-# DIST: This is the distribution Makefile for Emacs. configure can
-# DIST: make most of the changes to this file you might want, so try
-# DIST: that first.
+### @configure_input@
-# Copyright (C) 1992-2012 Free Software Foundation, Inc.
+# Copyright (C) 1992-2013 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# clean slate, and then build in the normal way.
+#
+# make docs
+# Make Emacs documentation files from their sources; requires makeinfo.
-SHELL = /bin/sh
+SHELL = @SHELL@
# This may not work with certain non-GNU make's. It only matters when
# inheriting a CDPATH not starting with the current directory.
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
+# Prevent submakes from outputting "Entering directory ..." and
+# "Leaving directory..." diagnostics that would mess up 'make echo-info'.
+QUIET_SUBMAKE = MAKELEVEL=0
+
# ==================== Things `configure' Might Edit ====================
cache_file = @cache_file@
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
+### The nt/ subdirectory gets built only for MinGW
+NTDIR=@NTDIR@
+
# ==================== Where To Install Things ====================
# Location to install Emacs.app under GNUstep / Mac OS X.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
+abs_srcdir=@abs_srcdir@
+# MinGW CPPFLAGS may use this.
+abs_top_srcdir=@abs_top_srcdir@
# Where the manpage source files are kept.
mansrcdir=$(srcdir)/doc/man
# before they've been installed in their final location.
# This should be a colon-separated list of directories.
# Normally it points to the lisp/ directory in the sources.
-buildlisppath=${srcdir}/lisp
+buildlisppath=${abs_srcdir}/lisp
# Where to install the other architecture-independent
# data files distributed with Emacs (like the tutorial,
# once.
archlibdir=@archlibdir@
-# Where to put the docstring file.
-docdir=@docdir@
+# Where to put the etc/DOC file.
+etcdocdir=@etcdocdir@
# Where to install Emacs game score files.
gamedir=@gamedir@
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
MKDIR_P = @MKDIR_P@
+# Create a link to a file in the same directory as the target.
+LN_S_FILEONLY = @LN_S_FILEONLY@
# We use gzip to compress installed .el files.
GZIP_PROG = @GZIP_PROG@
-# If non-nil, gzip the installed Info and man pages.
-GZIP_INFO = @GZIP_INFO@
# ============================= Targets ==============================
TRANSFORM = @program_transform_name@
# What emacs should be called when installed.
-EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
-EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
+EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
+EMACS = ${EMACS_NAME}${EXEEXT}
+EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
-SUBDIR = lib lib-src src lisp leim
+SUBDIR = $(NTDIR) lib lib-src src lisp leim
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
-# Subdirectories to install, and where they'll go.
-# lib-src's makefile knows how to install it, so we don't do that here.
-# Directories that cannot simply be copied, eg info,
-# are treated separately.
-# quail appears twice because in out-of-tree builds, it exists twice.
+# Subdirectories to install, and where they'll go. lib-src's and nt's
+# makefiles know how to install them, so we don't do that here.
+# Directories that cannot simply be copied, eg info, are treated
+# separately. quail appears twice because in out-of-tree builds, it
+# exists twice.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
-COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
+COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}/ja-dic" "$(DESTDIR)${leimdir}/quail" "$(DESTDIR)${leimdir}/quail"
all: ${SUBDIR}
-.PHONY: all ${SUBDIR} blessmail epaths-force FRC
+.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
-removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
+removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
# Generate epaths.h from epaths.in. This target is invoked by `configure'.
# See comments in configure.ac for why it is done this way, as opposed
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
-e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
- -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-lib-src src: lib
+# Convert MSYS-style /x/foo or Windows-style x:\foo file names
+# into x:/foo that Windows can grok.
+msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
+
+# Transform directory search path and its components. Original can
+# be MSYS or Windows style. Set path separator to ";", directory
+# separator to "/" and transform MSYS-style "/c/" to "c:/".
+# Remove empty path components and escape semicolons.
+msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
+ -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
+ -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
+ -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
+
+# Replace "${prefix}" with '%emacs_dir%' (which expands to install
+# directory at runtime).
+msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
+
+# Quote Sed special characters (except backslash and newline) with
+# a double backslash.
+msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
+
+# The w32 build needs a slightly different editing, and it uses
+# nt/epaths.nt as the template.
+# Use the value of ${locallisppath} supplied by `configure',
+# to support the --enable-locallisppath argument.
+#
+# When building with MinGW inside the MSYS tree, 'pwd' produces directories
+# relative to the root of the MSYS tree, e.g. '/home/user/foo' instead of
+# '/d/MSYS/home/user/foo'. If such a value of srcdir is written to
+# src/epaths.h, that causes temacs to fail, because, being a MinGW
+# program that knows nothing of MSYS root substitution, it cannot find
+# the data directory. "pwd -W" produces Windows-style 'd:/foo/bar'
+# absolute directory names, so we use it here to countermand that lossage.
+epaths-force-w32: FRC
+ @(w32srcdir=`cd "${srcdir}"; pwd -W | sed -e 's,^\([A-Za-z]\):,/\1,' | ${msys_to_w32}` ; \
+ prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
+ locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
+ sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
+ -e '/^.*#/s/@VER@/${version}/g' \
+ -e '/^.*#/s/@CFG@/${configuration}/g' \
+ -e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
+ ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
+
+# If lib/Makefile would build files in '.', then build them before
+# building 'lib', to avoid races with parallel makes.
+lib: am--refresh
-src: lib-src FRC
+lib-src src: $(NTDIR) lib
+
+src: lib-src
# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
# and `leim'.
lisp leim: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp leim: Makefile FRC
+lib lib-src lisp leim nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
# all preloaded elisp files, and only then dump the actual src/emacs, which
# is not wrong, but is overkill in 99.99% of the cases.
src: Makefile FRC
- boot=bootstrap-emacs$(EXEEXT); \
- if [ ! -x "src/$$boot" ]; then \
- cd $@; $(MAKE) all $(MFLAGS) \
- CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
- LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
- fi;
- if [ -r .bzr/checkout/dirstate ]; then \
- vcswitness="`pwd`/.bzr/checkout/dirstate"; \
- fi; \
- cd $@; $(MAKE) all $(MFLAGS) \
- CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
- LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
+ dirstate='.bzr/checkout/dirstate'; \
+ vcswitness='$$(srcdir)/../'$$dirstate; \
+ [ -r "$(srcdir)/$$dirstate" ] || vcswitness=''; \
+ cd $@ || exit; \
+ boot=bootstrap-emacs$(EXEEXT); \
+ [ ! -x "$$boot" ] || boot=''; \
+ $(MAKE) all $(MFLAGS) \
+ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
+ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot" \
VCSWITNESS="$$vcswitness"
blessmail: Makefile src FRC
# config.status overrides MAKEFILE_NAME with a bogus name when creating
# src/epaths.h, so that 'make epaths-force' does not recursively invoke
# config.status and overwrite config.status while executing it (Bug#11214).
+#
+# 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
+# then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
+# etc. to be built without running into similar recursion problems.
MAKEFILE_NAME = Makefile
$(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
- $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
- ./config.status
+ $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
+ MAKE='$(MAKE)' ./config.status
-# Don't erase config.status if make is interrupted while refreshing it.
-.PRECIOUS: config.status
+# Don't erase these files if make is interrupted while refreshing them.
