% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2013-01-01.15}
+\def\texinfoversion{2014-01-16.10}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
\toks6=\expandafter{\prevsectiondefs}%
\toks8=\expandafter{\lastcolordefs}%
\mark{%
- \the\toks0 \the\toks2
- \noexpand\or \the\toks4 \the\toks6
- \noexpand\else \the\toks8
+ \the\toks0 \the\toks2 % 0: top marks (\last...)
+ \noexpand\or \the\toks4 \the\toks6 % 1: bottom marks (default, \prev...)
+ \noexpand\else \the\toks8 % 2: color marks
}%
}
% \topmark doesn't work for the very first chapter (after the title
%
% Do this outside of the \shipout so @code etc. will be expanded in
% the headline as they should be, not taken literally (outputting ''code).
+ \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars}
+ %
\ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+ \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
+ %
\ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+ \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
%
{%
% Have to do this stuff outside the \shipout because we want it to
\ifpdf
%
- % Color manipulation macros based on pdfcolor.tex,
+ % Color manipulation macros using ideas from pdfcolor.tex,
% except using rgb instead of cmyk; the latter is said to render as a
% very dark gray on-screen and a very dark halftone in print, instead
- % of actual black.
+ % of actual black. The dark red here is dark enough to print on paper as
+ % nearly black, but still distinguishable for online viewing. We use
+ % black by default, though.
\def\rgbDarkRed{0.50 0.09 0.12}
\def\rgbBlack{0 0 0}
%
% used to mark target names; must be expandable.
\def\pdfmkpgn#1{#1}
%
- % by default, use a color that is dark enough to print on paper as
- % nearly black, but still distinguishable for online viewing.
- \def\urlcolor{\rgbDarkRed}
- \def\linkcolor{\rgbDarkRed}
+ % by default, use black for everything.
+ \def\urlcolor{\rgbBlack}
+ \def\linkcolor{\rgbBlack}
\def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
\ifx\next,%
\else\ifx\next-%
\else\ifx\next.%
+ \else\ifx\next\.%
+ \else\ifx\next\comma%
\else\ptexslash
- \fi\fi\fi
+ \fi\fi\fi\fi\fi
\aftersmartic
}
}
% We *must* turn on hyphenation at `-' and `_' in @code.
+% (But see \codedashfinish below.)
% Otherwise, it is too hard to avoid overfull hboxes
% in the Emacs manual, the Library manual, etc.
%
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
% both hyphenation at - and hyphenation within words.
% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
+% and arrange explicitly to hyphenate at a dash. -- rms.
{
\catcode`\-=\active \catcode`\_=\active
\catcode`\'=\active \catcode`\`=\active
\let-\codedash
\let_\codeunder
\else
- \let-\realdash
+ \let-\normaldash
\let_\realunder
\fi
+ % Given -foo (with a single dash), we do not want to allow a break
+ % after the hyphen.
+ \global\let\codedashprev=\codedash
+ %
\codex
}
+ %
+ \gdef\codedash{\futurelet\next\codedashfinish}
+ \gdef\codedashfinish{%
+ \normaldash % always output the dash character itself.
+ %
+ % Now, output a discretionary to allow a line break, unless
+ % (a) the next character is a -, or
+ % (b) the preceding character is a -.
+ % E.g., given --posix, we do not want to allow a break after either -.
+ % Given --foo-bar, we do want to allow a break between the - and the b.
+ \ifx\next\codedash \else
+ \ifx\codedashprev\codedash
+ \else \discretionary{}{}{}\fi
+ \fi
+ % we need the space after the = for the case when \next itself is a
+ % space token; it would get swallowed otherwise. As in @code{- a}.
+ \global\let\codedashprev= \next
+ }
}
-
+\def\normaldash{-}
+%
\def\codex #1{\tclose{#1}\endgroup}
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
\def\codeunder{%
% this is all so @math{@code{var_name}+1} can work. In math mode, _
% is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
}
% An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__. This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general. @allowcodebreaks provides a way to control this.
+% each of the four underscores in __typeof__. This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
%
\newif\ifallowcodebreaks \allowcodebreakstrue
\let\file=\code
\let\option=\code
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url.
-% (This \urefnobreak definition isn't used now, leaving it for a while
-% for comparison.)
