@c This is part of the Emacs manual.
-@c Copyright (C) 1985,86,87,93,94,95,97,99, 2000 Free Software Foundation, Inc.
+@c Copyright (C) 1985,86,87,93,94,95,97,99, 2000, 2001
+@c Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
-@node Files, Buffers, Fixit, Top
+@node Files, Buffers, Keyboard Macros, Top
@chapter File Handling
@cindex files
- The operating system stores data permanently in named @dfn{files}. So
+ The operating system stores data permanently in named @dfn{files}, so
most of the text you edit with Emacs comes from a file and is ultimately
stored in a file.
Most Emacs commands that operate on a file require you to specify the
file name. (Saving and reverting are exceptions; the buffer knows which
file name to use for them.) You enter the file name using the
-minibuffer (@pxref{Minibuffer}). @dfn{Completion} is available, to make
-it easier to specify long file names. @xref{Completion}.
+minibuffer (@pxref{Minibuffer}). @dfn{Completion} is available
+(@pxref{Completion}) to make it easier to specify long file names. When
+completing file names, Emacs ignores those whose file-name extensions
+appear in the variable @code{completion-ignored-extensions}; see
+@ref{Completion Options}.
For most operations, there is a @dfn{default file name} which is used
if you type just @key{RET} to enter an empty argument. Normally the
commands.
@vindex default-directory
- Each buffer has a default directory, normally the same as the
+ Each buffer has a default directory which is normally the same as the
directory of the file visited in that buffer. When you enter a file
name without a directory, the default directory is used. If you specify
a directory in a relative fashion, with a name that does not start with
@findex cd
@findex pwd
- The command @kbd{M-x pwd} prints the current buffer's default
+ The command @kbd{M-x pwd} displays the current buffer's default
directory, and the command @kbd{M-x cd} sets it (to a value read using
the minibuffer). A buffer's default directory changes only when the
@code{cd} command is used. A file-visiting buffer's default directory
-is initialized to the directory of the file that is visited there. If
+is initialized to the directory of the file that is visited in that buffer. If
you create a buffer with @kbd{C-x b}, its default directory is copied
from that of the buffer that was current at the time.
@cindex environment variables in file names
@cindex expansion of environment variables
- @samp{$} in a file name is used to substitute environment variables.
-For example, if you have used the shell command @command{export
+@cindex @code{$} in file names
+ @anchor{File Names with $}@samp{$} in a file name is used to
+substitute an environment variable. The environment variable name
+consists of all the alphanumeric characters after the @samp{$};
+alternatively, it can be enclosed in braces after the @samp{$}. For
+example, if you have used the shell command @command{export
FOO=rms/hacks} to set up an environment variable named @env{FOO}, then
you can use @file{/u/$FOO/test.c} or @file{/u/$@{FOO@}/test.c} as an
-abbreviation for @file{/u/rms/hacks/test.c}. The environment variable
-name consists of all the alphanumeric characters after the @samp{$};
-alternatively, it may be enclosed in braces after the @samp{$}. Note
-that shell commands to set environment variables affect Emacs only if
-done before Emacs is started.
+abbreviation for @file{/u/rms/hacks/test.c}. If the environment
+variable is not defined, no substitution occurs: @file{/u/$notdefined}
+stands for itself (assuming the environment variable @env{notdefined}
+is not defined).
+
+ Note that shell commands to set environment variables affect Emacs
+only when done before Emacs is started.
@cindex home directory shorthand
You can use the @file{~/} in a file name to mean your home directory,
value of the environment variable @code{HOME}; see @ref{General
Variables}.)
- To access a file with @samp{$} in its name, type @samp{$$}. This pair
-is converted to a single @samp{$} at the same time as variable
-substitution is performed for single @samp{$}. Alternatively, quote the
-whole file name with @samp{/:} (@pxref{Quoted File Names}). File names
-which begin with a literal @samp{~} should also be quoted with @samp{/:}.
+ To access a file with @samp{$} in its name, if the @samp{$} causes
+expansion, type @samp{$$}. This pair is converted to a single
+@samp{$} at the same time as variable substitution is performed for a
+single @samp{$}. Alternatively, quote the whole file name with
+@samp{/:} (@pxref{Quoted File Names}). File names which begin with a
+literal @samp{~} should also be quoted with @samp{/:}.
@findex substitute-in-file-name
The Lisp function that performs the substitution is called
@code{substitute-in-file-name}. The substitution is performed only on
file names read as such using the minibuffer.
- You can include non-ASCII characters in file names if you set the
+ You can include non-@acronym{ASCII} characters in file names if you set the
variable @code{file-name-coding-system} to a non-@code{nil} value.
@xref{Specify Coding}.
@section Visiting Files
@cindex visiting files
-@c WideCommands
@table @kbd
@item C-x C-f
Visit a file (@code{find-file}).
@cindex files, visiting and saving
@cindex saving files
- @dfn{Visiting} a file means copying its contents into an Emacs buffer
-so you can edit them. Emacs makes a new buffer for each file that you
-visit. We say that this buffer is visiting the file that it was created
-to hold. Emacs constructs the buffer name from the file name by
-throwing away the directory, keeping just the name proper. For example,
-a file named @file{/usr/rms/emacs.tex} would get a buffer named
-@samp{emacs.tex}. If there is already a buffer with that name, a unique
-name is constructed by appending @samp{<2>}, @samp{<3>}, or so on, using
-the lowest number that makes a name that is not already in use.
+ @dfn{Visiting} a file means copying its contents into an Emacs
+buffer so you can edit them. Emacs makes a new buffer for each file
+that you visit. We often say that this buffer ``is visiting'' that
+file, or that the buffer's ``visited file'' is that file. Emacs
+constructs the buffer name from the file name by throwing away the
+directory, keeping just the name proper. For example, a file named
+@file{/usr/rms/emacs.tex} would get a buffer named @samp{emacs.tex}.
+If there is already a buffer with that name, Emacs constructs a unique
+name---the normal method is to append @samp{<2>}, @samp{<3>}, and so
+on, but you can select other methods (@pxref{Uniquify}).
Each window's mode line shows the name of the buffer that is being displayed
in that window, so you can always tell what buffer you are editing.
The file name is read using the minibuffer (@pxref{Minibuffer}), with
defaulting and completion in the standard manner (@pxref{File Names}).
-While in the minibuffer, you can abort @kbd{C-x C-f} by typing @kbd{C-g}.
+While in the minibuffer, you can abort @kbd{C-x C-f} by typing
+@kbd{C-g}. File-name completion ignores certain filenames; for more
+about this, see @ref{Completion Options}.
@cindex file selection dialog
When Emacs is built with a suitable GUI toolkit, it pops up the
another copy. It selects the existing buffer containing that file.
However, before doing so, it checks that the file itself has not changed
since you visited or saved it last. If the file has changed, a warning
-message is printed. @xref{Interlocking,,Simultaneous Editing}.
+message is shown. @xref{Interlocking,,Simultaneous Editing}.