+.PRECIOUS: Makefile config.status
config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
if [ -x ./config.status ]; then \
- ./config.status --recheck; \
+ $(CFG) ./config.status --recheck; \
else \
- ./configure $(CONFIGURE_FLAGS); \
+ $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
fi
AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
$(srcdir)/lib/gnulib.mk
$(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
cd $(srcdir) && automake --gnu -a -c lib/Makefile
+
+# Regenerate files that this makefile would have made, if this makefile
+# had been built by Automake. The name 'am--refresh' is for
+# compatibility with subsidiary Automake-generated makefiles.
am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
.PHONY: am--refresh
# ==================== Installation ====================
-.PHONY: install install-arch-dep install-arch-indep install-doc install-info
-.PHONY: install-man install-etc install-strip uninstall
+.PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
+.PHONY: install-man install-etc install-strip install-$(NTDIR)
+.PHONY: uninstall uninstall-$(NTDIR)
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-install: all install-arch-indep install-doc install-arch-dep blessmail
+install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
@true
## Ensure that $subdir contains a subdirs.el file.
## world-readable.
## TODO it might be good to warn about non-standard permissions of
## pre-existing directories, but that does not seem easy.
-write_subdir=if [ -f $${subdir}/subdirs.el ]; \
+write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \
then true; \
else \
umask 022; \
- ${MKDIR_P} $${subdir}; \
+ ${MKDIR_P} "$${subdir}"; \
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $${subdir}/subdirs.el; \
+ > "$${subdir}/subdirs.el"; \
fi
### Install the executables that were compiled specifically for this machine.
### We do install-arch-indep first because the executable needs the
### Lisp files and DOC file to work properly.
-install-arch-dep: install-arch-indep install-doc
- umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
+install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
+ umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
cd lib-src && \
- $(MAKE) install $(MFLAGS) prefix=${prefix} \
- exec_prefix=${exec_prefix} bindir=${bindir} \
- libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ $(MAKE) install $(MFLAGS) prefix="${prefix}" \
+ exec_prefix="${exec_prefix}" bindir="${bindir}" \
+ libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
INSTALL_STRIP=${INSTALL_STRIP}
if test "${ns_self_contained}" = "no"; then \
- ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
- chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
- rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
- ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) || true ; \
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \
+ chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \
+ if test "x${NO_BIN_LINK}" = x; then \
+ rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \
+ cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
+ fi; \
else \
subdir=${ns_appresdir}/site-lisp; \
${write_subdir} || exit 1; \
rm -rf ${ns_appresdir}/share; \
fi
+### Windows-specific install target for installing programs produced
+### in nt/, and its Posix do-nothing shadow.
+install-:
+install-nt:
+ cd $(NTDIR) && \
+ $(MAKE) install $(MFLAGS) prefix="${prefix}" \
+ exec_prefix="${exec_prefix}" bindir="${bindir}" \
+ libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
+ INSTALL_STRIP=${INSTALL_STRIP}
+
## In the share directory, we are deleting:
## applications (with emacs.desktop, also found in etc/)
## emacs (basically empty except for unneeded site-lisp directories)
## We delete etc/DOC* because there may be irrelevant DOC files from
## other builds in the source directory. This is ok because we just
## deleted the entire installed etc/ directory and recreated it.
-## install-doc installs the relevant DOC.
+## install-etcdoc installs the relevant DOC.
+
+## Note that we install etc/refcards/*.ps if present.
+## TODO we should compress these if GZIP_PROG is set.
+## It would be simpler to have a separate install rule for etc/refcards
+## (maybe move it to doc/refcards?).
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-## I'm not sure creating locallisppath here serves any useful purpose.
-## If it has the default value, then the later write_subdir commands
-## will ensure all these components exist.
-## This will only do something if locallisppath has a non-standard value.
-## Is it really Emacs's job to create those directories?
-## Should we also be ensuring they contain subdirs.el files?
-## It would be easy to do, just use write_subdir.