-\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
-\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
+% @uref (abbreviation for `urlref') aka @url takes an optional
+% (comma-separated) second argument specifying the text to display and
+% an optional third arg as text to display instead of (rather than in
+% addition to) the url itself. First (mandatory) arg is the url.
+
+% TeX-only option to allow changing PDF output to show only the second
+% arg (if given), and not the url (which is then just the link target).
+\newif\ifurefurlonlylink
-% This \urefbreak definition is the active one.
+% The main macro is \urefbreak, which allows breaking at expected
+% places within the url. (There used to be another version, which
+% didn't support automatic breaking.)
\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
\let\uref=\urefbreak
+%
\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
\unsepspaces
\ifdim\wd0 > 0pt
\unhbox0 % third arg given, show only that
\else
- \setbox0 = \hbox{\ignorespaces #2}%
+ \setbox0 = \hbox{\ignorespaces #2}% look for second arg
\ifdim\wd0 > 0pt
\ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
+ \ifurefurlonlylink
+ % PDF plus option to not display url, show just arg
+ \unhbox0
+ \else
+ % PDF, normally display both arg and url for consistency,
+ % visibility, if the pdf is eventually used to print, etc.
+ \unhbox0\ (\urefcode{#1})%
+ \fi
\else
- \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
+ \unhbox0\ (\urefcode{#1})% DVI, always show arg and url
\fi
\else
\urefcode{#1}% only url given, so show it
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
+%
+% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
+% FMTNAME is tex, else ELSE-TEXT.
+\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
+\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{%
+ \def\inlinefmtname{#1}%
+ \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi
+}
+%
% For raw, must switch into @tex before parsing the argument, to avoid
% setting catcodes prematurely. Doing it this way means that, for
% example, @inlineraw{html, foo{bar} gets a parse error instead of being
\endgroup % close group opened by \tex.
}
+% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set.
+%
+\long\def\inlineifset#1{\doinlineifset #1,\finish}
+\long\def\doinlineifset#1,#2,\finish{%
+ \def\inlinevarname{#1}%
+ \expandafter\ifx\csname SET\inlinevarname\endcsname\relax
+ \else\ignorespaces#2\fi
+}
+
+% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set.
+%
+\long\def\inlineifclear#1{\doinlineifclear #1,\finish}
+\long\def\doinlineifclear#1,#2,\finish{%
+ \def\inlinevarname{#1}%
+ \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi
+}
+
\message{glyphs,}
% and logos.
\parskip=\smallskipamount
\ifdim\parskip=0pt \parskip=2pt \fi
%
- % Try typesetting the item mark that if the document erroneously says
+ % Try typesetting the item mark so that if the document erroneously says
% something like @itemize @samp (intending @table), there's an error
% right away at the @itemize. It's not the best error message in the
% world, but it's better than leaving it to the @item. This means if
\def\value{\begingroup\makevalueexpandable\valuexxx}
\def\valuexxx#1{\expandablevalue{#1}\endgroup}
{
- \catcode`\- = \active \catcode`\_ = \active
+ \catcode`\-=\active \catcode`\_=\active
%
\gdef\makevalueexpandable{%
\let\value = \expandablevalue
% ..., but we might end up with active ones in the argument if
% we're called from @code, as @code{@value{foo-bar_}}, though.
% So \let them to their normal equivalents.
- \let-\realdash \let_\normalunderscore
+ \let-\normaldash \let_\normalunderscore
}
}
% variable's value contains other Texinfo commands, it's almost certain
% it will fail (although perhaps we could fix that with sufficient work
% to do a one-level expansion on the result, instead of complete).
-%
+%
+% Unfortunately, this has the consequence that when _ is in the *value*
+% of an @set, it does not print properly in the roman fonts (get the cmr
+% dot accent at position 126 instead). No fix comes to mind, and it's
+% been this way since 2003 or earlier, so just ignore it.
+%
\def\expandablevalue#1{%
\expandafter\ifx\csname SET#1\endcsname\relax
{[No value for ``#1'']}%
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
-% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+% To get the special treatment we need for `@end ifset,' we call
+% \makecond and then redefine.
%
\makecond{ifset}
\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
%
% Now the second mark, after the heading break. No break points
% between here and the heading.
- \let\prevsectiondefs=\lastsectiondefs
+ \global\let\prevsectiondefs=\lastsectiondefs
\domark
%
% Only insert the space after the number if we have a section number.
