Some things in set last_known_column_point to -1
to mark the memorized value as invalid. */
-static EMACS_INT last_known_column;
+static ptrdiff_t last_known_column;
/* Value of point when current_column was called. */
-EMACS_INT last_known_column_point;
+ptrdiff_t last_known_column_point;
/* Value of MODIFF when current_column was called. */
-static int last_known_column_modified;
+static EMACS_INT last_known_column_modified;
-static EMACS_INT current_column_1 (void);
-static EMACS_INT position_indentation (ptrdiff_t);
+static ptrdiff_t current_column_1 (void);
+static ptrdiff_t position_indentation (ptrdiff_t);
/* Cache of beginning of line found by the last call of
current_column. */
-static EMACS_INT current_column_bol_cache;
+static ptrdiff_t current_column_bol_cache;
/* Get the display table to use for the current buffer. */
characters immediately following, then *NEXT_BOUNDARY_P
will equal the return value. */
-EMACS_INT
-skip_invisible (EMACS_INT pos, EMACS_INT *next_boundary_p, EMACS_INT to, Lisp_Object window)
+ptrdiff_t
+skip_invisible (ptrdiff_t pos, ptrdiff_t *next_boundary_p, ptrdiff_t to, Lisp_Object window)
{
Lisp_Object prop, position, overlay_limit, proplimit;
Lisp_Object buffer, tmp;
- EMACS_INT end;
+ ptrdiff_t end;
int inv_p;
XSETFASTINT (position, pos);
last_known_column_point = 0;
}
-EMACS_INT
+ptrdiff_t
current_column (void)
{
- register EMACS_INT col;
+ register ptrdiff_t col;
register unsigned char *ptr, *stop;
register int tab_seen;
- EMACS_INT post_tab;
+ ptrdiff_t post_tab;
register int c;
int tab_width = SANE_TAB_WIDTH (current_buffer);
int ctl_arrow = !NILP (BVAR (current_buffer, ctl_arrow));
while (1)
{
- EMACS_INT i, n;
+ ptrdiff_t i, n;
Lisp_Object charvec;
if (ptr == stop)
next_element_from_display_vector does it. */
Lisp_Object entry = AREF (charvec, i);
- if (GLYPH_CODE_P (entry)
- && GLYPH_CODE_CHAR_VALID_P (entry))
+ if (GLYPH_CODE_P (entry))
c = GLYPH_CODE_CHAR (entry);
else
c = ' ';
in ENDPOS.
Otherwise just return -1. */
static int
-check_display_width (EMACS_INT pos, EMACS_INT col, EMACS_INT *endpos)
+check_display_width (ptrdiff_t pos, ptrdiff_t col, ptrdiff_t *endpos)
{
Lisp_Object val, overlay;
{ /* FIXME: Use calc_pixel_width_or_height. */
Lisp_Object plist = XCDR (val), prop;
int width = -1;
+ EMACS_INT align_to_max =
+ (col < MOST_POSITIVE_FIXNUM - INT_MAX
+ ? (EMACS_INT) INT_MAX + col
+ : MOST_POSITIVE_FIXNUM);
- if ((prop = Fplist_get (plist, QCwidth), NATNUMP (prop)))
+ if ((prop = Fplist_get (plist, QCwidth),
+ RANGED_INTEGERP (0, prop, INT_MAX)))
width = XINT (prop);
- else if (FLOATP (prop))
+ else if (FLOATP (prop) && 0 <= XFLOAT_DATA (prop)
+ && XFLOAT_DATA (prop) <= INT_MAX)
width = (int)(XFLOAT_DATA (prop) + 0.5);
- else if ((prop = Fplist_get (plist, QCalign_to), NATNUMP (prop)))
+ else if ((prop = Fplist_get (plist, QCalign_to),
+ RANGED_INTEGERP (col, prop, align_to_max)))
width = XINT (prop) - col;
- else if (FLOATP (prop))
+ else if (FLOATP (prop) && col <= XFLOAT_DATA (prop)
+ && (XFLOAT_DATA (prop) <= align_to_max))
width = (int)(XFLOAT_DATA (prop) + 0.5) - col;
if (width >= 0)
{
- EMACS_INT start;
+ ptrdiff_t start;
if (OVERLAYP (overlay))
*endpos = OVERLAY_POSITION (OVERLAY_END (overlay));
else
