;;; tar-mode.el --- simple editing of tar files from GNU emacs
-;; Copyright (C) 1990, 1991, 1993, 1994, 1995 Free Software Foundation, Inc.
+;; Copyright (C) 1990,91,93,94,95,96,97,98,99,2000,01,2004
+;; Free Software Foundation, Inc.
;; Author: Jamie Zawinski <jwz@lucid.com>
;; Maintainer: FSF
;; This code now understands the extra fields that GNU tar adds to tar files.
;; This interacts correctly with "uncompress.el" in the Emacs library,
-;; which you get with
+;; which you get with
;;
;; (autoload 'uncompress-while-visiting "uncompress")
;; (setq auto-mode-alist (cons '("\\.Z$" . uncompress-while-visiting)
;;
;; Do not attempt to use tar-mode.el with crypt.el, you will lose.
-;; *************** TO DO ***************
+;; *************** TO DO ***************
;;
;; o chmod should understand "a+x,og-w".
;;
-;; o It's not possible to add a NEW file to a tar archive; not that
+;; o It's not possible to add a NEW file to a tar archive; not that
;; important, but still...
;;
;; o The code is less efficient that it could be - in a lot of places, I
;; of an archive, where <esc> would leave you in a subfile-edit buffer.
;; (Like the Meta-R command of the Zmacs mail reader.)
;;
-;; o Sometimes (but not always) reverting the tar-file buffer does not
+;; o Sometimes (but not always) reverting the tar-file buffer does not
;; re-grind the listing, and you are staring at the binary tar data.
;; Typing 'g' again immediately after that will always revert and re-grind
;; it, though. I have no idea why this happens.
;; might be a problem if the tar write-file-hook does not come *first* on
;; the list.
;;
-;; o Block files, sparse files, continuation files, and the various header
+;; o Block files, sparse files, continuation files, and the various header
;; types aren't editable. Actually I don't know that they work at all.
;; Rationale:
(defcustom tar-anal-blocksize 20
"*The blocksize of tar files written by Emacs, or nil, meaning don't care.
The blocksize of a tar file is not really the size of the blocks; rather, it is
-the number of blocks written with one system call. When tarring to a tape,
+the number of blocks written with one system call. When tarring to a tape,
this is the size of the *tape* blocks, but when writing to a file, it doesn't
matter much. The only noticeable difference is that if a tar file does not
have a blocksize of 20, tar will tell you that; all this really controls is
:group 'tar)
(defcustom tar-update-datestamp nil
- "*Non-nil means tar-mode should play fast and loose with sub-file datestamps.
+ "*Non-nil means Tar mode should play fast and loose with sub-file datestamps.
If this is true, then editing and saving a tar file entry back into its
tar file will update its datestamp. If false, the datestamp is unchanged.
You may or may not want this - it is good in that you can tell when a file
in a tar archive has been changed, but it is bad for the same reason that
-editing a file in the tar archive at all is bad - the changed version of
+editing a file in the tar archive at all is bad - the changed version of
the file never exists on disk."
:type 'boolean
:group 'tar)
:group 'tar)
(defvar tar-parse-info nil)
+;; Be sure that this variable holds byte position, not char position.
(defvar tar-header-offset nil)
(defvar tar-superior-buffer nil)
(defvar tar-superior-descriptor nil)
(put 'tar-superior-buffer 'permanent-local t)
(put 'tar-superior-descriptor 'permanent-local t)
\f
-;;; First, duplicate some Common Lisp functions; I used to just (require 'cl)
-;;; but "cl.el" was messing some people up (also it's really big).
-
(defmacro tar-setf (form val)
"A mind-numbingly simple implementation of setf."
(let ((mform (macroexpand form (and (boundp 'byte-compile-macro-environment)
((eq (car mform) 'cdr)
(list 'setcdr (nth 1 mform) val))
(t (error "don't know how to setf %s" form)))))
-
-(defmacro tar-dolist (control &rest body)
- "syntax: (dolist (var-name list-expr &optional return-value) &body body)"
- (let ((var (car control))
- (init (car (cdr control)))
- (val (car (cdr (cdr control)))))
- (list 'let (list (list '_dolist_iterator_ init))
- (list 'while '_dolist_iterator_
- (cons 'let
- (cons (list (list var '(car _dolist_iterator_)))
- (append body
- (list (list 'setq '_dolist_iterator_
- (list 'cdr '_dolist_iterator_)))))))
- val)))
-
-(defmacro tar-dotimes (control &rest body)
- "syntax: (dolist (var-name count-expr &optional return-value) &body body)"
- (let ((var (car control))
- (n (car (cdr control)))
- (val (car (cdr (cdr control)))))
- (list 'let (list (list '_dotimes_end_ n)
- (list var 0))
- (cons 'while
- (cons (list '< var '_dotimes_end_)
- (append body
- (list (list 'setq var (list '1+ var))))))
- val)))
-
\f
;;; down to business.
(defun tar-header-block-tokenize (string)
"Return a `tar-header' structure.
