no)])
AC_SUBST_FILE(deps_frag)
+lisp_frag=$srcdir/src/lisp.mk
+AC_SUBST_FILE(lisp_frag)
+
+
dnl checks for operating system services
AC_SYS_LONG_FILE_NAMES
ns_frag=/dev/null
NS_OBJ=
NS_OBJC_OBJ=
-NS_SUPPORT=
if test "${HAVE_NS}" = yes; then
window_system=nextstep
with_xft=no
ns_frag=$srcdir/src/ns.mk
NS_OBJ="fontset.o fringe.o image.o"
NS_OBJC_OBJ="nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o"
- NS_SUPPORT="\${lispsource}/emacs-lisp/easymenu.elc \${lispsource}/term/ns-win.elc"
fi
CFLAGS="$tmp_CFLAGS"
CPPFLAGS="$tmp_CPPFLAGS"
AC_SUBST(NS_OBJ)
AC_SUBST(NS_OBJC_OBJ)
-AC_SUBST(NS_SUPPORT)
AC_SUBST(LIB_STANDARD)
AC_SUBST_FILE(ns_frag)
HAVE_GTK=no
+GTK_OBJ=
if test "${with_gtk3}" = "yes"; then
GLIB_REQUIRED=2.28
GTK_REQUIRED=3.0
AC_MSG_ERROR($GTK_PKG_ERRORS)
fi
AC_DEFINE(HAVE_GTK3, 1, [Define to 1 if using GTK 3 or later.])
+ GTK_OBJ=emacsgtkfixed.o
fi
if test "$pkg_check_gtk" != "yes"; then
fi
fi
-GTK_OBJ=
if test x"$pkg_check_gtk" = xyes; then
AC_SUBST(GTK_CFLAGS)
else
HAVE_GTK=yes
AC_DEFINE(USE_GTK, 1, [Define to 1 if using GTK.])
- GTK_OBJ=gtkutil.o
+ GTK_OBJ="gtkutil.o $GTK_OBJ"
USE_X_TOOLKIT=none
if $PKG_CONFIG --atleast-version=2.10 gtk+-2.0; then
:
HAVE_GNUTLS=no
HAVE_GNUTLS_CALLBACK_CERTIFICATE_VERIFY=no
if test "${with_gnutls}" = "yes" ; then
- PKG_CHECK_MODULES([LIBGNUTLS], [gnutls >= 2.2.4], HAVE_GNUTLS=yes, HAVE_GNUTLS=no)
+ PKG_CHECK_MODULES([LIBGNUTLS], [gnutls >= 2.6.0], HAVE_GNUTLS=yes, HAVE_GNUTLS=no)
if test "${HAVE_GNUTLS}" = "yes"; then
AC_DEFINE(HAVE_GNUTLS, 1, [Define if using GnuTLS.])
fi
elif test x"${USE_X_TOOLKIT}" = xLUCID; then
AC_MSG_ERROR([Lucid toolkit requires X11/Xaw include files])
else
- AC_MSG_RESULT([no; do not use toolkit by default])
- USE_X_TOOLKIT=none
+ AC_MSG_ERROR([No X toolkit could be found.
+If you are sure you want Emacs compiled without an X toolkit, pass
+ --with-x-toolkit=no
+to configure. Otherwise, install the development libraries for the toolkit
+that you want to use (e.g. Gtk+) and re-run configure.])
fi
fi
fi
### Use -lgpm if available, unless `--with-gpm=no'.
HAVE_GPM=no
LIBGPM=
-MOUSE_SUPPORT=
if test "${with_gpm}" != "no"; then
AC_CHECK_HEADER(gpm.h,
[AC_CHECK_LIB(gpm, Gpm_Open, HAVE_GPM=yes)])
if test "${HAVE_GPM}" = "yes"; then
AC_DEFINE(HAVE_GPM, 1, [Define to 1 if you have the gpm library (-lgpm).])
LIBGPM=-lgpm
- ## May be reset below.
- MOUSE_SUPPORT="\$(GPM_MOUSE_SUPPORT)"
fi
fi
AC_SUBST(LIBGPM)
AC_SUBST(LIB_GCC)
-TOOLTIP_SUPPORT=
-WINDOW_SUPPORT=
## If we're using X11/GNUstep, define some consequences.
if test "$HAVE_X_WINDOWS" = "yes" || test "$HAVE_NS" = "yes"; then
AC_DEFINE(HAVE_WINDOW_SYSTEM, 1, [Define if you have a window system.])
AC_DEFINE(HAVE_MOUSE, 1, [Define if you have mouse support.])