+
+@cindex maximum buffer size exceeded, error message
+ Since Emacs reads the visited file in its entirety, files whose size
+is larger than the maximum Emacs buffer size (@pxref{Buffers}) cannot be
+visited; if you try, Emacs will display an error message saying that the
+maximum buffer size has been exceeded.
@cindex creating files
- What if you want to create a new file? Just visit it. Emacs prints
+ What if you want to create a new file? Just visit it. Emacs displays
@samp{(New file)} in the echo area, but in other respects behaves as if
you had visited an existing empty file. If you make any changes and
save them, the file is created.
contents to the normal Emacs convention, which is that the newline
character separates lines. This is a part of the general feature of
coding system conversion (@pxref{Coding Systems}), and makes it possible
-to edit files imported from various different operating systems with
+to edit files imported from different operating systems with
equal convenience. If you change the text and save the file, Emacs
performs the inverse conversion, changing newlines back into
carriage-return linefeed or just carriage-return if appropriate.
@cindex wildcard characters in file names
@vindex find-file-wildcards
- If the file name you specify contains shell-style wildcard
-characters, Emacs visits all the files that match it. Wildcards
-comprise @samp{?}, @samp{*} and @samp{[@dots{}]} sequences.
-@xref{Quoted File Names}, for how to visit a file whose name actually
-contains wildcard characters. You can disable the wildcard feature by
-customizing @code{find-file-wildcards}.
+ If the file name you specify contains shell-style wildcard characters,
+Emacs visits all the files that match it. Wildcards include @samp{?},
+@samp{*}, and @samp{[@dots{}]} sequences. @xref{Quoted File Names}, for
+information on how to visit a file whose name actually contains wildcard
+characters. You can disable the wildcard feature by customizing
+@code{find-file-wildcards}.
If you visit a file that the operating system won't let you modify,
-Emacs makes the buffer read-only, so that you won't go ahead and make
-changes that you'll have trouble saving afterward. You can make the
-buffer writable with @kbd{C-x C-q} (@code{vc-toggle-read-only}).
-@xref{Misc Buffer}.
+or that is marked read-only, Emacs makes the buffer read-only too, so
+that you won't go ahead and make changes that you'll have trouble
+saving afterward. You can make the buffer writable with @kbd{C-x C-q}
+(@code{toggle-read-only}). @xref{Misc Buffer}.
@kindex C-x C-r
@findex find-file-read-only
- Occasionally you might want to visit a file as read-only in order to
-protect yourself from entering changes accidentally; do so by visiting
-the file with the command @kbd{C-x C-r} (@code{find-file-read-only}).
+ If you want to visit a file as read-only in order to protect
+yourself from entering changes accidentally, visit it with the command
+@kbd{C-x C-r} (@code{find-file-read-only}) instead of @kbd{C-x C-f}.
@kindex C-x C-v
@findex find-alternate-file
wrong file name), use the @kbd{C-x C-v} command
(@code{find-alternate-file}) to visit the file you really wanted.
@kbd{C-x C-v} is similar to @kbd{C-x C-f}, but it kills the current
-buffer (after first offering to save it if it is modified). When it
-reads the file name to visit, it inserts the entire default file name in
-the buffer, with point just after the directory part; this is convenient
-if you made a slight error in typing the name.
+buffer (after first offering to save it if it is modified). When
+@kbd{C-x C-v} reads the file name to visit, it inserts the entire
+default file name in the buffer, with point just after the directory
+part; this is convenient if you made a slight error in typing the name.
If you find a file which exists but cannot be read, @kbd{C-x C-f}
signals an error.
system. @xref{Frames}.
@findex find-file-literally
- If you wish to edit a file as a sequence of ASCII characters with no special
+ If you wish to edit a file as a sequence of @acronym{ASCII} characters with no special
encoding or conversion, use the @kbd{M-x find-file-literally} command.
It visits a file, like @kbd{C-x C-f}, but does not do format conversion
(@pxref{Formatted Text}), character code conversion (@pxref{Coding
If you already have visited the same file in the usual (non-literal)
manner, this command asks you whether to visit it literally instead.
-@vindex find-file-hooks
-@vindex find-file-not-found-hooks
+@vindex find-file-hook
+@vindex find-file-not-found-functions
Two special hook variables allow extensions to modify the operation of
visiting files. Visiting a file that does not exist runs the functions
-in the list @code{find-file-not-found-hooks}; this variable holds a list
+in the list @code{find-file-not-found-functions}; this variable holds a list
of functions, and the functions are called one by one (with no
arguments) until one of them returns non-@code{nil}. This is not a
-normal hook, and the name ends in @samp{-hooks} rather than @samp{-hook}
+normal hook, and the name ends in @samp{-functions} rather than @samp{-hook}
to indicate that fact.
- Any visiting of a file, whether extant or not, expects
-@code{find-file-hooks} to contain a list of functions, and calls them
-all, one by one, with no arguments. This variable is really a normal
-hook, but it has an abnormal name for historical compatibility. In the
-case of a nonexistent file, the @code{find-file-not-found-hooks} are run
-first. @xref{Hooks}.
+ Successful visiting of any file, whether existing or not, calls the
+functions in the list @code{find-file-hook}, with no arguments.
+This variable is a normal hook. In the case of a nonexistent file, the
+@code{find-file-not-found-functions} are run first. @xref{Hooks}.
There are several ways to specify automatically the major mode for
editing the file (@pxref{Choosing Modes}), and to specify local
@table @kbd
@item C-x C-s
-Save the current buffer in its visited file (@code{save-buffer}).
+Save the current buffer in its visited file on disk (@code{save-buffer}).
@item C-x s
Save any or all buffers in their visited files (@code{save-some-buffers}).
@item M-~
Forget that the current buffer has been changed (@code{not-modified}).
With prefix argument (@kbd{C-u}), mark the current buffer as changed.
@item C-x C-w
-Save the current buffer in a specified file (@code{write-file}).
+Save the current buffer as a specified file name (@code{write-file}).
@item M-x set-visited-file-name
Change the file name under which the current buffer will be saved.
@end table
@findex set-visited-file-name
@kbd{M-x set-visited-file-name} alters the name of the file that the
current buffer is visiting. It reads the new file name using the
-minibuffer. Then it specifies the visited file name and changes the
-buffer name correspondingly (as long as the new name is not in use).
-@code{set-visited-file-name} does not save the buffer in the newly
-visited file; it just alters the records inside Emacs in case you do
-save later. It also marks the buffer as ``modified'' so that @kbd{C-x
-C-s} in that buffer @emph{will} save.
+minibuffer. Then it marks the buffer as visiting that file name, and
+changes the buffer name correspondingly. @code{set-visited-file-name}
+does not save the buffer in the newly visited file; it just alters the
+records inside Emacs in case you do save later. It also marks the
+buffer as ``modified'' so that @kbd{C-x C-s} in that buffer
+@emph{will} save.
@kindex C-x C-w
@findex write-file
same effect as @kbd{C-x C-w}; that is, it reads a file name, marks the
buffer as visiting that file, and saves it there. The default file name in
a buffer that is not visiting a file is made by combining the buffer name
-with the buffer's default directory.