-This is a list of name, mode, uid, gid, size,
+This is a list of name, mode, uid, gid, size,
write-date, checksum, link-type, and link-name."
(cond ((< (length string) 512) nil)
(;(some 'plusp string) ; <-- oops, massive cycle hog!
(link-p (aref string tar-linkp-offset))
(magic-str (substring string tar-magic-offset (1- tar-uname-offset)))
(uname-valid-p (or (string= "ustar " magic-str) (string= "GNUtar " magic-str)))
- name
+ name linkname
(nulsexp "[^\000]*\000"))
- (and (string-match nulsexp string tar-name-offset) (setq name-end (min name-end (1- (match-end 0)))))
- (and (string-match nulsexp string tar-link-offset) (setq link-end (min link-end (1- (match-end 0)))))
- (and (string-match nulsexp string tar-uname-offset) (setq uname-end (min uname-end (1- (match-end 0)))))
- (and (string-match nulsexp string tar-gname-offset) (setq gname-end (min gname-end (1- (match-end 0)))))
+ (when (string-match nulsexp string tar-name-offset)
+ (setq name-end (min name-end (1- (match-end 0)))))
+ (when (string-match nulsexp string tar-link-offset)
+ (setq link-end (min link-end (1- (match-end 0)))))
+ (when (string-match nulsexp string tar-uname-offset)
+ (setq uname-end (min uname-end (1- (match-end 0)))))
+ (when (string-match nulsexp string tar-gname-offset)
+ (setq gname-end (min gname-end (1- (match-end 0)))))
(setq name (substring string tar-name-offset name-end)
link-p (if (or (= link-p 0) (= link-p ?0))
nil
(- link-p ?0)))
+ (setq linkname (substring string tar-link-offset link-end))
+ (if default-enable-multibyte-characters
+ (setq name
+ (decode-coding-string name (or file-name-coding-system
+ 'undecided))
+ linkname
+ (decode-coding-string linkname (or file-name-coding-system
+ 'undecided))))
(if (and (null link-p) (string-match "/$" name)) (setq link-p 5)) ; directory
(make-tar-header
name
- (tar-parse-octal-integer string tar-mode-offset (1- tar-uid-offset))
- (tar-parse-octal-integer string tar-uid-offset (1- tar-gid-offset))
- (tar-parse-octal-integer string tar-gid-offset (1- tar-size-offset))
- (tar-parse-octal-integer string tar-size-offset (1- tar-time-offset))
- (tar-parse-octal-long-integer string tar-time-offset (1- tar-chk-offset))
- (tar-parse-octal-integer string tar-chk-offset (1- tar-linkp-offset))
+ (tar-parse-octal-integer string tar-mode-offset tar-uid-offset)
+ (tar-parse-octal-integer string tar-uid-offset tar-gid-offset)
+ (tar-parse-octal-integer string tar-gid-offset tar-size-offset)
+ (tar-parse-octal-integer string tar-size-offset tar-time-offset)
+ (tar-parse-octal-long-integer string tar-time-offset tar-chk-offset)
+ (tar-parse-octal-integer string tar-chk-offset tar-linkp-offset)
link-p
- (substring string tar-link-offset link-end)
+ linkname
uname-valid-p
(and uname-valid-p (substring string tar-uname-offset uname-end))
(and uname-valid-p (substring string tar-gname-offset gname-end))
- (tar-parse-octal-integer string tar-dmaj-offset (1- tar-dmin-offset))
- (tar-parse-octal-integer string tar-dmin-offset (1- tar-end-offset))
+ (tar-parse-octal-integer string tar-dmaj-offset tar-dmin-offset)
+ (tar-parse-octal-integer string tar-dmin-offset tar-end-offset)
)))
(t 'empty-tar-block)))
(defun tar-parse-octal-integer-safe (string)
(let ((L (length string)))
(if (= L 0) (error "empty string"))
- (tar-dotimes (i L)
+ (dotimes (i L)
(if (or (< (aref string i) ?0)
(> (aref string i) ?7))
- (error "'%c' is not an octal digit"))))
+ (error "`%c' is not an octal digit" (aref string i)))))
(tar-parse-octal-integer string))
(if (not (= desired-checksum (tar-header-block-checksum hblock)))
(progn (beep) (message "Invalid checksum for file %s!" file-name))))
-(defun tar-header-block-recompute-checksum (hblock)
- "Modifies the given string to have a valid checksum field."
- (let* ((chk (tar-header-block-checksum hblock))
- (chk-string (format "%6o" chk))
- (l (length chk-string)))
- (aset hblock 154 0)
- (aset hblock 155 32)
- (tar-dotimes (i l) (aset hblock (- 153 i) (aref chk-string (- l i 1)))))
- hblock)
-
(defun tar-clip-time-string (time)
(let ((str (current-time-string time)))
- (concat (substring str 4 16) (substring str 19 24))))
+ (concat " " (substring str 4 16) (substring str 19 24))))
-(defun tar-grind-file-mode (mode string start)
- "Store `-rw--r--r--' indicating MODE into STRING beginning at START.