+## We used to create locallisppath, but if it points to non-standard
+## locations, is not really Emacs's job to create these directories,
+## so it is no longer done.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
-install-arch-indep: install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
- umask 022 ; \
- locallisppath='${locallisppath}'; \
- IFS=:; \
- for d in $$locallisppath; do \
- ${MKDIR_P} "$(DESTDIR)$$d"; \
- done
+install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
[ -d $${dir} ] || exit 1 ; \
- dest=$$1 ; shift ; \
- [ -d $${dest} ] && \
- [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
- continue ; \
+ dest="$$1" ; shift ; \
+ if [ -d "$${dest}" ]; then \
+ exp_dest=`cd "$${dest}" && /bin/pwd`; \
+ [ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
+ else true; \
+ fi; \
if [ "$${dir}" = "leim/quail" ]; then \
- [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
+ [ "`cd $${dir} && /bin/pwd`" = "`cd ${srcdir}/leim/quail && /bin/pwd`" ] && \
continue ; \
else \
- rm -rf $${dest} ; \
- umask 022; ${MKDIR_P} $${dest} ; \
+ rm -rf "$${dest}" ; \
+ umask 022; ${MKDIR_P} "$${dest}" ; \
fi ; \
echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -chf - . ) \
- | (cd $${dest}; umask 022; \
+ | (cd "$${dest}"; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
- [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
- for subdir in `find $${dest} -type d -print` ; do \
- rm -f $${subdir}/.gitignore ; \
- rm -f $${subdir}/.arch-inventory ; \
- rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- rm -f $${subdir}/ChangeLog* ; \
- [ "$${dir}" != "${srcdir}/etc" ] && \
- rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
- done ; \
- find $${dest} -exec chown $${installuser} {} ';' ;\
+ if [ "$${dir}" = "${srcdir}/etc" ]; then \
+ rm -f "$${dest}/DOC"* ; \
+ rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \
+ rm -f "$${dest}/refcards"/*.log; \
+ else true; \
+ fi; \
+ (cd "$${dest}" || exit 1; \
+ for subdir in `find . -type d -print` ; do \
+ chmod a+rx $${subdir} ; \
+ rm -f $${subdir}/.gitignore ; \
+ rm -f $${subdir}/.arch-inventory ; \
+ rm -f $${subdir}/.DS_Store ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ [ "$${dir}" != "${srcdir}/etc" ] && \
+ rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
+ done ); \
+ find "$${dest}" -exec chown $${installuser} {} ';' ;\
done
- -rm -f $(DESTDIR)${leimdir}/leim-list.el
- ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
- -rm -f $(DESTDIR)${lispdir}/subdirs.el
- umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
- subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
+ -rm -f "$(DESTDIR)${leimdir}/leim-list.el"
+ ${INSTALL_DATA} leim/leim-list.el "$(DESTDIR)${leimdir}/leim-list.el"
+ -rm -f "$(DESTDIR)${lispdir}/subdirs.el"
+ umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
+ subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
${write_subdir}
- subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
+ subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
${write_subdir} || true
[ -z "${GZIP_PROG}" ] || \
( echo "Compressing *.el ..." ; \
unset CDPATH; \
thisdir=`/bin/pwd`; \
- for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
- cd $${thisdir} ; \
- cd $${dir} || exit 1 ; \
+ for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}"; do \
+ cd "$${thisdir}" ; \
+ cd "$${dir}" || exit 1 ; \
for f in `find . -name "*.elc" -print`; do \
- ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
+ f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \
+ ${GZIP_PROG} -9n "$$f_el" ; \
done ; \
done )
- -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
-
-# The last chmod isn't needed at present.
+ -chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
-## We install only the relevant DOC file if possible
-## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
-## (Note "otherwise" is inaccurate since 2009-08-23.)
+## The above chmods are needed because "umask 022; tar ..." is not
+## guaranteed to do the right thing; eg if we are root and tar is
+## preserving source permissions.
