/* Indentation functions.
- Copyright (C) 1985,86,87,88,93,94,95,98, 2000, 2001, 2002
- Free Software Foundation, Inc.
+ Copyright (C) 1985, 1986, 1987, 1988, 1993, 1994, 1995, 1998, 2000, 2001,
+ 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This file is part of GNU Emacs.
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
#include <config.h>
#include "lisp.h"
Lisp_Object window;
{
Lisp_Object prop, position, overlay_limit, proplimit;
- Lisp_Object buffer;
+ Lisp_Object buffer, tmp;
int end, inv_p;
XSETFASTINT (position, pos);
/* No matter what. don't go past next overlay change. */
if (XFASTINT (overlay_limit) < XFASTINT (proplimit))
proplimit = overlay_limit;
- end = XFASTINT (Fnext_single_property_change (position, Qinvisible,
- buffer, proplimit));
+ tmp = Fnext_single_property_change (position, Qinvisible,
+ buffer, proplimit);
+ end = XFASTINT (tmp);
#if 0
/* Don't put the boundary in the middle of multibyte form if
there is no actual property change. */
doc: /* Return the horizontal position of point. Beginning of line is column 0.
This is calculated by adding together the widths of all the displayed
representations of the character between the start of the previous line
-and point. (eg control characters will have a width of 2 or 4, tabs
-will have a variable width)
+and point (eg. control characters will have a width of 2 or 4, tabs
+will have a variable width).
Ignores finite width of frame, which means that this function may return
values greater than (frame-width).
Whether the line is visible (if `selective-display' is t) has no effect;
-however, ^M is treated as end of line when `selective-display' is t. */)
+however, ^M is treated as end of line when `selective-display' is t.
+Text that has an invisible property is considered as having width 0, unless
+`buffer-invisibility-spec' specifies that it is replaced by an ellipsis. */)
()
{
Lisp_Object temp;
/* If the buffer has overlays, text properties,
or multibyte characters, use a more general algorithm. */
if (BUF_INTERVALS (current_buffer)
- || !NILP (current_buffer->overlays_before)
- || !NILP (current_buffer->overlays_after)
+ || current_buffer->overlays_before
+ || current_buffer->overlays_after
|| Z != Z_BYTE)
return current_column_1 ();
int b, e;
if (NILP (end))
- e = XSTRING (string)->size;
+ e = SCHARS (string);
else
{
CHECK_NUMBER (end);
}
/* Make a pointer for decrementing through the chars before point. */
- ptr = XSTRING (string)->data + e;
+ ptr = SDATA (string) + e;
/* Make a pointer to where consecutive chars leave off,
going backwards from point. */
- stop = XSTRING (string)->data + b;
+ stop = SDATA (string) + b;
if (tab_width <= 0 || tab_width > 1000) tab_width = 8;
\f
DEFUN ("indent-to", Findent_to, Sindent_to, 1, 2, "NIndent to column: ",
doc: /* Indent from point with tabs and spaces until COLUMN is reached.
-Optional second argument MININUM says always do at least MININUM spaces
-even if that goes past COLUMN; by default, MININUM is zero. */)
+Optional second argument MINIMUM says always do at least MINIMUM spaces
+even if that goes past COLUMN; by default, MINIMUM is zero. */)
(column, minimum)
Lisp_Object column, minimum;
{
WIDTH is the number of columns available to display text;
compute_motion uses this to handle continuation lines and such.
+ If WIDTH is -1, use width of window's text area adjusted for
+ continuation glyph when needed.
+
HSCROLL is the number of columns not being displayed at the left
margin; this is usually taken from a window's hscroll member.