+(defun tar-grind-file-mode (mode)
+ "Construct a `-rw--r--r--' string indicating MODE.
MODE should be an integer which is a file mode value."
- (aset string start (if (zerop (logand 256 mode)) ?- ?r))
- (aset string (+ start 1) (if (zerop (logand 128 mode)) ?- ?w))
- (aset string (+ start 2) (if (zerop (logand 64 mode)) ?- ?x))
- (aset string (+ start 3) (if (zerop (logand 32 mode)) ?- ?r))
- (aset string (+ start 4) (if (zerop (logand 16 mode)) ?- ?w))
- (aset string (+ start 5) (if (zerop (logand 8 mode)) ?- ?x))
- (aset string (+ start 6) (if (zerop (logand 4 mode)) ?- ?r))
- (aset string (+ start 7) (if (zerop (logand 2 mode)) ?- ?w))
- (aset string (+ start 8) (if (zerop (logand 1 mode)) ?- ?x))
- (if (zerop (logand 1024 mode)) nil (aset string (+ start 2) ?s))
- (if (zerop (logand 2048 mode)) nil (aset string (+ start 5) ?s))
- string)
+ (string
+ (if (zerop (logand 256 mode)) ?- ?r)
+ (if (zerop (logand 128 mode)) ?- ?w)
+ (if (zerop (logand 1024 mode)) (if (zerop (logand 64 mode)) ?- ?x) ?s)
+ (if (zerop (logand 32 mode)) ?- ?r)
+ (if (zerop (logand 16 mode)) ?- ?w)
+ (if (zerop (logand 2048 mode)) (if (zerop (logand 8 mode)) ?- ?x) ?s)
+ (if (zerop (logand 4 mode)) ?- ?r)
+ (if (zerop (logand 2 mode)) ?- ?w)
+ (if (zerop (logand 1 mode)) ?- ?x)))
(defun tar-header-block-summarize (tar-hblock &optional mod-p)
- "Returns a line similar to the output of `tar -vtf'."
+ "Return a line similar to the output of `tar -vtf'."
(let ((name (tar-header-name tar-hblock))
(mode (tar-header-mode tar-hblock))
(uid (tar-header-uid tar-hblock))
(size (tar-header-size tar-hblock))
(time (tar-header-date tar-hblock))
(ck (tar-header-checksum tar-hblock))
- (link-p (tar-header-link-type tar-hblock))
- (link-name (tar-header-link-name tar-hblock))
- )
- (let* ((left 11)
- (namew 8)
- (groupw 8)
- (sizew 8)
- (datew (if tar-mode-show-date 18 0))
- (slash (1- (+ left namew)))
- (lastdigit (+ slash groupw sizew))
- (datestart (+ lastdigit 2))
- (namestart (+ datestart datew))
- (string (make-string (+ namestart (length name) (if link-p (+ 5 (length link-name)) 0)) 32))
- (type (tar-header-link-type tar-hblock)))
- (aset string 0 (if mod-p ?* ? ))
- (aset string 1
+ (type (tar-header-link-type tar-hblock))
+ (link-name (tar-header-link-name tar-hblock)))
+ (format "%c%c%s%8s/%-8s%7s%s %s%s"
+ (if mod-p ?* ? )
(cond ((or (eq type nil) (eq type 0)) ?-)
- ((eq type 1) ?l) ; link
- ((eq type 2) ?s) ; symlink
- ((eq type 3) ?c) ; char special
- ((eq type 4) ?b) ; block special
- ((eq type 5) ?d) ; directory
- ((eq type 6) ?p) ; FIFO/pipe
- ((eq type 20) ?*) ; directory listing
- ((eq type 29) ?M) ; multivolume continuation
- ((eq type 35) ?S) ; sparse
- ((eq type 38) ?V) ; volume header
- ))
- (tar-grind-file-mode mode string 2)
- (setq uid (if (= 0 (length uname)) (int-to-string uid) uname))
- (setq gid (if (= 0 (length gname)) (int-to-string gid) gname))
- (setq size (int-to-string size))
- (setq time (tar-clip-time-string time))
- (tar-dotimes (i (min (1- namew) (length uid))) (aset string (- slash i) (aref uid (- (length uid) i 1))))
- (aset string (1+ slash) ?/)
- (tar-dotimes (i (min (1- groupw) (length gid))) (aset string (+ (+ slash 2) i) (aref gid i)))
- (tar-dotimes (i (min sizew (length size))) (aset string (- lastdigit i) (aref size (- (length size) i 1))))
- (if tar-mode-show-date
- (tar-dotimes (i (length time)) (aset string (+ datestart i) (aref time i))))
- (tar-dotimes (i (length name)) (aset string (+ namestart i) (aref name i)))
- (if (or (eq link-p 1) (eq link-p 2))
- (progn
- (tar-dotimes (i 3) (aset string (+ namestart 1 (length name) i) (aref (if (= link-p 1) "==>" "-->") i)))
- (tar-dotimes (i (length link-name)) (aset string (+ namestart 5 (length name) i) (aref link-name i)))))
- (put-text-property namestart (length string)
- 'mouse-face 'highlight string)
- string)))
-
+ ((eq type 1) ?h) ; link
+ ((eq type 2) ?l) ; symlink
+ ((eq type 3) ?c) ; char special
+ ((eq type 4) ?b) ; block special
+ ((eq type 5) ?d) ; directory
+ ((eq type 6) ?p) ; FIFO/pipe
+ ((eq type 20) ?*) ; directory listing
+ ((eq type 28) ?L) ; next has longname
+ ((eq type 29) ?M) ; multivolume continuation
+ ((eq type 35) ?S) ; sparse
+ ((eq type 38) ?V) ; volume header
+ (t ?\ )
+ )
+ (tar-grind-file-mode mode)
+ (if (= 0 (length uname)) uid uname)
+ (if (= 0 (length gname)) gid gname)
+ size
+ (if tar-mode-show-date (tar-clip-time-string time) "")
+ (propertize name
+ 'mouse-face 'highlight
+ 'help-echo "mouse-2: extract this file into a buffer")
+ (if (or (eq type 1) (eq type 2))
+ (concat (if (= type 1) " ==> " " --> ") link-name)
+ ""))))
+
+(defun tar-untar-buffer ()
+ "Extract all archive members in the tar-file into the current directory."
