#include <sys/file.h>
#include <errno.h>
#include <limits.h> /* For CHAR_BIT. */
-#include <setjmp.h>
+#include <stat-time.h>
#include "lisp.h"
#include "intervals.h"
#include "character.h"
#include "msdos.h"
#endif
+#ifdef HAVE_NS
+#include "nsterm.h"
+#endif
+
#include <unistd.h>
-#include <math.h>
#ifdef HAVE_SETLOCALE
#include <locale.h>
Lisp_Object Qbackquote, Qcomma, Qcomma_at, Qcomma_dot, Qfunction;
static Lisp_Object Qinhibit_file_name_operation;
static Lisp_Object Qeval_buffer_list;
-static Lisp_Object Qlexical_binding;
+Lisp_Object Qlexical_binding;
static Lisp_Object Qfile_truename, Qdo_after_load_evaluation; /* ACM 2006/5/16 */
/* Used instead of Qget_file_char while loading *.elc files compiled
static Lisp_Object Qload_force_doc_strings;
-extern Lisp_Object Qinternal_interpreter_environment;
-
static Lisp_Object Qload_in_progress;
/* The association list of objects read with the #n=object form.
Lisp_Object, Lisp_Object);
static Lisp_Object load_unwind (Lisp_Object);
static Lisp_Object load_descriptor_unwind (Lisp_Object);
-
-static void invalid_syntax (const char *) NO_RETURN;
-static void end_of_file_error (void) NO_RETURN;
-
\f
/* Functions that read one byte from the current source READCHARFUN
or unreads one byte. If the integer argument C is -1, it returns
static int unread_char;
static int
-readchar (Lisp_Object readcharfun, int *multibyte)
+readchar (Lisp_Object readcharfun, bool *multibyte)
{
Lisp_Object tem;
register int c;
{
if (load_each_byte)
{
- BLOCK_INPUT;
+ block_input ();
ungetc (c, instream);
- UNBLOCK_INPUT;
+ unblock_input ();
}
else
unread_char = c;
{
if (c >= 0)
{
- BLOCK_INPUT;
+ block_input ();
ungetc (c, instream);
- UNBLOCK_INPUT;
+ unblock_input ();
return 0;
}
- BLOCK_INPUT;
+ block_input ();
c = getc (instream);
#ifdef EINTR
/* Interrupted reads have been observed while reading over the network. */
while (c == EOF && ferror (instream) && errno == EINTR)
{
- UNBLOCK_INPUT;
+ unblock_input ();
QUIT;
- BLOCK_INPUT;
+ block_input ();
clearerr (instream);
c = getc (instream);
}
#endif
- UNBLOCK_INPUT;
+ unblock_input ();
return (c == EOF ? -1 : c);
}
/* Compute timeout. */
if (NUMBERP (seconds))
{
- EMACS_TIME wait_time;
- int sec, usec;
double duration = extract_float (seconds);
-
- if (0 < duration)
- duration_to_sec_usec (duration, &sec, &usec);
- else
- sec = usec = 0;
-
- EMACS_GET_TIME (end_time);
- EMACS_SET_SECS_USECS (wait_time, sec, usec);
- EMACS_ADD_TIME (end_time, end_time, wait_time);
+ EMACS_TIME wait_time = EMACS_TIME_FROM_DOUBLE (duration);
+ end_time = add_emacs_time (current_emacs_time (), wait_time);
}
/* Read until we get an acceptable event. */
(void)
{
register Lisp_Object val;
- BLOCK_INPUT;
+ block_input ();
XSETINT (val, getc (instream));
- UNBLOCK_INPUT;
+ unblock_input ();
return val;
}
if (i >= nbytes
|| fast_c_string_match_ignore_case (Vbytecomp_version_regexp,
- buf + i) < 0)
+ buf + i, nbytes - i) < 0)
safe_p = 0;
}
if (safe_p)
SSET (efound, SBYTES (efound) - 1, 'c');
}
- if (result == 0 && s1.st_mtime < s2.st_mtime)
+ if (result == 0
+ && EMACS_TIME_LT (get_stat_mtime (&s1), get_stat_mtime (&s2)))
{
/* Make the progress messages mention that source is newer. */
newer = 1;
FILE *stream = (FILE *) XSAVE_VALUE (arg)->pointer;
if (stream != NULL)
{
- BLOCK_INPUT;
+ block_input ();
fclose (stream);
- UNBLOCK_INPUT;
+ unblock_input ();
}
return Qnil;
}
this path element/specified file name and any possible suffix. */
want_length = max_suffix_len + SBYTES (filename);
if (fn_size <= want_length)
- fn = (char *) alloca (fn_size = 100 + want_length);
+ fn = alloca (fn_size = 100 + want_length);
/* Loop over suffixes. */
for (tail = NILP (suffixes) ? Fcons (empty_unibyte_string, Qnil) : suffixes;
CONSP (tail); tail = XCDR (tail))
{
- ptrdiff_t lsuffix = SBYTES (XCAR (tail));
+ ptrdiff_t fnlen, lsuffix = SBYTES (XCAR (tail));
Lisp_Object handler;
int exists;
/* Concatenate path element/specified name with the suffix.