\catcode `\|=\other
\catcode `\<=\other
\catcode `\>=\other
- \catcode`\`=\other
- \catcode`\'=\other
+ \catcode `\`=\other
+ \catcode `\'=\other
\escapechar=`\\
%
% ' is active in math mode (mathcode"8000). So reset it, and all our
\let\/=\ptexslash
\let\*=\ptexstar
\let\t=\ptext
- \expandafter \let\csname top\endcsname=\ptextop % outer
+ \expandafter \let\csname top\endcsname=\ptextop % we've made it outer
\let\frenchspacing=\plainfrenchspacing
%
\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
\newdimen\nonfillparindent
\def\nonfillstart{%
\aboveenvbreak
- \hfuzz = 12pt % Don't be fussy
+ \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy
\sepspaces % Make spaces be word-separators rather than space tokens.
\let\par = \lisppar % don't ignore blank lines
\obeylines % each line of input is a line of output
\gdef\footnote{%
\let\indent=\ptexindent
\let\noindent=\ptexnoindent
+ %
\global\advance\footnoteno by \@ne
\edef\thisfootno{$^{\the\footnoteno}$}%
%
%
\gdef\dofootnote{%
\insert\footins\bgroup
+ %
+ % Nested footnotes are not supported in TeX, that would take a lot
+ % more work. (\startsavinginserts does not suffice.)
+ \let\footnote=\errfootnote
+ %
% We want to typeset this text as a normal paragraph, even if the
% footnote reference occurs in (for example) a display environment.
% So reset some parameters.
}
}%end \catcode `\@=11
+\def\errfootnote{%
+ \errhelp=\EMsimple
+ \errmessage{Nested footnotes not supported in texinfo.tex,
+ even though they work in makeinfo; sorry}
+}
+
% In case a @footnote appears in a vbox, save the footnote text and create
% the real \insert just after the vbox finished. Otherwise, the insertion
% would be lost.
% Similarly, if a @footnote appears inside an alignment, save the footnote
% text to a box and make the \insert when a row of the table is finished.
% And the same can be done for other insert classes. --kasal, 16nov03.
-
+%
% Replace the \insert primitive by a cheating macro.
% Deeper inside, just make sure that the saved insertions are not spilled
% out prematurely.
\catcode`\"=\active
\def\activedoublequote{{\tt\char34}}
\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
+\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde
\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
+\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat
\catcode`\_=\active
\def_{\ifusingtt\normalunderscore\_}
\catcode`\|=\active
\def|{{\tt\char124}}
+
\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
+\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless
\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr
+\catcode`\+=\active \def+{{\tt \char 43}}
+\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% used for headline/footline in the output routine, in case the page
+% breaks in the middle of an @tex block.
+\def\texinfochars{%
+ \let< = \activeless
+ \let> = \activegtr
+ \let~ = \activetilde
+ \let^ = \activehat
+ \markupsetuplqdefault \markupsetuprqdefault
+ \let\b = \strong
+ \let\i = \smartitalic
+ % in principle, all other definitions in \tex have to be undone too.
+}
% If a .fmt file is being used, characters that might appear in a file
% name cannot be active until we have parsed the command line.
@gdef@otherbackslash{@let\=@realbackslash}
% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
-@def@normalturnoffactive{%
- @let"=@normaldoublequote
- @let$=@normaldollar %$ font-lock fix
- @let+=@normalplus
- @let<=@normalless
- @let>=@normalgreater
- @let\=@normalbackslash
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let~=@normaltilde
- @markupsetuplqdefault
- @markupsetuprqdefault
- @unsepspaces
+% the literal character `\'. Also revert - to its normal character, in
+% case the active - from code has slipped in.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+ @let-=@normaldash
+ @let"=@normaldoublequote
+ @let$=@normaldollar %$ font-lock fix
+ @let+=@normalplus
+ @let<=@normalless
+ @let>=@normalgreater
+ @let\=@normalbackslash
+ @let^=@normalcaret
+ @let_=@normalunderscore
+ @let|=@normalverticalbar
+ @let~=@normaltilde
+ @markupsetuplqdefault
+ @markupsetuprqdefault
+ @unsepspaces
+ }
}
% Make _ and + \other characters, temporarily.