@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
-@c Copyright (C) 1998, 1999 Free Software Foundation, Inc.
+@c Copyright (C) 1998, 1999, 2002, 2003, 2004,
+@c 2005, 2006 Free Software Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@setfilename ../info/characters
@node Non-ASCII Characters, Searching and Matching, Text, Top
-@chapter Non-@sc{ascii} Characters
+@chapter Non-@acronym{ASCII} Characters
@cindex multibyte characters
-@cindex non-@sc{ascii} characters
+@cindex non-@acronym{ASCII} characters
- This chapter covers the special issues relating to non-@sc{ascii}
+ This chapter covers the special issues relating to non-@acronym{ASCII}
characters and how they are stored in strings and buffers.
@menu
* Selecting a Representation:: Treating a byte sequence as unibyte or multi.
* Character Codes:: How unibyte and multibyte relate to
codes of individual characters.
-* Character Sets:: The space of possible characters codes
+* Character Sets:: The space of possible character codes
is divided into various character sets.
* Chars and Bytes:: More information about multibyte encodings.
* Splitting Characters:: Converting a character to its byte sequence.
* Translation of Characters:: Translation tables are used for conversion.
* Coding Systems:: Coding systems are conversions for saving files.
* Input Methods:: Input methods allow users to enter various
- non-ASCII characters without speciak keyboards.
+ non-ASCII characters without special keyboards.
* Locales:: Interacting with the POSIX locale.
@end menu
@cindex unibyte text
In unibyte representation, each character occupies one byte and
therefore the possible character codes range from 0 to 255. Codes 0
-through 127 are @sc{ascii} characters; the codes from 128 through 255
-are used for one non-@sc{ascii} character set (you can choose which
+through 127 are @acronym{ASCII} characters; the codes from 128 through 255
+are used for one non-@acronym{ASCII} character set (you can choose which
character set by setting the variable @code{nonascii-insert-offset}).
@cindex leading code
0377); these values are @dfn{trailing codes}.
Some sequences of bytes are not valid in multibyte text: for example,
-a single isolated byte in the range 128 through 159 is not allowed.
-But character codes 128 through 159 can appear in multibyte text,
-represented as two-byte sequences. None of the character codes 128
-through 255 normally appear in ordinary multibyte text, but they do
+a single isolated byte in the range 128 through 159 is not allowed. But
+character codes 128 through 159 can appear in multibyte text,
+represented as two-byte sequences. All the character codes 128 through
+255 are possible (though slightly abnormal) in multibyte text; they
appear in multibyte buffers and strings when you do explicit encoding
and decoding (@pxref{Explicit Encoding}).
@defun position-bytes position
@tindex position-bytes
-Return the byte-position corresponding to buffer position @var{position}
-in the current buffer.
+Return the byte-position corresponding to buffer position
+@var{position} in the current buffer. This is 1 at the start of the
+buffer, and counts upward in bytes. If @var{position} is out of
+range, the value is @code{nil}.
@end defun
@defun byte-to-position byte-position
@tindex byte-to-position
Return the buffer position corresponding to byte-position
-@var{byte-position} in the current buffer.
+@var{byte-position} in the current buffer. If @var{byte-position} is
+out of range, the value is @code{nil}.
@end defun
@defun multibyte-string-p string
acceptable because the buffer's representation is a choice made by the
user that cannot be overridden automatically.
- Converting unibyte text to multibyte text leaves @sc{ascii} characters
-unchanged, and likewise 128 through 159. It converts the non-@sc{ascii}
-codes 160 through 255 by adding the value @code{nonascii-insert-offset}
-to each character code. By setting this variable, you specify which
-character set the unibyte characters correspond to (@pxref{Character
-Sets}). For example, if @code{nonascii-insert-offset} is 2048, which is
-@code{(- (make-char 'latin-iso8859-1) 128)}, then the unibyte
-non-@sc{ascii} characters correspond to Latin 1. If it is 2688, which
-is @code{(- (make-char 'greek-iso8859-7) 128)}, then they correspond to
-Greek letters.
+ Converting unibyte text to multibyte text leaves @acronym{ASCII} characters
+unchanged, and likewise character codes 128 through 159. It converts
+the non-@acronym{ASCII} codes 160 through 255 by adding the value
+@code{nonascii-insert-offset} to each character code. By setting this
+variable, you specify which character set the unibyte characters
+correspond to (@pxref{Character Sets}). For example, if
+@code{nonascii-insert-offset} is 2048, which is @code{(- (make-char
+'latin-iso8859-1) 128)}, then the unibyte non-@acronym{ASCII} characters
+correspond to Latin 1. If it is 2688, which is @code{(- (make-char
+'greek-iso8859-7) 128)}, then they correspond to Greek letters.
