Emacs machines list
Copyright (C) 1989, 1990, 1992, 1993, 1998, 2001, 2002, 2003, 2004,
- 2005, 2006, 2007 Free Software Foundation, Inc.
+ 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
See the end of the file for license conditions.
This is a list of the status of GNU Emacs on various machines and systems.
configuration name(s) should select your new machine description and
system description files.
+Some obsolete platforms are unsupported beginning with Emacs 23.1, see
+the full list at the end of this file.
+
\f
Here are the configurations Emacs is intended to work with, with the
corresponding configuration names. You can postpend version numbers
hppa1.1). If you leave out the version number, the `configure' script
will configure Emacs for the latest version it knows about.
-Acorn RISCiX (arm-acorn-riscix1.2)
-
- Emacs 19.29 has changes that ought to support RISCiX 1.2.
-
- Due to a bug in the RISCiX C compiler (3.4.5), emacs must
- be built with gcc (versions 2.5.8 onwards).
-
- In addition, you will need GNU sed and GNU make, as the RISCiX release
- versions of these utilities cannot cope with building emacs-19!
-
- GNU sed should be configured with:
-
- env 'DEFS=-Dgetopt=gnu_getopt -Dopterr=gnu_opterr -Doptind=gnu_optind \
- -Doptarg=gnu_optarg' ./configure
-
- GNU make (3.72+) should be configured with:
-
- env 'CFLAGS=-Dgetopt=gnu_getopt -Dopterr=gnu_opterr -Doptind=gnu_optind \
- -Doptarg=gnu_optarg' ./configure
-
- Emacs may be configured to use the X toolkit, by adding --with-x-toolkit
- to the configure command. If you do this, you will need to edit the line
- in src/Makefile which defines LIBW (about line 59) to read:
-
- LIBW= -lXaw_n
-
- This ensures that the non-shared widget library is used.
-
- It is unlikely that this version of emacs will work with RISCiX 1.1.
-
-Alliant (fx80-alliant-bsd):
-
- 18.52 worked on system version 4. Previous Emacs versions were
- known to work on previous system versions.
-
- If you are using older versions of their operating system, you may
- need to edit `src/config.h' to use `m/alliant1.h' (on version 1) or
- `m/alliant.h' (on versions 2 and 3).
-
-Alliant FX/2800 (i860-alliant-bsd)
-
- Known to work with 19.26 and OS version 2.2, compiler version 1.3.
-
-Alpha (DEC) running OSF/1 or GNU/Linux (alpha-dec-osf1, alpha-dec-linux-gnu)
-
- For OSF/1 (aka Digital Unix) version 4.0, update 386,
- it is reported that you need to run configure this way:
-
- configure --x-includes=/usr/include --x-libraries=/usr/shlib
+Alpha (DEC) running GNU/Linux (alpha-dec-linux-gnu)
DEC C compiler version 5.9 (DEC C V5.9-005 on Digital UNIX V4.0f)
is reported to produce bogus binaries of Emacs 21.2 when the
said to have bugs that prevent Emacs from working with X (as of
November 1995). Recent releases work (July 2000).
-Altos 3068 (m68k-altos-sysv)
-
- 18.52 was said to work, provided you don't compile unexec.c with -O.
-
-Amdahl UTS (580-amdahl-sysv)
-
- Small changes for 18.38 were merged in 18.39. It is mostly
- working, but at last report a bug sometimes causes Emacs to
- grab very large amounts of memory. No fix or explanation
- has yet been reported. It may be possible to find this bug
- if you find which Emacs command it happens within and then
- run that command with a breakpoint set at malloc.
-
- The 5.2u370 compiler is so brain damaged that it is not
- even worth trying to use it. Success was obtained with the
- uts native C compiler on uts version 5.2.5.
-
Apple Macintosh running Mac OS X
- For installation on all versions of the Mac OS platform, see the file
- mac/INSTALL.
+ For installation instructions see the file nextstep/INSTALL.
Apple PowerPC Macintosh running GNU/Linux
After that, reconfigure and rebuild Emacs. It should now build
successfully.
-Apollo running X Windows (m68k-apollo-bsd)
-
- Apollo version now supports dumping. It has been tested on SR10.3 and
- SR10.4. It certainly requires at least SR10.0, and maybe SR10.2. Be sure
- to build in the BSD environment.
-
- By default, everything is compiled with the switch "-W0,-opt,2". Don't try
- to change this to full optimization (-O). The full optimizer (in Domain CC
- 6.7, 6.8 and 6.9) generates some bad code in several modules which causes
- the emacs window, under X, to be refreshed with each keystroke.
-
- The configuration stuff should work for the most part. However, some Domain
- installations may have to edit src/Makefile manually after it is created.
- There are too many versions of both cc and X to automate this easily.
-
- In `lib-src/Makefile', emacsclient compiles and works fine under CC 6.9.
- It now probably works under other versions of the compiler, as well.
-
- The Apollo Domain CC compiler will issue quite a few warning messages,
- mostly complaining about incompatible pointers. In general, these are
- harmless and can be ignored. If you discover otherwise, please submit a bug
- report identifying the problem in detail.
-
- When you try to dump emacs, you may get the message ".rwdi section needs
- relocation." This means you are linking with some code that has compressed
- data sections. In some cases this comes from linking with X libraries. Try
- using shared X libraries instead. With some versions of Domain/OS this is
- as simple as removing the "-lX11" from the LIBX line in src/Makefile.
-
- When running the configure script, use the configuration name
- "m68k-apollo-bsd". You will also need to use the "-with-gcc=no" and
- "-with-x" options. Depending upon your site configuration, you may have to
- use other configure options, as well. Examine the INSTALL file for other
- configure options.
-
- Check out the file 'lisp/x-apollo.el'. To use it, add
-
- (load "x-apollo")
-
- to your .emacs file. It provides useful default Apollo function key
- bindings.
-
-AT&T 3b2, 3b5, 3b15, 3b20 (we32k-att-sysv)
-
- Emacs will probably not work with certain kernel constants too small.
-
- In param.h CDLIMIT should be at least (1L << 12) in order to allow
- processes to write up to 2 Mbyte files. This parameter is configurable
- by normal means in /etc/master.d/kernel; examine that file for the
- symbol CDLIMIT or ULIMIT, and raise it by several powers of 2. Then
- do normal kernel rebuild things via "cd /boot; mkboot -k KERNEL" and so
- forth.
-
- In seg.h NSEGP and STACKSEG should be at least 16 and 4 respectively
- to allow processes with total size of up to 2Mbytes.
- However, I'm told it is unlikely this would fail to be true.
-
- The MAXMEM may also prevent Emacs from running. The file
- 3B-MAXMEM in this directory explains how to increase MAXMEM.
-
- On some of these machines, you may need to define IN_SCCS_ID
- in config.h to make Emacs work. Supposedly you can tell whether
- this is necessary by checking something in /usr/include/sys/time.h;
- we do not know precisely what.