+with the buffer's default directory (@pxref{File Names}).
If the new file name implies a major mode, then @kbd{C-x C-w} switches
to that major mode, in most cases. The command
For files managed by a version control system (@pxref{Version
Control}), the variable @code{vc-make-backup-files} determines whether
-to make backup files. By default, it is @code{nil}, since backup files
+to make backup files. By default it is @code{nil}, since backup files
are redundant when you store all the previous versions in a version
control system. @xref{General VC Options}.
saves the buffer, but first makes the previous file contents into a new
backup file. @kbd{C-u C-u C-u C-x C-s} does both things: it makes a
backup from the previous contents, and arranges to make another from the
-newly saved contents, if you save again.
+newly saved contents if you save again.
@menu
* Names: Backup Names. How backup files are named;
@vindex make-backup-file-name-function
@vindex backup-directory-alist
- You can change this behaviour by defining the variable
+ You can change this behavior by defining the variable
@code{make-backup-file-name-function} to a suitable function.
Alternatively you can customize the variable
@code{backup-directory-alist} to specify that files matching certain
@node Backup Deletion
@subsubsection Automatic Deletion of Backups
- To prevent unlimited consumption of disk space, Emacs can delete numbered
+ To prevent excessive consumption of disk space, Emacs can delete numbered
backup versions automatically. Generally Emacs keeps the first few backups
and the latest few backups, deleting any in between. This happens every
time a new backup is made.
@vindex kept-new-versions
The two variables @code{kept-old-versions} and
@code{kept-new-versions} control this deletion. Their values are,
-respectively the number of oldest (lowest-numbered) backups to keep and
-the number of newest (highest-numbered) ones to keep, each time a new
-backup is made. Recall that these values are used just after a new
-backup version is made; that newly made backup is included in the count
-in @code{kept-new-versions}. By default, both variables are 2.
+respectively, the number of oldest (lowest-numbered) backups to keep
+and the number of newest (highest-numbered) ones to keep, each time a
+new backup is made. The backups in the middle (excluding those oldest
+and newest) are the excess middle versions---those backups are
+deleted. These variables' values are used when it is time to delete
+excess versions, just after a new backup version is made; the newly
+made backup is included in the count in @code{kept-new-versions}. By
+default, both variables are 2.
@vindex delete-old-versions
- If @code{delete-old-versions} is non-@code{nil}, the excess
-middle versions are deleted without a murmur. If it is @code{nil}, the
-default, then you are asked whether the excess middle versions should
-really be deleted.
+ If @code{delete-old-versions} is non-@code{nil}, Emacs deletes the
+excess backup files silently. If it is @code{nil}, the default, Emacs
+asks you whether it should delete the excess backup versions.
Dired's @kbd{.} (Period) command can also be used to delete old versions.
@xref{Dired Deletion}.
@node Backup Copying
@subsubsection Copying vs.@: Renaming
- Backup files can be made by copying the old file or by renaming it. This
-makes a difference when the old file has multiple names. If the old file
-is renamed into the backup file, then the alternate names become names for
-the backup file. If the old file is copied instead, then the alternate
-names remain names for the file that you are editing, and the contents
-accessed by those names will be the new contents.
+ Backup files can be made by copying the old file or by renaming it.
+This makes a difference when the old file has multiple names (hard
+links). If the old file is renamed into the backup file, then the
+alternate names become names for the backup file. If the old file is
+copied instead, then the alternate names remain names for the file
+that you are editing, and the contents accessed by those names will be
+the new contents.
The method of making a backup file may also affect the file's owner
and group. If copying is used, these do not change. If renaming is used,
if you start Emacs as the superuser. The fourth variable,
@code{backup-by-copying-when-privileged-mismatch}, gives the highest
numeric user-id for which @code{backup-by-copying-when-mismatch} will be
-forced on. This is useful when low-numbered user-id are assigned to
+forced on. This is useful when low-numbered user-ids are assigned to
special system users, such as @code{root}, @code{bin}, @code{daemon},
etc., which must maintain ownership of files.
@item p
Proceed. Go ahead and edit the file despite its being locked by someone else.
@item q
-Quit. This causes an error (@code{file-locked}) and the modification you
-were trying to make in the buffer does not actually take place.
+Quit. This causes an error (@code{file-locked}), and the buffer
+contents remain unchanged---the modification you were trying to make
+does not actually take place.
@end table
Note that locking works on the basis of a file name; if a file has
file was last visited or saved. If the date does not match, it implies
that changes were made in the file in some other way, and these changes are
about to be lost if Emacs actually does save. To prevent this, Emacs
-prints a warning message and asks for confirmation before saving.
+displays a warning message and asks for confirmation before saving.
Occasionally you will know why the file was changed and know that it does
not matter; then you can answer @kbd{yes} and proceed. Otherwise, you should
cancel the save with @kbd{C-g} and investigate the situation.
that copying to or from one of them is sufficient to update the file
on all of them. Each shadow cluster has a name, and specifies the
network address of a primary host (the one we copy files to), and a
-regular expression that matches the hostnames of all the other hosts
+regular expression that matches the host names of all the other hosts
in the cluster. You can define a shadow cluster with @kbd{M-x
shadow-define-cluster}.
@cindex modification dates
@cindex locale, date format
-You can arrange put a time stamp in a file, so that it will be updated
+You can arrange to put a time stamp in a file, so that it will be updated
automatically each time you edit and save the file. The time stamp
has to be in the first eight lines of the file, and you should
insert it like this:
or like this:
@example
-Time-stamp: ""
+Time-stamp: " "
@end example
Then add the hook function @code{time-stamp} to the hook
-@code{write-file-hooks}; that hook function will automatically update
+@code{write-file-functions}; that hook function will automatically update
the time stamp, inserting the current date and time when you save the
file. You can also use the command @kbd{M-x time-stamp} to update the
time stamp manually. For other customizations, see the Custom group
@file{foo.c} is auto-saved in a file @file{#foo.c#}. Most buffers that
are not visiting files are auto-saved only if you request it explicitly;
when they are auto-saved, the auto-save file name is made by appending
-@samp{#%} to the front and @samp{#} to the rear of buffer name. For
+@samp{#} to the front and rear of buffer name, then
+adding digits and letters at the end for uniqueness. For
example, the @samp{*mail*} buffer in which you compose messages to be
-sent is auto-saved in a file named @file{#%*mail*#}. Auto-save file
+sent might auto-saved in a file named @file{#*mail*#704juu}. Auto-save file
names are made this way unless you reprogram parts of Emacs to do
something different (the functions @code{make-auto-save-file-name} and
@code{auto-save-file-name-p}). The file name to be used for auto-saving
in a buffer is calculated when auto-saving is turned on in that buffer.
+@cindex auto-save for remote files
+@vindex auto-save-file-name-transforms
+ The variable @code{auto-save-file-name-transforms} allows a degree
+of control over the auto-save file name. It lets you specify a series
+of regular expressions and replacements to transform the auto save
+file name. The default value puts the auto-save files for remote
+files (@pxref{Remote Files}) into the temporary file directory on the
+local machine.