Converting multibyte text to unibyte is simpler: it discards all but
the low 8 bits of each character code. If @code{nonascii-insert-offset}
text.
@defvar nonascii-insert-offset
-This variable specifies the amount to add to a non-@sc{ascii} character
+This variable specifies the amount to add to a non-@acronym{ASCII} character
when converting unibyte text to multibyte. It also applies when
@code{self-insert-command} inserts a character in the unibyte
-non-@sc{ascii} range, 128 through 255. However, the functions
+non-@acronym{ASCII} range, 128 through 255. However, the functions
@code{insert} and @code{insert-char} do not perform this conversion.
The right value to use to select character set @var{cs} is @code{(-
If this is non-@code{nil}, it overrides @code{nonascii-insert-offset}.
@end defvar
+The next three functions either return the argument @var{string}, or a
+newly created string with no text properties.
+
@defun string-make-unibyte string
This function converts the text of @var{string} to unibyte
representation, if it isn't already, and returns the result. If
-@var{string} is a unibyte string, it is returned unchanged.
+@var{string} is a unibyte string, it is returned unchanged. Multibyte
+character codes are converted to unibyte according to
+@code{nonascii-translation-table} or, if that is @code{nil}, using
+@code{nonascii-insert-offset}. If the lookup in the translation table
+fails, this function takes just the low 8 bits of each character.
@end defun
@defun string-make-multibyte string
This function converts the text of @var{string} to multibyte
representation, if it isn't already, and returns the result. If
-@var{string} is a multibyte string, it is returned unchanged.
+@var{string} is a multibyte string or consists entirely of
+@acronym{ASCII} characters, it is returned unchanged. In particular,
+if @var{string} is unibyte and entirely @acronym{ASCII}, the returned
+string is unibyte. (When the characters are all @acronym{ASCII},
+Emacs primitives will treat the string the same way whether it is
+unibyte or multibyte.) If @var{string} is unibyte and contains
+non-@acronym{ASCII} characters, the function
+@code{unibyte-char-to-multibyte} is used to convert each unibyte
+character to a multibyte character.
+@end defun
+
+@defun string-to-multibyte string
+This function returns a multibyte string containing the same sequence
+of character codes as @var{string}. Unlike
+@code{string-make-multibyte}, this function unconditionally returns a
+multibyte string. If @var{string} is a multibyte string, it is
+returned unchanged.
+@end defun
+
+@defun multibyte-char-to-unibyte char
+This convert the multibyte character @var{char} to a unibyte
+character, based on @code{nonascii-translation-table} and
+@code{nonascii-insert-offset}.
+@end defun
+
+@defun unibyte-char-to-multibyte char
+This convert the unibyte character @var{char} to a multibyte
+character, based on @code{nonascii-translation-table} and
+@code{nonascii-insert-offset}.
@end defun
@node Selecting a Representation
more characters than @var{string} has.
If @var{string} is already a unibyte string, then the value is
-@var{string} itself.
+@var{string} itself. Otherwise it is a newly created string, with no
+text properties. If @var{string} is multibyte, any characters it
+contains of charset @code{eight-bit-control} or @code{eight-bit-graphic}
+are converted to the corresponding single byte.
@end defun
@defun string-as-multibyte string
value may have fewer characters than @var{string} has.
If @var{string} is already a multibyte string, then the value is
-@var{string} itself.
+@var{string} itself. Otherwise it is a newly created string, with no
+text properties. If @var{string} is unibyte and contains any individual
+8-bit bytes (i.e.@: not part of a multibyte form), they are converted to
+the corresponding multibyte character of charset @code{eight-bit-control}
+or @code{eight-bit-graphic}.
@end defun
@node Character Codes
0 to 255---the values that can fit in one byte. The valid character
codes for multibyte representation range from 0 to 524287, but not all
values in that range are valid. The values 128 through 255 are not
-really proper in multibyte text, but they can occur if you do explicit
+entirely proper in multibyte text, but they can occur if you do explicit
encoding and decoding (@pxref{Explicit Encoding}). Some other character
-codes cannot occur at all in multibyte text. Only the @sc{ascii} codes
-0 through 127 are truly legitimate in both representations.
+codes cannot occur at all in multibyte text. Only the @acronym{ASCII} codes
+0 through 127 are completely legitimate in both representations.
@defun char-valid-p charcode &optional genericp
-This returns @code{t} if @var{charcode} is valid for either one of the two
-text representations.
+This returns @code{t} if @var{charcode} is valid (either for unibyte
+text or for multibyte text).
@example
(char-valid-p 65)
@result{} t
@end example
-If the optional argument @var{genericp} is non-nil, this function
-returns @code{t} if @var{charcode} is a generic character
-(@pxref{Splitting Characters}).