+ (interactive)
+ (let ((multibyte enable-multibyte-characters))
+ (unwind-protect
+ (save-restriction
+ (widen)
+ (set-buffer-multibyte nil)
+ (dolist (descriptor tar-parse-info)
+ (let* ((tokens (tar-desc-tokens descriptor))
+ (name (tar-header-name tokens))
+ (dir (file-name-directory name))
+ (start (+ (tar-desc-data-start descriptor)
+ (- tar-header-offset (point-min))))
+ (end (+ start (tar-header-size tokens))))
+ (unless (file-directory-p name)
+ (message "Extracting %s" name)
+ (if (and dir (not (file-exists-p dir)))
+ (make-directory dir t))
+ (unless (file-directory-p name)
+ (write-region start end name))
+ (set-file-modes name (tar-header-mode tokens))))))
+ (set-buffer-multibyte multibyte))))
(defun tar-summarize-buffer ()
"Parse the contents of the tar file in the current buffer.
Place a dired-like listing on the front;
then narrow to it, so that only that listing
is visible (and the real data of the buffer is hidden)."
- (message "Parsing tar file...")
+ (set-buffer-multibyte nil)
(let* ((result '())
- (pos 1)
- (bs (max 1 (- (buffer-size) 1024))) ; always 2+ empty blocks at end.
- (bs100 (max 1 (/ bs 100)))
+ (pos (point-min))
+ (progress-reporter
+ (make-progress-reporter "Parsing tar file..."
+ (point-min) (max 1 (- (buffer-size) 1024))))
tokens)
(while (and (<= (+ pos 512) (point-max))
(not (eq 'empty-tar-block
(tar-header-block-tokenize
(buffer-substring pos (+ pos 512)))))))
(setq pos (+ pos 512))
- (message "Parsing tar file...%d%%"
- ;(/ (* pos 100) bs) ; this gets round-off lossage
- (/ pos bs100) ; this doesn't
- )
+ (progress-reporter-update progress-reporter pos)
(if (eq (tar-header-link-type tokens) 20)
;; Foo. There's an extra empty block after these.
(setq pos (+ pos 512)))
;; A tar file should end with a block or two of nulls,
;; but let's not get a fatal error if it doesn't.
(if (eq tokens 'empty-tar-block)
- (message "Parsing tar file...done")
+ (progress-reporter-done progress-reporter)
(message "Warning: premature EOF parsing tar file")))
(save-excursion
(goto-char (point-min))
(summaries nil))
;; Collect summary lines and insert them all at once since tar files
;; can be pretty big.
- (tar-dolist (tar-desc (reverse tar-parse-info))
+ (dolist (tar-desc (reverse tar-parse-info))
(setq summaries
(cons (tar-header-block-summarize (tar-desc-tokens tar-desc))
(cons "\n"
summaries))))
- (insert (apply 'concat summaries))
+ (let ((total-summaries (apply 'concat summaries)))
+ (if (multibyte-string-p total-summaries)
+ (set-buffer-multibyte t))
+ (insert total-summaries))
(make-local-variable 'tar-header-offset)
(setq tar-header-offset (point))
- (narrow-to-region 1 tar-header-offset)
+ (narrow-to-region (point-min) tar-header-offset)
+ (if enable-multibyte-characters
+ (setq tar-header-offset (position-bytes tar-header-offset)))
(set-buffer-modified-p nil))))
\f
(defvar tar-mode-map nil "*Local keymap for Tar mode listings.")