TAB_OFFSET is the number of columns of the first tab that aren't
window_width - 1
- (has_vertical_scroll_bars
- ? FRAME_SCROLL_BAR_COLS (XFRAME (window->frame))
- : (window_width + window_left != frame_width))
+ ? WINDOW_CONFIG_SCROLL_BAR_COLS (window)
+ : (window_width + window_left != frame_cols))
where
- window_width is XFASTINT (w->width),
- window_left is XFASTINT (w->left),
+ window_width is XFASTINT (w->total_cols),
+ window_left is XFASTINT (w->left_col),
has_vertical_scroll_bars is
- FRAME_HAS_VERTICAL_SCROLL_BARS (XFRAME (WINDOW_FRAME (window)))
- and frame_width = FRAME_WIDTH (XFRAME (window->frame))
+ WINDOW_HAS_VERTICAL_SCROLL_BAR (window)
+ and frame_cols = FRAME_COLS (XFRAME (window->frame))
- Or you can let window_internal_width do this all for you, and write:
- window_internal_width (w) - 1
+ Or you can let window_box_text_cols do this all for you, and write:
+ window_box_text_cols (w) - 1
The `-1' accounts for the continuation-line backslashes; the rest
accounts for window borders if the window is split horizontally, and
= (INTEGERP (current_buffer->selective_display)
? XINT (current_buffer->selective_display)
: !NILP (current_buffer->selective_display) ? -1 : 0);
- int prev_hpos = 0;
int selective_rlen
= (selective && dp && VECTORP (DISP_INVIS_VECTOR (dp))
? XVECTOR (DISP_INVIS_VECTOR (dp))->size : 0);
int wide_column_end_hpos = 0;
int prev_pos; /* Previous buffer position. */
int prev_pos_byte; /* Previous buffer position. */
+ int prev_hpos = 0;
+ int prev_vpos = 0;
int contin_hpos; /* HPOS of last column of continued line. */
int prev_tab_offset; /* Previous tab offset. */
+ int continuation_glyph_width;
XSETBUFFER (buffer, current_buffer);
XSETWINDOW (window, win);
if (tab_width <= 0 || tab_width > 1000)
tab_width = 8;
+ /* Negative width means use all available text columns. */
+ if (width < 0)
+ {
+ width = window_box_text_cols (win);
+ /* We must make room for continuation marks if we don't have fringes. */
+#ifdef HAVE_WINDOW_SYSTEM
+ if (!FRAME_WINDOW_P (XFRAME (win->frame)))
+#endif
+ width -= 1;
+ }
+
+ continuation_glyph_width = 1;
+#ifdef HAVE_WINDOW_SYSTEM
+ if (FRAME_WINDOW_P (XFRAME (win->frame)))
+ continuation_glyph_width = 0; /* In the fringe. */
+#endif
+
immediate_quit = 1;
QUIT;
pos = prev_pos;
pos_byte = prev_pos_byte;
hpos = prev_hpos;
+ vpos = prev_vpos;
tab_offset = prev_tab_offset;
}
break;
{
if (hscroll
|| (truncate_partial_width_windows
- && width + 1 < FRAME_WIDTH (XFRAME (WINDOW_FRAME (win))))
+ && ((width + continuation_glyph_width)
+ < FRAME_COLS (XFRAME (WINDOW_FRAME (win)))))
|| !NILP (current_buffer->truncate_lines))
{
/* Truncating: skip to newline, unless we are already past
if (pos >= next_boundary)
next_boundary = pos + 1;
prev_hpos = width;
+ prev_vpos = vpos;
prev_tab_offset = tab_offset;
}
}
vpos++;
contin_hpos = prev_hpos;
prev_hpos = 0;
+ prev_vpos = vpos;
}
}
pos = prev_pos;
pos_byte = prev_pos_byte;
hpos = prev_hpos;
+ vpos = prev_vpos;
tab_offset = prev_tab_offset;
/* NOTE on contin_hpos, hpos, and prev_hpos.
hpos = contin_hpos;
vpos = vpos - 1;
}
- else if (c == '\n')
- /* If previous character is NEWLINE,
- set VPOS back to previous line */
- vpos = vpos - 1;
break;
}
pos = prev_pos;
pos_byte = prev_pos_byte;
hpos = prev_hpos;
+ vpos = prev_vpos;
tab_offset = prev_tab_offset;
}
break;
break;
prev_hpos = hpos;
+ prev_vpos = vpos;
prev_pos = pos;
prev_pos_byte = pos_byte;
wide_column_end_hpos = 0;
hpos -= hscroll;
/* Count the truncation glyph on column 0 */
if (hscroll > 0)
- hpos++;
+ hpos += continuation_glyph_width;
tab_offset = 0;
}
contin_hpos = 0;
to position TO or position TOPOS--another cons of the form (HPOS . VPOS)--
and return the ending buffer position and screen location.
+If TOPOS is nil, the actual width and height of the window's
+text area are used.
+
There are three additional arguments:
WIDTH is the number of columns available to display text;
-this affects handling of continuation lines.
-This is usually the value returned by `window-width', less one (to allow
-for the continuation glyph).
+this affects handling of continuation lines. A value of nil
+corresponds to the actual number of available text columns.
OFFSETS is either nil or a cons cell (HSCROLL . TAB-OFFSET).