+If the optional argument @var{genericp} is non-@code{nil}, this
+function also returns @code{t} if @var{charcode} is a generic
+character (@pxref{Splitting Characters}).
@end defun
@node Character Sets
characters, generally known as Big 5, is divided into two Emacs
character sets, @code{chinese-big5-1} and @code{chinese-big5-2}.
- @sc{ascii} characters are in character set @code{ascii}. The
-non-@sc{ascii} characters 128 through 159 are in character set
+ @acronym{ASCII} characters are in character set @code{ascii}. The
+non-@acronym{ASCII} characters 128 through 159 are in character set
@code{eight-bit-control}, and codes 160 through 255 are in character set
@code{eight-bit-graphic}.
@code{nil} otherwise.
@end defun
+@defvar charset-list
+The value is a list of all defined character set names.
+@end defvar
+
@defun charset-list
-This function returns a list of all defined character set names.
+This function returns the value of @code{charset-list}. It is only
+provided for backward compatibility.
@end defun
@defun char-charset character
This function returns the name of the character set that @var{character}
-belongs to.
+belongs to, or the symbol @code{unknown} if @var{character} is not a
+valid character.
@end defun
@defun charset-plist charset
This function returns the charset property list of the character set
@var{charset}. Although @var{charset} is a symbol, this is not the same
as the property list of that symbol. Charset properties are used for
-special purposes within Emacs; for example,
-@code{preferred-coding-system} helps determine which coding system to
-use to encode characters in a charset.
+special purposes within Emacs.
@end defun
+@deffn Command list-charset-chars charset
+This command displays a list of characters in the character set
+@var{charset}.
+@end deffn
+
@node Chars and Bytes
@section Characters and Bytes
@cindex bytes and characters
@cindex dimension (of character set)
In multibyte representation, each character occupies one or more
bytes. Each character set has an @dfn{introduction sequence}, which is
-normally one or two bytes long. (Exception: the @sc{ascii} character
-set and the @sc{eight-bit-graphic} character set have a zero-length
+normally one or two bytes long. (Exception: the @code{ascii} character
+set and the @code{eight-bit-graphic} character set have a zero-length
introduction sequence.) The introduction sequence is the beginning of
the byte sequence for any character in the character set. The rest of
the character's bytes distinguish it from the other characters in the
identify @var{character} within that character set. The number of byte
values is the character set's dimension.
+If @var{character} is invalid as a character code, @code{split-char}
+returns a list consisting of the symbol @code{unknown} and @var{character}.
+
@example
(split-char 2248)
@result{} (latin-iso8859-1 72)
@end example
@end defun
-@defun make-char charset &rest byte-values
-This function returns the character in character set @var{charset}
-identified by @var{byte-values}. This is roughly the inverse of
-@code{split-char}. Normally, you should specify either one or two
-@var{byte-values}, according to the dimension of @var{charset}. For
-example,
+@defun make-char charset &optional code1 code2
+This function returns the character in character set @var{charset} whose
+position codes are @var{code1} and @var{code2}. This is roughly the
+inverse of @code{split-char}. Normally, you should specify either one
+or both of @var{code1} and @var{code2} according to the dimension of
+@var{charset}. For example,
@example
(make-char 'latin-iso8859-1 72)
@result{} 2248
@end example
+
+Actually, the eighth bit of both @var{code1} and @var{code2} is zeroed
+before they are used to index @var{charset}. Thus you may use, for
+instance, an ISO 8859 character code rather than subtracting 128, as
+is necessary to index the corresponding Emacs charset.
@end defun
@cindex generic characters
@result{} (latin-iso8859-1 0)
@end example
-The character sets @sc{ascii}, @sc{eight-bit-control}, and
-@sc{eight-bit-graphic} don't have corresponding generic characters.
+The character sets @code{ascii}, @code{eight-bit-control}, and
+@code{eight-bit-graphic} don't have corresponding generic characters. If
+@var{charset} is one of them and you don't supply @var{code1},
+@code{make-char} returns the character code corresponding to the
+smallest code in @var{charset}.
@node Scanning Charsets
@section Scanning for Character Sets
coding systems (@pxref{Coding Systems}) are capable of representing all
of the text in question.
+@defun charset-after &optional pos
+This function return the charset of a character in the current buffer
+at position @var{pos}. If @var{pos} is omitted or @code{nil}, it
+defauls to the current value of point. If @var{pos} is out of range,
+the value is @code{nil}.
+@end defun
+
@defun find-charset-region beg end &optional translation
This function returns a list of the character sets that appear in the
current buffer between positions @var{beg} and @var{end}.