(define-key tar-mode-map [down] 'tar-next-line)
(define-key tar-mode-map "o" 'tar-extract-other-window)
(define-key tar-mode-map "p" 'tar-previous-line)
- (define-key tar-mode-map "q" 'tar-quit)
+ (define-key tar-mode-map "q" 'quit-window)
(define-key tar-mode-map "\^P" 'tar-previous-line)
(define-key tar-mode-map [up] 'tar-previous-line)
(define-key tar-mode-map "R" 'tar-rename-entry)
(put 'tar-subfile-mode 'mode-class 'special)
;;;###autoload
-(defun tar-mode ()
+(define-derived-mode tar-mode nil "Tar"
"Major mode for viewing a tar file as a dired-like listing of its contents.
-You can move around using the usual cursor motion commands.
+You can move around using the usual cursor motion commands.
Letters no longer insert themselves.
Type `e' to pull a file out of the tar file and into its own buffer;
or click mouse-2 on the file's line in the Tar mode buffer.
Type `c' to copy an entry from the tar file into another file on disk.
-If you edit a sub-file of this archive (as with the `e' command) and
-save it with Control-x Control-s, the contents of that buffer will be
-saved back into the tar-file buffer; in this way you can edit a file
+If you edit a sub-file of this archive (as with the `e' command) and
+save it with Control-x Control-s, the contents of that buffer will be
+saved back into the tar-file buffer; in this way you can edit a file
inside of a tar archive without extracting it and re-archiving it.
See also: variables `tar-update-datestamp' and `tar-anal-blocksize'.
;; mode on and off. You can corrupt things that way.
;; rms: with permanent locals, it should now be possible to make this work
;; interactively in some reasonable fashion.
- (kill-all-local-variables)
(make-local-variable 'tar-header-offset)
(make-local-variable 'tar-parse-info)
- (make-local-variable 'require-final-newline)
- (setq require-final-newline nil) ; binary data, dude...
- (make-local-variable 'revert-buffer-function)
- (setq revert-buffer-function 'tar-mode-revert)
- (make-local-variable 'enable-local-variables)
- (setq enable-local-variables nil)
- (make-local-variable 'next-line-add-newlines)
- (setq next-line-add-newlines nil)
- (setq major-mode 'tar-mode)
- (setq mode-name "Tar")
- (use-local-map tar-mode-map)
+ (set (make-local-variable 'require-final-newline) nil) ; binary data, dude...
+ (set (make-local-variable 'revert-buffer-function) 'tar-mode-revert)
+ (set (make-local-variable 'local-enable-local-variables) nil)
+ (set (make-local-variable 'next-line-add-newlines) nil)
+ ;; Prevent loss of data when saving the file.
+ (set (make-local-variable 'file-precious-flag) t)
(auto-save-mode 0)
- (make-local-variable 'write-contents-hooks)
- (setq write-contents-hooks '(tar-mode-write-file))
+ (set (make-local-variable 'write-contents-functions) '(tar-mode-write-file))
(widen)
(if (and (boundp 'tar-header-offset) tar-header-offset)
- (narrow-to-region 1 tar-header-offset)
- (tar-summarize-buffer))
- (run-hooks 'tar-mode-hook)
- )
+ (narrow-to-region (point-min) (byte-to-position tar-header-offset))
+ (tar-summarize-buffer)
+ (tar-next-line 0)))
(defun tar-subfile-mode (p)
(interactive "P")
(or (and (boundp 'tar-superior-buffer) tar-superior-buffer)
(error "This buffer is not an element of a tar file"))
-;;; Don't do this, because it is redundant and wastes mode line space.
-;;; (or (assq 'tar-subfile-mode minor-mode-alist)
-;;; (setq minor-mode-alist (append minor-mode-alist
-;;; (list '(tar-subfile-mode " TarFile")))))
+ ;; Don't do this, because it is redundant and wastes mode line space.
+ ;; (or (assq 'tar-subfile-mode minor-mode-alist)
+ ;; (setq minor-mode-alist (append minor-mode-alist
+ ;; (list '(tar-subfile-mode " TarFile")))))
(make-local-variable 'tar-subfile-mode)
(setq tar-subfile-mode
(if (null p)
(not tar-subfile-mode)
(> (prefix-numeric-value p) 0)))
(cond (tar-subfile-mode
- (make-local-variable 'local-write-file-hooks)
- (setq local-write-file-hooks '(tar-subfile-save-buffer))
+ (add-hook 'write-file-functions 'tar-subfile-save-buffer nil t)
;; turn off auto-save.
(auto-save-mode -1)
(setq buffer-auto-save-file-name nil)
(run-hooks 'tar-subfile-mode-hook))
(t
- (kill-local-variable 'local-write-file-hooks))))
+ (remove-hook 'write-file-functions 'tar-subfile-save-buffer t))))
;; Revert the buffer and recompute the dired-like listing.
-(defun tar-mode-revert (&optional no-autosave no-confirm)
+(defun tar-mode-revert (&optional no-auto-save no-confirm)
(let ((revert-buffer-function nil)
(old-offset tar-header-offset)
success)
(setq tar-header-offset old-offset)))))
-(defun tar-next-line (p)
+(defun tar-next-line (arg)
+ "Move cursor vertically down ARG lines and to the start of the filename."