-
-AT&T 7300 or 3b1 (m68k-att-sysv)
-
- 18.52 worked. If you have strange troubles with dumping
- Emacs, delete the last few lines from `src/m/7300.h' and recompile.
- These lines are supposed to produce a sharable executable.
-
- `src/m/7300.h' defines SHORTNAMES because operating system versions
- older than 3.5 did not support long symbol names. Version 3.5 does
- support them, so you can remove the #define SHORTNAMES in that
- version.
-
-Bull DPX/2 models 2nn or 3nn (m68k-bull-sysv3)
-
- Minor fixes merged into 19.19, which should work with CC or GCC.
-
- You should compile with all the POSIX stuff: undef _SYSV and define
- _POSIX_SOURCE, _XOPEN_SOURCE and _BULL_SOURCE.
-
- On bos2.00.45 there is a bug that makes the F_SETOWN fcntl
- call enters in an infinite loop. F_SETOWN_BUG has been defined to avoid
- calling it.
-
-Bull DPX/20 (rs6000-bull-bosx)
-
- Version 19 works.
-
-Bull sps7 (m68k-bull-sysv2)
-
- Changes partially merged in version 19, but some fixes are probably required.
-
-CCI 5/32, 6/32
-
- See "Tahoe".
-
-Celerity (celerity-celerity-bsd4.2)
-
- Version 18.49 worked. This configuration name is a hack, because we
- don't know the processor used by Celerities. If someone
- who uses a Celerity could get in touch with us, we can teach
- config.sub a better name for the configuration.
-
-Clipper (clipper-???)
-
- Version 19 has support for some brand of clipper system. If you
- have successfully built Emacs 19 on some sort of clipper system, let
- us know so we can flesh out this entry.
-
- Note that the Orion 105 is also a clipper, but some system-related
- parameters are different.
-
-Convex (c1-convex-bsd, c2-convex-bsd, c32-convex-bsd, c34-convex-bsd,
- c38-convex-bsd)
-
- Support updated and residual bugs fixed in 19.26.
-
Cubix QBx/386 (i386-cubix-sysv)
Changes merged in 19.1. Systems before 2/A/0 may fail to compile etags.c
due to a compiler bug.
-Cydra 5 (cydra-cydrome-sysv)
-
- 18.51 worked in one version of their operating system but stopped
- working in a newer version. This has not been fixed.
-
-Data General Aviion (m88k-dg-dgux)
-
- 19.23 works; however, the GCC provided with DGUX 5.4R3.00 fails to
- compile src/emacs.c. GCC 2.5.8 does work.
- The 19.26 pretest was reported to work; no word on which compiler.
- System versions other than DGUX 5.4R3.00 have not been tested.
-
- DGUX 5.4R3.10 works with 19.29 and 19.30.
-
- DGUX R4.11 contains changes to the stdio internals and it doesn't work
- with versions before 20.2 without patches. 20.2 works in interactive
- mode but usually fails in batch mode. The problem is that using
- stderr in the dumped emacs usually leads to a segmentation fault.
- Only m88k has been tested.
-
-DECstation (mips-dec-ultrix or mips-dec-osf)
-
- This machine is the older Mips-based DECstation.
- Emacs should now work on the Alpha CPU.
-
- 19.25 works on Ultrix 4.2. The 19.26 pretest was reported to work
- on Ultrix 4.2a and on 4.4.
-
- One user reported 19.25 did not work at all with --with-x-toolkit
- using X11R5 patch level 10, but worked ok with X11R5 pl26.
-
- See under Ultrix for problems using X windows on Ultrix.
- Note that this is a MIPS machine.
-
- For Ultrix versions 4.1 or earlier, you may need to define
- SYSTEM_MALLOC in `src/m/pmax.h', because XvmsAlloc.o in libX11.a seems
- to insist on defining malloc itself.
-
- For Ultrix versions prior to 4.0, you may need to delete
- the definition of START_FILES from `src/m/pmax.h'.
-
Motorola Delta 147 (m68k-motorola-sysv)
The EMacs 19.26 pretest was reported to work.
The installation script chooses the compiler itself. gnucc is
preferred.
-Motorola Delta 187 (m88k-motorola-sysv,
- m88k-motorola-sysvr4, or
- m88k-motorola-m88kbcs)
-
- The 19.26 pretest was reported to run on SVR3. However, if you
- use --with-x-toolkit on svr3, you will have problems compiling some
- files because time.h and sys/time.h get included twice.
- One fix is to edit those files to protect against multiple inclusion.
-
- As of version 19.13, Emacs was reported to run under SYSVr3 and SYSVr4.
-
-Dual running System V (m68k-dual-sysv)
-
- As of 17.46, this worked except for a few changes
- needed in unexec.c.
-
-Dual running Uniplus (m68k-dual-uniplus)
-
- Worked, as of 17.51.
-
-Elxsi 6400 (elxsi-elxsi-sysv)
-
- Changes for 12.0 release are in 19.1.
- Dumping should work now.
-
-Encore machine (ns16k-encore-bsd)
-
- This machine bizarrely uses 4.2BSD modified to use the COFF format
- for object files. Works (as of 18.40). For the APC processor you
- must enable two lines at the end of `src/s/umax.h', which are commented
- out in the file as distributed.
-
- WARNING: If you compile Emacs with the "-O" compiler switch, you
- must also use the "-q enter_exits" switch so that all functions have
- stack frames. Otherwise routines that call `alloca' all lose.
-
- A kernel bug in some system versions causes input characters to be lost
- occasionally.
-
Fujitsu DS/90 (sparc-fujitsu-sysv4)
Changes merged in 20.3.
-GEC 63 (local-gec63-usg5.2)
-
- Changes are partially merged in version 18, but certainly require
- more work. Let us know if you get this working, and we'll give it a
- real configuration name.
-
-Gould Power Node (pn-gould-bsd4.2 or pn-gould-bsd4.3)
-
- 18.36 worked on versions 1.2 and 2.0 of the operating system.
-
- On UTX/32 2.0, use pn-gould-bsd4.3.
-
- On UTX/32 1.2 and UTX/32S 1.0, use pn-gould-bsd4.2 and note that
- compiling `lib-src/sorted-doc' tickles a compiler bug: remove the -g
- flag to cc in the makefile.
-
- UTX/32 1.3 has a bug in the bcopy library routine. Fix it by
- #undef BSTRING in `src/m/gould.h'.
-
- Version 19 incorporates support for releases 2.1 and later of UTX/32.
- A site running a pre-release of 2.1 should #define RELEASE2_1 in config.h.
-
-Gould NP1 (np1-gould-bsd)
-
- Version 19 supposedly works.
-
-Harris Night Hawk (m68k-harris-cxux or m88k-harris-cxux)
-
- This port was added in 19.23. The configuration actually tested was
- a Night Hawk 4800 running CX/UX 7.0.
-
- If you have GCC ported and want to build with it, you probably need to
- change things (like compiler switches) defined in the s/cxux.h file.