@cindex character translation tables
@cindex translation tables
- A @dfn{translation table} specifies a mapping of characters
-into characters. These tables are used in encoding and decoding, and
-for other purposes. Some coding systems specify their own particular
-translation tables; there are also default translation tables which
-apply to all other coding systems.
+ A @dfn{translation table} is a char-table that specifies a mapping
+of characters into characters. These tables are used in encoding and
+decoding, and for other purposes. Some coding systems specify their
+own particular translation tables; there are also default translation
+tables which apply to all other coding systems.
+
+ For instance, the coding-system @code{utf-8} has a translation table
+that maps characters of various charsets (e.g.,
+@code{latin-iso8859-@var{x}}) into Unicode character sets. This way,
+it can encode Latin-2 characters into UTF-8. Meanwhile,
+@code{unify-8859-on-decoding-mode} operates by specifying
+@code{standard-translation-table-for-decode} to translate
+Latin-@var{x} characters into corresponding Unicode characters.
@defun make-translation-table &rest translations
This function returns a translation table based on the argument
-@var{translations}. Each element of
-@var{translations} should be a list of the form @code{(@var{from}
-. @var{to})}; this says to translate the character @var{from} into
-@var{to}.
+@var{translations}. Each element of @var{translations} should be a
+list of elements of the form @code{(@var{from} . @var{to})}; this says
+to translate the character @var{from} into @var{to}.
+
+The arguments and the forms in each argument are processed in order,
+and if a previous form already translates @var{to} to some other
+character, say @var{to-alt}, @var{from} is also translated to
+@var{to-alt}.
You can also map one whole character set into another character set with
the same dimension. To do this, you specify a generic character (which
designates a character set) for @var{from} (@pxref{Splitting Characters}).
-In this case, @var{to} should also be a generic character, for another
-character set of the same dimension. Then the translation table
-translates each character of @var{from}'s character set into the
-corresponding character of @var{to}'s character set.
+In this case, if @var{to} is also a generic character, its character
+set should have the same dimension as @var{from}'s. Then the
+translation table translates each character of @var{from}'s character
+set into the corresponding character of @var{to}'s character set. If
+@var{from} is a generic character and @var{to} is an ordinary
+character, then the translation table translates every character of
+@var{from}'s character set into @var{to}.
@end defun
In decoding, the translation table's translations are applied to the
characters that result from ordinary decoding. If a coding system has
-property @code{character-translation-table-for-decode}, that specifies
-the translation table to use. Otherwise, if
-@code{standard-translation-table-for-decode} is non-@code{nil}, decoding
-uses that table.
+property @code{translation-table-for-decode}, that specifies the
+translation table to use. (This is a property of the coding system,
+as returned by @code{coding-system-get}, not a property of the symbol
+that is the coding system's name. @xref{Coding System Basics,, Basic
+Concepts of Coding Systems}.) Otherwise, if
+@code{standard-translation-table-for-decode} is non-@code{nil},
+decoding uses that table.
In encoding, the translation table's translations are applied to the
characters in the buffer, and the result of translation is actually
encoded. If a coding system has property
-@code{character-translation-table-for-encode}, that specifies the
-translation table to use. Otherwise the variable
+@code{translation-table-for-encode}, that specifies the translation
+table to use. Otherwise the variable
@code{standard-translation-table-for-encode} specifies the translation
table.
coding systems that don't specify any other translation table.
@end defvar
+@defvar translation-table-for-input
+Self-inserting characters are translated through this translation
+table before they are inserted. Search commands also translate their
+input through this table, so they can compare more reliably with
+what's in the buffer.
+
+@code{set-buffer-file-coding-system} sets this variable so that your
+keyboard input gets translated into the character sets that the buffer
+is likely to contain. This variable automatically becomes
+buffer-local when set.
+@end defvar
+
@node Coding Systems
@section Coding Systems
conversion, but some of them leave the choice unspecified---to be chosen
heuristically for each file, based on the data.
+ In general, a coding system doesn't guarantee roundtrip identity:
+decoding a byte sequence using coding system, then encoding the
+resulting text in the same coding system, can produce a different byte
+sequence. However, the following coding systems do guarantee that the
+byte sequence will be the same as what you originally decoded:
+
+@quotation
+chinese-big5 chinese-iso-8bit cyrillic-iso-8bit emacs-mule
+greek-iso-8bit hebrew-iso-8bit iso-latin-1 iso-latin-2 iso-latin-3
+iso-latin-4 iso-latin-5 iso-latin-8 iso-latin-9 iso-safe
+japanese-iso-8bit japanese-shift-jis korean-iso-8bit raw-text
+@end quotation
+
+ Encoding buffer text and then decoding the result can also fail to
+reproduce the original text. For instance, if you encode Latin-2
+characters with @code{utf-8} and decode the result using the same
+coding system, you'll get Unicode characters (of charset
+@code{mule-unicode-0100-24ff}). If you encode Unicode characters with
+@code{iso-latin-2} and decode the result with the same coding system,
+you'll get Latin-2 characters.