## Note that install-arch-indep deletes and recreates the entire
## installed etc/ directory, so we need it to run before this does.
-install-doc: install-arch-indep
+install-etcdoc: src install-arch-indep
-unset CDPATH; \
- umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
- if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
+ umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
+ exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \
+ if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
then \
- fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
- if [ -f "./etc/DOC-$${fullversion}" ]; \
- then \
- docfile="DOC-$${fullversion}"; \
- else \
- docfile="DOC"; \
- fi; \
- echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
- ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
+ docfile="DOC"; \
+ echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
+ ${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
$(set_installuser); \
- chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
+ chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
else true; fi
install-info: info
- umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
+ umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
-unset CDPATH; \
thisdir=`/bin/pwd`; \
- [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
- (cd $(DESTDIR)${infodir}; \
+ exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \
+ if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
+ true; \
+ else \
+ (cd "$(DESTDIR)${infodir}"; \
[ -f dir ] || \
- (cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
- info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
+ (cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \
+ info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
- (cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
- ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
- rm -f $(DESTDIR)${infodir}/$$f.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
+ (cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \
+ [ -n "${GZIP_PROG}" ] || continue ; \
+ rm -f "$(DESTDIR)${infodir}/$$f.gz"; \
+ ${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \
done; \
- (cd $${thisdir}; \
- ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- done)
+ (cd "$${thisdir}"; \
+ ${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
+ done; \
+ fi
+## "gzip || true" is because some gzips exit with non-zero status
+## if compression would not reduce the file size. Eg, the gzip in
+## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
+## only happen with the tiny ctags.1 manpage. We don't really care if
+## ctags.1 is compressed or not. "gzip -f" is another option here,
+## but not sure if portable.
install-man:
- umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
+ umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}"
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
- (cd $${thisdir}; \
- ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \
- ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
- rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
+ dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
+ (cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
+ [ -n "${GZIP_PROG}" ] || continue ; \
+ rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \
+ ${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \
done
## Install those items from etc/ that need to end up elsewhere.
+
+## If you prefer, choose "emacs22" at installation time.
+## Note: emacs22 does not have all the resolutions.
+EMACS_ICON=emacs
+
install-etc:
- umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
- ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
- $(DESTDIR)${desktopdir}/emacs.desktop
+ umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}"
+ tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
+ emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
+ sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
+ -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
+ ${srcdir}/etc/emacs.desktop > $${tmp}; \
+ ${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \
+ rm -f $${tmp}
thisdir=`/bin/pwd`; \
cd ${iconsrcdir} || exit 1; umask 022 ; \
for dir in */*/apps */*/mimetypes; do \
[ -d $${dir} ] || continue ; \
- ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
- for icon in $${dir}/*.*; do \
+ ( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \
+ for icon in $${dir}/${EMACS_ICON}[.-]*; do \
[ -r $${icon} ] || continue ; \
- ( cd $${thisdir}; \
- ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \
+ ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
+ dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
+ ( cd "$${thisdir}"; \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
|| exit 1; \
done ; \
done
### create (but not the noninstalled files such as `make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
-uninstall:
+uninstall: uninstall-$(NTDIR) uninstall-doc