If the directory starts with /:, remove that. */
- if (SCHARS (filename) > 2
- && SREF (filename, 0) == '/'
- && SREF (filename, 1) == ':')
- {
- strncpy (fn, SSDATA (filename) + 2,
- SBYTES (filename) - 2);
- fn[SBYTES (filename) - 2] = 0;
- }
- else
- {
- strncpy (fn, SSDATA (filename),
- SBYTES (filename));
- fn[SBYTES (filename)] = 0;
- }
-
- if (lsuffix != 0) /* Bug happens on CCI if lsuffix is 0. */
- strncat (fn, SSDATA (XCAR (tail)), lsuffix);
-
+ int prefixlen = ((SCHARS (filename) > 2
+ && SREF (filename, 0) == '/'
+ && SREF (filename, 1) == ':')
+ ? 2 : 0);
+ fnlen = SBYTES (filename) - prefixlen;
+ memcpy (fn, SDATA (filename) + prefixlen, fnlen);
+ memcpy (fn + fnlen, SDATA (XCAR (tail)), lsuffix + 1);
+ fnlen += lsuffix;
/* Check that the file exists and is not a directory. */
/* We used to only check for handlers on non-absolute file names:
if (absolute)
handler = Ffind_file_name_handler (filename, Qfile_exists_p);
It's not clear why that was the case and it breaks things like
(load "/bar.el") where the file is actually "/bar.el.gz". */
- string = build_string (fn);
+ string = make_string (fn, fnlen);
handler = Ffind_file_name_handler (string, Qfile_exists_p);
if ((!NILP (handler) || !NILP (predicate)) && !NATNUMP (predicate))
{
/* Signal an `end-of-file' error, if possible with file name
information. */
-static void
+static _Noreturn void
end_of_file_error (void)
{
if (STRINGP (Vload_file_name))
int whole_buffer = 0;
/* 1 on the first time around. */
int first_sexp = 1;
+ Lisp_Object macroexpand = intern ("internal-macroexpand-for-load");
+
+ if (NILP (Ffboundp (macroexpand))
+ /* Don't macroexpand in .elc files, since it should have been done
+ already. We actually don't know whether we're in a .elc file or not,
+ so we use circumstancial evidence: .el files normally go through
+ Vload_source_file_function -> load-with-code-conversion
+ -> eval-buffer. */
+ || EQ (readcharfun, Qget_file_char)
+ || EQ (readcharfun, Qget_emacs_mule_file_char))
+ macroexpand = Qnil;
if (MARKERP (readcharfun))
{
/* We assume START is nil when input is not from a buffer. */
if (! NILP (start) && !b)
- abort ();
+ emacs_abort ();
specbind (Qstandard_input, readcharfun); /* GCPROs readcharfun. */
specbind (Qcurrent_load_list, Qnil);
{
ptrdiff_t count1 = SPECPDL_INDEX ();
- if (b != 0 && NILP (BVAR (b, name)))
+ if (b != 0 && !BUFFER_LIVE_P (b))
error ("Reading from killed buffer");
if (!NILP (start))
unbind_to (count1, Qnil);
/* Now eval what we just read. */
+ if (!NILP (macroexpand))
+ val = call1 (macroexpand, val);
val = eval_sub (val);
if (printflag)
/* Signal Qinvalid_read_syntax error.