+
When you delete a substantial part of the text in a large buffer, auto
save turns off temporarily in that buffer. This is because if you
deleted the text unintentionally, you might find the auto-save file more
auto-save}.
@vindex auto-save-visited-file-name
- If you want auto-saving to be done in the visited file, set the variable
-@code{auto-save-visited-file-name} to be non-@code{nil}. In this mode,
-there is really no difference between auto-saving and explicit saving.
+ If you want auto-saving to be done in the visited file rather than
+in a separate auto-save file, set the variable
+@code{auto-save-visited-file-name} to a non-@code{nil} value. In this
+mode, there is no real difference between auto-saving and explicit
+saving.
@vindex delete-auto-save-files
A buffer's auto-save file is deleted when you save the buffer in its
Emacs does auto-saving periodically based on counting how many characters
you have typed since the last time auto-saving was done. The variable
@code{auto-save-interval} specifies how many characters there are between
-auto-saves. By default, it is 300.
+auto-saves. By default, it is 300. Emacs doesn't accept values that are
+too small: if you customize @code{auto-save-interval} to a value less
+than 20, Emacs will behave as if the value is 20.
@vindex auto-save-timeout
Auto-saving also takes place when you stop typing for a while. The
@vindex auto-save-list-file-prefix
Emacs records interrupted sessions for later recovery in files named
-@file{~/.emacs.d/auto-save-list/.saves-@var{pid}-@var{hostname}}. The
-@samp{~/.emacs.d/auto-save-list/.saves-} portion of these names comes
-from the value of @code{auto-save-list-file-prefix}. You can record
-sessions in a different place by customizing that variable. If you
-set @code{auto-save-list-file-prefix} to @code{nil} in your
-@file{.emacs} file, sessions are not recorded for recovery.
+@file{~/.emacs.d/auto-save-list/.saves-@var{pid}-@var{hostname}}. All
+of this name except @file{@var{pid}-@var{hostname}} comes from the
+value of @code{auto-save-list-file-prefix}. You can record sessions
+in a different place by customizing that variable. If you set
+@code{auto-save-list-file-prefix} to @code{nil} in your @file{.emacs}
+file, sessions are not recorded for recovery.
@node File Aliases
@section File Name Aliases
+@cindex symbolic links (visiting)
+@cindex hard links (visiting)
Symbolic links and hard links both make it possible for several file
names to refer to the same file. Hard links are alternate names that
If you visit two names for the same file, normally Emacs makes
two different buffers, but it warns you about the situation.
-@vindex find-file-existing-other-name
+@vindex find-file-existing-other-name
+@vindex find-file-suppress-same-file-warnings
Normally, if you visit a file which Emacs is already visiting under
a different name, Emacs displays a message in the echo area and uses
the existing buffer visiting that file. This can happen on systems
that support symbolic links, or if you use a long file name on a
-system that truncates long file names. You can disable this feature
-by setting the variable @code{find-file-existing-other-name} to
-@code{nil}. Then if you visit the same file under two different names,
-you get a separate buffer for each file name.
+system that truncates long file names. You can suppress the message by
+setting the variable @code{find-file-suppress-same-file-warnings} to a
+non-@code{nil} value. You can disable this feature entirely by setting
+the variable @code{find-file-existing-other-name} to @code{nil}: then
+if you visit the same file under two different names, you get a separate
+buffer for each file name.
@vindex find-file-visit-truename
@cindex truenames of files
@dfn{Version control systems} are packages that can record multiple
versions of a source file, usually storing the unchanged parts of the
file just once. Version control systems also record history information
-such as the creation time of each version, who created it, and a
+such as the creation time of each version, who created it, and a
description of what was changed in that version.
The Emacs version control interface is called VC. Its commands work
replace SCCS, known as CSSC; if you are using SCCS and don't want to
make the incompatible change to RCS or CVS, you can switch to CSSC.
+ VC is enabled by default in Emacs. To disable it, set the
+customizable variable @code{vc-handled-backends} to @code{nil}
+(@pxref{Customizing VC}).
+
@menu
* Introduction to VC:: How version control works in general.
-* VC Mode Line:: How the mode line shows version control status.
+* VC Mode Line:: How the mode line shows version control status.
* Basic VC Editing:: How to edit a file under version control.
* Old Versions:: Examining and comparing old versions.
* Secondary VC Commands:: The commands used a little less frequently.
@menu
* Version Systems:: Supported version control back-end systems.
* VC Concepts:: Words and concepts related to version control.
+* Types of Log File:: The per-file VC log in contrast to the ChangeLog.
@end menu
@node Version Systems
check-in time. However, CVS can also be set up to require locking.
(@pxref{CVS Options}).
+@node Types of Log File
+@subsubsection Types of Log File
+@cindex types of log file
+@cindex log File, types of
+@cindex version control log
+
+GNU projects under a revision control system generally possess
+@emph{two} types of log for changes. One is the per-file log
+maintained by the revision control system: each time you check in a
+change, you must fill out a @dfn{log entry} for the change (@pxref{Log
+Buffer}). This kind of log is called the @dfn{version control log},
+also the @dfn{revision control log}, @dfn{RCS log}, or @dfn{CVS log}.
+
+The other kind of log is the change log file, typically a file called
+@file{ChangeLog}. It provides a chronological record of all changes
+to a large portion of a program---one directory and its
+subdirectories. A small program would use one @file{ChangeLog} file;
+a large program may well merit a @file{ChangeLog} file in each major
+directory. @xref{Change Log}.
+
+When you use version control, you can use just the per-file log if you
+wish, or you can use both kinds of logs. When you use both, you
+typically want to write just one entry for each change. You can write
+the entry in @file{ChangeLog}, then copy it to the log buffer when you
+check in the change. Or you can write the entry in the log buffer
+while checking in the change, and later use the @kbd{C-x v a} command
+to copy it to @file{ChangeLog} (@pxref{Change Logs and VC}).
+
@node VC Mode Line
@subsection Version Control and the Mode Line
either locking or check-in, depending on the situation.
@table @kbd
-@item C-x C-q
@itemx C-x v v
Perform the next logical version control operation on this file.
@end table
@findex vc-next-action
-@findex vc-toggle-read-only
@kindex C-x v v
-@kindex C-x C-q @r{(Version Control)}
- Strictly speaking, the command for this job is @code{vc-next-action},
-bound to @kbd{C-x v v}. However, the normal meaning of @kbd{C-x C-q} is
-to make a read-only buffer writable, or vice versa; we have extended it
-to do the same job properly for files managed by version control, by
-performing the appropriate version control operations. When you type
-@kbd{C-x C-q} on a registered file, it acts like @kbd{C-x v v}.
-
The precise action of this command depends on the state of the file,
and whether the version control system uses locking or not. SCCS and
RCS normally use locking; CVS normally does not use locking.