+
@cindex end of line conversion
@dfn{End of line conversion} handles three different conventions used
on various systems for representing end of line in files. The Unix
uses one to encode the buffer contents.
You can specify the coding system to use either explicitly
-(@pxref{Specifying Coding Systems}), or implicitly using the defaulting
+(@pxref{Specifying Coding Systems}), or implicitly using a default
mechanism (@pxref{Default Coding Systems}). But these methods may not
completely specify what to do. For example, they may choose a coding
system such as @code{undefined} which leaves the character code
you will want to find out afterwards which coding system was chosen.
@defvar buffer-file-coding-system
-This variable records the coding system that was used for visiting the
-current buffer. It is used for saving the buffer, and for writing part
-of the buffer with @code{write-region}. When those operations ask the
-user to specify a different coding system,
-@code{buffer-file-coding-system} is updated to the coding system
-specified.
-
-However, @code{buffer-file-coding-system} does not affect sending text
+This buffer-local variable records the coding system that was used to visit
+the current buffer. It is used for saving the buffer, and for writing part
+of the buffer with @code{write-region}. If the text to be written
+cannot be safely encoded using the coding system specified by this
+variable, these operations select an alternative encoding by calling
+the function @code{select-safe-coding-system} (@pxref{User-Chosen
+Coding Systems}). If selecting a different encoding requires to ask
+the user to specify a coding system, @code{buffer-file-coding-system}
+is updated to the newly selected coding system.
+
+@code{buffer-file-coding-system} does @emph{not} affect sending text
to a subprocess.
@end defvar
@code{buffer-file-coding-system} (or @code{save-buffer-coding-system}),
and that coding system cannot handle
the actual text in the buffer, the command asks the user to choose
-another coding system. After that happens, the command also updates
-@code{buffer-file-coding-system} to represent the coding system that the
-user specified.
+another coding system (by calling @code{select-safe-coding-system}).
+After that happens, the command also updates
+@code{buffer-file-coding-system} to represent the coding system that
+the user specified.
@end defvar
@defvar last-coding-system-used
The variable @code{selection-coding-system} specifies how to encode
selections for the window system. @xref{Window System Selections}.
+@defvar file-name-coding-system
+The variable @code{file-name-coding-system} specifies the coding
+system to use for encoding file names. Emacs encodes file names using
+that coding system for all file operations. If
+@code{file-name-coding-system} is @code{nil}, Emacs uses a default
+coding system determined by the selected language environment. In the
+default language environment, any non-@acronym{ASCII} characters in
+file names are not encoded specially; they appear in the file system
+using the internal Emacs representation.
+@end defvar
+
+ @strong{Warning:} if you change @code{file-name-coding-system} (or
+the language environment) in the middle of an Emacs session, problems
+can result if you have already visited files whose names were encoded
+using the earlier coding system and are handled differently under the
+new coding system. If you try to save one of these buffers under the
+visited file name, saving may use the wrong file name, or it may get
+an error. If such a problem happens, use @kbd{C-x C-w} to specify a
+new file name for that buffer.
+
@node Lisp and Coding Systems
@subsection Coding Systems in Lisp
@defun coding-system-p object
This function returns @code{t} if @var{object} is a coding system
-name.
+name or @code{nil}.
@end defun
@defun check-coding-system coding-system
@var{eol-type} should be @code{unix}, @code{dos}, @code{mac}, or
@code{nil}. If it is @code{nil}, the returned coding system determines
the end-of-line conversion from the data.
+
+@var{eol-type} may also be 0, 1 or 2, standing for @code{unix},
+@code{dos} and @code{mac}, respectively.
@end defun
@defun coding-system-change-text-conversion eol-coding text-coding
return value is just one coding system, the one that is highest in
priority.
-If the region contains only @sc{ascii} characters, the value
-is @code{undecided} or @code{(undecided)}.
+If the region contains only @acronym{ASCII} characters, the value
+is @code{undecided} or @code{(undecided)}, or a variant specifying
+end-of-line conversion, if that can be deduced from the text.
@end defun
-@defun detect-coding-string string highest
+@defun detect-coding-string string &optional highest
This function is like @code{detect-coding-region} except that it
operates on the contents of @var{string} instead of bytes in the buffer.
@end defun
- @xref{Process Information}, for how to examine or set the coding
-systems used for I/O to a subprocess.
+ @xref{Coding systems for a subprocess,, Process Information}, in
+particular the description of the functions
+@code{process-coding-system} and @code{set-process-coding-system}, for
+how to examine or set the coding systems used for I/O to a subprocess.
