@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
-@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2004
+@c Free Software Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@setfilename ../info/os
-@node System Interface, Antinews, Calendar, Top
+@node System Interface, Antinews, Display, Top
@chapter Operating System Interface
This chapter is about starting and getting out of Emacs, access to
* Time of Day:: Getting the current time.
* Time Conversion:: Converting a time from numeric form to a string, or
to calendrical data (or vice versa).
+* Processor Run Time:: Getting the run time used by Emacs.
+* Time Calculations:: Adding, subtracting, comparing times, etc.
* Timers:: Setting a timer to call a function at a certain time.
* Terminal Input:: Recording terminal input for debugging.
* Terminal Output:: Recording terminal output for debugging.
* Sound Output:: Playing sounds on the computer's speaker.
-* Special Keysyms:: Defining system-specific key symbols for X windows.
-* Flow Control:: How to turn output flow control on or off.
+* X11 Keysyms:: Operating on key symbols for X Windows
* Batch Mode:: Running Emacs without terminal interaction.
+* Session Management:: Saving and restoring state with X Session Management.
@end menu
@node Starting Up
It runs the normal hook @code{before-init-hook}.
@item
-It loads the library @file{site-start}, unless the option
-@samp{-no-site-file} was specified. The library's file name is usually
-@file{site-start.el}.
+It loads the library @file{site-start} (if any), unless the option
+@samp{-Q} (or @samp{--no-site-file}) was specified. The library's file
+name is usually @file{site-start.el}.
@cindex @file{site-start.el}
-@item
-It loads your init file (usually @file{~/.emacs}), unless @samp{-q},
-@samp{-no-init-file}, or @samp{-batch} was specified on the command line.
-The @samp{-u} option can specify another user whose home directory
-should be used instead of @file{~}.
-
-@item
-It loads the library @file{default}, unless @code{inhibit-default-init}
-is non-@code{nil}. (This is not done in @samp{-batch} mode or if
-@samp{-q} was specified on the command line.) The library's file name
-is usually @file{default.el}.
+@item
+It loads your init file (usually @file{~/.emacs}), unless @samp{-q}
+(or @samp{--no-init-file}), @samp{-Q}, or @samp{--batch} was specified
+on the command line. The @samp{-u} option can specify another user
+whose home directory should be used instead of @file{~}.
+
+@item
+It loads the library @file{default} (if any), unless
+@code{inhibit-default-init} is non-@code{nil}. (This is not done in
+@samp{-batch} mode, or if @samp{-Q} or @samp{-q} was specified on the
+command line.) The library's file name is usually @file{default.el}.
@cindex @file{default.el}
@item
the buffer @samp{*scratch*} is still current and still in Fundamental
mode.
-@item
+@item
It loads the terminal-specific Lisp file, if any, except when in batch
mode or using a window system.
@item
It displays the initial echo area message, unless you have suppressed
-that with @code{inhibit-startup-echo-area-message}.
+that with @code{inhibit-startup-echo-area-message} or @samp{-Q}.
-@item
+@item
It processes the action arguments from the command line.
-@item
+@item
It runs @code{emacs-startup-hook} and then @code{term-setup-hook}.
@item
parameters of the selected frame according to whatever the init files
specify.
-@item
+@item
It runs @code{window-setup-hook}. @xref{Window Systems}.
-@item
+@item
It displays copyleft, nonwarranty, and basic use information, provided
-there were no remaining command-line arguments (a few steps above),
-the value of @code{inhibit-startup-message} is @code{nil}, and the
-buffer is still empty.
+the value of @code{inhibit-startup-message} is @code{nil}, you didn't
+specify @samp{--no-splash} or @samp{-Q}, and the buffer is still empty.
@end enumerate
@defopt inhibit-startup-message
@cindex @file{.emacs}
When you start Emacs, it normally attempts to load your @dfn{init
-file}, a file in your home directory. Its normal name is @file{.emacs},
-but you can alternatively call it @file{.emacs.el}, which enables you to
-byte-compile it (@pxref{Byte Compilation}); then the actual file loaded
-will be @file{.emacs.elc}.
-
- The command-line switches @samp{-q} and @samp{-u} control whether and
-where to find the init file; @samp{-q} says not to load an init file,
-and @samp{-u @var{user}} says to load @var{user}'s init file instead of
-yours. @xref{Entering Emacs,,, emacs, The GNU Emacs Manual}. If
-neither option is specified, Emacs uses the @code{LOGNAME} environment
+file}, a file in your home directory. Its normal name is
+@file{.emacs}, but you can alternatively call it @file{.emacs.el}.
+You can also store it inside a subdirectory @file{.emacs.d}.
+Whichever place you use, you can also compile the file (@pxref{Byte
+Compilation}); then the actual file loaded will be @file{.emacs.elc}.