S is error string of length N (if > 0) */
-static void
+static _Noreturn void
invalid_syntax (const char *s)
{
xsignal1 (Qinvalid_read_syntax, build_string (s));
static Lisp_Object
read1 (register Lisp_Object readcharfun, int *pch, int first_in_list)
{
- register int c;
- unsigned uninterned_symbol = 0;
- int multibyte;
+ int c;
+ bool uninterned_symbol = 0;
+ bool multibyte;
*pch = 0;
load_each_byte = 0;
if (saved_doc_string_size == 0)
{
- saved_doc_string = (char *) xmalloc (nskip + extra);
+ saved_doc_string = xmalloc (nskip + extra);
saved_doc_string_size = nskip + extra;
}
if (nskip > saved_doc_string_size)
{
- saved_doc_string = (char *) xrealloc (saved_doc_string,
- nskip + extra);
+ saved_doc_string = xrealloc (saved_doc_string, nskip + extra);
saved_doc_string_size = nskip + extra;
}
/* No symbol character follows, this is the empty
symbol. */
UNREAD (c);
- return Fmake_symbol (build_string (""));
+ return Fmake_symbol (empty_unibyte_string);
}
goto read_symbol;
}
/* ## is the empty symbol. */
if (c == '#')
- return Fintern (build_string (""), Qnil);
+ return Fintern (empty_unibyte_string, Qnil);
/* Reader forms that can reuse previously read objects. */
if (c >= '0' && c <= '9')
{
ptrdiff_t offset = p - read_buffer;
if (min (PTRDIFF_MAX, SIZE_MAX) / 2 < read_buffer_size)
memory_full (SIZE_MAX);
- read_buffer = (char *) xrealloc (read_buffer,
- read_buffer_size * 2);
+ read_buffer = xrealloc (read_buffer, read_buffer_size * 2);
read_buffer_size *= 2;
p = read_buffer + offset;
end = read_buffer + read_buffer_size;
ptrdiff_t offset = p - read_buffer;
if (min (PTRDIFF_MAX, SIZE_MAX) / 2 < read_buffer_size)
memory_full (SIZE_MAX);
- read_buffer = (char *) xrealloc (read_buffer,
- read_buffer_size * 2);
+ read_buffer = xrealloc (read_buffer, read_buffer_size * 2);
read_buffer_size *= 2;
p = read_buffer + offset;
end = read_buffer + read_buffer_size;
ptrdiff_t offset = p - read_buffer;
if (min (PTRDIFF_MAX, SIZE_MAX) / 2 < read_buffer_size)
memory_full (SIZE_MAX);
- read_buffer = (char *) xrealloc (read_buffer,
- read_buffer_size * 2);
+ read_buffer = xrealloc (read_buffer, read_buffer_size * 2);
read_buffer_size *= 2;
p = read_buffer + offset;
end = read_buffer + read_buffer_size;
/* Check for text properties in each interval.
substitute_in_interval contains part of the logic. */
- INTERVAL root_interval = STRING_INTERVALS (subtree);
- Lisp_Object arg = Fcons (object, placeholder);
+ INTERVAL root_interval = string_intervals (subtree);
+ Lisp_Object arg = Fcons (object, placeholder);
traverse_intervals_noorder (root_interval,
&substitute_in_interval, arg);
Lisp_Object object = Fcar (arg);
Lisp_Object placeholder = Fcdr (arg);
- SUBSTITUTE (interval->plist, interval->plist = true_value);
+ SUBSTITUTE (interval->plist, set_interval_plist (interval, true_value));
}
\f
/* Delay handling the bytecode slot until we know whether
it is lazily-loaded (we can tell by whether the
constants slot is nil). */
- ptr[COMPILED_CONSTANTS] = item;
+ ASET (vector, COMPILED_CONSTANTS, item);
item = Qnil;
}
else if (i == COMPILED_CONSTANTS)
}
/* Now handle the bytecode slot. */
- ptr[COMPILED_BYTECODE] = bytestr;
+ ASET (vector, COMPILED_BYTECODE, bytestr);
}
else if (i == COMPILED_DOC_STRING
&& STRINGP (item)
item = Fstring_as_multibyte (item);
}
}
- ptr[i] = item;
+ ASET (vector, i, item);
otem = XCONS (tem);
tem = Fcdr (tem);
free_cons (otem);
interned in the current obarray. */
Lisp_Object
-intern (const char *str)
+intern_1 (const char *str, ptrdiff_t len)
{
- Lisp_Object tem;
- ptrdiff_t len = strlen (str);
- Lisp_Object obarray;
+ Lisp_Object obarray = check_obarray (Vobarray);
+ Lisp_Object tem = oblookup (obarray, str, len, len);
- obarray = Vobarray;
- if (!VECTORP (obarray) || ASIZE (obarray) == 0)
- obarray = check_obarray (obarray);
- tem = oblookup (obarray, str, len, len);
- if (SYMBOLP (tem))
- return tem;
- return Fintern (make_string (str, len), obarray);
+ return SYMBOLP (tem) ? tem : Fintern (make_string (str, len), obarray);
}