@node User-Chosen Coding Systems
@subsection User-Chosen Coding Systems
-@defun select-safe-coding-system from to &optional preferred-coding-system
-This function selects a coding system for encoding the text between
-@var{from} and @var{to}, asking the user to choose if necessary.
-
-The optional argument @var{preferred-coding-system} specifies a coding
-system to try first. If that one can handle the text in the specified
-region, then it is used. If this argument is omitted, the current
-buffer's value of @code{buffer-file-coding-system} is tried first.
-
-If the region contains some multibyte characters that the preferred
-coding system cannot encode, this function asks the user to choose from
-a list of coding systems which can encode the text, and returns the
-user's choice.
-
-One other kludgy feature: if @var{from} is a string, the string is the
-target text, and @var{to} is ignored.
+@cindex select safe coding system
+@defun select-safe-coding-system from to &optional default-coding-system accept-default-p file
+This function selects a coding system for encoding specified text,
+asking the user to choose if necessary. Normally the specified text
+is the text in the current buffer between @var{from} and @var{to}. If
+@var{from} is a string, the string specifies the text to encode, and
+@var{to} is ignored.
+
+If @var{default-coding-system} is non-@code{nil}, that is the first
+coding system to try; if that can handle the text,
+@code{select-safe-coding-system} returns that coding system. It can
+also be a list of coding systems; then the function tries each of them
+one by one. After trying all of them, it next tries the current
+buffer's value of @code{buffer-file-coding-system} (if it is not
+@code{undecided}), then the value of
+@code{default-buffer-file-coding-system} and finally the user's most
+preferred coding system, which the user can set using the command
+@code{prefer-coding-system} (@pxref{Recognize Coding,, Recognizing
+Coding Systems, emacs, The GNU Emacs Manual}).
+
+If one of those coding systems can safely encode all the specified
+text, @code{select-safe-coding-system} chooses it and returns it.
+Otherwise, it asks the user to choose from a list of coding systems
+which can encode all the text, and returns the user's choice.
+
+@var{default-coding-system} can also be a list whose first element is
+t and whose other elements are coding systems. Then, if no coding
+system in the list can handle the text, @code{select-safe-coding-system}
+queries the user immediately, without trying any of the three
+alternatives described above.
+
+The optional argument @var{accept-default-p}, if non-@code{nil},
+should be a function to determine whether a coding system selected
+without user interaction is acceptable. @code{select-safe-coding-system}
+calls this function with one argument, the base coding system of the
+selected coding system. If @var{accept-default-p} returns @code{nil},
+@code{select-safe-coding-system} rejects the silently selected coding
+system, and asks the user to select a coding system from a list of
+possible candidates.
+
+@vindex select-safe-coding-system-accept-default-p
+If the variable @code{select-safe-coding-system-accept-default-p} is
+non-@code{nil}, its value overrides the value of
+@var{accept-default-p}.
+
+As a final step, before returning the chosen coding system,
+@code{select-safe-coding-system} checks whether that coding system is
+consistent with what would be selected if the contents of the region
+were read from a file. (If not, this could lead to data corruption in
+a file subsequently re-visited and edited.) Normally,
+@code{select-safe-coding-system} uses @code{buffer-file-name} as the
+file for this purpose, but if @var{file} is non-@code{nil}, it uses
+that file instead (this can be relevant for @code{write-region} and
+similar functions). If it detects an apparent inconsistency,
+@code{select-safe-coding-system} queries the user before selecting the
+coding system.
@end defun
Here are two functions you can use to let the user specify a coding
@code{coding-system-for-read} and @code{coding-system-for-write}
(@pxref{Specifying Coding Systems}).
+@defvar auto-coding-regexp-alist
+This variable is an alist of text patterns and corresponding coding
+systems. Each element has the form @code{(@var{regexp}
+. @var{coding-system})}; a file whose first few kilobytes match
+@var{regexp} is decoded with @var{coding-system} when its contents are
+read into a buffer. The settings in this alist take priority over
+@code{coding:} tags in the files and the contents of
+@code{file-coding-system-alist} (see below). The default value is set
+so that Emacs automatically recognizes mail files in Babyl format and
+reads them with no code conversions.
+@end defvar
+
@defvar file-coding-system-alist
This variable is an alist that specifies the coding systems to use for
reading and writing particular files. Each element has the form
specifies the coding system for decoding, and its @sc{cdr} specifies the
coding system for encoding.
-If @var{coding} is a function name, the function must return a coding
-system or a cons cell containing two coding systems. This value is used
-as described above.
+If @var{coding} is a function name, the function should take one
+argument, a list of all arguments passed to
+@code{find-operation-coding-system}. It must return a coding system
+or a cons cell containing two coding systems. This value has the same
+meaning as described above.