PREVCOL gets set to the column of the previous position (it's always
strictly smaller than the goal column). */
static void
-scan_for_column (EMACS_INT *endpos, EMACS_INT *goalcol, EMACS_INT *prevcol)
+scan_for_column (ptrdiff_t *endpos, EMACS_INT *goalcol, ptrdiff_t *prevcol)
{
int tab_width = SANE_TAB_WIDTH (current_buffer);
register int ctl_arrow = !NILP (BVAR (current_buffer, ctl_arrow));
struct window *w;
/* Start the scan at the beginning of this line with column number 0. */
- register EMACS_INT col = 0, prev_col = 0;
+ register ptrdiff_t col = 0, prev_col = 0;
EMACS_INT goal = goalcol ? *goalcol : MOST_POSITIVE_FIXNUM;
- EMACS_INT end = endpos ? *endpos : PT;
- EMACS_INT scan, scan_byte;
- EMACS_INT next_boundary;
+ ptrdiff_t end = endpos ? *endpos : PT;
+ ptrdiff_t scan, scan_byte;
+ ptrdiff_t next_boundary;
{
- EMACS_INT opoint = PT, opoint_byte = PT_BYTE;
+ ptrdiff_t opoint = PT, opoint_byte = PT_BYTE;
scan_newline (PT, PT_BYTE, BEGV, BEGV_BYTE, -1, 1);
current_column_bol_cache = PT;
scan = PT, scan_byte = PT_BYTE;
/* Occasionally we may need to skip invisible text. */
while (scan == next_boundary)
{
- EMACS_INT old_scan = scan;
+ ptrdiff_t old_scan = scan;
/* This updates NEXT_BOUNDARY to the next place
where we might need to skip more invisible text. */
scan = skip_invisible (scan, &next_boundary, end, Qnil);
prev_col = col;
{ /* Check display property. */
- EMACS_INT endp;
+ ptrdiff_t endp;
int width = check_display_width (scan, col, &endp);
if (width >= 0)
{
&& VECTORP (DISP_CHAR_VECTOR (dp, c)))
{
Lisp_Object charvec;
- EMACS_INT i, n;
+ ptrdiff_t i, n;
/* This character is displayed using a vector of glyphs.
Update the column/position based on those glyphs. */
next_element_from_display_vector does it. */
Lisp_Object entry = AREF (charvec, i);
- if (GLYPH_CODE_P (entry)
- && GLYPH_CODE_CHAR_VALID_P (entry))
+ if (GLYPH_CODE_P (entry))
c = GLYPH_CODE_CHAR (entry);
else
c = ' ';
This function handles characters that are invisible
due to text properties or overlays. */
-static EMACS_INT
+static ptrdiff_t
current_column_1 (void)
{
EMACS_INT col = MOST_POSITIVE_FIXNUM;
- EMACS_INT opoint = PT;
+ ptrdiff_t opoint = PT;
scan_for_column (&opoint, &col, NULL);
return col;
(Lisp_Object column, Lisp_Object minimum)
{
EMACS_INT mincol;
- register EMACS_INT fromcol;
+ register ptrdiff_t fromcol;
int tab_width = SANE_TAB_WIDTH (current_buffer);
CHECK_NUMBER (column);
(void)
{
Lisp_Object val;
- EMACS_INT opoint = PT, opoint_byte = PT_BYTE;
+ ptrdiff_t opoint = PT, opoint_byte = PT_BYTE;
scan_newline (PT, PT_BYTE, BEGV, BEGV_BYTE, -1, 1);
return val;
}
-static EMACS_INT
+static ptrdiff_t
position_indentation (ptrdiff_t pos_byte)
{
- register EMACS_INT column = 0;
+ register ptrdiff_t column = 0;
int tab_width = SANE_TAB_WIDTH (current_buffer);
register unsigned char *p;
register unsigned char *stop;
unsigned char *start;
- EMACS_INT next_boundary_byte = pos_byte;
- EMACS_INT ceiling = next_boundary_byte;
+ ptrdiff_t next_boundary_byte = pos_byte;
+ ptrdiff_t ceiling = next_boundary_byte;
p = BYTE_POS_ADDR (pos_byte);
/* STOP records the value of P at which we will need
{
while (p == stop)
{
- EMACS_INT stop_pos_byte;
+ ptrdiff_t stop_pos_byte;
/* If we have updated P, set POS_BYTE to match.