Lisp_Object
-intern_c_string (const char *str)
+intern_c_string_1 (const char *str, ptrdiff_t len)
{
- Lisp_Object tem;
- ptrdiff_t len = strlen (str);
- Lisp_Object obarray;
+ Lisp_Object obarray = check_obarray (Vobarray);
+ Lisp_Object tem = oblookup (obarray, str, len, len);
- obarray = Vobarray;
- if (!VECTORP (obarray) || ASIZE (obarray) == 0)
- obarray = check_obarray (obarray);
- tem = oblookup (obarray, str, len, len);
if (SYMBOLP (tem))
return tem;
/* Creating a non-pure string from a string literal not
implemented yet. We could just use make_string here and live
with the extra copy. */
- abort ();
+ emacs_abort ();
- return Fintern (make_pure_c_string (str), obarray);
+ return Fintern (make_pure_c_string (str, len), obarray);
}
\f
DEFUN ("intern", Fintern, Sintern, 1, 2, 0,
SET_SYMBOL_VAL (XSYMBOL (sym), sym);
}
- ptr = &XVECTOR (obarray)->contents[XINT (tem)];
+ ptr = aref_addr (obarray, XINT(tem));
if (SYMBOLP (*ptr))
- XSYMBOL (sym)->next = XSYMBOL (*ptr);
+ set_symbol_next (sym, XSYMBOL (*ptr));
else
- XSYMBOL (sym)->next = 0;
+ set_symbol_next (sym, NULL);
*ptr = sym;
return sym;
}
hash = oblookup_last_bucket_number;
- if (EQ (XVECTOR (obarray)->contents[hash], tem))
+ if (EQ (AREF (obarray, hash), tem))
{
if (XSYMBOL (tem)->next)
- XSETSYMBOL (XVECTOR (obarray)->contents[hash], XSYMBOL (tem)->next);
+ {
+ Lisp_Object sym;
+ XSETSYMBOL (sym, XSYMBOL (tem)->next);
+ ASET (obarray, hash, sym);
+ }
else
- XSETINT (XVECTOR (obarray)->contents[hash], 0);
+ ASET (obarray, hash, make_number (0));
}
else
{
Lisp_Object tail, following;
- for (tail = XVECTOR (obarray)->contents[hash];
+ for (tail = AREF (obarray, hash);
XSYMBOL (tail)->next;
tail = following)
{
XSETSYMBOL (following, XSYMBOL (tail)->next);
if (EQ (following, tem))
{
- XSYMBOL (tail)->next = XSYMBOL (following)->next;
+ set_symbol_next (tail, XSYMBOL (following)->next);
break;
}
}
register Lisp_Object tail;
Lisp_Object bucket, tem;
- if (!VECTORP (obarray)
- || (obsize = ASIZE (obarray)) == 0)
- {
- obarray = check_obarray (obarray);
- obsize = ASIZE (obarray);
- }
+ obarray = check_obarray (obarray);
+ obsize = ASIZE (obarray);
+
/* This is sometimes needed in the middle of GC. */
obsize &= ~ARRAY_MARK_FLAG;
hash = hash_string (ptr, size_byte) % obsize;
- bucket = XVECTOR (obarray)->contents[hash];
+ bucket = AREF (obarray, hash);
oblookup_last_bucket_number = hash;
if (EQ (bucket, make_number (0)))
;
CHECK_VECTOR (obarray);
for (i = ASIZE (obarray) - 1; i >= 0; i--)
{
- tail = XVECTOR (obarray)->contents[i];
+ tail = AREF (obarray, i);
if (SYMBOLP (tail))
while (1)
{
initial_obarray = Vobarray;
staticpro (&initial_obarray);
- Qunbound = Fmake_symbol (make_pure_c_string ("unbound"));
+ Qunbound = Fmake_symbol (build_pure_c_string ("unbound"));
/* Set temporary dummy values to Qnil and Vpurify_flag to satisfy the
NILP (Vpurify_flag) check in intern_c_string. */
Qnil = make_number (-1); Vpurify_flag = make_number (1);
/* Fmake_symbol inits fields of new symbols with Qunbound and Qnil,
so those two need to be fixed manually. */
SET_SYMBOL_VAL (XSYMBOL (Qunbound), Qunbound);
- XSYMBOL (Qunbound)->function = Qunbound;
- XSYMBOL (Qunbound)->plist = Qnil;
- /* XSYMBOL (Qnil)->function = Qunbound; */
+ set_symbol_function (Qunbound, Qunbound);
+ set_symbol_plist (Qunbound, Qnil);
SET_SYMBOL_VAL (XSYMBOL (Qnil), Qnil);
XSYMBOL (Qnil)->constant = 1;
XSYMBOL (Qnil)->declared_special = 1;
- XSYMBOL (Qnil)->plist = Qnil;
+ set_symbol_plist (Qnil, Qnil);
Qt = intern_c_string ("t");
SET_SYMBOL_VAL (XSYMBOL (Qt), Qt);
DEFSYM (Qvariable_documentation, "variable-documentation");
- read_buffer = (char *) xmalloc (size);
+ read_buffer = xmalloc (size);
read_buffer_size = size;
}
\f
void
defsubr (struct Lisp_Subr *sname)
{
- Lisp_Object sym;
+ Lisp_Object sym, tem;
sym = intern_c_string (sname->symbol_name);
XSETTYPED_PVECTYPE (sname, size, PVEC_SUBR);
- XSETSUBR (XSYMBOL (sym)->function, sname);
+ XSETSUBR (tem, sname);
+ set_symbol_function (sym, tem);
}
#ifdef NOTDEF /* Use fset in subr.el now! */