@end defvar
@defvar process-coding-system-alist
the subprocess, and @var{output-coding} applies to output to it.
@end defvar
+@defvar auto-coding-functions
+This variable holds a list of functions that try to determine a
+coding system for a file based on its undecoded contents.
+
+Each function in this list should be written to look at text in the
+current buffer, but should not modify it in any way. The buffer will
+contain undecoded text of parts of the file. Each function should
+take one argument, @var{size}, which tells it how many characters to
+look at, starting from point. If the function succeeds in determining
+a coding system for the file, it should return that coding system.
+Otherwise, it should return @code{nil}.
+
+If a file has a @samp{coding:} tag, that takes precedence, so these
+functions won't be called.
+@end defvar
+
@defun find-operation-coding-system operation &rest arguments
This function returns the coding system to use (by default) for
performing @var{operation} with @var{arguments}. The value has this
form:
@example
-(@var{decoding-system} @var{encoding-system})
+(@var{decoding-system} . @var{encoding-system})
@end example
The first element, @var{decoding-system}, is the coding system to use
@var{encoding-system} is the coding system for encoding (in case
@var{operation} does encoding).
-The argument @var{operation} should be a symbol, one of
-@code{insert-file-contents}, @code{write-region}, @code{call-process},
-@code{call-process-region}, @code{start-process}, or
-@code{open-network-stream}. These are the names of the Emacs I/O primitives
-that can do coding system conversion.
+The argument @var{operation} should be a symbol, any one of
+@code{insert-file-contents}, @code{write-region},
+@code{start-process}, @code{call-process}, @code{call-process-region},
+or @code{open-network-stream}. These are the names of the Emacs I/O
+primitives that can do coding system conversion.
The remaining arguments should be the same arguments that might be given
to that I/O primitive. Depending on the primitive, one of those
target. For @code{open-network-stream}, the target is the service name
or port number.
-This function looks up the target in @code{file-coding-system-alist},
-@code{process-coding-system-alist}, or
-@code{network-coding-system-alist}, depending on @var{operation}.
-@xref{Default Coding Systems}.
+Depending on @var{operation}, this function looks up the target in
+@code{file-coding-system-alist}, @code{process-coding-system-alist},
+or @code{network-coding-system-alist}.
@end defun
@node Specifying Coding Systems
@example
;; @r{Read the file with no character code conversion.}
-;; @r{Assume @sc{crlf} represents end-of-line.}
-(let ((coding-system-for-write 'emacs-mule-dos))
+;; @r{Assume @acronym{crlf} represents end-of-line.}
+(let ((coding-system-for-read 'emacs-mule-dos))
(insert-file-contents filename))
@end example
are meant to operate on sequences of bytes. All of these functions
discard text properties.
-@defun encode-coding-region start end coding-system
-This function encodes the text from @var{start} to @var{end} according
+@deffn Command encode-coding-region start end coding-system
+This command encodes the text from @var{start} to @var{end} according
to coding system @var{coding-system}. The encoded text replaces the
original text in the buffer. The result of encoding is logically a
sequence of bytes, but the buffer remains multibyte if it was multibyte
before.
-@end defun
-@defun encode-coding-string string coding-system
+This command returns the length of the encoded text.
+@end deffn
+
+@defun encode-coding-string string coding-system &optional nocopy
This function encodes the text in @var{string} according to coding
system @var{coding-system}. It returns a new string containing the
-encoded text. The result of encoding is a unibyte string.
+encoded text, except when @var{nocopy} is non-@code{nil}, in which
+case the function may return @var{string} itself if the encoding
+operation is trivial. The result of encoding is a unibyte string.
@end defun
-@defun decode-coding-region start end coding-system
-This function decodes the text from @var{start} to @var{end} according
+@deffn Command decode-coding-region start end coding-system
+This command decodes the text from @var{start} to @var{end} according
to coding system @var{coding-system}. The decoded text replaces the
original text in the buffer. To make explicit decoding useful, the text
before decoding ought to be a sequence of byte values, but both
multibyte and unibyte buffers are acceptable.
-@end defun
-@defun decode-coding-string string coding-system
+This command returns the length of the decoded text.
+@end deffn
+
+@defun decode-coding-string string coding-system &optional nocopy
This function decodes the text in @var{string} according to coding
system @var{coding-system}. It returns a new string containing the
-decoded text. To make explicit decoding useful, the contents of
-@var{string} ought to be a sequence of byte values, but a multibyte
+decoded text, except when @var{nocopy} is non-@code{nil}, in which
+case the function may return @var{string} itself if the decoding
+operation is trivial. To make explicit decoding useful, the contents
+of @var{string} ought to be a sequence of byte values, but a multibyte
string is acceptable.
