;;; simple.el --- basic editing commands for Emacs
-;; Copyright (C) 1985-1987, 1993-2012 Free Software Foundation, Inc.
+;; Copyright (C) 1985-1987, 1993-2013 Free Software Foundation, Inc.
;; Maintainer: FSF
;; Keywords: internal
(when (and (not end)
delete-trailing-lines
;; Really the end of buffer.
- (save-restriction (widen) (eobp))
+ (= (point-max) (1+ (buffer-size)))
(<= (skip-chars-backward "\n") -2))
(delete-region (1+ (point)) end-marker))
(set-marker end-marker nil))))
(defun just-one-space (&optional n)
"Delete all spaces and tabs around point, leaving one space (or N spaces).
-If N is negative, delete newlines as well."
+If N is negative, delete newlines as well, leaving -N spaces."
(interactive "*p")
(unless n (setq n 1))
(let ((orig-pos (point))
;; Aaron S. Hawley <aaron.s.hawley(at)gmail.com> 2009-08-24
"Read function name, then read its arguments and call it.
-To pass a numeric argument to the command you are invoking with, specify
+To pass a numeric argument to the command you are invoking, specify
the numeric argument to this command.
Noninteractively, the argument PREFIXARG is the prefix argument to
give to the command you invoke, if it asks for an argument."
(interactive (list current-prefix-arg (read-extended-command)))
;; Emacs<24 calling-convention was with a single `prefixarg' argument.
- (if (null command-name) (setq command-name (read-extended-command)))
+ (if (null command-name)
+ (setq command-name (let ((current-prefix-arg prefixarg)) ; for prompt
+ (read-extended-command))))
(let* ((function (and (stringp command-name) (intern-soft command-name)))
(binding (and suggest-key-bindings
(not executing-kbd-macro)
falling back to `default-process-coding-system' if no match for COMMAND
is found in `process-coding-system-alist'.
-The noninteractive arguments are START, END, COMMAND,
-OUTPUT-BUFFER, REPLACE, ERROR-BUFFER, and DISPLAY-ERROR-BUFFER.
Noninteractive callers can specify coding systems by binding
`coding-system-for-read' and `coding-system-for-write'.
in the echo area or in a buffer.
If the output is short enough to display in the echo area
\(determined by the variable `max-mini-window-height' if
-`resize-mini-windows' is non-nil), it is shown there. Otherwise
-it is displayed in the buffer `*Shell Command Output*'. The output
-is available in that buffer in both cases.
+`resize-mini-windows' is non-nil), it is shown there.
+Otherwise it is displayed in the buffer `*Shell Command Output*'.
+The output is available in that buffer in both cases.
If there is output and an error, a message about the error
-appears at the end of the output.
-
-If there is no output, or if output is inserted in the current buffer,
-then `*Shell Command Output*' is deleted.
-
-If the optional fourth argument OUTPUT-BUFFER is non-nil,
-that says to put the output in some other buffer.
-If OUTPUT-BUFFER is a buffer or buffer name, put the output there.
-If OUTPUT-BUFFER is not a buffer and not nil,
-insert output in the current buffer.
-In either case, the output is inserted after point (leaving mark after it).
-
-If REPLACE, the optional fifth argument, is non-nil, that means insert
-the output in place of text from START to END, putting point and mark
+appears at the end of the output. If there is no output, or if
+output is inserted in the current buffer, the buffer `*Shell
+Command Output*' is deleted.
+
+Optional fourth arg OUTPUT-BUFFER specifies where to put the
+command's output. If the value is a buffer or buffer name, put
+the output there. Any other value, including nil, means to
+insert the output in the current buffer. In either case, the
+output is inserted after point (leaving mark after it).
+
+Optional fifth arg REPLACE, if non-nil, means to insert the
+output in place of text from START to END, putting point and mark
around it.
-If optional sixth argument ERROR-BUFFER is non-nil, it is a buffer
-or buffer name to which to direct the command's standard error output.