- MOUSE_SUPPORT="\$(REAL_MOUSE_SUPPORT)"
- TOOLTIP_SUPPORT="\${lispsource}/mouse.elc"
-
- WINDOW_SUPPORT="\$(BASE_WINDOW_SUPPORT)"
- test "$HAVE_X_WINDOWS" = "yes" && \
- WINDOW_SUPPORT="$WINDOW_SUPPORT \$(X_WINDOW_SUPPORT)"
-
fi
-AC_SUBST(MOUSE_SUPPORT)
-AC_SUBST(TOOLTIP_SUPPORT)
-AC_SUBST(WINDOW_SUPPORT)
AH_TOP([/* GNU Emacs site configuration template file.
/* Turned on June 1996 supposing nobody will mind it. */
#define AMPERSAND_FULL_NAME
-/* If using GNU, then support inline function declarations. */
-/* Don't try to switch on inline handling as detected by AC_C_INLINE
- generally, because even if non-gcc compilers accept `inline', they
- may reject `extern inline'. */
-#if defined (__GNUC__)
-#define INLINE __inline__
-#else
-#define INLINE
-#endif
-
/* `subprocesses' should be defined if you want to
have code for asynchronous subprocesses
(as used in M-x compile and M-x shell).
#endif
/* These default definitions are good for almost all machines.
- The exceptions override them in m/MACHINE.h. */
+ Any exceptions should override them in m/MACHINE.h.
+ They must be usable in preprocessor conditionals. */
#ifndef BITS_PER_CHAR
#define BITS_PER_CHAR 8
#define BITS_PER_SHORT 16
#endif
-/* Note that lisp.h uses this in a preprocessor conditional, so it
- would not work to use sizeof. That being so, we do all of them
- without sizeof, for uniformity's sake. */
#ifndef BITS_PER_INT
#define BITS_PER_INT 32
#endif
#endif
#endif
+#if !defined BITS_PER_LONG_LONG && HAVE_LONG_LONG_INT
+#define BITS_PER_LONG_LONG 64
+#endif
+
/* Define if the compiler supports function prototypes. It may do so but
not define __STDC__ (e.g. DEC C by default) or may define it as zero. */
#undef PROTOTYPES
echo " Does Emacs use -ldbus? ${HAVE_DBUS}"
echo " Does Emacs use -lgconf? ${HAVE_GCONF}"
echo " Does Emacs use -lselinux? ${HAVE_LIBSELINUX}"
-echo " Does Emacs use -lgnutls? ${HAVE_GNUTLS}"
+echo " Does Emacs use -lgnutls (2.6.x or higher)? ${HAVE_GNUTLS}"
echo " Does Emacs use -lxml2? ${HAVE_LIBXML2}"
echo " Does Emacs use -lfreetype? ${HAVE_FREETYPE}"
test "${exec_prefix}" != NONE &&
exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`]
+dnl Obviously there is duplication here wrt $SUBDIR_MAKEFILES.
+dnl You _can_ use that variable in AC_CONFIG_FILES, so long as any directory
+dnl using automake (ie lib/) is explicitly listed and not "hidden" in a variable
+dnl (else you get "no `Makefile.am' found for any configure output").
+dnl This will work, but you get a config.status that is not quite right
+dnl (see http://lists.gnu.org/archive/html/bug-autoconf/2008-08/msg00028.html).
+dnl That doesn't have any obvious consequences for Emacs, but on the whole
+dnl it seems better to just live with the duplication.
+SUBDIR_MAKEFILES="lib/Makefile lib-src/Makefile oldXMenu/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile doc/lispref/Makefile src/Makefile lwlib/Makefile lisp/Makefile leim/Makefile"
+
AC_CONFIG_FILES([Makefile lib/Makefile lib-src/Makefile oldXMenu/Makefile \
- doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile \
- doc/lispref/Makefile src/Makefile \
- lwlib/Makefile lisp/Makefile leim/Makefile test/automated/Makefile])
+ doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile \
+ doc/lispref/Makefile src/Makefile lwlib/Makefile lisp/Makefile \
+ leim/Makefile])
+
+dnl test/ is not present in release tarfiles.
+opt_makefile=test/automated/Makefile
+
+if test -f $srcdir/${opt_makefile}.in; then
+ SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES $opt_makefile"
+ dnl Again, it's best not to use a variable. Though you can add
+ dnl ", [], [opt_makefile='$opt_makefile']" and it should work.
+ AC_CONFIG_FILES([test/automated/Makefile])
+fi
+
+SUBDIR_MAKEFILES_IN=`echo " ${SUBDIR_MAKEFILES}" | sed -e 's| | $(srcdir)/|g' -e 's|Makefile|Makefile.in|g'`
+
+AC_SUBST(SUBDIR_MAKEFILES_IN)
dnl Make the necessary directories, if they don't exist.
AC_CONFIG_COMMANDS([mkdirs], [