+@findex vc-toggle-read-only
+@kindex C-x C-q @r{(Version Control)}
+ As a special convenience that is particularly useful for files with
+locking, you can let Emacs check a file in or out whenever you change
+its read-only flag. This means, for example, that you cannot
+accidentally edit a file without properly checking it out first. To
+achieve this, bind the key @kbd{C-x C-q} to @kbd{vc-toggle-read-only}
+in your @file{~/.emacs} file. (@xref{Init Rebinding}.)
+
@menu
* VC with Locking:: RCS in its default mode, SCCS, and optionally CVS.
* Without Locking:: Without locking: default mode for CVS.
-* Advanced C-x C-q:: Advanced features available with a prefix argument.
+* Advanced C-x v v:: Advanced features available with a prefix argument.
* Log Buffer:: Features available in log entry buffers.
@end menu
-
-@node VC with Locking
+
+@node VC with Locking
@subsubsection Basic Version Control with Locking
If locking is used for the file (as with SCCS, and RCS in its default
-mode), @kbd{C-x C-q} can either lock a file or check it in:
+mode), @kbd{C-x v v} can either lock a file or check it in:
@itemize @bullet
@item
-If the file is not locked, @kbd{C-x C-q} locks it, and
+If the file is not locked, @kbd{C-x v v} locks it, and
makes it writable so that you can change it.
@item
-If the file is locked by you, and contains changes, @kbd{C-x C-q} checks
+If the file is locked by you, and contains changes, @kbd{C-x v v} checks
in the changes. In order to do this, it first reads the log entry
for the new version. @xref{Log Buffer}.
@item
If the file is locked by you, but you have not changed it since you
-locked it, @kbd{C-x C-q} releases the lock and makes the file read-only
+locked it, @kbd{C-x v v} releases the lock and makes the file read-only
again.
@item
-If the file is locked by some other user, @kbd{C-x C-q} asks you whether
+If the file is locked by some other user, @kbd{C-x v v} asks you whether
you want to ``steal the lock'' from that user. If you say yes, the file
becomes locked by you, but a message is sent to the person who had
formerly locked the file, to inform him of what has happened.
unmodified; it flips to @samp{:} as soon as you save any changes in the
work file.
- Here is what @kbd{C-x C-q} does when using CVS:
+ Here is what @kbd{C-x v v} does when using CVS:
@itemize @bullet
@item
@item
If there are no new changes in the master file, but you have made
-modifications in your work file, @kbd{C-x C-q} checks in your changes.
+modifications in your work file, @kbd{C-x v v} checks in your changes.
In order to do this, it first reads the log entry for the new version.
@xref{Log Buffer}.
@item
-If the file is not modified, the @kbd{C-x C-q} does nothing.
+If the file is not modified, the @kbd{C-x v v} does nothing.
@end itemize
These rules also apply when you use RCS in the mode that does not
with RCS in a future Emacs version.
In addition, locking is possible with RCS even in this mode, although
-it is not required; @kbd{C-x C-q} with an unmodified file locks the
+it is not required; @kbd{C-x v v} with an unmodified file locks the
file, just as it does with RCS in its normal (locking) mode.
-@node Advanced C-x C-q
-@subsubsection Advanced Control in @kbd{C-x C-q}
+@node Advanced C-x v v
+@subsubsection Advanced Control in @kbd{C-x v v}
+@cindex version number to check in/out
When you give a prefix argument to @code{vc-next-action} (@kbd{C-u
-C-x C-q}), it still performs the next logical version control
+C-x v v}), it still performs the next logical version control
operation, but accepts additional arguments to specify precisely how
to do the operation.
@itemize @bullet
@item
If the file is modified (or locked), you can specify the version
-number to use for the new verion that you check-in. This is one way
+number to use for the new version that you check in. This is one way
to create a new branch (@pxref{Branches}).
@item
version to select; this lets you start working from an older version,
or on another branch. If you do not enter any version, that takes you
to the highest version on the current branch; therefore @kbd{C-u C-x
-C-q @key{RET}} is a convenient way to get the latest version of a file from
+v v @key{RET}} is a convenient way to get the latest version of a file from
the repository.
@item
+@cindex specific version control system
Instead of the version number, you can also specify the name of a
version control system. This is useful when one file is being managed
-with two version control systems at the same time file (@pxref{Local
+with two version control systems at the same time (@pxref{Local
Version Control}).
@end itemize
@node Log Buffer
@subsubsection Features of the Log Entry Buffer
- When you check in changes, @kbd{C-x C-q} first reads a log entry. It
+ When you check in changes, @kbd{C-x v v} first reads a log entry. It
pops up a buffer called @samp{*VC-Log*} for you to enter the log entry.
When you are finished, type @kbd{C-c C-c} in the @samp{*VC-Log*} buffer.
That is when check-in really happens.
@findex vc-version-other-window
@kindex C-x v ~
- To examine an old version in toto, visit the file and then type
+ To examine an old version in its entirety, visit the file and then type
@kbd{C-x v ~ @var{version} @key{RET}} (@code{vc-version-other-window}).
This puts the text of version @var{version} in a file named
@file{@var{filename}.~@var{version}~}, and visits it in its own buffer
file, this command compares the two specified versions of all registered
files in that directory and its subdirectories.
-@vindex diff-switches
@vindex vc-diff-switches
+@vindex vc-rcs-diff-switches
@kbd{C-x v =} works by running a variant of the @code{diff} utility
-designed to work with the version control system in use. Emacs passes
-the contents of the variable @code{diff-switches} to it; you can
-specify comparison options for version control in
-@code{vc-diff-switches}, and there are similar variables for each
-specific system---@code{vc-rcs-diff-switches}, and so on.
+designed to work with the version control system in use. When you
+invoke @code{diff} this way, in addition to the options specified by
+@code{diff-switches} (@pxref{Comparing Files}), it receives those
+specified by @code{vc-diff-switches}, plus those specified for the
+specific back end by @code{vc-@var{backend}-diff-switches}. For
+instance, when the version control back end is RCS, @code{diff} uses
+the options in @code{vc-rcs-diff-switches}. The
+@samp{vc@dots{}diff-switches} variables are @code{nil} by default.
Unlike the @kbd{M-x diff} command, @kbd{C-x v =} does not try to
locate the changes in the old and new versions. This is because
@kindex C-x v g
For CVS-controlled files, you can display the result of the CVS
annotate command, using colors to enhance the visual appearance. Use
-the command @kbd{M-x vc-annotate} to do this. Red means new, blue means
-old, and intermediate colors indicate intermediate ages. A prefix
-argument @var{n} specifies a stretch factor for the time scale; it makes
-each color cover a period @var{n} times as long.
+the command @kbd{M-x vc-annotate} to do this. It creates a new buffer
+to display file's text, colored to show how old each part is. Text
+colored red is new, blue means old, and intermediate colors indicate
+intermediate ages. By default, the time scale is 360 days, so that
+everything more than one year old is shown in blue.
+
+ When you give a prefix argument to this command, it uses the
+minibuffer to read two arguments: which version number to display and
+annotate (instead of the current file contents), and a stretch factor
+for the time scale. A stretch factor of 0.1 means that the color
+range from red to blue spans the past 36 days instead of 360 days. A
+stretch factor greater than 1 means the color range spans more than a
+year.