-
- If you have X11R6 installed in /usr/lib, configure will fail to find
- it and may find X11R5 instead. To work around this problem, use
- --x-libraries=/usr/lib when you run configure.
-
- With CX/UX 7.0 and later releases, you need to build after setting the
- SDE_TARGET environment variable to COFF (a port using ELF and shared
- libraries has not yet been done).
-
-Harris Power PC (powerpc-harris-powerunix)
-
- Patches have been merged in 19.31.
-
-Honeywell XPS100 (xps100-honeywell-sysv)
-
- Config file added in version 19.
-
-Hewlett-Packard 9000 series 200 or 300 (m68k-hp-bsd or m68k-hp-hpux
- or m68k-hp-netbsd)
-
- These machines are 68000-series CPUs running HP/UX
- (a derivative of sysV with some BSD features) or BSD 4.3 ported by Utah.
- The operating system suffix determines which system Emacs is built for.
-
- Series 200 HPUX runs Emacs only if it has the "HP/UX upgrade".
-
- Version 19 works under BSD. The 19.26 pretest was reported
- to work on HPUX 9. 19.31 works on HPUX 10.01, but there are
- some problems on 10.10 which have not been resolved. Emacs 19.34
- works on HPUX 10.20 provided you compile with GCC; with the HP C
- compiler, subprocess commands do not work.
-
- On HPUX 9, Emacs sometimes crashes with SIGBUS or SIGSEGV after you
- delete a frame. We think this is due to a bug in the X libraries
- provided by HP. With the alternative X libraries in
- /usr/contrib/mitX11R5/lib, the problem does not happen.
-
- If you are running HP/UX release 8.0 or later, you need the optional
- "C/ANSI C" software in order to build Emacs (older releases of HP/UX
- do not require any special software). If the file "/etc/filesets/C"
- exists on your machine, you have this software, otherwise you do not.
-
- Note that HP has used two incompatible assembler syntaxes,
- and has recently changed the format of C function frames.
- `src/crt0.c' and `src/alloca.s' have been conditionalised for the new
- assembler and new function-entry sequence. You may need to define
- OLD_HP_ASSEMBLER if you are using an older hpux version. If you
- have an official (bought from HP) series 300 machine you have
- the new assembler. Kernels that are 5.+ or later have new
- assembler. A Series 200 that has been upgraded to a 68010
- processor and a 5.+ kernel has the new compiler.
-
- Define C_SWITCH_MACHINE to be +X to make a version of Emacs that
- runs on both 68010 and 68020 based HP/UX's.
-
- Define HPUX_68010 if you are using the new assembler, for
- a system that has a 68010 without a 68881. This is to say,
- a s200 (upgraded) or s310.
-
- Define the symbol HPUX_NET if you have the optional network features
- that include the `netunam' system call. This is referred to as
- Network Services (NS/9000) in HP literature.
-
-HP 9000 series 500: not supported.
-
- The series 500 has a seriously incompatible memory architecture
- which relocates data in memory during execution of a program,
- and support for it would be difficult to implement.
-
HP 9000 series 700 or 800 (Spectrum) (hppa1.0-hp-hpux or hppa1.1-hp-hpux
- or ...hpux9shr, or ...-nextstep)
+ or ...hpux9shr)
Use hppa1.1 for the 700 series and hppa1.0 for the 800
series machines. (Emacs may not actually care which one you use.)
- Support for NextSTEP was added in 19.31.
-
Emacs 20 may work on HPUX 10. You need patch PHSS_6202 to install
the Xaw and Xmu libraries. On HPUX 10.20 you may need to compile with GCC;
when Emacs was compiled with HP's C compiler, HP92453-01 A.10.32.03,
do not require any special software). If the file "/etc/filesets/C"
exists on your machine, you have this software, otherwise you do not.
-High Level Hardware Orion (orion-highlevel-bsd)
-
- This is the original microprogrammed hardware.
- Machine description file ought to work.
-
-High Level Hardware Orion 1/05 (clipper-highlevel-bsd)
-
- Changes merged in 18.52. This is the one with the Clipper cpu.
- Note that systems which lack NFS need LOAD_AVE_TYPE changed to `double'.
-
- C compiler has a bug; it loops compiling eval.c.
- Compile it by hand without optimization.
-
-HITACHI SR2001/SR2201 series (hppa1.1-hitachi-hiuxwe2)
-
- These machines are based on PA architecture running HI-UX/MPP
- (based on OSF1. `MPP' stands for `Massively Parallel Processor').
-
- Emacs 19.34 is believed to work; its pretest was tested
- both on SR2001 (output of `uname -rv' is `00-01-BB 0') and
- SR2201 (`02-00 0').
-
- Emacs 20.7 was reported to build on a system whose `uname -rs'
- output is `HI-UX/MPP 03-04'.
-
- The machine description file is `src/m/sr2k.h' is based on
- `src/m/hp800.h'. The system description file is `src/s/hiuxwe2.h'
- based on `src/s/osf1.h'. Note that this system doesn't use COFF.
-
-IBM PS/2 (i386-ibm-aix1.1 or i386-ibm-aix1.2)
-
- Changes merged in version 19. You may need to copy
- /usr/lib/samples/hft/hftctl.c to the Emacs src directory.
-
- i386-ibm-aix1.1 may not work with certain new X window managers, and
- may be suboptimal.
-
IBM RS/6000 (rs6000-ibm-aix*)
Emacs 19.26 is believed to work; its pretest was tested.
As of 19.11, if you strip the Emacs executable, it ceases to work.
- If you are using AIX 3.2.3, you may get a core dump when loading
- ange-ftp. You may be able to fix the problem by defining LIBS_TERMCAP
- as -ltermcap -lcurses. Please tell us if this fails to work.
-
If anyone can fix the above problems, or confirm that they don't happen
with certain versions of various programs, we would appreciate it.
-IBM RT/PC (romp-ibm-bsd or romp-ibm-aix)
-
- Use romp-ibm-bsd for the 4.2-like system and romp-ibm-aix for AIX.
- 19.22 is reported to work under bsd. We don't know about AIX.
-
- On BSD, if you have trouble, try compiling with a different compiler.
-
- On AIX, the file /usr/lib/samples/hft/hftctl.c must be compiled into
- hftctl.o, with this result left in the src directory (hftctl.c is
- part of the standard AIX distribution).
-
- window.c must not be compiled with -O on AIX.
-
IBM System/390 running GNU/Linux (s390-*-linux-gnu)
As of Emacs 21.2, a 31-bit only version is supported on this
system.
-Integrated Solutions `Optimum V' (m68k-isi-bsd4.2 or -bsd4.3)
-
- 18.52 said to work on some sort of ISI machine.
- Version 18.45 worked (running on a Optimum V (VME bus, 68020)
- BSD 4.2 (3.05e) system). 18.42 is reported to work on
- a Qbus 68010 system. Has not been tried on `WorkStation' `Cluster
- Compute Node' `Cluster WorkStation' or `Server Node' (Love the
- StudLYCaps)
-
- Compilation with -O is rumored to break something.