(interactive "p")
- (forward-line p)
+ (forward-line arg)
(if (eobp) nil (forward-char (if tar-mode-show-date 54 36))))
-(defun tar-previous-line (p)
+(defun tar-previous-line (arg)
+ "Move cursor vertically up ARG lines and to the start of the filename."
(interactive "p")
- (tar-next-line (- p)))
+ (tar-next-line (- arg)))
(defun tar-current-descriptor (&optional noerror)
"Return the tar-descriptor of the current line, or signals an error."
(error "This is a %s, not a real file"
(cond ((eq link-p 5) "directory")
((eq link-p 20) "tar directory header")
+ ((eq link-p 28) "next has longname")
((eq link-p 29) "multivolume-continuation")
((eq link-p 35) "sparse entry")
((eq link-p 38) "volume header")
(tokens (tar-desc-tokens descriptor))
(name (tar-header-name tokens))
(size (tar-header-size tokens))
- (start (+ (tar-desc-data-start descriptor) tar-header-offset -1))
+ (start (+ (tar-desc-data-start descriptor)
+ (- tar-header-offset (point-min))))
(end (+ start size)))
(let* ((tar-buffer (current-buffer))
- (tarname (file-name-nondirectory (buffer-file-name)))
+ (tar-buffer-multibyte enable-multibyte-characters)
+ (tarname (buffer-name))
(bufname (concat (file-name-nondirectory name)
" ("
- tarname
- ")"))
+ tarname
+ ")"))
(read-only-p (or buffer-read-only view-p))
- (buffer (get-buffer bufname))
+ (new-buffer-file-name (expand-file-name
+ ;; `:' is not allowed on Windows
+ (concat tarname "!" name)))
+ (buffer (get-file-buffer new-buffer-file-name))
(just-created nil))
- (if buffer
- nil
- (setq buffer (get-buffer-create bufname))
+ (unless buffer
+ (setq buffer (generate-new-buffer bufname))
+ (setq bufname (buffer-name buffer))
(setq just-created t)
(unwind-protect
(progn
(widen)
+ (set-buffer-multibyte nil)
(save-excursion
(set-buffer buffer)
- (insert-buffer-substring tar-buffer start end)
- (goto-char 0)
- (setq buffer-file-name
- ;; `:' is not allowed on Windows
- (expand-file-name (concat tarname "!" name)))
+ (if enable-multibyte-characters
+ (progn
+ ;; We must avoid unibyte->multibyte conversion.
+ (set-buffer-multibyte nil)
+ (insert-buffer-substring tar-buffer start end)
+ (set-buffer-multibyte t))
+ (insert-buffer-substring tar-buffer start end))
+ (goto-char (point-min))
+ (setq buffer-file-name new-buffer-file-name)
(setq buffer-file-truename
(abbreviate-file-name buffer-file-name))
+ ;; We need to mimic the parts of insert-file-contents
+ ;; which determine the coding-system and decode the text.
+ (let ((coding
+ (or coding-system-for-read
+ (and set-auto-coding-function
+ (save-excursion
+ (funcall set-auto-coding-function
+ name (- (point-max) (point)))))))
+ (multibyte enable-multibyte-characters)
+ (detected (detect-coding-region
+ (point-min)
+ (min (+ (point-min) 16384) (point-max)) t)))
+ (if coding
+ (or (numberp (coding-system-eol-type coding))
+ (vectorp (coding-system-eol-type detected))
+ (setq coding (coding-system-change-eol-conversion
+ coding
+ (coding-system-eol-type detected))))
+ (setq coding
+ (or (find-new-buffer-file-coding-system detected)
+ (let ((file-coding
+ (find-operation-coding-system
+ 'insert-file-contents buffer-file-name)))
+ (if (consp file-coding)
+ (setq file-coding (car file-coding))
+ file-coding)))))
+ (if (or (eq coding 'no-conversion)
+ (eq (coding-system-type coding) 5))
+ (setq multibyte (set-buffer-multibyte nil)))
+ (or multibyte
+ (setq coding
+ (coding-system-change-text-conversion
+ coding 'raw-text)))
+ (decode-coding-region (point-min) (point-max) coding)
+ (set-buffer-file-coding-system coding))
;; Set the default-directory to the dir of the
- ;; superior buffer.
+ ;; superior buffer.