nil if address contains 0. */
void
defvar_bool (struct Lisp_Boolfwd *b_fwd,
- const char *namestring, int *address)
+ const char *namestring, bool *address)
{
Lisp_Object sym;
sym = intern_c_string (namestring);
SET_SYMBOL_FWD (XSYMBOL (sym), (union Lisp_Fwd *)ko_fwd);
}
\f
+/* Check that the elements of Vload_path exist. */
+
+static void
+load_path_check (void)
+{
+ Lisp_Object path_tail;
+
+ /* The only elements that might not exist are those from
+ PATH_LOADSEARCH, EMACSLOADPATH. Anything else is only added if
+ it exists. */
+ for (path_tail = Vload_path; !NILP (path_tail); path_tail = XCDR (path_tail))
+ {
+ Lisp_Object dirfile;
+ dirfile = Fcar (path_tail);
+ if (STRINGP (dirfile))
+ {
+ dirfile = Fdirectory_file_name (dirfile);
+ if (access (SSDATA (dirfile), 0) < 0)
+ dir_warning ("Warning: Lisp directory `%s' does not exist.\n",
+ XCAR (path_tail));
+ }
+ }
+}
+
/* Record the value of load-path used at the start of dumping
so we can see if the site changed it later during dumping. */
static Lisp_Object dump_path;
+/* Compute the default Vload_path, with the following logic:
+ If CANNOT_DUMP:
+ use EMACSLOADPATH env-var if set; otherwise use PATH_LOADSEARCH,
+ prepending PATH_SITELOADSEARCH unless --no-site-lisp.
+ The remainder is what happens when dumping works:
+ If purify-flag (ie dumping) just use PATH_DUMPLOADSEARCH.
+ Otherwise use EMACSLOADPATH if set, else PATH_LOADSEARCH.
+
+ If !initialized, then just set both Vload_path and dump_path.
+ If initialized, then if Vload_path != dump_path, do nothing.
+ (Presumably the load-path has already been changed by something.
+ This can only be from a site-load file during dumping,
+ or because EMACSLOADPATH is set.)
+ If Vinstallation_directory is not nil (ie, running uninstalled):
+ If installation-dir/lisp exists and not already a member,
+ we must be running uninstalled. Reset the load-path
+ to just installation-dir/lisp. (The default PATH_LOADSEARCH
+ refers to the eventual installation directories. Since we
+ are not yet installed, we should not use them, even if they exist.)
+ If installation-dir/lisp does not exist, just add dump_path at the
+ end instead.
+ Add installation-dir/leim (if exists and not already a member) at the front.
+ Add installation-dir/site-lisp (if !no_site_lisp, and exists
+ and not already a member) at the front.
+ If installation-dir != source-dir (ie running an uninstalled,
+ out-of-tree build) AND install-dir/src/Makefile exists BUT
+ install-dir/src/Makefile.in does NOT exist (this is a sanity
+ check), then repeat the above steps for source-dir/lisp,
+ leim and site-lisp.
+ Finally, add the site-lisp directories at the front (if !no_site_lisp).
+*/
+
void
init_lread (void)
{
const char *normal;
- int turn_off_warning = 0;
-
- /* Compute the default Vload-path, with the following logic:
- If CANNOT_DUMP just use PATH_LOADSEARCH.
- Else if purify-flag (ie dumping) start from PATH_DUMPLOADSEARCH;
- otherwise start from PATH_LOADSEARCH.
- If !initialized, then just set both Vload_path and dump_path.
- If initialized, then if Vload_path != dump_path, do nothing.
- (Presumably the load-path has already been changed by something.)
- Also do nothing if Vinstallation_directory is nil.
- Otherwise:
- Remove site-lisp directories from the front of load-path.
- Add installation-dir/lisp (if exists and not already a member),
- at the front, and turn off warnings about missing directories
- (because we are presumably running uninstalled).
- If it does not exist, add dump_path at the end instead.
- Add installation-dir/leim (if exists and not already a member)
- at the front.
- Add installation-dir/site-lisp (if !no_site_lisp, and exists
- and not already a member) at the front.
- If installation-dir != source-dir (ie running an uninstalled,
- out-of-tree build) AND install-dir/src/Makefile exists BUT
- install-dir/src/Makefile.in does NOT exist (this is a sanity
- check), then repeat the above steps for source-dir/lisp,
- leim and site-lisp.