-
- On recent system versions, you may need to undefine the macro UMAX
- in `lib-src/loadst.c' and `src/getpagesize.h'. They stupidly defined this
- in a system header file, which confuses Emacs (which thinks that UMAX
- indicates the Umax operating system).
-
-Intel 386 (i386-*-isc, i386-*-esix, i386-*-bsdi2,
- i386-*-xenix, i386-*-freebsd, i386-*-linux-gnu,
- i386-*-sol2.4, i386-*-sysv3, i386-intsys-sysv,
- i386-*-sysv4, i386-*-sysv4.2,
- i386-*-sysv5.3, i386-*-bsd4.2, i386-*-cygwin,
- i386-*-sco3.2v4, i386-*-bsd386, i386-*-386bsd,
+Intel 386 (i386-*-freebsd, i386-*-linux-gnu,
+ i386-*-sol2.4, i386-intsys-sysv,
+ i386-*-sysv4, i386-*-sysv4.2, i386-*-cygwin,
i386-*-msdos, i386-*-windowsnt.
i386... can be replaced with i486... or i586...)
you specify does not matter, and you can use any name you like
(but it should not contain any dashes or stars).
- When using the ISC configurations, be sure to specify the isc
- version number - for example, if you're running ISC 3.0, use
- i386-unknown-isc3.0 as your configuration name.
- Use i386-*-esix for Esix; Emacs runs as of version 19.6.
Use i386-*-linux-gnu for GNU/Linux systems; Emacs runs as of version 19.26.
Use i386-*-cygwin for Cygwin; Emacs builds as of version 22.1, in both X11
and non-X11 modes. (The Cygwin site has source and binaries for 21.2.)
Use i386-intsys-sysv for Integrated Solutions 386 machines.
It may also be correct for Microport systems.
- Use i386-*-sco3.2v4 for SCO 3.2v4; Emacs runs as of version 19.26.
On GNU/Linux systems, Emacs 19.23 was said to work properly with libc
version 4.5.21, but not with 4.5.19. If your system uses QMAGIC
19.29 is reported to crash when using Motif on Solaris 2.5.
The reasons are not yet known.
- Use i386-*-bsdiN for BSDI BSD/OS version N; Emacs runs as of version 19.23.
- In some system versions, `make' is broken; use GNU make instead.
- Shell bugs in version 1.0 of BSD/OS cause configure
- to do the wrong thing with --with-x-toolkit; the workaround is to edit
- configure to run another shell such as bash.
-
- For System V release 3, use i386-*-sysv3.
For System V release 4, use i386-*-sysv4.
For System V release 4.2, use i386-*-sysv4.2.
- If you are using Xenix, see notes at end under Xenix.
- If you are using Esix, see notes at end under Esix.
If you are using SCO Unix, see notes at end under SCO.
- On 386bsd, NetBSD and FreeBSD, at one time, it was necessary to use
+ On NetBSD and FreeBSD, at one time, it was necessary to use
GNU make, not the system's make. Assuming it's installed as gmake,
do `gmake install MAKE=gmake'. However, more recently it is
reported that using the system Make on NetBSD 1.3.1 works ok.
but no coherent explanation of why that might be so. If it is so,
in current versions of Linux, something else should probably be changed.
- Some sysV.3 systems seem to have bugs in `opendir';
- for them, alter `config.h' to define NONSYSTEM_DIR_LIBRARY
- and undefine SYSV_SYSTEM_DIR.
-
- If you use optimization on V.3, you may need the option -W2,'-y 0'
- to prevent certain faulty optimization.
-
- On 386/ix, to link with shared libraries, add #define USG_SHARED_LIBRARIES
- to config.h.
-
- On SCO, there are problems in regexp matching when Emacs is compiled
- with the system compiler. The compiler version is "Microsoft C
- version 6", SCO 4.2.0h Dev Sys Maintenance Supplement 01/06/93;
- Quick C Compiler Version 1.00.46 (Beta). The solution is to compile
- with GCC.
-
- On ISC systems (2.02 and more recent), don't try to use the versions
- of X that come with the system; use XFree86 instead.
-
- There is no consistency in the handling of certain system header files
- on V.3.
-
Some versions have sys/sioctl.h, and require it in sysdep.c.
But some versions do not have sys/sioctl.h.
For a given version of the system, this may depend on whether you have
but define `struct tc' instead; add `#define tchars tc'
to config.h to solve this problem.
-Iris 2500 and Iris 2500 Turbo (m68k-sgi-iris3.5 or m68k-sgi-iris3.6)
-
- Version 18 was said to work; use m68k-sgi-iris3.5 for system version 2.5
- and m68k-sgi-iris3.6 for system version 3.6.
- Note that the 3030 is the same as the Iris 2500 Turbo.
-
-Iris 4D (mips-sgi-irix[456].*)
+Iris 4D (mips-sgi-irix6.*)
Emacs 21.3 is reported to work on IRIX 6.5.x.
could also try reinstalling the same version of GCC, and telling us
whether that fixes the problem.
-Masscomp (m68k-masscomp-rtu)
-
- 18.36 worked on a 5500DP running RTU v3.1a and compiler version 3.2
- with minor fixes that are included in 18.37. However, bizarre behavior
- was reported for 18.36 on a Masscomp (model and version unknown but probably
- a 68020 system). The report sounds like a compiler bug.
-
- A compiler bug affecting statements like
- unsigned char k; unsigned char *p;... x = p[k];
- has been reported for "C version 1.2 under RTU 3.1". We do not wish
- to take the time to install the numerous workarounds required to
- compensate for this bug.
-
- For RTU version 3.1, define FIRST_PTY_LETTER to be 'p' in `src/s/rtu.h'
- (or #undef and redefine it in config.h) so that ptys will be used.
-
- GNU Emacs is said to have no chance of compiling on RTU versions
- prior to v3.0.
-
-Megatest (m68k-megatest-bsd)
-
- Emacs 15 worked; do not have any reports about Emacs 16 or 17
- but any new bugs are probably not difficult.
-
-Mips (mips-mips-riscos, mips-mips-riscos4.0, or mips-mips-bsd)
-
- The C compiler on Riscos 4.51 dumps core trying to optimize
- parts of Emacs. Try without optimization or try GCC.
-
- Meanwhile, the linker on that system returns success even if
- there are undefined symbols; as a result, configure gets the
- wrong answers to various questions. No work-around is known
- except to edit src/config.h by hand to indicate which functions
- don't exist.
-
- Use mips-mips-riscos4.0 for RISCOS version 4.
- Use mips-mips-bsd with the BSD world.
-
- Note that the proper configuration names for DECstations are
- mips-dec-ultrix and mips-dec-osf.
-
- If you are compiling with GCC, then you must run fixincludes;
- the alternative of using -traditional won't work because
- the definition of SIGN_EXTEND_CHAR uses the keyword `signed'.
-
- If the SYSV world is the default, then you probably need the following
- line in etc/Makefile:
-
- CFLAGS= -g -systype bsd43
-
- Some operating systems on MIPS machines give SIGTRAP for division by
- zero instead of the usual signals. The only real solution is to fix
- the system to give a proper signal.