-If it is nil, error output is mingled with regular output.
-If DISPLAY-ERROR-BUFFER is non-nil, display the error buffer if there
-were any errors. (This is always t, interactively.)
-In an interactive call, the variable `shell-command-default-error-buffer'
-specifies the value of ERROR-BUFFER."
+Optional sixth arg ERROR-BUFFER, if non-nil, specifies a buffer
+or buffer name to which to direct the command's standard error
+output. If nil, error output is mingled with regular output.
+When called interactively, `shell-command-default-error-buffer'
+is used for ERROR-BUFFER.
+
+Optional seventh arg DISPLAY-ERROR-BUFFER, if non-nil, means to
+display the error buffer if there were any errors. When called
+interactively, this is t."
(interactive (let (string)
(unless (mark)
(error "The mark is not set now, so there is no region"))
(defcustom set-mark-default-inactive nil
"If non-nil, setting the mark does not activate it.
-This causes \\[set-mark-command] and \\[exchange-point-and-mark] to
-behave the same whether or not `transient-mark-mode' is enabled."
+This option does the same thing as disabling Transient Mark mode,
+and it will be removed in the near future."
:type 'boolean
:group 'editing-basics
:version "23.1")
+(make-obsolete-variable 'set-mark-default-inactive nil "24.3")
(defun set-mark-command (arg)
"Set the mark where point is, or jump to the mark.
You can also deactivate the mark by typing \\[keyboard-quit] or
\\[keyboard-escape-quit].
-Many commands change their behavior when Transient Mark mode is in effect
-and the mark is active, by acting on the region instead of their usual
-default part of the buffer's text. Examples of such commands include
-\\[comment-dwim], \\[flush-lines], \\[keep-lines], \
+Many commands change their behavior when Transient Mark mode is
+in effect and the mark is active, by acting on the region instead
+of their usual default part of the buffer's text. Examples of
+such commands include \\[comment-dwim], \\[flush-lines], \\[keep-lines],
\\[query-replace], \\[query-replace-regexp], \\[ispell], and \\[undo].
-Invoke \\[apropos-documentation] and type \"transient\" or
-\"mark.*active\" at the prompt, to see the documentation of
-commands which are sensitive to the Transient Mark mode."
+To see the documentation of commands which are sensitive to the
+Transient Mark mode, invoke \\[apropos-documentation] and type \"transient\"
+or \"mark.*active\" at the prompt."
:global t
;; It's defined in C/cus-start, this stops the d-m-m macro defining it again.
:variable transient-mark-mode)
(unless (and auto-window-vscroll try-vscroll
;; Only vscroll for single line moves
(= (abs arg) 1)
+ ;; Under scroll-conservatively, the display engine
+ ;; does this better.
+ (zerop scroll-conservatively)
;; But don't vscroll in a keyboard macro.
(not defining-kbd-macro)
(not executing-kbd-macro)
(point))))
(defun choose-completion-delete-max-match (string)
+ (declare (obsolete choose-completion-guess-base-position "23.2"))
(delete-region (choose-completion-guess-base-position string) (point)))
-(make-obsolete 'choose-completion-delete-max-match
- 'choose-completion-guess-base-position "23.2")
(defvar choose-completion-string-functions nil
"Functions that may override the normal insertion of a completion choice.
(if (if (eq normal-erase-is-backspace 'maybe)
(and (not noninteractive)
(or (memq system-type '(ms-dos windows-nt))
- (memq window-system '(ns))
+ (memq window-system '(w32 ns))
(and (memq window-system '(x))
(fboundp 'x-backspace-delete-keys-p)
(x-backspace-delete-keys-p))
and `view-read-only' is non-nil, enter view mode.
Do not call this from a Lisp program unless you really intend to
-do the same thing as the \\[toggle-read-only] command, including
+do the same thing as the \\[read-only-mode] command, including
possibly enabling or disabling View mode. Also, note that this
command works by setting the variable `buffer-read-only', which
does not affect read-only regions caused by text properties. To