@node Secondary VC Commands
@subsection The Secondary Commands of VC
* Registering:: Putting a file under version control.
* VC Status:: Viewing the VC status of files.
* VC Undo:: Cancelling changes before or after check-in.
-* VC Dired Mode:: Listing files managed by version control.
+* VC Dired Mode:: Listing files managed by version control.
* VC Dired Commands:: Commands to use in a VC Dired buffer.
@end menu
RCS as the ultimate default.
If locking is in use, @kbd{C-x v i} leaves the file unlocked and
-read-only. Type @kbd{C-x C-q} if you wish to start editing it. After
+read-only. Type @kbd{C-x v v} if you wish to start editing it. After
registering a file with CVS, you must subsequently commit the initial
-version by typing @kbd{C-x C-q}.
+version by typing @kbd{C-x v v}.
@vindex vc-default-init-version
+@cindex initial version number to register
The initial version number for a newly registered file is 1.1, by
default. You can specify a different default by setting the variable
@code{vc-default-init-version}, or you can give @kbd{C-x v i} a numeric
* Switching Branches:: How to get to another existing branch.
* Creating Branches:: How to start a new branch.
* Merging:: Transferring changes between branches.
-* Multi-User Branching:: Multiple users working at multiple branches
+* Multi-User Branching:: Multiple users working at multiple branches
in parallel.
@end menu
@node Switching Branches
@subsubsection Switching between Branches
- To switch between branches, type @kbd{C-u C-x C-q} and specify the
+ To switch between branches, type @kbd{C-u C-x v v} and specify the
version number you want to select. This version is then visited
@emph{unlocked} (write-protected), so you can examine it before locking
it. Switching branches in this way is allowed only when the file is not
To create a new branch from a head version (one that is the latest in
the branch that contains it), first select that version if necessary,
-lock it with @kbd{C-x C-q}, and make whatever changes you want. Then,
-when you check in the changes, use @kbd{C-u C-x C-q}. This lets you
+lock it with @kbd{C-x v v}, and make whatever changes you want. Then,
+when you check in the changes, use @kbd{C-u C-x v v}. This lets you
specify the version number for the new version. You should specify a
suitable branch number for a branch starting at the current version.
For example, if the current version is 2.5, the branch number should be
To create a new branch at an older version (one that is no longer the
head of a branch), first select that version (@pxref{Switching
-Branches}), then lock it with @kbd{C-x C-q}. You'll be asked to
+Branches}), then lock it with @kbd{C-x v v}. You'll be asked to
confirm, when you lock the old version, that you really mean to create a
new branch---if you say no, you'll be offered a chance to lock the
latest version instead.
- Then make your changes and type @kbd{C-x C-q} again to check in a new
+ Then make your changes and type @kbd{C-x v v} again to check in a new
version. This automatically creates a new branch starting from the
selected version. You need not specially request a new branch, because
that's the only way to add a new version at a point that is not the head
After the branch is created, you ``stay'' on it. That means that
subsequent check-ins create new versions on that branch. To leave the
branch, you must explicitly select a different version with @kbd{C-u C-x
-C-q}. To transfer changes from one branch to another, use the merge
+v v}. To transfer changes from one branch to another, use the merge
command, described in the next section.
@node Merging
regardless of whether you have already changed the file yourself.
You can also enter a branch number or a pair of version numbers in
-the minibuffer. Then it finds the changes from that branch, or between
-the two versions you specified, and merges them into the current version
-of the current file.
+the minibuffer. Then @kbd{C-x v m} finds the changes from that
+branch, or the differences between the two versions you specified, and
+merges them into the current version of the current file.
As an example, suppose that you have finished a certain feature on
branch 1.3.1. In the meantime, development on the trunk has proceeded
to version 1.5. To merge the changes from the branch to the trunk,
-first go to the head version of the trunk, by typing @kbd{C-u C-x C-q
+first go to the head version of the trunk, by typing @kbd{C-u C-x v v
@key{RET}}. Version 1.5 is now current. If locking is used for the file,
-type @kbd{C-x C-q} to lock version 1.5 so that you can change it. Next,
+type @kbd{C-x v v} to lock version 1.5 so that you can change it. Next,
type @kbd{C-x v m 1.3.1 @key{RET}}. This takes the entire set of changes on
branch 1.3.1 (relative to version 1.3, where the branch started, up to
the last version on the branch) and merges it into the current version
@cindex vc-resolve-conflicts
Then you can resolve the conflicts by editing the file manually. Or
you can type @code{M-x vc-resolve-conflicts} after visiting the file.
-This starts an Ediff session, as described above.
+This starts an Ediff session, as described above. Don't forget to
+check in the merged version afterwards.
@node Multi-User Branching
@subsubsection Multi-User Branching
If the files do not have version headers, you must instead tell Emacs
explicitly in each session which branch you are working on. To do this,
-first find the file, then type @kbd{C-u C-x C-q} and specify the correct
+first find the file, then type @kbd{C-u C-x v v} and specify the correct
branch number. This ensures that Emacs knows which branch it is using
during this particular editing session.
working area, then works by direct interactions with the CVS server.
One difficulty is that access to the CVS server is often slow, and
-that developers might need to work offline as well. VC is designed
+that developers might need to work off-line as well. VC is designed
to reduce the amount of network interaction necessary.
@menu
You can do this at any time; it does not matter whether you have
already modified the file with respect to the version in the CVS
repository. If possible, VC tries to make the RCS master start with
-the unmodified repository version, then checking in any local changes
+the unmodified repository version, then checks in any local changes
as a new version. This works if you have not made any changes yet, or
if the unmodified repository version exists locally as a version
backup (@pxref{Version Backups}). If the unmodified version is not
available locally, the RCS master starts with the modified version;
-the only drawback of this is that you cannot compare your changes
+the only drawback to this is that you cannot compare your changes
locally to what is stored in the repository.
The version number of the RCS master is derived from the current CVS
While using local RCS, you can pick up recent changes from the CVS
repository into your local file, or commit some of your changes back
to CVS, without terminating local RCS version control. To do this,
-switch to the CVS backend temporarily, with the @kbd{C-x v b} command:
+switch to the CVS back end temporarily, with the @kbd{C-x v b} command:
@table @kbd
@item C-x v b
Using @code{vc-rename-file} makes the snapshot remain valid for
retrieval, but it does not solve all problems. For example, some of the
-files in the program probably refer to others by name. At the very
+files in your program probably refer to others by name. At the very
least, the makefile probably mentions the file that you renamed. If you
retrieve an old snapshot, the renamed file is retrieved under its new
name, which is not the name that the makefile expects. So the program
@menu
* Change Logs and VC:: Generating a change log file from log entries.
-* Renaming and VC:: A command to rename both the source and master
+* Renaming and VC:: A command to rename both the source and master
file correctly.
* Version Headers:: Inserting version control headers into working files.
@end menu
@noindent
You can then edit the new change log entry further as you wish.
- Some of the new change log entry may duplicate what's already in
+ Some of the new change log entries may duplicate what's already in
ChangeLog. You will have to remove these duplicates by hand.