cd lib-src && \
$(MAKE) $(MFLAGS) uninstall \
- prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+ prefix="${prefix}" exec_prefix="${exec_prefix}" \
+ bindir="${bindir}" libexecdir="${libexecdir}" \
+ archlibdir="${archlibdir}"
+
-unset CDPATH; \
- for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
- if [ -d $${dir} ]; then \
- case `cd $${dir} ; /bin/pwd` in \
- `cd ${srcdir} ; /bin/pwd`* ) ;; \
- * ) rm -rf $${dir} ;; \
+ for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do \
+ if [ -d "$${dir}" ]; then \
+ case `cd "$${dir}" ; /bin/pwd` in \
+ "`cd ${srcdir} ; /bin/pwd`"* ) ;; \
+ * ) rm -rf "$${dir}" ;; \
esac ; \
- case $${dir} in \
- $(DESTDIR)${datadir}/emacs/${version}/* ) \
- rm -rf $(DESTDIR)${datadir}/emacs/${version} \
+ case "$${dir}" in \
+ "$(DESTDIR)${datadir}/emacs/${version}"/* ) \
+ rm -rf "$(DESTDIR)${datadir}/emacs/${version}" \
;; \
esac ; \
fi ; \
done
- -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
+ -rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}"
thisdir=`/bin/pwd`; \
- (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
- cd $(DESTDIR)${infodir} && \
- for elt in ${INFO_NONMISC} $${info_misc}; do \
- (cd $${thisdir}; \
- $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
- ext=.gz; else ext=; fi; \
- rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
- done;)
- (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
+ (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
+ if cd "$(DESTDIR)${infodir}"; then \
+ for elt in ${INFO_NONMISC} $${info_misc}; do \
+ (cd "$${thisdir}"; \
+ $(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
+ if [ -n "${GZIP_PROG}" ]; then \
+ ext=.gz; else ext=; fi; \
+ rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
+ done; \
+ fi)
+ (if [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
- cd ${mansrcdir} && for page in *.1; do \
- rm -f $(DESTDIR)${man1dir}/$$page$$ext; done )
- (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
- (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
- -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
+ if cd ${mansrcdir}; then \
+ for page in *.1; do \
+ rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
+ fi)
+ (cd "$(DESTDIR)${bindir}" && rm -f $(EMACSFULL) $(EMACS) || true)
+ (if cd "$(DESTDIR)${icondir}"; then \
+ rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
+ hicolor/scalable/apps/${EMACS_NAME}.svg \
+ hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
+ fi)
+ -rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"
for file in snake-scores tetris-scores; do \
- file=$(DESTDIR)${gamedir}/$${file}; \
- [ -s $${file} ] || rm -f $$file; \
+ file="$(DESTDIR)${gamedir}/$${file}"; \
+ [ -s "$${file}" ] || rm -f "$$file"; \
done
+### Windows-specific uninstall target for removing programs produced
+### in nt/, and its Posix do-nothing shadow.
+uninstall-:
+uninstall-nt:
+ cd $(NTDIR) && \
+ $(MAKE) $(MFLAGS) uninstall \
+ prefix="${prefix}" exec_prefix="${exec_prefix}" \
+ bindir="${bindir}" libexecdir="${libexecdir}" \
+ archlibdir="${archlibdir}"
+
FRC:
# ==================== Cleaning up and miscellanea ====================
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean: FRC
- (cd src; $(MAKE) $(MFLAGS) mostlyclean)
- (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
- (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
- (cd lib; $(MAKE) $(MFLAGS) mostlyclean)
- (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
- -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
- -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
- -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
- -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean)
- (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
+ cd src && $(MAKE) $(MFLAGS) mostlyclean
+ cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
+ cd lwlib && $(MAKE) $(MFLAGS) mostlyclean
+ cd lib && $(MAKE) $(MFLAGS) mostlyclean
+ cd lib-src && $(MAKE) $(MFLAGS) mostlyclean
+ cd nt && $(MAKE) $(MFLAGS) mostlyclean
+ -cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean
+ -cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean
+ -cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean
+ -cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
+ cd leim && $(MAKE) $(MFLAGS) mostlyclean
### `clean'
### Delete all files from the current directory that are normally
###
### Delete `.dvi' files here if they are not part of the distribution.
clean: FRC
- (cd src; $(MAKE) $(MFLAGS) clean)
- (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
- (cd lwlib; $(MAKE) $(MFLAGS) clean)
- (cd lib; $(MAKE) $(MFLAGS) clean)
- (cd lib-src; $(MAKE) $(MFLAGS) clean)
- -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
- -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
- -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
- -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
- (cd leim; $(MAKE) $(MFLAGS) clean)