-
- In the meantime, you can change init_data in data.c if you wish.
- Change it to handle SIGTRAP as well as SIGFPE. But this will have a
- great disadvantage: you will not be able to run Emacs under a
- debugger. I think crashing on division by zero is a lesser problem.
-
- dsg@mitre.org reported needing to use --x-libraries=/bsd43/usr/lib
- on a riscos4bsd site. But it is not clear whether this is needed in
- general or only because of quirks on a particular site.
-
-National Semiconductor 32000 (ns32k-ns-genix)
-
- This is for a complete machine from National Semiconductor,
- running Genix. Changes merged in version 19.
-
-NCR Tower 32 (m68k-ncr-sysv2 or m68k-ncr-sysv3)
-
- If you are running System V release 2, use m68k-ncr-sysv2.
- If you are running System V release 3, use m68k-ncr-sysv3.
-
- These both worked as of 18.56. If you change `src/ymakefile' so that
- CFLAGS includes C_OPTIMIZE_SWITCH rather than C_DEBUG_SWITCH, check
- out the comments in `src/m/tower32.h' (for System V release 2) or
- `src/m/tower32v3.h' (for System V release 3) about this.
-
- There is a report that compilation with -O did not work with 18.54
- under System V release 2.
-
NCR Intel system (i386-ncr-sysv4.2)
This system works in 19.31, but if you don't link it with GNU ld,
you may need to set LD_RUN_PATH at link time to specify where
to find the X libraries.
-NEC EWS4800 (mips-nec-sysv4)
-
- This system works in 20.4, but you should use the compiler
- /usr/abiccs/bin/cc (MIPS ABI MODE).
-
-NeXT (m68k-next-nextstep)
-
- Emacs 19 has not been tested extensively yet, but it seems to work
- in a NeXTStep 3.0 terminal window, and under the X server called
- co-Xist. You may need to specify -traditional when src/Makefile
- builds xmakefile.
-
- NeXT users might want to implement direct operation with NeXTStep,
- but from the point of view of the GNU project, that is a
- distraction.
-
- Thanks to Thorsten Ohl for working on the NeXT port of Emacs 19.
-
-Nixdorf Targon 31 (m68k-nixdorf-sysv)
-
- Machine description file for version 17 is included in 18
- but whether it works is not known.
- `src/unexec.c' bombs if compiled with -O.
- Note that the "Targon 35" is really a Pyramid.
-
-Nu (TI or LMI) (m68k-nu-sysv)
-
- Version 18 is believed to work.
-
-Paragon OSF/1 (i860-intel-osf1)
-
- Changes merged in 19.29.
-
- There is a bug in OSF/1 make which claims there is a syntax error
- in the src/xmakefile. You can successfully build emacs with:
-
- pmake MAKE=pmake
-
-Plexus (m68k-plexus-sysv)
-
- Worked as of 17.56.
-
-Pmax (DEC Mips) (mips-dec-ultrix or mips-dec-osf1)
-
- See under DECstation, above.
-
Prime EXL (i386-prime-sysv)
Minor changes merged in 19.1.
-Pyramid (pyramid-pyramid-bsd)
-
- The 19.26 pretest was observed to work on OSx 5.0, but it is necessary
- to edit gmalloc.c. You must add #include <sys/types.h> at the top,
- and delete the #define for size_t.
-
- You need to build Emacs in the Berkeley universe with
- the `ucb' command, as in `ucb make' or `ucb build-install'.
-
- In OSx 4.0, it seems necessary to add the following two lines
- to `src/m/pyramid.h':
- #define _longjmp longjmp
- #define _setjmp setjmp
-
- In Pyramid system 2.5 there has been a compiler bug making
- Emacs crash just after screen-splitting with Qnil containing 0.
- A compiler that fixes this is Pyramid customer number 8494,
- internal number 1923.
-
- Some versions of the pyramid compiler get fatal
- errors when the -gx compiler switch is used; if this
- happens to you, change `src/m/pyramid.h' to define
- C_DEBUG_SWITCH with an empty definition.
-
- Some old system versions may require you to define PYRAMID_OLD
- in when alloca.s is preprocessed, in order to define _longjmp and _setjmp.
-
-Sequent Balance (ns32k-sequent-bsd4.2 or ns32k-sequent-bsd4.3)
-
- Emacs 18.51 worked on system version 3.0. 18.52 is said to work.
- Delete some lines at the end of `src/m/sequent.h' for earlier system
- versions.
-
-Sequent Symmetry (i386-sequent-bsd, i386-sequent-ptx, i386-sequent-ptx4)
-
- 19.33 has changes to support ptx 4 (a modified SVR4).
-
- Emacs 19 should work on Dynix (BSD). However, if you compile with
- the Sequent compiler, you may find Emacs does not restore the
- terminal settings on exit. If this happens, compile with GCC.
-
- Emacs 19.27 contains patches that should support
- DYNIX/ptx 1.4 and 2.1 with the native cc compiler.
-
- GCC can't compile src/process.c due to a non-standard Sequent asm
- keyword extension supported by cc and used for the network byte/word
- swapping functions in the PTX /usr/include/netinet/in.h file. GCC
- 2.5.8 includes the file <sys/byteorder.h> which can be included into
- netinet/in.h to perform these byte/word swapping functions in the
- same manner. Patches have been submitted to the FSF against GCC
- 2.6.0 to fix this problem and allow Emacs to be built with GCC.
-
- If your machine does not have TCP/IP installed, you will have to edit the
- src/s/ptx.h file and comment out #define TCPIP_INSTALLED.
-
Siemens Nixdorf RM600 and RM400 (mips-siemens-sysv4)
- Changes merged in 19.29. This configuration should also work for
- Pyramid MIS Server running DC-OSX 1.x. The version configured with
+ Changes merged in 19.29. The version configured with
`--with-x' works without any modifications, but `--with-x-toolkit'
works only if the Athena library and the Toolkit library are linked
statically. For this, edit `src/Makefile' after the `configure' run
LIBW= /usr/lib/libXm.a /usr/ccs/lib/libgen.a
LIBXT= $(LIBW) -lXmu /usr/lib/libXt.a $(LIBXTR6) -lXext
-SONY News (m68k-sony-bsd4.2 or m68k-sony-bsd4.3)
-
- 18.52 worked. Use m68k-sony-bsd4.3 for system release 3.
-
-SONY News 3000 series (RISC NEWS) (mips-sony-bsd)
-
- The 19.26 pretest is reported to work.
-
- Some versions of the operating system give SIGTRAP for division by zero
- instead of the usual signals. This causes division by zero
- to make Emacs crash. The system should be fixed to give the proper signal.
- Changing Emacs is not a proper solution, because it would prevent
- Emacs from working under any debugger. But you can change init_data
- in data.c if you wish.
-
-Stardent i860 (i860-stardent-sysv4.0)
-
- 19.26 pretest reported to work.