The first time we enter the loop, POS_BYTE is already right. */
return column;
if (pos_byte == next_boundary_byte)
{
- EMACS_INT next_boundary;
- EMACS_INT pos = BYTE_TO_CHAR (pos_byte);
+ ptrdiff_t next_boundary;
+ ptrdiff_t pos = BYTE_TO_CHAR (pos_byte);
pos = skip_invisible (pos, &next_boundary, ZV, Qnil);
pos_byte = CHAR_TO_BYTE (pos);
next_boundary_byte = CHAR_TO_BYTE (next_boundary);
preceding line. */
int
-indented_beyond_p (EMACS_INT pos, EMACS_INT pos_byte, EMACS_INT column)
+indented_beyond_p (ptrdiff_t pos, ptrdiff_t pos_byte, EMACS_INT column)
{
- EMACS_INT val;
- EMACS_INT opoint = PT, opoint_byte = PT_BYTE;
+ ptrdiff_t val;
+ ptrdiff_t opoint = PT, opoint_byte = PT_BYTE;
SET_PT_BOTH (pos, pos_byte);
while (PT > BEGV && FETCH_BYTE (PT_BYTE) == '\n')
The return value is the current column. */)
(Lisp_Object column, Lisp_Object force)
{
- EMACS_INT pos;
- EMACS_INT col, prev_col;
+ ptrdiff_t pos, prev_col;
+ EMACS_INT col;
EMACS_INT goal;
CHECK_NATNUM (column);
if (!NILP (force) && col > goal)
{
int c;
- EMACS_INT pos_byte = PT_BYTE;
+ ptrdiff_t pos_byte = PT_BYTE;
DEC_POS (pos_byte);
c = FETCH_CHAR (pos_byte);
if (c == '\t' && prev_col < goal)
{
- EMACS_INT goal_pt, goal_pt_byte;
+ ptrdiff_t goal_pt, goal_pt_byte;
/* Insert spaces in front of the tab to reach GOAL. Do this
first so that a marker at the end of the tab gets
the scroll bars if they are turned on. */
struct position *
-compute_motion (EMACS_INT from, EMACS_INT fromvpos, EMACS_INT fromhpos, int did_motion, EMACS_INT to, EMACS_INT tovpos, EMACS_INT tohpos, EMACS_INT width, EMACS_INT hscroll, EMACS_INT tab_offset, struct window *win)
+compute_motion (ptrdiff_t from, EMACS_INT fromvpos, EMACS_INT fromhpos, int did_motion, ptrdiff_t to, EMACS_INT tovpos, EMACS_INT tohpos, EMACS_INT width, ptrdiff_t hscroll, int tab_offset, struct window *win)
{
register EMACS_INT hpos = fromhpos;
register EMACS_INT vpos = fromvpos;
- register EMACS_INT pos;
- EMACS_INT pos_byte;
+ register ptrdiff_t pos;
+ ptrdiff_t pos_byte;
register int c = 0;
int tab_width = SANE_TAB_WIDTH (current_buffer);
register int ctl_arrow = !NILP (BVAR (current_buffer, ctl_arrow));
= (INTEGERP (BVAR (current_buffer, selective_display))
? XINT (BVAR (current_buffer, selective_display))
: !NILP (BVAR (current_buffer, selective_display)) ? -1 : 0);
- int selective_rlen
+ ptrdiff_t selective_rlen
= (selective && dp && VECTORP (DISP_INVIS_VECTOR (dp))
? ASIZE (DISP_INVIS_VECTOR (dp)) : 0);
/* The next location where the `invisible' property changes, or an
overlay starts or ends. */
- EMACS_INT next_boundary = from;
+ ptrdiff_t next_boundary = from;
/* For computing runs of characters with similar widths.