+ -rm -f etc/emacs.tmpdesktop
+ cd src && $(MAKE) $(MFLAGS) clean
+ cd oldXMenu && $(MAKE) $(MFLAGS) clean
+ cd lwlib && $(MAKE) $(MFLAGS) clean
+ cd lib && $(MAKE) $(MFLAGS) clean
+ cd lib-src && $(MAKE) $(MFLAGS) clean
+ cd nt && $(MAKE) $(MFLAGS) clean
+ -cd doc/emacs && $(MAKE) $(MFLAGS) clean
+ -cd doc/misc && $(MAKE) $(MFLAGS) clean
+ -cd doc/lispref && $(MAKE) $(MFLAGS) clean
+ -cd doc/lispintro && $(MAKE) $(MFLAGS) clean
+ cd leim && $(MAKE) $(MFLAGS) clean
+ cd nextstep && $(MAKE) $(MFLAGS) clean
### `bootclean'
### Delete all files that need to be remade for a clean bootstrap.
${top_bootclean}; \
rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
distclean: FRC
- (cd src; $(MAKE) $(MFLAGS) distclean)
- (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
- (cd lwlib; $(MAKE) $(MFLAGS) distclean)
- (cd lib; $(MAKE) $(MFLAGS) distclean)
- (cd lib-src; $(MAKE) $(MFLAGS) distclean)
- (cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
- (cd doc/misc && $(MAKE) $(MFLAGS) distclean)
- (cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
- (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
- (cd leim; $(MAKE) $(MFLAGS) distclean)
- (cd lisp; $(MAKE) $(MFLAGS) distclean)
+ cd src && $(MAKE) $(MFLAGS) distclean
+ cd oldXMenu && $(MAKE) $(MFLAGS) distclean
+ cd lwlib && $(MAKE) $(MFLAGS) distclean
+ cd lib && $(MAKE) $(MFLAGS) distclean
+ cd lib-src && $(MAKE) $(MFLAGS) distclean
+ cd nt && $(MAKE) $(MFLAGS) distclean
+ cd doc/emacs && $(MAKE) $(MFLAGS) distclean
+ cd doc/misc && $(MAKE) $(MFLAGS) distclean
+ cd doc/lispref && $(MAKE) $(MFLAGS) distclean
+ cd doc/lispintro && $(MAKE) $(MFLAGS) distclean
+ cd leim && $(MAKE) $(MFLAGS) distclean
+ cd lisp && $(MAKE) $(MFLAGS) distclean
+ cd nextstep && $(MAKE) $(MFLAGS) distclean
+ for dir in test/automated admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \
+ done
${top_distclean}
### `bootstrap-clean'
### Delete everything that can be reconstructed by `make' and that
### needs to be deleted in order to force a bootstrap from a clean state.
bootstrap-clean: FRC
- (cd src; $(MAKE) $(MFLAGS) bootstrap-clean)
- (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
- (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
- (cd lib; $(MAKE) $(MFLAGS) maintainer-clean)
- (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
- -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
- -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
- -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
- -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
- (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
- (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
+ cd src && $(MAKE) $(MFLAGS) bootstrap-clean
+ cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
+ cd lwlib && $(MAKE) $(MFLAGS) maintainer-clean
+ cd lib && $(MAKE) $(MFLAGS) maintainer-clean
+ cd lib-src && $(MAKE) $(MFLAGS) maintainer-clean
+ cd nt && $(MAKE) $(MFLAGS) maintainer-clean
+ -cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean
+ -cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean
+ -cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean
+ -cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) maintainer-clean
+ cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
+ cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
+ for dir in test/automated admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \
+ done
[ ! -f config.log ] || mv -f config.log config.log~
${top_bootclean}
-## configure; make bootstrap replaces the real config.log from configure
-## with the truncated one from config.status. The former is more useful.
### `maintainer-clean'
### Delete everything from the current directory that can be
${top_distclean}; \
rm -fr autom4te.cache
maintainer-clean: bootstrap-clean FRC
- (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
- (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
+ cd src && $(MAKE) $(MFLAGS) maintainer-clean
+ cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
+ for dir in test/automated admin/unidata; do \
+ [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \
+ done
${top_maintainer_clean}
### This doesn't actually appear in the coding standards, but Karl
TAGS tags: lib lib-src src
cd src; $(MAKE) $(MFLAGS) tags
-check:
+check: all
@if test ! -d test/automated; then \
echo "You do not seem to have the test/ directory."; \
echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
dist:
cd ${srcdir}; ./make-dist
+DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
+HTMLS = lispref-html lispintro-html emacs-html misc-html
+INFOS = lispref-info lispintro-info emacs-info misc-info
+PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
+PSS = lispref-ps lispintro-ps emacs-ps misc-ps
+
+DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
+$(DOCS):
+ t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
+
+.PHONY: $(DOCS) docs pdf ps
.PHONY: info dvi dist check html info-real force-info check-info-dir
-info-real:
- (cd doc/emacs; $(MAKE) $(MFLAGS) info)
- (cd doc/misc; $(MAKE) $(MFLAGS) info)
- (cd doc/lispref; $(MAKE) $(MFLAGS) info)
- (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
+## TODO add etc/refcards.
