@c This is part of the Emacs manual.
-@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2001, 2002,
-@c 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+@c Copyright (C) 1985-1987, 1993-1995, 1997, 2001-2011
@c Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Rmail, Dired, Sending Mail, Top
@node Rmail Display
@section Display of Messages
- Rmail reformats the header of each message before displaying it for
-the first time. Reformatting hides uninteresting header fields to
-reduce clutter. You can use the @kbd{t} command to show the entire
-header or to repeat the header reformatting operation.
+ This section describes how Rmail displays mail headers,
+@acronym{MIME} sections and attachments, and URLs.
@table @kbd
@item t
Toggle display of complete header (@code{rmail-toggle-header}).
@end table
-@vindex rmail-ignored-headers
-@vindex rmail-nonignored-headers
- Reformatting the header involves deleting most header fields, on the
-grounds that they are not interesting. The variable
-@code{rmail-ignored-headers} holds a regular expression that specifies
-which header fields to hide in this way---if it matches the beginning
-of a header field, that whole field is hidden. However, the variable
-@code{rmail-nonignored-headers} provides a further override: a header
-matching that regular expression is shown even if it matches
-@code{rmail-ignored-headers} too.
-
-@vindex rmail-displayed-headers
- As an alternative to the previous two variables, you can set
-@code{rmail-displayed-headers} instead. If non-@code{nil}, this should
-be a regular expression specifying which headers to display.
-
@kindex t @r{(Rmail)}
@findex rmail-toggle-header
- To see the complete, original header, use the @kbd{t} command
-(@code{rmail-toggle-header}). This discards the reformatted headers of
-the current message and displays it with the original header. Repeating
-@kbd{t} reformats the message again, which shows only the interesting
-headers according to the current values of the above variables.
-Selecting the message again also reformats it if necessary.
+ Before displaying each message for the first time, Rmail reformats
+its header, hiding uninteresting header fields to reduce clutter. The
+@kbd{t} (@code{rmail-toggle-header}) command toggles this, switching
+between showing the reformatted header fields and showing the
+complete, original header. With a positive prefix argument, the
+command shows the reformatted header; with a zero or negative prefix
+argument, it shows the full header. Selecting the message again also
+reformats it if necessary.
- When the @kbd{t} command has a prefix argument, a positive argument
-means to show the reformatted header, and a zero or negative argument
-means to show the full header.
+@vindex rmail-ignored-headers
+@vindex rmail-displayed-headers
+@vindex rmail-nonignored-headers
+ The variable @code{rmail-ignored-headers} holds a regular expression
+specifying the header fields to hide; any matching header line will be
+hidden. The variable @code{rmail-nonignored-headers} overrides this:
+any header field matching that regular expression is shown even if it
+matches @code{rmail-ignored-headers} too. The variable
+@code{rmail-displayed-headers} is an alternative to these two
+variables; if non-@code{nil}, this should be a regular expression
+specifying which headers to display (the default is @code{nil}).
@vindex rmail-highlighted-headers
Rmail highlights certain header fields that are especially
interesting---by default, the @samp{From} and @samp{Subject} fields.
-The variable @code{rmail-highlighted-headers} holds a regular expression
-that specifies the header fields to highlight; if it matches the
-beginning of a header field, that whole field is highlighted. To turn
-off this feature, set @code{rmail-highlighted-headers} to @code{nil}.
-Customize the face @code{rmail-highlight} to adjust the style of the
-highlighting.
+This highlighting uses the @code{rmail-highlight} face. The variable
+@code{rmail-highlighted-headers} holds a regular expression specifying
+the header fields to highlight; if it matches the beginning of a
+header field, that whole field is highlighted. To disable this
+feature, set @code{rmail-highlighted-headers} to @code{nil}.
+
+@cindex MIME messages (Rmail)
+@vindex rmail-enable-mime
+ If a message is in @acronym{MIME} (Multipurpose Internet Mail
+Extensions) format and contains multiple parts (@acronym{MIME}
+entities), Rmail displays each part with a @dfn{tagline}. The tagline
+summarizes the part's index, size, and content type. Depending on the
+content type, it may also contain one or more buttons; these perform
+actions such as saving the part into a file.
+
+@table @kbd
+@findex rmail-mime-toggle-hidden
+@item @key{RET}
+Hide or show the @acronym{MIME} part at point
+(@code{rmail-mime-toggle-hidden}).
+
+@findex rmail-mime-next-item
+@item @key{TAB}
+Move point to the next @acronym{MIME} tagline button.
+(@code{rmail-mime-next-item}).
- You can highlight and activate URLs in incoming messages using
-Goto Address mode:
+@findex rmail-mime-previous-item
+@item @key{BackTab}
+Move point to the previous @acronym{MIME} part
+(@code{rmail-mime-previous-item}).
+
+@findex rmail-mime
+@item v
+@kindex v @r{(Rmail)}
+Toggle between @acronym{MIME} display and raw message
+(@code{rmail-mime}).
+@end table
+
+ Each plain-text @acronym{MIME} part is initially displayed
+immediately after its tagline, as part of the Rmail buffer, while
+@acronym{MIME} parts of other types are represented only by their
+taglines, with their actual contents hidden. In either case, you can
+toggle a @acronym{MIME} part between its ``displayed'' and ``hidden''
+states by typing @key{RET} anywhere in the part---or anywhere in its
+tagline, apart from a tagline button for some other action. Type
+@key{RET} (or click with the mouse) to activate a tagline button, and
+@key{TAB} to cycle point between tagline buttons.
+
+ The @kbd{v} (@code{rmail-mime}) command toggles between the default
+@acronym{MIME} display described above, and a ``raw'' display showing
+the undecoded @acronym{MIME} data. With a prefix argument, this
+command toggles the display of only an entity at point.
+
+ To prevent Rmail from handling MIME decoded messages, change the
+variable @code{rmail-enable-mime} to @code{nil}. When this is the
+case, the @kbd{v} (@code{rmail-mime}) command instead creates a
+temporary buffer to display the current @acronym{MIME} message.
+
+ You can highlight and activate URLs in the Rmail buffer using Goto
+Address mode:
@c FIXME goto-addr.el commentary says to use goto-address instead.
@smallexample
(or @kbd{Mouse-1} quickly) or by moving to one and typing @kbd{C-c
@key{RET}}. @xref{Goto Address mode, Activating URLs, Activating URLs}.
-@cindex MIME messages (Rmail)
-@findex rmail-mime
-@kindex v @r{(Rmail)}
- The @kbd{v} (@code{rmail-mime}) command creates a temporary buffer
-displaying the current MIME message. By default, it displays plain text
-and multipart messages, and offers buttons to save attachments.
-
@node Rmail Coding
@section Rmail and Coding Systems
example, a misconfigured mailer could send a message with a
@samp{charset=iso-8859-1} header when the message is actually encoded
in @code{koi8-r}. When you see the message text garbled, or some of
-its characters displayed as empty boxes, this may have happened.
+its characters displayed as hex codes or empty boxes, this may have
+happened.
@findex rmail-redecode-body
You can correct the problem by decoding the message again using the
@smallexample
maildir://var/spool/mail/in
@end smallexample
-
-@ignore
- arch-tag: 034965f6-38df-47a2-a9f1-b8bc8ab37e23
-@end ignore