HSCROLL is the number of columns not being displayed at the left
Lisp_Object from, frompos, to, topos;
Lisp_Object width, offsets, window;
{
+ struct window *w;
Lisp_Object bufpos, hpos, vpos, prevhpos;
struct position *pos;
int hscroll, tab_offset;
CHECK_NUMBER_CAR (frompos);
CHECK_NUMBER_CDR (frompos);
CHECK_NUMBER_COERCE_MARKER (to);
- CHECK_CONS (topos);
- CHECK_NUMBER_CAR (topos);
- CHECK_NUMBER_CDR (topos);
- CHECK_NUMBER (width);
+ if (!NILP (topos))
+ {
+ CHECK_CONS (topos);
+ CHECK_NUMBER_CAR (topos);
+ CHECK_NUMBER_CDR (topos);
+ }
+ if (!NILP (width))
+ CHECK_NUMBER (width);
+
if (!NILP (offsets))
{
CHECK_CONS (offsets);
window = Fselected_window ();
else
CHECK_LIVE_WINDOW (window);
+ w = XWINDOW (window);
if (XINT (from) < BEGV || XINT (from) > ZV)
args_out_of_range_3 (from, make_number (BEGV), make_number (ZV));
pos = compute_motion (XINT (from), XINT (XCDR (frompos)),
XINT (XCAR (frompos)), 0,
- XINT (to), XINT (XCDR (topos)),
- XINT (XCAR (topos)),
- XINT (width), hscroll, tab_offset,
+ XINT (to),
+ (NILP (topos)
+ ? window_internal_height (w)
+ : XINT (XCDR (topos))),
+ (NILP (topos)
+ ? (window_box_text_cols (w)
+ - (
+#ifdef HAVE_WINDOW_SYSTEM
+ FRAME_WINDOW_P (XFRAME (w->frame)) ? 0 :
+#endif
+ 1))
+ : XINT (XCAR (topos))),
+ (NILP (width) ? -1 : XINT (width)),
+ hscroll, tab_offset,
XWINDOW (window));
XSETFASTINT (bufpos, pos->bufpos);
register int from, vtarget;
struct window *w;
{
- int width = window_internal_width (w) - 1;
int hscroll = XINT (w->hscroll);
struct position pos;
/* vpos is cumulative vertical position, changed as from is changed */
register int vpos = 0;
- Lisp_Object prevline;
+ int prevline;
register int first;
int from_byte;
int lmargin = hscroll > 0 ? 1 - hscroll : 0;
{
Lisp_Object propval;
- XSETFASTINT (prevline, find_next_newline_no_quit (from - 1, -1));
- while (XFASTINT (prevline) > BEGV
+ prevline = find_next_newline_no_quit (from - 1, -1);
+ while (prevline > BEGV
&& ((selective > 0
- && indented_beyond_p (XFASTINT (prevline),
- CHAR_TO_BYTE (XFASTINT (prevline)),
+ && indented_beyond_p (prevline,
+ CHAR_TO_BYTE (prevline),
(double) selective)) /* iftc */
- /* watch out for newlines with `invisible' property */
- || (propval = Fget_char_property (prevline,
+ /* Watch out for newlines with `invisible' property.
+ When moving upward, check the newline before. */
+ || (propval = Fget_char_property (make_number (prevline - 1),
Qinvisible,
text_prop_object),
TEXT_PROP_MEANS_INVISIBLE (propval))))
- XSETFASTINT (prevline,
- find_next_newline_no_quit (XFASTINT (prevline) - 1,
- -1));
- pos = *compute_motion (XFASTINT (prevline), 0,
- lmargin + (XFASTINT (prevline) == BEG
- ? start_hpos : 0),
+ prevline = find_next_newline_no_quit (prevline - 1, -1);
+ pos = *compute_motion (prevline, 0,
+ lmargin + (prevline == BEG ? start_hpos : 0),
0,
from,
/* Don't care for VPOS... */
1 << (BITS_PER_SHORT - 1),
/* ... nor HPOS. */
1 << (BITS_PER_SHORT - 1),
- width, hscroll,
+ -1, hscroll,
/* This compensates for start_hpos
so that a tab as first character
still occupies 8 columns. */
- (XFASTINT (prevline) == BEG
- ? -start_hpos : 0),
+ (prevline == BEG ? -start_hpos : 0),
w);
vpos -= pos.vpos;
first = 0;
- from = XFASTINT (prevline);
+ from = prevline;
}
/* If we made exactly the desired vertical distance,
{
Lisp_Object propval;
- XSETFASTINT (prevline, find_next_newline_no_quit (from, -1));
- while (XFASTINT (prevline) > BEGV
+ prevline = find_next_newline_no_quit (from, -1);
+ while (prevline > BEGV
&& ((selective > 0
- && indented_beyond_p (XFASTINT (prevline),
- CHAR_TO_BYTE (XFASTINT (prevline)),
+ && indented_beyond_p (prevline,
+ CHAR_TO_BYTE (prevline),
(double) selective)) /* iftc */
- /* watch out for newlines with `invisible' property */
- || (propval = Fget_char_property (prevline, Qinvisible,
+ /* Watch out for newlines with `invisible' property.