+
+ The command-line switches @samp{-q}, @samp{-Q}, and @samp{-u}
+control whether and where to find the init file; @samp{-q} (and the
+stronger @samp{-Q}) says not to load an init file, while @samp{-u
+@var{user}} says to load @var{user}'s init file instead of yours.
+@xref{Entering Emacs,,, emacs, The GNU Emacs Manual}. If neither
+option is specified, Emacs uses the @code{LOGNAME} environment
variable, or the @code{USER} (most systems) or @code{USERNAME} (MS
-systems) variable, to find your home directory and thus your init file;
-this way, even if you have su'd, Emacs still loads your own init file.
-If those environment variables are absent, though, Emacs uses your
-user-id to find your home directory.
+systems) variable, to find your home directory and thus your init
+file; this way, even if you have su'd, Emacs still loads your own init
+file. If those environment variables are absent, though, Emacs uses
+your user-id to find your home directory.
@cindex default init file
- A site may have a @dfn{default init file}, which is the library named
-@file{default.el}. Emacs finds the @file{default.el} file through the
-standard search path for libraries (@pxref{How Programs Do Loading}).
-The Emacs distribution does not come with this file; sites may provide
-one for local customizations. If the default init file exists, it is
-loaded whenever you start Emacs, except in batch mode or if @samp{-q} is
-specified. But your own personal init file, if any, is loaded first; if
-it sets @code{inhibit-default-init} to a non-@code{nil} value, then
-Emacs does not subsequently load the @file{default.el} file.
+ A site may have a @dfn{default init file}, which is the library
+named @file{default.el}. Emacs finds the @file{default.el} file
+through the standard search path for libraries (@pxref{How Programs Do
+Loading}). The Emacs distribution does not come with this file; sites
+may provide one for local customizations. If the default init file
+exists, it is loaded whenever you start Emacs, except in batch mode or
+if @samp{-q} (or @samp{-Q}) is specified. But your own personal init
+file, if any, is loaded first; if it sets @code{inhibit-default-init}
+to a non-@code{nil} value, then Emacs does not subsequently load the
+@file{default.el} file.
Another file for site-customization is @file{site-start.el}. Emacs
loads this @emph{before} the user's init file. You can inhibit the
-loading of this file with the option @samp{-no-site-file}.
+loading of this file with the option @samp{--no-site-file}.
@defvar site-run-file
This variable specifies the site-customization file to load before the
Emacs.
@end defvar
- @xref{Init File Examples,,, emacs, The GNU Emacs Manual}, for
+ @xref{Init Examples,, Init File Examples, emacs, The GNU Emacs Manual}, for
examples of how to make various commonly desired customizations in your
@file{.emacs} file.
This normal hook is run, once, just after loading all the init files
(the user's init file, @file{default.el}, and/or @file{site-start.el}),
before loading the terminal-specific library and processing the
-command-line arguments.
+command-line action arguments.
@end defvar
@defvar emacs-startup-hook
@defvar user-init-file
@tindex user-init-file
-This variable holds the file name of the user's init file. If the
+This variable holds the absolute file name of the user's init file. If the
actual init file loaded is a compiled file, such as @file{.emacs.elc},
the value refers to the corresponding source file.
@end defvar
uses @samp{internal} as the terminal type.
@end defvar
-@defvar term-setup-hook
+@defvar term-setup-hook
This variable is a normal hook that Emacs runs after loading your
init file, the default initialization file (if any) and the
terminal-specific Lisp file.
-@var{option}
@end example
-The elements of the @code{command-switch-alist} look like this:
+The elements of the @code{command-switch-alist} look like this:
@example
(@var{option} . @var{handler-function})
The command-line arguments are parsed by the @code{command-line-1}
function in the @file{startup.el} file. See also @ref{Command
-Switches, , Command Line Switches and Arguments, emacs, The GNU Emacs
-Manual}.
+Arguments, , Command Line Arguments, emacs, The GNU Emacs Manual}.
@end defvar
@defvar command-line-args
Emacs inadvertently can lose a lot of work, Emacs queries for
confirmation before actually terminating if you have buffers that need
saving or subprocesses that are running. This is done in the function
-@code{save-buffers-kill-emacs}.
+@code{save-buffers-kill-emacs}, the higher level function from which
+@code{kill-emacs} is usually called.
@defvar kill-emacs-query-functions
After asking the standard questions, @code{save-buffers-kill-emacs}
calls the functions in the list @code{kill-emacs-query-functions}, in
order of appearance, with no arguments. These functions can ask for
additional confirmation from the user. If any of them returns
-@code{nil}, Emacs is not killed.
+@code{nil}, @code{save-buffers-kill-emacs} does not kill Emacs, and
+does not run the remaining functions in this hook. Calling
+@code{kill-emacs} directly does not run this hook.
@end defvar
@defvar kill-emacs-hook
This variable is a normal hook; once @code{save-buffers-kill-emacs} is
-finished with all file saving and confirmation, it runs the functions in
-this hook.