-
-Stardent 1500 or 3000
-
- See Titan.
-
-Stride (m68k-stride-sysv)
-
- Works (most recent news for 18.30) on their release 2.0.
- For release 2.2, see the end of `src/m/stride.h'.
- It may be possible to run on their V.1 system but changes
- in the s- file would be needed.
-
-Sun 3, Sun 4 (sparc), Sun 386 (m68k-sun-sunos, sparc-sun-sunos, i386-sun-sunos,
- sparc-sun-sunos4.1.3noshr, sparc-sun-solaris2.*,
- i386-sun-solaris2.*, sparc*-*-linux-gnu)
+Sun 4 (sparc), Sun 386 (sparc-sun-solaris2.*,
+ i386-sun-solaris2.*, sparc*-*-linux-gnu)
To build a 32-bit Emacs (i.e. if you are having any sort of problem
bootstrapping a 64-bit version), you can use the Sun Studio compiler
There are reports that using SunSoft cc with -xO4 -xdepend produces
bad code for some part of Emacs.
- Emacs works ok Sunos 4.1.x
- provided you completely replace your C shared library
- using one of the SunOS 4.1.x jumbo replacement patches from Sun.
- Here are the patch numbers for Sunos 4.1.3:
- 100890-10 SunOS 4.1.3: domestic libc jumbo patch
- 100891-10 SunOS 4.1.3: international libc jumbo patch
-
Some people report that Emacs crashes immediately on startup when
used with a non-X terminal, but we think this is due to compiling
with GCC and failing to use GCC's "fixed" system header files.
for transferring text between clients. The Cut, Paste and Copy items
in the menu bar Edit menu work with the clipboard.
- It's important to include the SunOS version number in the
- configuration name. For example, for SunOS release 4.0 on a Sun 3,
- use `m68k-sun-sunos4.0'; for SunOS release 4.1 on a Sparc, use
- `sparc-sun-sunos4.1'. For SunOS release 4.1.3 on a Sparc, use
- `sparc-sun-sunos4.1.3'. Note that shared libraries are now
- used by default on SunOS 4.1.
-
A user reported irreproducible segmentation faults when using 19.29
on Solaris 2.3 and 2.4 after compiling it with the Sun compiler.
The problem went away when GCC 2.7.0 was used instead. We do not know
whether anything in Emacs is partly to blame for this.
- X11R6 is set up to make shared libraries only, on Sunos 4.
- Therefore, in order to link Emacs, you need to create static X libraries.
- To do this, rebuild X11 after setting
- #define ForceNormalLib YES
- #define SeparateSharedCompile YES
- in site.def (after #ifdef AfterVendorCF).
-
- Use `m68k' for the 68000-based Sun boxes, `sparc' for Sparcstations,
- and `i386' for Sun Roadrunners. i386 calls for Sunos4.0.
-
If you compile with Sun's ANSI compiler acc, you need additional options
when linking temacs, such as
/usr/lang/SC2.0.1/values-Xt.o -L/usr/lang/SC2.0.1/cg87 -L/usr/lang/SC2.0.1
add -lansi just before -lc. The precise file names depend on the
compiler version, so we cannot easily arrange to supply them.
- On SunOS 4.1.1, do not use /usr/5bin/cc. You can use gcc or/usr/bin/cc.
- Make sure the environment variable LD_LIBRARY_PATH is not defined.
-
- Some people report crashes on SunOS 4.1.3 if SYSTEM_MALLOC is defined.
- Others have reported that Emacs works if SYSTEM_MALLOC is defined, and not
- if it is undefined. So far we do not know why results vary in this way.
- The sources are set up so that SYSTEM_MALLOC is defined; if that crashes,
- or if you want the benefit of the relocating memory allocator, you can
- try enabling the #undef SYSTEM_MALLOC in src/s/sunos4-1-3.h.
-
On Solaris 2, you need to install patch 100947-02 to fix a system bug.
Presumably this patch comes from Sun. You must alter the definition of
LD_SWITCH_SYSTEM if your X11 libraries are not in /usr/openwin/lib.
You must make sure that /usr/ucblib is not in your LD_LIBRARY_PATH.
- On Solaris 2.2, with a multiprocessor SparcCenter 1000, Emacs 19.17 is
- reported to hang sometimes if it exits while it has one or more
- subprocesses (e.g. the `wakeup' subprocess used by `display-time').
- Emacs and its subprocesses become zombies, and in their zombie state
- slow down their host and disable rlogin and telnet. This is most
- likely due to a bug in Solaris 2.2's multiprocessor support,
- rather than an Emacs bug.
-
On Solaris, do not use /usr/ucb/cc. Use /opt/SUNWspro/bin/cc. Make
sure that /usr/ccs/bin and /opt/SUNWspro/bin are in your PATH before
/usr/ucb. (Most free software packages have the same requirement on
src/s/sunos4-1.h to src/config.h. This problem is due to obsolete
software in the nonshared standard library.
- If you want to use SunWindows, define HAVE_SUN_WINDOWS
- in config.h to enable a special interface called `emacstool'.
- The definition must *precede* the #include "machine.h".
- System version 3.2 is required for this facility to work.
-
- We recommend that you instead use the X window system, which
- has technical advantages, is an industry standard, and is also
- free software. The FSF does not support the SunWindows code;
- we installed it only on the understanding we would not let it
- divert our efforts from what we think is important.
-
- If you are compiling for X windows, and the X window library was
- compiled to use the 68881, then you must edit config.h according
- the comments at the end of `src/m/sun3.h'.
-
Note that Emacs on a Sun is not really as big as it looks.
As dumped, it includes around 200k of zeros between the
original text section and the original data section
(now remapped as part of the text). These are never
swapped in.
- To build a single Emacs that will run on Sun 2 and Sun 3
- HARDWARE, just build it on the Sun 2.
-
- On Sunos 4.1.3, the word is that Emacs can loop infinitely
- on startup with X due perhaps to a bug in Sunos. Installing all of
- these Sun patches fixes the problem. We don't know which of them
- are really relevant.
+SuperH (sh[34]*-*-linux-gnu)
- 100075-11 100224-06 100347-03 100482-05 100557-02 100623-03 100804-03
- 101080-01 100103-12 100249-09 100496-02 100564-07 100630-02 100891-10
- 101134-01 100170-09 100296-04 100377-09 100507-04 100567-04 100650-02
- 101070-01 101145-01 100173-10 100305-15 100383-06 100513-04 100570-05
- 100689-01 101071-03 101200-02 100178-09 100338-05 100421-03 100536-02
- 100584-05 100784-01 101072-01 101207-01
+ Emacs 23.0.60 was reported to work on GNU/Linux (October 2008).
+ Tested on a little-endian sh4 system (cpu type SH7751R) running
+ Gentoo Linux 2008.0.
Tadpole 68K (m68k-tadpole-sysv)
chmod 2755 etc/movemail; chgrp mail etc/movemail
-Tahoe (tahoe-tahoe-bsd4.2 or tahoe-tahoe-bsd4.3)
-
- 18.52 was known to work on some Tahoes, but a compiler bug intervenes
- on others. Some Emacs versions have worked in Unisys 1r4
- (not in 1r3) and CCI I.21.
