EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
-# Subdirectories to make recursively. `lisp' is not included
-# because the compiled lisp files are part of the distribution.
-# leim is not included because it needs special handling.
-#
-# Actually, we now include `lisp' as well, since the compiled files
-# are not included any more in case of bootstrap or in case Emacs was
-# checked out from a VCS.
-SUBDIR = lib lib-src src lisp
+# Subdirectories to make recursively.
+SUBDIR = lib lib-src src lisp leim
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
-all: ${SUBDIR} leim
+all: ${SUBDIR}
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-# For parallel make, src should be built before leim.
-# "export PARALLEL=0" is for SGI's Make, to prevent it from
-# running more than 1 process in the leim directory, especially for
-# the $TIT files there.
-leim: src Makefile FRC
- cd leim && PARALLEL=0 $(MAKE) all $(MFLAGS)
-
lib-src src: lib
src: lib-src FRC
-.RECURSIVE: ${SUBDIR} leim
+.RECURSIVE: ${SUBDIR}
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
-lisp: src
+# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
+# and `leim'.
+lisp leim: src
# Maintainers can put a copy of gnulib into $(gnulib_srcdir).
gnulib_srcdir = ../gnulib
.PHONY: sync-from-gnulib
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp: Makefile FRC
- cd $@; $(MAKE) all $(MFLAGS) \
+lib lib-src lisp leim: Makefile FRC
+ cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-## On AIX, use tar xBf.
-## On Xenix, use tar xpf.
+.PHONY: install
-.PHONY: install mkdir
-
-## We delete each directory in ${COPYDESTS} before we copy into it;
-## that way, we can reinstall over directories that have been put in
-## place with their files read-only (perhaps because they are checked
-## into RCS). In order to make this safe, we make sure that the
-## source exists and is distinct from the destination.
-### We do install-arch-indep first because
-### the executable needs the Lisp files and DOC file to work properly.
-install: all install-arch-indep install-arch-dep install-leim blessmail
+install: all install-arch-indep install-doc install-arch-dep blessmail
@true
## Ensure that $subdir contains a subdirs.el file.
+## Here and elsewhere, we set the umask so that any created files are
+## world-readable.
+## TODO it might be good to warn about non-standard permissions of
+## pre-existing directories, but that does not seem easy.
write_subdir=if [ -f $${subdir}/subdirs.el ]; \
then true; \
else \
fi
### Install the executables that were compiled specifically for this machine.
-### It would be nice to do something for a parallel make
-### to ensure that install-arch-indep finishes before this starts.
-### (TODO Why would it be nice? Why not just make this depend on
-### install-arch-indep then?)
-install-arch-dep: mkdir
+### We do install-arch-indep first because the executable needs the
+### Lisp files and DOC file to work properly.
+install-arch-dep: install-arch-indep install-doc
+ umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
fi
## In the share directory, we are deleting:
-## applications (with emacs.desktop)
-## emacs (basically empty)
+## applications (with emacs.desktop, also found in etc/)
+## emacs (basically empty except for unneeded site-lisp directories)
## icons (duplicates etc/images/icons/hicolor)
-## man (maybe we should be installing this one, like info)
+
+## This is install-etc for everything except self-contained-ns builds.
+## For them, it is empty.
+INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
## Needs to be the user running install, so configure can't set it.
done
### Install the files that are machine-independent.
-### Most of them come straight from the distribution;
-### the exception is the DOC-* files, which are copied
-### from the build directory.
-
-## Note that we copy DOC* and then delete DOC
-## as a workaround for a bug in tar on Ultrix 4.2.
-## Ultrix is no longer supported since 23.1, but the relevant line
-## has another effect. We copy the entire etc/ directory from the
-## source tree first. For an in-tree build, this will include
-## any DOC* files there may be. So rm DOC does have an effect.
-## FIXME When we copy etc we should exclude DOC*, then copy only
-## the relevant one. We cannot delete DOC* from the destination directory,
-## because that may include pre-existing files from another emacs.
+### Most of them come straight from the distribution; the exception is
+### the DOC file, which is copied from the build directory.
-## We install only the relevant DOC file if possible
-## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
-## (Note "otherwise" is inaccurate since 2009-08-23.)
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
-## If people complain about the h flag in tar command, take that out.
-## That flag is also used in leim/Makefile.in
+## We delete etc/DOC* because there may be irrelevant DOC files from
+## other builds in the source directory. This is ok because we just
+## deleted the entire installed etc/ directory and recreated it.
+## install-doc installs the relevant DOC.
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-install-arch-indep: mkdir info install-etc
- -set ${COPYDESTS} ; \
- unset CDPATH; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
- done
+## I'm not sure creating locallisppath here serves any useful purpose.
+## If it has the default value, then the later write_subdir commands
+## will ensure all these components exist.
+## This will only do something if locallisppath has a non-standard value.
+## Is it really Emacs's job to create those directories?
+## Should we also be ensuring they contain subdirs.el files?
+## It would be easy to do, just use write_subdir.
+
+## Note that we use tar instead of plain old cp -R/-r because the latter
+## is apparently not portable (even in 2012!).
+## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
+## I have no idea which platforms Emacs supports where cp -R does not
+## work correctly, and therefore no idea when tar can be replaced.