- Finally, add the previously removed site-lisp directories back
- at the front (if !no_site_lisp).
-
- We then warn about any of the load-path elements that do not
- exist. The only ones that might not exist are those from
- PATH_LOADSEARCH, and perhaps dump_path.
-
- Having done all this, we then throw it all away if purify-flag is
- nil (ie, not dumping) and EMACSLOADPATH is set, and just
- unconditionally use the latter value instead.
- So AFAICS the only net results of all the previous steps will be
- possibly to issue some irrelevant warnings.
-
- FIXME? There's a case for saying that if we are running
- uninstalled, the eventual installation directories should not yet
- be included in load-path.
- */
+
#ifdef CANNOT_DUMP
+#ifdef HAVE_NS
+ const char *loadpath = ns_load_path ();
+#endif
+
normal = PATH_LOADSEARCH;
- Vload_path = decode_env_path (0, normal);
+#ifdef HAVE_NS
+ Vload_path = decode_env_path ("EMACSLOADPATH", loadpath ? loadpath : normal);
#else
+ Vload_path = decode_env_path ("EMACSLOADPATH", normal);
+#endif
+
+ load_path_check ();
+
+ /* FIXME CANNOT_DUMP platforms should get source-dir/lisp etc added
+ to their load-path too, AFAICS. I don't think we can tell the
+ difference between initialized and !initialized in this case,
+ so we'll have to do it unconditionally when Vinstallation_directory
+ is non-nil. */
+ if (!no_site_lisp && !egetenv ("EMACSLOADPATH"))
+ {
+ Lisp_Object sitelisp;
+ sitelisp = decode_env_path (0, PATH_SITELOADSEARCH);
+ if (! NILP (sitelisp)) Vload_path = nconc2 (sitelisp, Vload_path);
+ }
+#else /* !CANNOT_DUMP */
if (NILP (Vpurify_flag))
- normal = PATH_LOADSEARCH;
+ {
+ normal = PATH_LOADSEARCH;
+ /* If the EMACSLOADPATH environment variable is set, use its value.
+ This doesn't apply if we're dumping. */
+ if (egetenv ("EMACSLOADPATH"))
+ Vload_path = decode_env_path ("EMACSLOADPATH", normal);
+ }
else
normal = PATH_DUMPLOADSEARCH;
the source directory, instead of the path of the installed elisp
libraries. However, if it appears that Vload_path has already been
changed from the default that was saved before dumping, don't
- change it further. */
+ change it further. Changes can only be due to EMACSLOADPATH, or
+ site-lisp files that were processed during dumping. */
if (initialized)
{
- if (! NILP (Fequal (dump_path, Vload_path)))
+ if (NILP (Fequal (dump_path, Vload_path)))
+ {
+ /* Do not make any changes, just check the elements exist. */
+ /* Note: --no-site-lisp is ignored.
+ I don't know what to do about this. */
+ load_path_check ();
+ }
+ else
{
+#ifdef HAVE_NS
+ const char *loadpath = ns_load_path ();
+ Vload_path = decode_env_path (0, loadpath ? loadpath : normal);
+#else
Vload_path = decode_env_path (0, normal);
- if (no_site_lisp || !NILP (Vinstallation_directory))
+#endif
+ if (!NILP (Vinstallation_directory))
{
- Lisp_Object tem, tem1, sitelisp;
-
- /* Remove "site-lisp" dirs from front of path temporarily
- and store them in sitelisp, then conc them on at the
- end so they're always first in path.
- Note that this won't work if you used a
- --enable-locallisppath element that does not happen
- to contain "site-lisp" in its name.