@end defun
+@defun decode-coding-inserted-region from to filename &optional visit beg end replace
+This function decodes the text from @var{from} to @var{to} as if
+it were being read from file @var{filename} using @code{insert-file-contents}
+using the rest of the arguments provided.
+
+The normal way to use this function is after reading text from a file
+without decoding, if you decide you would rather have decoded it.
+Instead of deleting the text and reading it again, this time with
+decoding, you can call this function.
+@end defun
+
@node Terminal I/O Encoding
@subsection Terminal I/O Encoding
keyboard input---or @code{nil} if no coding system is to be used.
@end defun
-@defun set-keyboard-coding-system coding-system
-This function specifies @var{coding-system} as the coding system to
+@deffn Command set-keyboard-coding-system coding-system
+This command specifies @var{coding-system} as the coding system to
use for decoding keyboard input. If @var{coding-system} is @code{nil},
that means do not decode keyboard input.
-@end defun
+@end deffn
@defun terminal-coding-system
This function returns the coding system that is in use for encoding
terminal output---or @code{nil} for no encoding.
@end defun
-@defun set-terminal-coding-system coding-system
-This function specifies @var{coding-system} as the coding system to use
+@deffn Command set-terminal-coding-system coding-system
+This command specifies @var{coding-system} as the coding system to use
for encoding terminal output. If @var{coding-system} is @code{nil},
that means do not encode terminal output.
-@end defun
+@end deffn
@node MS-DOS File Types
@subsection MS-DOS File Types
@section Input Methods
@cindex input methods
- @dfn{Input methods} provide convenient ways of entering non-@sc{ascii}
+ @dfn{Input methods} provide convenient ways of entering non-@acronym{ASCII}
characters from the keyboard. Unlike coding systems, which translate
-non-@sc{ascii} characters to and from encodings meant to be read by
+non-@acronym{ASCII} characters to and from encodings meant to be read by
programs, input methods provide human-friendly commands. (@xref{Input
Methods,,, emacs, The GNU Emacs Manual}, for information on how users
use input methods to enter text.) How to define input methods is not
buffer now.
@end defvar
-@defvar default-input-method
+@defopt default-input-method
This variable holds the default input method for commands that choose an
input method. Unlike @code{current-input-method}, this variable is
normally global.
-@end defvar
+@end defopt
-@defun set-input-method input-method
-This function activates input method @var{input-method} for the current
+@deffn Command set-input-method input-method
+This command activates input method @var{input-method} for the current
buffer. It also sets @code{default-input-method} to @var{input-method}.
-If @var{input-method} is @code{nil}, this function deactivates any input
+If @var{input-method} is @code{nil}, this command deactivates any input
method for the current buffer.
-@end defun
+@end deffn
@defun read-input-method-name prompt &optional default inhibit-null
This function reads an input method name with the minibuffer, prompting
@end defvar
The fundamental interface to input methods is through the
-variable @code{input-method-function}. @xref{Reading One Event}.
+variable @code{input-method-function}. @xref{Reading One Event},
+and @ref{Invoking the Input Method}.
@node Locales
@section Locales
@defvar locale-coding-system
@tindex locale-coding-system
+@cindex keyboard input decoding on X
This variable specifies the coding system to use for decoding system
-error messages, for encoding the format argument to
-@code{format-time-string}, and for decoding the return value of
-@code{format-time-string}.
+error messages and---on X Window system only---keyboard input, for
+encoding the format argument to @code{format-time-string}, and for
+decoding the return value of @code{format-time-string}.
@end defvar
@defvar system-messages-locale
locale is specified by environment variables in the usual POSIX fashion.
@end defvar
+@defun locale-info item
+This function returns locale data @var{item} for the current POSIX
+locale, if available. @var{item} should be one of these symbols:
+
+@table @code
+@item codeset
+Return the character set as a string (locale item @code{CODESET}).
+
+@item days
+Return a 7-element vector of day names (locale items
+@code{DAY_1} through @code{DAY_7});
+
+@item months
+Return a 12-element vector of month names (locale items @code{MON_1}
+through @code{MON_12}).
+
+@item paper
+Return a list @code{(@var{width} @var{height})} for the default paper
+size measured in millimeters (locale items @code{PAPER_WIDTH} and
+@code{PAPER_HEIGHT}).
+@end table
+
+If the system can't provide the requested information, or if
+@var{item} is not one of those symbols, the value is @code{nil}. All
+strings in the return value are decoded using
+@code{locale-coding-system}. @xref{Locales,,, libc, The GNU Libc Manual},
+for more information about locales and locale items.
+@end defun
+
+@ignore
+ arch-tag: be705bf8-941b-4c35-84fc-ad7d20ddb7cb
+@end ignore