-
- If you have trouble compiling `lib-src/loadst.c', turn off the definition
- of DKSTAT_HEADER_FILE in `src/m/tahoe.h'.
-
-Tandem Integrity S2 (mips-tandem-sysv)
-
- Changes merged in 18.56 but subprocess support is turned off.
- You will probably want to see if you can make subprocesses work.
-
- You must edit `lib-src/Makefile' to define LOADLIBES = -mld.
-
-Tektronix XD88 (m88k-tektronix-sysv3*)
-
- The 19.26 pretest was reported to work.
- Minor changes merged in 19.19.
-
-Tektronix 16000 box (6130?) (ns16k-tektronix-bsd)
-
- Emacs 17.61 worked.
-
-Tektronix 4300 (m68k-tektronix-bsd)
-
- Emacs 19.26 pretest reported to work.
-
-Titan P2 or P3 (titan-titan-sysv)
-
- Changes probably merged in version 19.
-
-Ustation E30 (SS5E) (m68k-unisys-unipl)
-
- Changes merged in 18.52; don't know whether they work.
-
-Vaxen running Berkeley Unix (vax-dec-bsd4.1, vax-dec-bsd4.2, vax-dec-bsd4.3),
- Ultrix (vax-dec-ultrix),
- System V (vax-dec-sysv0, vax-dec-sysv2), or
- VMS (vax-dec-vms)
+Vaxen running Berkeley Unix (vax-dec-bsd4.1, vax-dec-bsd4.2, vax-dec-bsd4.3)
Works.
-
- See under Ultrix for problems using X windows on Ultrix (vax-dec-ultrix).
-
- 18.27 worked on System V rel 2 (vax-dec-sysv2).
-
- 18.36 worked on System V rel 0 (vax-dec-sysv0).
-
- Richard Levitte <levitte@e.kth.se> distributes a set of patches to
- Emacs 18.59 to make it work nicely under VMS. Emacs 19 probably
- won't work very well, or even compile. Levitte is working on a
- port, so these problems should be fixed in the near future.
-
-Whitechapel MG1 (ns16k-whitechapel-?)
-
- May work. Supposedly no changes were needed except in `src/m/mg1.h'
- file. I do not know what Unix version runs on them.
-
-Wicat (m68k-wicat-sysv)
-
- Changes merged as of 18.6; whether they work is unknown.
- See comments in `src/m/wicat.h' for things you should change
- depending on the system and compiler version you have.
\f
Here are notes about some of the systems supported:
-Berkeley 4.1 (bsd4.1)
-
- Works on vaxes.
-
-Berkeley 4.2 (bsd4.2)
-
- Works on several machines.
-
-Berkeley 4.3 (bsd4.3)
-
- Works, on Vaxes at least.
-
-Esix
-
- The following was written for Emacs 18.59 and has been
- slightly adapted for Emacs 19. It may need more change to be correct.
-
- Use s/usg5-4.h for Esix System V 4.0.[34] systems if you also have
- XFree86. If you insist on using the Esix X Window libraries, good
- luck. s/esix5r4.h provides a starting point, but doesn't seem to
- work consistently. The basic problems involve the need to load
- -lX11 *last* in the link command, and even then some things break.
- You get best results by installing XFree86 and forgetting about the
- Esix stuff unless you want to run IXI xdt3, which really only needs
- the Esix X11 shared libraries.
-
- To compile with XFree86, make sure that your LD_LIBRARY_PATH
- contains /usr/X386/lib. Be careful if you also have the Esix X
- Window libraries that /usr/X386/lib appears *first* in the
- LD_LIBRARY_PATH. Then define C_SWITCH_X_SYSTEM -I/usr/X386/include.
-
Linux (actually GNU/Linux)
Most of the complete systems which use the Linux kernel are close
near the end of the file). See the "MS-DOS" chapter of the manual
for information about using Emacs on MSDOS.
-SCO Unix
- If you have TCP but not X, you need to edit src/s/sco4.h
- to define HAVE_SOCKETS.
-
- If you are using MMDF instead of sendmail, you need to remove
- /usr/lib/sendmail or modify lisp/paths.el before compiling.
- lisp/paths.el (which is loaded during the build) will attempt to use
- sendmail if it exists.
-
- If you are using SMAIL, you need to define the macro
- SMAIL in config.h.
-
-System V rel 0 (usg5.0)
-
- Works, on Vaxes and 3bxxx's.
- There are some problems in 18.37 due to shortnames/cccp problems:
- use the emacs 17 cpp if you have it.
-
-System V rel 2 (usg5.2)
-
- Works on various machines.
- On some (maybe all) machines the library -lPW exists and contains
- a version of `alloca'. On these machines, to use it, put
- #define HAVE_ALLOCA
- #define LIB_STANDARD -lPW -lc
- in the `src/m/MACHINENAME.h' file for the machine.
-
- If you find that the character Meta-DEL makes Emacs crash,
- find where function init_sys_modes in sysdep.c sets sg.c_cc[VQUIT]
- and make it store 7 there. I have as yet no evidence of whether
- this problem, known in HP/UX, exists in other system V versions.
-
-System V rel 2.2 (usg5.2.2)
-
- In 5.2.2 AT&T undid, incompatibly, their previous incompatible
- change to the way the nlist library is called. A different s- file
- is used to enable the other interface.
-
- They call themselves the right choice--can't they choose?
-
- Emacs version 18 unexec is currently not working properly
- on 5.2.2. Nobody knows why yet. A workaround is to define
- NO_REMAP. It is not yet known whether this applies to all
- machines running 5.2.2.
-
-System V rel 3 (usg5.3)
-
- Some versions of this system support ptys and BSD-style sockets.
- On such systems, you should define HAVE_PTYS and HAVE_SOCKETS in config.h.
-
- If you want to link Emacs with shared libraries, define
- USG_SHARED_LIBRARIES.
-
- You may have to add ANSI idempotence #-lines to your sys/types.h
- file to get Emacs to compile correctly. This may be necessary on
- other pre-ANSI systems as well.
-
- On an AT&T 6386WGS using System V Release 3.2 and X11R3, the X support
- cannot be made to work. Whether or not the GNU relocating malloc is
- used, the symptom is that the first call Emacs makes to sbrk(0) returns
- (char *)-1. Sorry, you're stuck with character-only mode. Try
- installing XFree86 to fix this.
-
System V rel 4.0.3 and 4.0.4 (usg5.4)
Supported, including shared libraries for ELF, but ptys do not work
#undef HAVE_SOCKETS in config.h, after the inclusion of s-usg5-4.h.
(Any system that supports Internet should implement sockets.)
-Ultrix (bsd4.3)
-
- Recent versions of Ultrix appear to support the features of Berkeley 4.3.
- Ultrix was at the BSD 4.2 level for a long time after BSD 4.3 came out.