Invariant: width_run_width is zero, or all the characters
from width_run_start to width_run_end have a fixed width of
width_run_width. */
- EMACS_INT width_run_start = from;
- EMACS_INT width_run_end = from;
- EMACS_INT width_run_width = 0;
+ ptrdiff_t width_run_start = from;
+ ptrdiff_t width_run_end = from;
+ ptrdiff_t width_run_width = 0;
Lisp_Object *width_table;
Lisp_Object buffer;
/* The next buffer pos where we should consult the width run cache. */
- EMACS_INT next_width_run = from;
+ ptrdiff_t next_width_run = from;
Lisp_Object window;
int multibyte = !NILP (BVAR (current_buffer, enable_multibyte_characters));
/* If previous char scanned was a wide character,
this is the column where it ended. Otherwise, this is 0. */
EMACS_INT wide_column_end_hpos = 0;
- EMACS_INT prev_pos; /* Previous buffer position. */
- EMACS_INT prev_pos_byte; /* Previous buffer position. */
+ ptrdiff_t prev_pos; /* Previous buffer position. */
+ ptrdiff_t prev_pos_byte; /* Previous buffer position. */
EMACS_INT prev_hpos = 0;
EMACS_INT prev_vpos = 0;
EMACS_INT contin_hpos; /* HPOS of last column of continued line. */
- EMACS_INT prev_tab_offset; /* Previous tab offset. */
- EMACS_INT continuation_glyph_width;
+ int prev_tab_offset; /* Previous tab offset. */
+ int continuation_glyph_width;
struct composition_it cmp_it;
{
while (pos == next_boundary)
{
- EMACS_INT pos_here = pos;
- EMACS_INT newpos;
+ ptrdiff_t pos_here = pos;
+ ptrdiff_t newpos;
/* Don't skip invisible if we are already at the margin. */
if (vpos > tovpos || (vpos == tovpos && hpos >= tohpos))
to be changed here. */
{
unsigned char *ovstr;
- EMACS_INT ovlen = overlay_strings (pos, win, &ovstr);
+ ptrdiff_t ovlen = overlay_strings (pos, win, &ovstr);
hpos += ((multibyte && ovlen > 0)
? strwidth ((char *) ovstr, ovlen) : ovlen);
}
if (hpos > width)
{
- int total_width = width + continuation_glyph_width;
+ EMACS_INT total_width = width + continuation_glyph_width;
int truncate = 0;
if (!NILP (Vtruncate_partial_width_windows)
want to skip over it for some other reason. */
if (common_width != 0)
{
- EMACS_INT run_end_hpos;
+ ptrdiff_t run_end_hpos;
/* Don't go past the final buffer posn the user
requested. */
/* We have to scan the text character-by-character. */
else
{
- EMACS_INT i, n;
+ ptrdiff_t i, n;
Lisp_Object charvec;
/* Check composition sequence. */
next_element_from_display_vector does it. */
Lisp_Object entry = AREF (charvec, i);
- if (GLYPH_CODE_P (entry)
- && GLYPH_CODE_CHAR_VALID_P (entry))
+ if (GLYPH_CODE_P (entry))
c = GLYPH_CODE_CHAR (entry);
else
c = ' ';
val_compute_motion.prevhpos = contin_hpos;
else
val_compute_motion.prevhpos = prev_hpos;
- /* We always handle all of them here; none of them remain to do. */
- val_compute_motion.ovstring_chars_done = 0;
/* Nonzero if have just continued a line */
val_compute_motion.contin = (contin_hpos && prev_hpos == 0);
struct window *w;
Lisp_Object bufpos, hpos, vpos, prevhpos;
struct position *pos;
- EMACS_INT hscroll, tab_offset;
+ ptrdiff_t hscroll;
+ int tab_offset;
CHECK_NUMBER_COERCE_MARKER (from);
CHECK_CONS (frompos);
CHECK_CONS (offsets);
CHECK_NUMBER_CAR (offsets);
CHECK_NUMBER_CDR (offsets);
+ if (! (0 <= XINT (XCAR (offsets)) && XINT (XCAR (offsets)) <= PTRDIFF_MAX
+ && 0 <= XINT (XCDR (offsets)) && XINT (XCDR (offsets)) <= INT_MAX))
+ args_out_of_range (XCAR (offsets), XCDR (offsets));
hscroll = XINT (XCAR (offsets));
tab_offset = XINT (XCDR (offsets));
}