Normally, the log entry for file @file{foo} is displayed as @samp{*
make VC behave correctly (@pxref{Multi-User Branching}).
Searching for version headers is controlled by the variable
-@code{vc-consult-headers}. If it is non-@code{nil}, Emacs searches for
-headers to determine the version number you are editing. Setting it to
-@code{nil} disables this feature.
+@code{vc-consult-headers}. If it is non-@code{nil} (the default),
+Emacs searches for headers to determine the version number you are
+editing. Setting it to @code{nil} disables this feature.
@kindex C-x v h
@findex vc-insert-headers
each string in the list is inserted as a separate header on a line of
its own.
- It is often necessary to use ``superfluous'' backslashes when writing
-the strings that you put in this variable. This is to prevent the
-string in the constant from being interpreted as a header itself if the
-Emacs Lisp file containing it is maintained with version control.
+ It is often necessary to use ``superfluous'' backslashes when
+writing the strings that you put in this variable. For instance, you
+might write @code{"$Id\$"} rather than @code{"$Id@w{$}"}. The extra
+backslash prevents the string constant from being interpreted as a
+header, if the Emacs Lisp file containing it is maintained with
+version control.
@vindex vc-comment-alist
Each header is inserted surrounded by tabs, inside comment delimiters,
control systems VC should handle. The default value is @code{(RCS CVS
SCCS)}, so it contains all three version systems that are currently
supported. If you want VC to ignore one or more of these systems,
-exclude its name from the list.
+exclude its name from the list. To disable VC entirely, set this
+variable to @code{nil}.
The order of systems in the list is significant: when you visit a file
registered in more than one system (@pxref{Local Version Control}),
@vindex vc-keep-workfiles
Normally the work file exists all the time, whether it is locked or
not. If you set @code{vc-keep-workfiles} to @code{nil}, then checking
-in a new version with @kbd{C-x C-q} deletes the work file; but any
+in a new version with @kbd{C-x v v} deletes the work file; but any
attempt to visit the file with Emacs creates it again. (With CVS, work
files are always kept.)
asks you each time whether to follow the link.
@vindex vc-suppress-confirm
- If @code{vc-suppress-confirm} is non-@code{nil}, then @kbd{C-x C-q}
+ If @code{vc-suppress-confirm} is non-@code{nil}, then @kbd{C-x v v}
and @kbd{C-x v i} can save the current buffer without asking, and
@kbd{C-x v u} also operates without asking for confirmation. (This
variable does not affect @kbd{C-x v c}; that operation is so drastic
users, but there is a mode called @dfn{non-strict locking} in which
you can check-in changes without locking the file first. Use
@samp{rcs -U} to switch to non-strict locking for a particular file,
-see the @code{rcs} manpage for details.
+see the @code{rcs} manual page for details.
When deducing the version control state of an RCS file, VC first
looks for an RCS version header string in the file (@pxref{Version
For one thing, you can set the @env{CVSREAD} environment variable
(the value you use makes no difference). If this variable is defined,
CVS makes your work files read-only by default. In Emacs, you must
-type @kbd{C-x C-q} to make the file writeable, so that editing works
+type @kbd{C-x v v} to make the file writable, so that editing works
in fact similar as if locking was used. Note however, that no actual
-locking is performed, so several users can make their files writeable
+locking is performed, so several users can make their files writable
at the same time. When setting @env{CVSREAD} for the first time, make
sure to check out all your modules anew, so that the file protections
are set correctly.
@cindex watching files (CVS)
Another way to achieve something similar to locking is to use the
@dfn{watch} feature of CVS. If a file is being watched, CVS makes it
-read-only by default, and you must also use @kbd{C-x C-q} in Emacs to
-make it writable. VC calls @code{cvs edit} to make the file writeable,
+read-only by default, and you must also use @kbd{C-x v v} in Emacs to
+make it writable. VC calls @code{cvs edit} to make the file writable,
and CVS takes care to notify other developers of the fact that you
intend to change the file. See the CVS documentation for details on
using the watch feature.
pick up any recent changes from the repository first, using @kbd{C-x v m
@key{RET}}, @pxref{Merging}).
+@vindex vc-cvs-global-switches
+ The variable @code{vc-cvs-global-switches} should be a string
+specifying switches to pass to CVS for all CVS operations.
+
When @code{vc-cvs-stay-local} is @code{t}, VC also makes local
version backups, so that simple diff and revert operations are
completely local (@pxref{Version Backups}).
repositories. It also does not make any version backups.
You can also set @code{vc-cvs-stay-local} to a regular expression
-that is matched against the repository hostname; VC then stays local
+that is matched against the repository host name; VC then stays local
only for repositories from hosts that match the pattern.
@node Directories
C-x C-d /u2/emacs/src/*.c @key{RET}
@end example
- Normally, @kbd{C-x C-d} prints a brief directory listing containing
+ Normally, @kbd{C-x C-d} displays a brief directory listing containing
just file names. A numeric argument (regardless of value) tells it to
make a verbose listing including sizes, dates, and owners (like
@samp{ls -l}).
@vindex list-directory-brief-switches
@vindex list-directory-verbose-switches
- The text of a directory listing is obtained by running @code{ls} in an
-inferior process. Two Emacs variables control the switches passed to
-@code{ls}: @code{list-directory-brief-switches} is a string giving the
-switches to use in brief listings (@code{"-CF"} by default), and
-@code{list-directory-verbose-switches} is a string giving the switches to
-use in a verbose listing (@code{"-l"} by default).
+ The text of a directory listing is mostly obtained by running
+@code{ls} in an inferior process. Two Emacs variables control the
+switches passed to @code{ls}: @code{list-directory-brief-switches} is
+a string giving the switches to use in brief listings (@code{"-CF"} by
+default), and @code{list-directory-verbose-switches} is a string
+giving the switches to use in a verbose listing (@code{"-l"} by
+default).
+
+@vindex directory-free-space-program
+@vindex directory-free-space-args
+ Emacs adds information about the amount of free space on the disk
+that contains the directory. To do this, it runs the program
+specified by @code{directory-free-space-program} with arguments
+@code{directory-free-space-args}.
@node Comparing Files
@section Comparing Files
@findex diff
@vindex diff-switches
The command @kbd{M-x diff} compares two files, displaying the
-differences in an Emacs buffer named @samp{*diff*}. It works by running
-the @code{diff} program, using options taken from the variable
-@code{diff-switches}, whose value should be a string.
+differences in an Emacs buffer named @samp{*diff*}. It works by
+running the @code{diff} program, using options taken from the variable
+@code{diff-switches}. The value of @code{diff-switches} should be a
+string; the default is @code{"-c"} to specify a context diff.
The buffer @samp{*diff*} has Compilation mode as its major mode, so
you can use @kbd{C-x `} to visit successive changed locations in the two
A related command, @kbd{M-x view-buffer}, views a buffer already present
in Emacs. @xref{Misc Buffer}.