- */
- sitelisp = Qnil;
- while (1)
- {
- tem = Fcar (Vload_path);
- tem1 = Fstring_match (build_string ("site-lisp"),
- tem, Qnil);
- if (!NILP (tem1))
- {
- Vload_path = Fcdr (Vload_path);
- sitelisp = Fcons (tem, sitelisp);
- }
- else
- break;
- }
-
- if (!NILP (Vinstallation_directory))
- {
- /* Add to the path the lisp subdir of the
- installation dir, if it exists. */
- tem = Fexpand_file_name (build_string ("lisp"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- {
- turn_off_warning = 1;
- Vload_path = Fcons (tem, Vload_path);
- }
- }
- else
- /* That dir doesn't exist, so add the build-time
- Lisp dirs instead. */
- Vload_path = nconc2 (Vload_path, dump_path);
-
- /* Add leim under the installation dir, if it exists. */
- tem = Fexpand_file_name (build_string ("leim"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
-
- /* Add site-lisp under the installation dir, if it exists. */
- if (!no_site_lisp)
- {
- tem = Fexpand_file_name (build_string ("site-lisp"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
- }
-
- /* If Emacs was not built in the source directory,
- and it is run from where it was built, add to load-path
- the lisp, leim and site-lisp dirs under that directory. */
-
- if (NILP (Fequal (Vinstallation_directory, Vsource_directory)))
- {
- Lisp_Object tem2;
-
- tem = Fexpand_file_name (build_string ("src/Makefile"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
-
- /* Don't be fooled if they moved the entire source tree
- AFTER dumping Emacs. If the build directory is indeed
- different from the source dir, src/Makefile.in and
- src/Makefile will not be found together. */
- tem = Fexpand_file_name (build_string ("src/Makefile.in"),
- Vinstallation_directory);
- tem2 = Ffile_exists_p (tem);
- if (!NILP (tem1) && NILP (tem2))
- {
- tem = Fexpand_file_name (build_string ("lisp"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
-
- tem = Fexpand_file_name (build_string ("leim"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
-
- if (!no_site_lisp)
- {
- tem = Fexpand_file_name (build_string ("site-lisp"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
- }
- } /* Vinstallation_directory != Vsource_directory */
- } /* if Vinstallation_directory */
- if (!NILP (sitelisp) && !no_site_lisp)
- Vload_path = nconc2 (Fnreverse (sitelisp), Vload_path);
- } /* if Vinstallation_directory || no_site_lisp */
- } /* if dump_path == Vload_path */
+ Lisp_Object tem, tem1;
+
+ /* Add to the path the lisp subdir of the installation
+ dir, if it exists. Note: in out-of-tree builds,
+ this directory is empty save for Makefile. */
+ tem = Fexpand_file_name (build_string ("lisp"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ {
+ /* We are running uninstalled. The default load-path
+ points to the eventual installed lisp, leim
+ directories. We should not use those now, even
+ if they exist, so start over from a clean slate. */
+ Vload_path = Fcons (tem, Qnil);
+ }
+ }
+ else
+ /* That dir doesn't exist, so add the build-time
+ Lisp dirs instead. */
+ Vload_path = nconc2 (Vload_path, dump_path);
+
+ /* Add leim under the installation dir, if it exists. */
+ tem = Fexpand_file_name (build_string ("leim"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+
+ /* Add site-lisp under the installation dir, if it exists. */
+ if (!no_site_lisp)
+ {
+ tem = Fexpand_file_name (build_string ("site-lisp"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+
+ /* If Emacs was not built in the source directory,
+ and it is run from where it was built, add to load-path
+ the lisp, leim and site-lisp dirs under that directory. */
+
+ if (NILP (Fequal (Vinstallation_directory, Vsource_directory)))
+ {
+ Lisp_Object tem2;
+
+ tem = Fexpand_file_name (build_string ("src/Makefile"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+
+ /* Don't be fooled if they moved the entire source tree
+ AFTER dumping Emacs. If the build directory is indeed
+ different from the source dir, src/Makefile.in and
+ src/Makefile will not be found together. */
+ tem = Fexpand_file_name (build_string ("src/Makefile.in"),
+ Vinstallation_directory);
+ tem2 = Ffile_exists_p (tem);
+ if (!NILP (tem1) && NILP (tem2))
+ {
+ tem = Fexpand_file_name (build_string ("lisp"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+
+ tem = Fexpand_file_name (build_string ("leim"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+
+ if (!no_site_lisp)
+ {
+ tem = Fexpand_file_name (build_string ("site-lisp"),
+ Vsource_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+ }
+ } /* Vinstallation_directory != Vsource_directory */
+
+ } /* if Vinstallation_directory */
+
+ /* Check before adding the site-lisp directories.
+ The install should have created them, but they are not
+ required, so no need to warn if they are absent.
+ Or we might be running before installation. */
+ load_path_check ();
+
+ /* Add the site-lisp directories at the front. */
+ if (!no_site_lisp)
+ {
+ Lisp_Object sitelisp;
+ sitelisp = decode_env_path (0, PATH_SITELOADSEARCH);
+ if (! NILP (sitelisp)) Vload_path = nconc2 (sitelisp, Vload_path);
+ }
+ } /* if dump_path == Vload_path */
}
else /* !initialized */
{
- /* NORMAL refers to the lisp dir in the source directory. */
- /* We used to add ../lisp at the front here, but
- that caused trouble because it was copied from dump_path
- into Vload_path, above, when Vinstallation_directory was non-nil.