-
- Ultrix 3.0 has incompatibilities in its X library if you have the
- Ultrix version of X (UWS version 2.0). To solve them, you need to
- prevent XvmsAlloc.o in Xlib from being used. Israel Pinkas says:
-
- I added the following lines to config.h after the X defines:
-
- #if defined(ultrix) && defined(X11)
- #define OBJECTS_SYSTEM calloc.o
- #endif
-
- Then I ran the following:
-
- ar x /usr/lib/libc.a calloc.o
-
- The problem is said to be gone in UWS version 2.1.
-
-Uniplus 5.2 (unipl5.2)
-
- Works, on Dual machines at least.
-
-VMS (vmsM.N)
-
- Richard Levitte <levitte@e.kth.se> distributes a set of patches to
- Emacs 18.59 to make it work nicely under VMS. Emacs 19 probably
- won't work very well, or even compile. Levitte is working on a
- port, so these problems should be fixed in the near future.
-
- Note that Emacs for VMS is usually distributed in a special VMS
- distribution. See the file ../vms/VMSINSTALL for info on moving
- Unix distributions to VMS, and other VMS-related topics.
-
Windows NT/95/98/ME/2000
For installation on all versions of the MS-Windows platform, see the
(using the location of the 32-bit X libraries on your system).
-Xenix (xenix)
-
- Should work in 18.50, but you will need to edit the files
- `lib-src/Makefile' and `src/ymakefile'
- (see the comments that mention "Xenix" for what to change.)
- Compiling Emacs with -O is said not to work.
-
- If you want Emacs to work with Smail (installed as /usr/bin/smail)
- then add the line #define SMAIL to config.h.
+Support for the following obsolete platforms was removed in Emacs 23.1
+(the names in parentheses state the files in src/ that were removed):
+
+ Apollo SR10.x (unexapollo.c)
+ Convex (unexconvex.c and m/convex.c)
+ Xenix (unexenix.c and s/xenix.h)
+ Iris (unexmips.c m/iris4d.h m/irist.h s/iris3-5.h s/iris3-6.h)
+ Gould (m/gould*)
+ Siemens machines running Sinix (unexsni.c)
+ Harris CXUX (s/cxux*)
+ ESIX, a variant of v.5.3 for the 386 (s/esix*)
+ Interactive (ISC) Unix (s/isc*)
+ Sony News (s/newsos*)
+ RTU 3.0, ucb universe (s/rtu.h)
+ UniSoft's UniPlus 5.2 (s/uniplus.h)
+ UMAX (s/umax.h)
+ AT&T UNIX PC model 7300 (m/7300.h)
+ Acorn
+ Alliant (m/alliant*)
+ Amdahl (m/amdahl*)
+ Altos 3068 Unix System V Release 2 (m/altos.h)
+ Apollo (m/apollo.h)
+ AT&T 3b (m/att3b.h)
+ Aviion (m/aviion*)
+ Berkeley 4.1 (m/bsd4.1.h)
+ Berkeley 4.2 (m/bsd4.2.h)
+ Berkeley 4.3 (m/bsd4.3.h)
+ Celerity (m/celerity.h)
+ clipper (m/clipper.h)
+ convergent S series (m/cnvrgnt.h)
+ cydra (m/cydra5.h)
+ Motorola System V/88 machines (m/delta88k.h)
+ Bull DPX/2 range (m/dpx2.h)
+ Dual machines using unisoft port (m/dual.h)
+ Elxsi machine (running enix) (m/elxsi.h)
+ Fujitsu F301 machine (m/f301.h)
+ i860 (m/i860.h)
+ ibm ps/2 aix386 (m/ibmps2-aix.h)
+ ISI 68000's (m/is*)
+ Masscomp 5000 series running RTU, ucb universe (m/masscomp.h)
+ Megatest 68000's (m/mega68.h)
+ Whitechapel Computer Works MG1 (ns16000 based) (m/mg1.h)
+ Harris Night Hawk Series 1200 and Series 3000 (m/nh3000.h m/nh4000.h)
+ ns16000 (m/ns16000.h)
+ National Semiconductor 32000, running Genix (m/ns32000.h)
+ TI Nu machines using system V (m/nu.h)
+ HLH Orion (m/orion.h m/orion105.h)
+ Paragon i860 (m/paragon.h)
+ PFU A-series (m/pfa50.h)
+ Plexus running System V.2 (m/plexus.h)
+ pyramid. (m/pyramid.h)
+ Bull SPS-7 (m/sps7.h)
+ Hitachi SR2001/SR2201 (m/sr2k.h)
+ Stride (m/stride.h)
+ Sun 1 (m/sun1.h)
+ Sun 2 (m/sun2.h)
+ SEQUENT SYMMETRY (m/symmetry.h)
+ Tadpole 68k machines (m/tad68k.h)
+ tahoe (m/tahoe.h)
+ targon31 (m/targon31.h)
+ Tektronix* (m/tek4300.h m/tekxd88.h)
+ NCR Tower 32 running System V.2 (m/tower32.h)
+ NCR Tower 32 running System V.3 (m/tower32v3.h)
+ U-station (Nihon Unisys, SS5E; Sumitomo Denkoh, U-Station E30) (m/ustation.h)
+ Wicat (m/wicat.h)
+ Honeywell XPS100 running UNIX System V.2 (m/xps100.h)
+ Data General's DG/UX (s/dgux*)
+ Irix before version 6
+ osf1 (s/osf*)
+ SunOS4 (s/sunos*)
+ RISCiX (s/riscix*)
+ SCO 3.2v4 (s/sco4.h)
+ SCO 3.2v5 (s/sco5.h)
+ Sun's 386-based RoadRunner (m/sun386.h)
+ Sun3 machines (m/sun3*)
+ Integrated Solutions 386 machine (m/is386.h)
+ Integrated Solutions `Optimum V' -- m68k-isi-bsd4.2 or -bsd4.3
+ Harris Power PC (powerpc-harris-powerunix)
+ Hewlett-Packard 9000 series 200 or 300 on some platforms -- m68k-hp-bsd or
+ m68k-hp-hpux; note m68k-*-netbsd* still works
+ IBM PS/2 -- i386-ibm-aix1.1 or i386-ibm-aix1.2
+ GEC 63 -- local-gec63-usg5.2
+ Tandem Integrity S2 -- mips-tandem-sysv
+ System V rel 0 -- usg5.0
+ System V rel 2 -- usg5.2
+ System V rel 2.2 -- usg5.2.2
+ System V rel 3 -- usg5.3
+ Ultrix -- bsd4.3
+ VMS (s/vms.h)
- The file etc/XENIX suggests some useful things to do to Xenix
- to make the Emacs meta key work.
\f
Local variables:
mode: text
This file is part of GNU Emacs.
-GNU Emacs is free software; you can redistribute it and/or modify
+GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GNU Emacs; see the file COPYING. If not, write to the
-Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA.
+along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
arch-tag: 7d2e93c7-e982-40ec-9055-3cd064042473