(setq default-directory
(save-excursion
(set-buffer tar-buffer)
(make-local-variable 'tar-superior-descriptor)
(setq tar-superior-buffer tar-buffer)
(setq tar-superior-descriptor descriptor)
- (setq buffer-read-only read-only-p)
+ (setq buffer-read-only read-only-p)
(set-buffer-modified-p nil)
(tar-subfile-mode 1))
(set-buffer tar-buffer))
- (narrow-to-region 1 tar-header-offset)))
+ (narrow-to-region (point-min) tar-header-offset)
+ (set-buffer-multibyte tar-buffer-multibyte)))
(if view-p
(view-buffer buffer (and just-created 'kill-buffer))
(if (eq other-window-p 'display)
(tokens (tar-desc-tokens descriptor))
(name (tar-header-name tokens))
(size (tar-header-size tokens))
- (start (+ (tar-desc-data-start descriptor) tar-header-offset -1))
+ (start (+ (tar-desc-data-start descriptor)
+ (- tar-header-offset (point-min))))
(end (+ start size))
+ (multibyte enable-multibyte-characters)
(inhibit-file-name-handlers inhibit-file-name-handlers)
(inhibit-file-name-operation inhibit-file-name-operation))
(save-restriction
(and (eq inhibit-file-name-operation 'write-region)
inhibit-file-name-handlers))
inhibit-file-name-operation 'write-region))
- (write-region start end to-file))
+ (unwind-protect
+ (let ((coding-system-for-write 'no-conversion))
+ (set-buffer-multibyte nil)
+ (write-region start end to-file nil nil nil t))
+ (set-buffer-multibyte multibyte)))
(message "Copied tar entry %s to %s" name to-file)))
(defun tar-flag-deleted (p &optional unflag)
With a prefix argument, mark that many files."
(interactive "p")
(beginning-of-line)
- (tar-dotimes (i (if (< p 0) (- p) p))
+ (dotimes (i (if (< p 0) (- p) p))
(if (tar-current-descriptor unflag) ; barf if we're not on an entry-line.
(progn
(delete-char 1)
(tar-flag-deleted (- p) t))
+;; When this function is called, it is sure that the buffer is unibyte.
(defun tar-expunge-internal ()
"Expunge the tar-entry specified by the current line."
(let* ((descriptor (tar-current-descriptor))
;; iteration over the files that remain, or only iterate up to
;; the next file to be deleted.
(let ((data-length (- data-end data-start)))
- (tar-dolist (desc following-descs)
+ (dolist (desc following-descs)
(tar-setf (tar-desc-data-start desc)
(- (tar-desc-data-start desc) data-length))))
))
- (narrow-to-region 1 tar-header-offset))
+ (narrow-to-region (point-min) tar-header-offset))
(defun tar-expunge (&optional noconfirm)
(interactive)
(if (or noconfirm
(y-or-n-p "Expunge files marked for deletion? "))
- (let ((n 0))
+ (let ((n 0)
+ (multibyte enable-multibyte-characters))
+ (set-buffer-multibyte nil)
(save-excursion
- (goto-char 0)
+ (goto-char (point-min))
(while (not (eobp))
(if (looking-at "D")
(progn (tar-expunge-internal)
(forward-line 1)))
;; after doing the deletions, add any padding that may be necessary.
(tar-pad-to-blocksize)
- (narrow-to-region 1 tar-header-offset)
- )
+ (narrow-to-region (point-min) tar-header-offset))
+ (set-buffer-multibyte multibyte)
(if (zerop n)
(message "Nothing to expunge.")
(message "%s files expunged. Be sure to save this buffer." n)))))
"Remove the stars at the beginning of each line."
(interactive)
(save-excursion
- (goto-char 1)
- (while (< (point) tar-header-offset)
+ (goto-char (point-min))
+ (while (< (position-bytes (point)) tar-header-offset)
(if (not (eq (following-char) ?\ ))
(progn (delete-char 1) (insert " ")))
(forward-line 1))))
(defun tar-alter-one-field (data-position new-data-string)
(let* ((descriptor (tar-current-descriptor))
- (tokens (tar-desc-tokens descriptor)))
+ (tokens (tar-desc-tokens descriptor))
+ (multibyte enable-multibyte-characters))
(unwind-protect
(save-excursion
;;
(forward-line 1)
(delete-region p (point))
(insert (tar-header-block-summarize tokens) "\n")
- (setq tar-header-offset (point-max)))
-
+ (setq tar-header-offset (position-bytes (point-max))))
+
(widen)
+ (set-buffer-multibyte nil)
(let* ((start (+ (tar-desc-data-start descriptor) tar-header-offset -513)))
;;
;; delete the old field and insert a new one.
(buffer-substring start (+ start 512))
chk (tar-header-name tokens))
)))
- (narrow-to-region 1 tar-header-offset))))
+ (narrow-to-region (point-min) tar-header-offset)
+ (set-buffer-multibyte multibyte)
+ (tar-next-line 0))))
(defun tar-octal-time (timeval)
;; Format a timestamp as 11 octal digits. Ghod, I hope this works...
(let ((hibits (car timeval)) (lobits (car (cdr timeval))))
- (insert (format "%05o%01o%05o"
- (lsh hibits -2)
- (logior (lsh (logand 3 hibits) 1) (> (logand lobits 32768) 0))
- (logand 32767 lobits)
- ))))
+ (format "%05o%01o%05o"
+ (lsh hibits -2)
+ (logior (lsh (logand 3 hibits) 1)
+ (if (> (logand lobits 32768) 0) 1 0))
+ (logand 32767 lobits)
+ )))
(defun tar-subfile-save-buffer ()
"In tar subfile mode, save this buffer into its parent tar-file buffer.
