- Lisp_Object tem, tem1, sitelisp;
-
- /* Remove "site-lisp" dirs from front of path temporarily
- and store them in sitelisp, then conc them on at the
- end so they're always first in path.
- Note that this won't work if you used a
- --enable-locallisppath element that does not happen
- to contain "site-lisp" in its name.
- */
- sitelisp = Qnil;
- while (1)
- {
- tem = Fcar (Vload_path);
- tem1 = Fstring_match (build_string ("site-lisp"),
- tem, Qnil);
- if (!NILP (tem1))
- {
- Vload_path = Fcdr (Vload_path);
- sitelisp = Fcons (tem, sitelisp);
- }
- else
- break;
- }
-
- if (!NILP (Vinstallation_directory))
- {
- /* Add to the path the lisp subdir of the
- installation dir, if it exists. */
- tem = Fexpand_file_name (build_string ("lisp"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- {
- turn_off_warning = 1;
- Vload_path = Fcons (tem, Vload_path);
- }
- }
- else
- /* That dir doesn't exist, so add the build-time
- Lisp dirs instead. */
- Vload_path = nconc2 (Vload_path, dump_path);
-
- /* Add leim under the installation dir, if it exists. */
- tem = Fexpand_file_name (build_string ("leim"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
-
- /* Add site-lisp under the installation dir, if it exists. */
- if (!no_site_lisp)
- {
- tem = Fexpand_file_name (build_string ("site-lisp"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
- }
-
- /* If Emacs was not built in the source directory,
- and it is run from where it was built, add to load-path
- the lisp, leim and site-lisp dirs under that directory. */
-
- if (NILP (Fequal (Vinstallation_directory, Vsource_directory)))
- {
- Lisp_Object tem2;
-
- tem = Fexpand_file_name (build_string ("src/Makefile"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
-
- /* Don't be fooled if they moved the entire source tree
- AFTER dumping Emacs. If the build directory is indeed
- different from the source dir, src/Makefile.in and
- src/Makefile will not be found together. */
- tem = Fexpand_file_name (build_string ("src/Makefile.in"),
- Vinstallation_directory);
- tem2 = Ffile_exists_p (tem);
- if (!NILP (tem1) && NILP (tem2))
- {
- tem = Fexpand_file_name (build_string ("lisp"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
-
- tem = Fexpand_file_name (build_string ("leim"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
-
- if (!no_site_lisp)
- {
- tem = Fexpand_file_name (build_string ("site-lisp"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
- }
- } /* Vinstallation_directory != Vsource_directory */
- } /* if Vinstallation_directory */
- if (!NILP (sitelisp) && !no_site_lisp)
- Vload_path = nconc2 (Fnreverse (sitelisp), Vload_path);
- } /* if Vinstallation_directory || no_site_lisp */
- } /* if dump_path == Vload_path */
+ Lisp_Object tem, tem1;
+
+ /* Add to the path the lisp subdir of the installation
+ dir, if it exists. Note: in out-of-tree builds,
+ this directory is empty save for Makefile. */
+ tem = Fexpand_file_name (build_string ("lisp"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ {
+ /* We are running uninstalled. The default load-path
+ points to the eventual installed lisp, leim
+ directories. We should not use those now, even
+ if they exist, so start over from a clean slate. */
+ Vload_path = Fcons (tem, Qnil);
+ }
+ }
+ else
+ /* That dir doesn't exist, so add the build-time
+ Lisp dirs instead. */
+ Vload_path = nconc2 (Vload_path, dump_path);
+
+ /* Add leim under the installation dir, if it exists. */
+ tem = Fexpand_file_name (build_string ("leim"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+
+ /* Add site-lisp under the installation dir, if it exists. */
+ if (!no_site_lisp)
+ {
+ tem = Fexpand_file_name (build_string ("site-lisp"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+
+ /* If Emacs was not built in the source directory,
+ and it is run from where it was built, add to load-path
+ the lisp, leim and site-lisp dirs under that directory. */
+
+ if (NILP (Fequal (Vinstallation_directory, Vsource_directory)))
+ {
+ Lisp_Object tem2;
+
+ tem = Fexpand_file_name (build_string ("src/Makefile"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+
+ /* Don't be fooled if they moved the entire source tree
+ AFTER dumping Emacs. If the build directory is indeed
+ different from the source dir, src/Makefile.in and
+ src/Makefile will not be found together. */
+ tem = Fexpand_file_name (build_string ("src/Makefile.in"),
+ Vinstallation_directory);
+ tem2 = Ffile_exists_p (tem);
+ if (!NILP (tem1) && NILP (tem2))
+ {
+ tem = Fexpand_file_name (build_string ("lisp"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+
+ tem = Fexpand_file_name (build_string ("leim"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+
+ if (!no_site_lisp)
+ {
+ tem = Fexpand_file_name (build_string ("site-lisp"),
+ Vsource_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+ }
+ } /* Vinstallation_directory != Vsource_directory */
+
+ } /* if Vinstallation_directory */
+
+ /* Check before adding the site-lisp directories.
+ The install should have created them, but they are not
+ required, so no need to warn if they are absent.
+ Or we might be running before installation. */
+ load_path_check ();
+
+ /* Add the site-lisp directories at the front. */
+ if (!no_site_lisp)
+ {
+ Lisp_Object sitelisp;
+ sitelisp = decode_env_path (0, PATH_SITELOADSEARCH);
+ if (! NILP (sitelisp)) Vload_path = nconc2 (sitelisp, Vload_path);
+ }
+ } /* if dump_path == Vload_path */