+docs: $(DOCS)
+dvi: $(DVIS)
+html: $(HTMLS)
+info-real: $(INFOS)
+pdf: $(PDFS)
+ps: $(PSS)
+
+
+INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
+ install-lispintro-dvi install-misc-dvi
+INSTALL_HTML = install-emacs-html install-lispref-html \
+ install-lispintro-html install-misc-html
+INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
+ install-lispintro-pdf install-misc-pdf
+INSTALL_PS = install-emacs-ps install-lispref-ps \
+ install-lispintro-ps install-misc-ps
+INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
+
+## Install non .info forms of the documentation.
+## TODO add etc/refcards.
+$(INSTALL_DOC):
+ t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
+
+.PHONY: $(INSTALL_DOC) install-doc
+.PHONY: install-dvi install-html install-pdf install-ps
+
+install-doc: $(INSTALL_DOC)
+install-dvi: $(INSTALL_DVI)
+install-html: $(INSTALL_HTML)
+install-pdf: $(INSTALL_PDF)
+install-ps: $(INSTALL_PS)
+
+
+UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
+ uninstall-lispintro-dvi uninstall-misc-dvi
+UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
+ uninstall-lispintro-html uninstall-misc-html
+UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
+ uninstall-lispintro-pdf uninstall-misc-pdf
+UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
+ uninstall-lispintro-ps uninstall-misc-ps
+UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
+
+$(UNINSTALL_DOC):
+ t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
+
+.PHONY: $(UNINSTALL_DOC) uninstall-doc
+.PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
+
+uninstall-doc: $(UNINSTALL_DOC)
+uninstall-dvi: $(UNINSTALL_DVI)
+uninstall-html: $(UNINSTALL_HTML)
+uninstall-pdf: $(UNINSTALL_PDF)
+uninstall-ps: $(UNINSTALL_PS)
+
force-info:
# Note that man/Makefile knows how to put the info files in $(srcdir),
fi
# The info/dir file must be updated by hand when new manuals are added.
+# Cannot add an info/dir entry for efaq-w32 since it is not installed
+# on all platforms.
check-info-dir: info
cd info ; \
missing= ; \
for file in *; do \
test -f "$${file}" || continue ; \
case $${file} in \
- *-[0-9]*|COPYING|dir) continue ;; \
+ *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
esac ; \
file=`echo $${file} | sed 's/\.info//'` ; \
grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
fi ; \
echo "info/dir is OK"
-dvi:
- (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
- (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
- (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
- (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
-
#### Bootstrapping.
### This first cleans the lisp subdirectory, removing all compiled
.PHONY: bootstrap
-## configure; make bootstrap replaces the real config.log from configure
-## with the truncated one from config.status. The former is more useful.
+# Bootstrapping does the following:
+# * Remove files to start from a bootstrap-clean slate.
+# * Run autogen.sh.
+# * Rebuild Makefile, to update the build procedure itself.
+# * Do the actual build.
bootstrap: bootstrap-clean FRC
- if [ -x ./config.status ]; then \
- ./config.status; \
- else \
- ./configure $(CONFIGURE_FLAGS); \
- fi
+ cd $(srcdir) && ./autogen.sh
+ $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) $(MFLAGS) info all
.PHONY: check-declare
echo "You must build Emacs to use this command"; \
exit 1; \
fi
- (cd leim; $(MAKE) $(MFLAGS) $@)
- (cd lisp; $(MAKE) $(MFLAGS) $@)
+ cd leim && $(MAKE) $(MFLAGS) $@
+ cd lisp && $(MAKE) $(MFLAGS) $@