+@kindex C-x i
@findex insert-file
- @kbd{M-x insert-file} inserts a copy of the contents of the specified
-file into the current buffer at point, leaving point unchanged before the
-contents and the mark after them.
+ @kbd{M-x insert-file} (also @kbd{C-x i}) inserts a copy of the
+contents of the specified file into the current buffer at point,
+leaving point unchanged before the contents and the mark after them.
@findex write-region
@kbd{M-x write-region} is the inverse of @kbd{M-x insert-file}; it
@findex rename-file
@kbd{M-x rename-file} reads two file names @var{old} and @var{new} using
-the minibuffer, then renames file @var{old} as @var{new}. If a file named
+the minibuffer, then renames file @var{old} as @var{new}. If the file name
@var{new} already exists, you must confirm with @kbd{yes} or renaming is not
done; this is because renaming causes the old meaning of the name @var{new}
to be lost. If @var{old} and @var{new} are on different file systems, the
file @var{old} is copied and deleted.
@findex add-name-to-file
+@cindex hard links (creation)
The similar command @kbd{M-x add-name-to-file} is used to add an
additional name to an existing file without removing its old name.
+The new name is created as a ``hard link'' to the existing file.
The new name must belong on the same file system that the file is on.
On Windows, this command works only if the file resides in an NTFS
file system. On MS-DOS, it works by copying the file.
the old contents of the file @var{new}.
@findex make-symbolic-link
+@cindex symbolic links (creation)
@kbd{M-x make-symbolic-link} reads two file names @var{target} and
-@var{linkname}, then creates a symbolic link named @var{linkname} and
-pointing at @var{target}. The effect is that future attempts to open file
+@var{linkname}, then creates a symbolic link named @var{linkname}, which
+points at @var{target}. The effect is that future attempts to open file
@var{linkname} will refer to whatever file is named @var{target} at the
time the opening is done, or will get an error if the name @var{target} is
not in use at that time. This command does not expand the argument
the programs @code{arc}, @code{jar}, @code{lzh}, @code{zip}, and
@code{zoo}, which have extensions corresponding to the program names.
- The keybindings of Archive mode are similar to those in Tar mode,
+ The key bindings of Archive mode are similar to those in Tar mode,
with the addition of the @kbd{m} key which marks a file for subsequent
operations, and @kbd{M-@key{DEL}} which unmarks all the marked files.
Also, the @kbd{a} key toggles the display of detailed file
@node Remote Files
@section Remote Files
+@cindex Tramp
@cindex FTP
@cindex remote file access
- You can refer to files on other machines using a special file name syntax:
+ You can refer to files on other machines using a special file name
+syntax:
@example
@group
/@var{host}:@var{filename}
/@var{user}@@@var{host}:@var{filename}
/@var{user}@@@var{host}#@var{port}:@var{filename}
+/@var{method}:@var{user}@@@var{host}:@var{filename}
+/@var{method}:@var{user}@@@var{host}#@var{port}:@var{filename}
@end group
@end example
@noindent
-When you do this, Emacs uses the FTP program to read and write files on
-the specified host. It logs in through FTP using your user name or the
-name @var{user}. It may ask you for a password from time to time; this
-is used for logging in on @var{host}. The form using @var{port} allows
-you to access servers running on a non-default TCP port.
+When you do this, Emacs may use the FTP program to access files on the
+remote host, or Emacs may use a remote-login program (such as
+@command{ssh}, @command{rlogin}, or @command{telnet}) to do this.
+
+You can always specify in the file name which method should be used to
+access the remote files, for example
+@file{/ftp:@var{user}@@@var{host}:@var{filename}} uses FTP, whereas
+@file{/ssh:@var{user}@@@var{host}:@var{filename}} uses @command{ssh}.
+When you don't specify a method in the file name, Emacs determines a
+default method according to the following rules:
+
+@enumerate
+@item
+If the host name starts with @samp{ftp.} (with dot), then Emacs assumes
+the @command{ftp} method.
+@item
+If the user name is @samp{ftp} or @samp{anonymous}, then Emacs assumes
+the @command{ftp} method.
+@item
+Otherwise, Emacs assumes the @command{ssh} method.
+@end enumerate
+
+@noindent
+Remote file access through FTP is handled by the Ange-FTP package, which
+is documented in the following. Remote file access through the other
+methods is handled by the Tramp package, which has its own manual.
+@xref{Top, The Tramp Manual,, tramp, The Tramp Manual}.
+
+When the Ange-FTP package is used, Emacs logs in through FTP using your
+user name or the name @var{user}. It may ask you for a password from
+time to time; this is used for logging in on @var{host}. The form using
+@var{port} allows you to access servers running on a non-default TCP
+port.
@cindex backups for remote files
@vindex ange-ftp-make-backup-files
If you want to disable backups for remote files, set the variable
@code{ange-ftp-make-backup-files} to @code{nil}.
+ By default, the auto-save files (@pxref{Auto Save Files}) for remote
+files are made in the temporary file directory on the local machine.
+This is achieved using the variable @code{auto-save-file-name-transforms}.
+
@cindex ange-ftp
@vindex ange-ftp-default-user
@cindex user name for remote file access
character for a user's home directory. For example, @file{/:/tmp/~hack}
refers to a file whose name is @file{~hack} in directory @file{/tmp}.
- Likewise, quoting with @samp{/:} is one way to enter in the minibuffer
-a file name that contains @samp{$}. However, the @samp{/:} must be at
-the beginning of the minibuffer in order to quote @samp{$}.
+ Quoting with @samp{/:} is also a way to enter in the minibuffer a
+file name that contains @samp{$}. In order for this to work, the
+@samp{/:} must be at the beginning of the minibuffer contents. (You
+can also double each @samp{$}; see @ref{File Names with $}.)
You can also quote wildcard characters with @samp{/:}, for visiting.
-For example, @file{/:/tmp/foo*bar} visits the file @file{/tmp/foo*bar}.
-However, in most cases you can simply type the wildcard characters for
-themselves. For example, if the only file name in @file{/tmp} that
-starts with @samp{foo} and ends with @samp{bar} is @file{foo*bar}, then
-specifying @file{/tmp/foo*bar} will visit just @file{/tmp/foo*bar}.
-Another way is to specify @file{/tmp/foo[*]bar}.
+For example, @file{/:/tmp/foo*bar} visits the file
+@file{/tmp/foo*bar}.
+
+ Another method of getting the same result is to enter
+@file{/tmp/foo[*]bar}, which is a wildcard specification that matches
+only @file{/tmp/foo*bar}. However, in many cases there is no need to
+quote the wildcard characters because even unquoted they give the
+right result. For example, if the only file name in @file{/tmp} that
+starts with @samp{foo} and ends with @samp{bar} is @file{foo*bar},
+then specifying @file{/tmp/foo*bar} will visit only
+@file{/tmp/foo*bar}.
@node File Name Cache
@section File Name Cache
point. Partial Completion mode offers other features extending
@code{find-file}, which can be used with @code{ffap}.
@xref{Completion Options}.
+
+@ignore
+ arch-tag: 768d32cb-e15a-4cc1-b7bf-62c00ee12250
+@end ignore