- It should be unnecessary. */
+ /* NORMAL refers to PATH_DUMPLOADSEARCH, ie the lisp dir in the
+ source directory. We used to add ../lisp (ie the lisp dir in
+ the build directory) at the front here, but that caused trouble
+ because it was copied from dump_path into Vload_path, above,
+ when Vinstallation_directory was non-nil. It should not be
+ necessary, since in out of tree builds lisp/ is empty, save
+ for Makefile. */
Vload_path = decode_env_path (0, normal);
dump_path = Vload_path;
+ /* No point calling load_path_check; load-path only contains essential
+ elements from the source directory at this point. They cannot
+ be missing unless something went extremely (and improbably)
+ wrong, in which case the build will fail in obvious ways. */
}
-#endif /* CANNOT_DUMP */
-
-#if (!(defined (WINDOWSNT) || (defined (HAVE_NS))))
- /* When Emacs is invoked over network shares on NT, PATH_LOADSEARCH is
- almost never correct, thereby causing a warning to be printed out that
- confuses users. Since PATH_LOADSEARCH is always overridden by the
- EMACSLOADPATH environment variable below, disable the warning on NT. */
-
- /* HAVE_NS also uses EMACSLOADPATH. */
-
- /* Warn if dirs in the *standard* path don't exist. */
- if (!turn_off_warning)
- {
- Lisp_Object path_tail;
-
- for (path_tail = Vload_path;
- !NILP (path_tail);
- path_tail = XCDR (path_tail))
- {
- Lisp_Object dirfile;
- dirfile = Fcar (path_tail);
- if (STRINGP (dirfile))
- {
- dirfile = Fdirectory_file_name (dirfile);
- /* Do we really need to warn about missing site-lisp dirs?
- It's true that the installation should have created
- them and added subdirs.el, but it's harmless if they
- are not there. */
- if (access (SSDATA (dirfile), 0) < 0)
- dir_warning ("Warning: Lisp directory `%s' does not exist.\n",
- XCAR (path_tail));
- }
- }
- }
-#endif /* !(WINDOWSNT || HAVE_NS) */
-
- /* If the EMACSLOADPATH environment variable is set, use its value.
- This doesn't apply if we're dumping. */
-#ifndef CANNOT_DUMP
- if (NILP (Vpurify_flag)
- && egetenv ("EMACSLOADPATH"))
-#endif
- Vload_path = decode_env_path ("EMACSLOADPATH", normal);
+#endif /* !CANNOT_DUMP */
Vvalues = Qnil;
/* Don't log the warning before we've initialized!! */
if (initialized)
{
- char *buffer;
- ptrdiff_t message_len;
USE_SAFE_ALLOCA;
- SAFE_ALLOCA (buffer, char *,
- SBYTES (dirname) + strlen (format) - (sizeof "%s" - 1) + 1);
- message_len = esprintf (buffer, format, SDATA (dirname));
+ char *buffer = SAFE_ALLOCA (SBYTES (dirname)
+ + strlen (format) - (sizeof "%s" - 1) + 1);
+ ptrdiff_t message_len = esprintf (buffer, format, SDATA (dirname));
message_dolog (buffer, message_len, 0, STRING_MULTIBYTE (dirname));
SAFE_FREE ();
}
This list should not include the empty string.
`load' and related functions try to append these suffixes, in order,
to the specified file name if a Lisp suffix is allowed or required. */);
- Vload_suffixes = Fcons (make_pure_c_string (".elc"),
- Fcons (make_pure_c_string (".el"), Qnil));
+ Vload_suffixes = Fcons (build_pure_c_string (".elc"),
+ Fcons (build_pure_c_string (".el"), Qnil));
DEFVAR_LISP ("load-file-rep-suffixes", Vload_file_rep_suffixes,
doc: /* List of suffixes that indicate representations of \
the same file.
When the regular expression matches, the file is considered to be safe
to load. See also `load-dangerous-libraries'. */);
Vbytecomp_version_regexp
- = make_pure_c_string ("^;;;.\\(in Emacs version\\|bytecomp version FSF\\)");
+ = build_pure_c_string ("^;;;.\\(in Emacs version\\|bytecomp version FSF\\)");
- Qlexical_binding = intern ("lexical-binding");
- staticpro (&Qlexical_binding);
+ DEFSYM (Qlexical_binding, "lexical-binding");
DEFVAR_LISP ("lexical-binding", Vlexical_binding,
doc: /* Whether to use lexical binding when evaluating code.
Non-nil means that the code in the current buffer should be evaluated
This variable is automatically set from the file variables of an
interpreted Lisp file read using `load'. Unlike other file local
variables, this must be set in the first line of a file. */);
+ Vlexical_binding = Qnil;
Fmake_variable_buffer_local (Qlexical_binding);
DEFVAR_LISP ("eval-buffer-list", Veval_buffer_list,