+ When moving downward, check the newline after. */
+ || (propval = Fget_char_property (make_number (prevline),
+ Qinvisible,
text_prop_object),
TEXT_PROP_MEANS_INVISIBLE (propval))))
- XSETFASTINT (prevline,
- find_next_newline_no_quit (XFASTINT (prevline) - 1,
- -1));
- pos = *compute_motion (XFASTINT (prevline), 0,
- lmargin + (XFASTINT (prevline) == BEG
+ prevline = find_next_newline_no_quit (prevline - 1, -1);
+ pos = *compute_motion (prevline, 0,
+ lmargin + (prevline == BEG
? start_hpos : 0),
0,
from,
1 << (BITS_PER_SHORT - 1),
/* ... nor HPOS. */
1 << (BITS_PER_SHORT - 1),
- width, hscroll,
- (XFASTINT (prevline) == BEG ? -start_hpos : 0),
+ -1, hscroll,
+ (prevline == BEG ? -start_hpos : 0),
w);
did_motion = 1;
}
}
return compute_motion (from, vpos, pos.hpos, did_motion,
ZV, vtarget, - (1 << (BITS_PER_SHORT - 1)),
- width, hscroll,
+ -1, hscroll,
pos.tab_offset - (from == BEG ? start_hpos : 0),
w);
}
XSETBUFFER (w->buffer, current_buffer);
}
- SET_TEXT_POS (pt, PT, PT_BYTE);
- start_display (&it, w, pt);
-
- /* Move to the start of the line containing PT. If we don't do
- this, we start moving with IT->current_x == 0, while PT is really
- at some x > 0. The effect is, in continuation lines, that we end
- up with the iterator placed at where it thinks X is 0, while the
- end position is really at some X > 0, the same X that PT had. */
- move_it_by_lines (&it, 0, 0);
+ if (noninteractive)
+ {
+ struct position pos;
+ pos = *vmotion (PT, XINT (lines), w);
+ SET_PT_BOTH (pos.bufpos, pos.bytepos);
+ }
+ else
+ {
+ int it_start;
+ int oselective;
+ int it_overshoot_expected_p;
+
+ SET_TEXT_POS (pt, PT, PT_BYTE);
+ start_display (&it, w, pt);
+
+ /* Scan from the start of the line containing PT. If we don't
+ do this, we start moving with IT->current_x == 0, while PT is
+ really at some x > 0. The effect is, in continuation lines, that
+ we end up with the iterator placed at where it thinks X is 0,
+ while the end position is really at some X > 0, the same X that
+ PT had. */
+ it_start = IT_CHARPOS (it);
+
+ /* We expect the call to move_it_to, further down, to overshoot
+ if the starting point is on an image, stretch glyph, or Lisp
+ string. We won't need to backtrack in this situation, except
+ for one corner case: when the Lisp string contains a
+ newline. */
+ if (it.method == GET_FROM_STRING)
+ {
+ const char *s = SDATA (it.string);
+ const char *e = s + SBYTES (it.string);
- if (XINT (lines) != 0)
- move_it_by_lines (&it, XINT (lines), 0);
+ while (s < e && *s != '\n')
+ ++s;
- SET_PT_BOTH (IT_CHARPOS (it), IT_BYTEPOS (it));
+ it_overshoot_expected_p = (s == e);
+ }
+ else
+ it_overshoot_expected_p = (it.method == GET_FROM_IMAGE
+ || it.method == GET_FROM_STRETCH);
+
+ reseat_at_previous_visible_line_start (&it);
+ it.current_x = it.hpos = 0;
+ /* Temporarily disable selective display so we don't move too far */
+ oselective = it.selective;
+ it.selective = 0;
+ move_it_to (&it, PT, -1, -1, -1, MOVE_TO_POS);
+ it.selective = oselective;
+
+ /* Move back if we got too far. This may happen if
+ truncate-lines is on and PT is beyond right margin.
+ Don't go back if the overshoot is expected (see above). */
+ if (IT_CHARPOS (it) > it_start && XINT (lines) > 0
+ && !it_overshoot_expected_p)
+ move_it_by_lines (&it, -1, 0);
+
+ it.vpos = 0;
+ /* Do this even if LINES is 0, so that we move back
+ to the beginning of the current line as we ought. */
+ if (XINT (lines) >= 0 || IT_CHARPOS (it) > 0)
+ move_it_by_lines (&it, XINT (lines), 0);
+
+ SET_PT_BOTH (IT_CHARPOS (it), IT_BYTEPOS (it));
+ }
if (BUFFERP (old_buffer))
w->buffer = old_buffer;
defsubr (&Svertical_motion);
defsubr (&Scompute_motion);
}
+
+/* arch-tag: 9adfea44-71f7-4988-8ee3-96da15c502cc
+ (do not change this comment) */