+## See also these comments from 2004 about cp -r working fine:
+## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
+install-arch-indep: install-leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
+ umask 022 ; \
+ $(MKDIR_P) $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'`
-set ${COPYDESTS} ; \
- mkdir ${COPYDESTS} ; \
- chmod ugo+rx ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
+ [ -d $${dir} ] || exit 1 ; \
dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir} to $${dest}..." ; \
- (cd $${dir}; tar -chf - . ) \
- | (cd $${dest}; umask 022; \
- tar -xvf - && cat > /dev/null) || exit 1; \
- find $${dest} -exec chown $${installuser} {} ';' ;\
- for subdir in `find $${dest} -type d -print` ; do \
- chmod a+rx $${subdir} ; \
- rm -f $${subdir}/.gitignore ; \
- rm -f $${subdir}/.arch-inventory ; \
- rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- [ "$${dir}" != "${srcdir}/etc" ] && \
- rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
- rm -f $${subdir}/ChangeLog* ; \
- done) ; \
+ [ -d $${dest} ] && \
+ [ `(cd $${dest} && /bin/pwd)` = `(cd $${dir} && /bin/pwd)` ] && \
+ continue ; \
+ rm -rf $${dest} ; \
+ umask 022; ${MKDIR_P} $${dest} ; \
+ echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -chf - . ) \
+ | (cd $${dest}; umask 022; \
+ tar -xvf - && cat > /dev/null) || exit 1; \
+ [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
+ for subdir in `find $${dest} -type d -print` ; do \
+ rm -f $${subdir}/.gitignore ; \
+ rm -f $${subdir}/.arch-inventory ; \
+ rm -f $${subdir}/.DS_Store ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ [ "$${dir}" != "${srcdir}/etc" ] && \
+ rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
+ done ; \
+ find $${dest} -exec chown $${installuser} {} ';' ;\
done
-rm -f $(DESTDIR)${lispdir}/subdirs.el
- $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
+ umask 022; $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
${write_subdir}
subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
${write_subdir} || true
+ [ -z "${GZIP_PROG}" ] || \
+ ( echo "Compressing *.el ..." ; \
+ unset CDPATH; \
+ cd $(DESTDIR)${lispdir}; \
+ for f in `find . -name "*.elc" -print`; do \
+ ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
+ done )
+ -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+
+# The last chmod isn't needed at present.
+
+## We install only the relevant DOC file if possible
+## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
+## (Note "otherwise" is inaccurate since 2009-08-23.)
+
+## Note that install-arch-indep deletes and recreates the entire
+## installed etc/ directory, so we need it to run before this does.
+install-doc: install-arch-indep
-unset CDPATH; \
+ umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
then \
fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
fi; \
echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
- (cd $(DESTDIR)$(docdir); \
- $(set_installuser); \
- chown $${installuser} DOC*; \
- if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
- else true; fi
- -unset CDPATH; \
- if [ -n "${GZIP_PROG}" ]; \
- then \
- echo "Compressing *.el ..." ; \
- (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
- ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
- done) \
+ $(set_installuser); \
+ chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
else true; fi
+
+install-info: info
+ umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
-unset CDPATH; \
thisdir=`/bin/pwd`; \
- if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
- then \
+ [ `(cd ${srcdir}/info && /bin/pwd)` = `(cd $(DESTDIR)${infodir} && /bin/pwd)` ] || \
(cd $(DESTDIR)${infodir}; \
- if [ -f dir ]; then true; \
- else \
+ [ -f dir ] || \
(cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
- chmod a+r $(DESTDIR)${infodir}/dir); \
- fi; \
+ ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
- chmod a+r $(DESTDIR)${infodir}/$$f; \
- if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
- rm -f $(DESTDIR)${infodir}/$$f.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
- else true; fi; \
+ ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
+ rm -f $(DESTDIR)${infodir}/$$f.gz; \
+ ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
done; \
(cd $${thisdir}; \
${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- done); \
- else true; fi
- -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+ done)
+
+install-man:
+ umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
(cd $${thisdir}; \
- ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
- chmod a+r $(DESTDIR)${man1dir}/$${page}; \
- if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
- rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
- else true; fi ); \
+ ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \
+ ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
+ rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
+ ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
done
## Install those items from etc/ that need to end up elsewhere.
-install-etc: mkdir
+install-etc:
+ umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
$(DESTDIR)${desktopdir}/emacs.desktop
- for icon in $(iconsrcdir)/*/*/apps/*.* \
- $(iconsrcdir)/*/*/mimetypes/*.*; do \
- if [ -r $${icon} ]; then \
- iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
- ${INSTALL_DATA} $${icon} $${iicon} ; \
- fi ; \
+ thisdir=`/bin/pwd`; \
+ cd ${iconsrcdir} || exit 1; umask 022 ; \
+ for dir in */*/apps */*/mimetypes; do \
+ [ -d $${dir} ] || continue ; \
+ ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
+ for icon in $${dir}/*.*; do \
+ [ -r $${icon} ] || continue ; \
+ ( cd $${thisdir}; \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \
+ || exit 1; \
+ done ; \
done
### Install LEIM files. Although they are machine-independent, we
### have separate target here instead of including it in
### `install-arch-indep'. People who extracted LEIM files after they
### installed Emacs itself can install only LEIM files by this target.
-install-leim: leim/Makefile mkdir
+install-leim: leim/Makefile
cd leim && $(MAKE) $(MFLAGS) install
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
-### Build some of the directories we're going to install Emacs in.
-### We set the umask so that any created directories are world-readable.
-### FIXME it would be good to warn about non-standard permissions of
-### pre-existing directories, but that does not seem easy.
-mkdir: FRC
- icondirs= ; \
- for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
- if [ -d $${dir} ]; then \
- icondirs="$${icondirs} $${dir}" ; \
- fi ; \
- done ; \
- icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
- umask 022 ; \
- $(MKDIR_P) $(DESTDIR)${datadir} ${COPYDESTS} \
- $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
- $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
- $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
- $(DESTDIR)${desktopdir} $${icondirs}
-
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would create).
###
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
- for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
${top_maintainer_clean}
-rm -f config-tmp-*
-rm -f *~ \#*