static struct position val_vmotion;
struct position *
-vmotion (register EMACS_INT from, register EMACS_INT vtarget, struct window *w)
+vmotion (register ptrdiff_t from, register EMACS_INT vtarget, struct window *w)
{
- EMACS_INT hscroll = XINT (w->hscroll);
+ ptrdiff_t hscroll = XINT (w->hscroll);
struct position pos;
/* vpos is cumulative vertical position, changed as from is changed */
- register int vpos = 0;
- EMACS_INT prevline;
- register EMACS_INT first;
- EMACS_INT from_byte;
- EMACS_INT lmargin = hscroll > 0 ? 1 - hscroll : 0;
- EMACS_INT selective
+ register EMACS_INT vpos = 0;
+ ptrdiff_t prevline;
+ register ptrdiff_t first;
+ ptrdiff_t from_byte;
+ ptrdiff_t lmargin = hscroll > 0 ? 1 - hscroll : 0;
+ ptrdiff_t selective
= (INTEGERP (BVAR (current_buffer, selective_display))
- ? XINT (BVAR (current_buffer, selective_display))
+ ? clip_to_bounds (-1, XINT (BVAR (current_buffer, selective_display)),
+ PTRDIFF_MAX)
: !NILP (BVAR (current_buffer, selective_display)) ? -1 : 0);
Lisp_Object window;
- EMACS_INT start_hpos = 0;
int did_motion;
/* This is the object we use for fetching character properties. */
Lisp_Object text_prop_object;
TEXT_PROP_MEANS_INVISIBLE (propval))))
prevline = find_next_newline_no_quit (prevline - 1, -1);
pos = *compute_motion (prevline, 0,
- lmargin + (prevline == BEG ? start_hpos : 0),
+ lmargin,
0,
from,
/* Don't care for VPOS... */
/* ... nor HPOS. */
1 << (BITS_PER_SHORT - 1),
-1, hscroll,
- /* This compensates for start_hpos
- so that a tab as first character
- still occupies 8 columns. */
- (prevline == BEG ? -start_hpos : 0),
+ 0,
w);
vpos -= pos.vpos;
first = 0;
val_vmotion.hpos = lmargin;
val_vmotion.contin = 0;
val_vmotion.prevhpos = 0;
- val_vmotion.ovstring_chars_done = 0;
- val_vmotion.tab_offset = 0; /* For accumulating tab offset. */
return &val_vmotion;
}
TEXT_PROP_MEANS_INVISIBLE (propval))))
prevline = find_next_newline_no_quit (prevline - 1, -1);
pos = *compute_motion (prevline, 0,
- lmargin + (prevline == BEG
- ? start_hpos : 0),
+ lmargin,
0,
from,
/* Don't care for VPOS... */
/* ... nor HPOS. */
1 << (BITS_PER_SHORT - 1),
-1, hscroll,
- (prevline == BEG ? -start_hpos : 0),
+ 0,
w);
did_motion = 1;
}
else
{
- pos.hpos = lmargin + (from == BEG ? start_hpos : 0);
+ pos.hpos = lmargin;
pos.vpos = 0;
- pos.tab_offset = 0;
did_motion = 0;
}
return compute_motion (from, vpos, pos.hpos, did_motion,
ZV, vtarget, - (1 << (BITS_PER_SHORT - 1)),
-1, hscroll,
- pos.tab_offset - (from == BEG ? start_hpos : 0),
+ 0,
w);
}
}
else
{
- EMACS_INT it_start;
- int first_x, it_overshoot_count = 0;
+ ptrdiff_t it_start, it_overshoot_count = 0;
+ int first_x;
int overshoot_handled = 0;
itdata = bidi_shelve_cache ();
/* Do this even if LINES is 0, so that we move back to the
beginning of the current line as we ought. */
if (XINT (lines) == 0 || IT_CHARPOS (it) > 0)
- move_it_by_lines (&it, max (INT_MIN, XINT (lines)));
+ move_it_by_lines (&it, max (PTRDIFF_MIN, XINT (lines)));
}
else if (overshoot_handled)
{
it.vpos = 0;
- move_it_by_lines (&it, min (INT_MAX, XINT (lines)));
+ move_it_by_lines (&it, min (PTRDIFF_MAX, XINT (lines)));
}
else
{
move_it_by_lines (&it, 1);
}
if (XINT (lines) > 1)
- move_it_by_lines (&it, min (INT_MAX, XINT (lines) - 1));
+ move_it_by_lines (&it, min (PTRDIFF_MAX, XINT (lines) - 1));
}
else
{
it.vpos = 0;
- move_it_by_lines (&it, min (INT_MAX, XINT (lines)));
+ move_it_by_lines (&it, min (PTRDIFF_MAX, XINT (lines)));
}
}