(error "This buffer doesn't have an index into its superior tar file!"))
(save-excursion
(let ((subfile (current-buffer))
- (subfile-size (buffer-size))
- (descriptor tar-superior-descriptor))
+ (subfile-multibyte enable-multibyte-characters)
+ (coding buffer-file-coding-system)
+ (descriptor tar-superior-descriptor)
+ subfile-size)
+ ;; We must make the current buffer unibyte temporarily to avoid
+ ;; multibyte->unibyte conversion in `insert-buffer'.
+ (set-buffer-multibyte nil)
+ (setq subfile-size (buffer-size))
(set-buffer tar-superior-buffer)
(let* ((tokens (tar-desc-tokens descriptor))
(start (tar-desc-data-start descriptor))
(size (tar-header-size tokens))
(size-pad (ash (ash (+ size 511) -9) 9))
(head (memq descriptor tar-parse-info))
- (following-descs (cdr head)))
+ (following-descs (cdr head))
+ (tar-buffer-multibyte enable-multibyte-characters))
(if (not head)
(error "Can't find this tar file entry in its parent tar file!"))
(unwind-protect
(save-excursion
(widen)
+ (set-buffer-multibyte nil)
;; delete the old data...
- (let* ((data-start (+ start tar-header-offset -1))
+ (let* ((data-start (+ start (- tar-header-offset (point-min))))
(data-end (+ data-start (ash (ash (+ size 511) -9) 9))))
(delete-region data-start data-end)
;; insert the new data...
(goto-char data-start)
(insert-buffer subfile)
+ (setq subfile-size
+ (encode-coding-region
+ data-start (+ data-start subfile-size) coding))
;;
;; pad the new data out to a multiple of 512...
(let ((subfile-size-pad (ash (ash (+ subfile-size 511) -9) 9)))
;; update the data pointer of this and all following files...
(tar-setf (tar-header-size tokens) subfile-size)
(let ((difference (- subfile-size-pad size-pad)))
- (tar-dolist (desc following-descs)
+ (dolist (desc following-descs)
(tar-setf (tar-desc-data-start desc)
(+ (tar-desc-data-start desc) difference))))
;;
;; alter the descriptor-line...
;;
(let ((position (- (length tar-parse-info) (length head))))
- (goto-char 1)
+ (goto-char (point-min))
(next-line position)
(beginning-of-line)
(let ((p (point))
(setq after (point))
;; Insert the new text after the old, before deleting,
;; to preserve the window start.
- (insert-before-markers (tar-header-block-summarize tokens t) "\n")
+ (let ((line (tar-header-block-summarize tokens t)))
+ (if (multibyte-string-p line)
+ (insert-before-markers (string-as-unibyte line) "\n")
+ (insert-before-markers line "\n")))
(delete-region p after)
(setq tar-header-offset (marker-position m)))
)))
;; after doing the insertion, add any final padding that may be necessary.
(tar-pad-to-blocksize))
- (narrow-to-region 1 tar-header-offset)))
+ (narrow-to-region (point-min) tar-header-offset)
+ (set-buffer-multibyte tar-buffer-multibyte)))
(set-buffer-modified-p t) ; mark the tar file as modified
+ (tar-next-line 0)
(set-buffer subfile)
+ ;; Restore the buffer multibyteness.
+ (set-buffer-multibyte subfile-multibyte)
(set-buffer-modified-p nil) ; mark the tar subfile as unmodified
(message "Saved into tar-buffer `%s'. Be sure to save that buffer!"
(buffer-name tar-superior-buffer))
+ ;; Prevent basic-save-buffer from changing our coding-system.
+ (setq last-coding-system-used buffer-file-coding-system)
;; Prevent ordinary saving from happening.
t)))
+;; When this function is called, it is sure that the buffer is unibyte.
(defun tar-pad-to-blocksize ()
"If we are being anal about tar file blocksizes, fix up the current buffer.
Leaves the region wide."
;; (tar-pad-to-blocksize)
;; tar-header-offset turns out to be null for files fetched with W3,
;; at least.
- (write-region (or tar-header-offset (point-min)) (point-max)
- buffer-file-name nil t)
+ (let ((coding-system-for-write 'no-conversion))
+ (write-region (if tar-header-offset
+ (byte-to-position tar-header-offset)
+ (point-min))
+ (point-max)
+ buffer-file-name nil t))
(tar-clear-modification-flags)
(set-buffer-modified-p nil))
- (narrow-to-region 1 tar-header-offset))
- ;; return T because we've written the file.
+ (narrow-to-region (point-min) (byte-to-position tar-header-offset)))
+ ;; Return t because we've written the file.
t)
-
-(defun tar-quit ()
- "Kill the current tar buffer."
- (interactive)
- (kill-buffer nil))
-
\f
(provide 'tar-mode)
+;;; arch-tag: 8a585a4a-340e-42c2-89e7-d3b1013a4b78
;;; tar-mode.el ends here