+finished with all file saving and confirmation, it calls
+@code{kill-emacs} which runs the functions in this hook.
+@code{kill-emacs} does not run this hook in batch mode.
+
+@code{kill-emacs} may be invoked directly (that is not via
+@code{save-buffers-kill-emacs}) if the terminal is disconnected, or in
+similar situations where interaction with the user is not possible.
+Thus, if your hook needs to interact with the user, put it on
+@code{kill-emacs-query-functions}; if it needs to run regardless of
+how Emacs is killed, put it on @code{kill-emacs-hook}.
@end defvar
@node Suspending Emacs
may not have a parent that can resume it again, and in any case you can
give input to some other job such as a shell merely by moving to a
different window. Therefore, suspending is not allowed when Emacs is using
-a window system (X Windows or MS Windows).
+a window system (X or MS Windows).
-@defun suspend-emacs string
+@defun suspend-emacs &optional string
This function stops Emacs and returns control to the superior process.
If and when the superior process resumes Emacs, @code{suspend-emacs}
returns @code{nil} to its caller in Lisp.
(function (lambda ()
(or (y-or-n-p
"Really suspend? ")
- (error "Suspend cancelled")))))
+ (error "Suspend canceled")))))
@result{} (lambda nil
(or (y-or-n-p "Really suspend? ")
- (error "Suspend cancelled")))
+ (error "Suspend canceled")))
@end group
@group
(add-hook 'suspend-resume-hook
Emacs provides access to variables in the operating system environment
through various functions. These variables include the name of the
-system, the user's @sc{uid}, and so on.
+system, the user's @acronym{UID}, and so on.
@defvar system-configuration
This variable holds the GNU configuration name for the hardware/software
@item berkeley-unix
Berkeley BSD.
+@item cygwin
+Cygwin.
+
@item dgux
Data General DGUX operating system.
@deffn Command getenv var
@cindex environment variable access
This function returns the value of the environment variable @var{var},
-as a string. Within Emacs, the environment variable values are kept in
-the Lisp variable @code{process-environment}.
+as a string. @var{var} should be a string. If @var{var} is undefined
+in the environment, @code{getenv} returns @code{nil}. If returns
+@samp{""} if @var{var} is set but null. Within Emacs, the environment
+variable values are kept in the Lisp variable @code{process-environment}.
@example
@group
@end deffn
@c Emacs 19 feature
-@deffn Command setenv variable value
+@deffn Command setenv variable &optional value
This command sets the value of the environment variable named
-@var{variable} to @var{value}. Both arguments should be strings. This
-function works by modifying @code{process-environment}; binding that
-variable with @code{let} is also reasonable practice.
+@var{variable} to @var{value}. @var{variable} should be a string.
+Internally, Emacs Lisp can handle any string. However, normally
+@var{variable} should be a valid shell identifier, that is, a sequence
+of letters, digits and underscores, starting with a letter or
+underscore. Otherwise, errors may occur if subprocesses of Emacs try
+to access the value of @var{variable}. If @var{value} is omitted or
+@code{nil}, @code{setenv} removes @var{variable} from the environment.
+Otherwise, @var{value} should be a string.
+
+@code{setenv} works by modifying @code{process-environment}; binding
+that variable with @code{let} is also reasonable practice.
+
+@code{setenv} returns the new value of @var{variable}, or @code{nil}
+if it removed @var{variable} from the environment.
@end deffn
@defvar process-environment
process-environment
@result{} ("l=/usr/stanford/lib/gnuemacs/lisp"
"PATH=.:/user/lewis/bin:/usr/class:/nfsusr/local/bin"
- "USER=lewis"
+ "USER=lewis"
@end group
@group
- "TERM=ibmapa16"
+ "TERM=ibmapa16"
"SHELL=/bin/csh"
"HOME=/user/lewis")
@end group
@end smallexample
+
+If @code{process-environment} contains ``duplicate'' elements that
+specify the same environment variable, the first of these elements
+specifies the variable, and the other ``duplicates'' are ignored.
@end defvar
@defvar path-separator
If @var{use-float} is non-@code{nil}, then they are returned
as floating point numbers and without multiplying by 100.
+If it is impossible to obtain the load average, this function signals
+an error. On some platforms, access to load averages requires
+installing Emacs as setuid or setgid so that it can read kernel
+information, and that usually isn't advisable.
+
+If the 1-minute load average is available, but the 5- or 15-minute
+averages are not, this function returns a shortened list containing
+the available averages.
+
@example
@group
(load-average)
@end defun
@defun emacs-pid
-This function returns the process @sc{id} of the Emacs process.
+This function returns the process @acronym{ID} of the Emacs process,
+as an integer.
@end defun
@defvar tty-erase-char
This variable holds the erase character that was selected
in the system's terminal driver, before Emacs was started.
+The value is @code{nil} if Emacs is running under a window system.
@end defvar
@defun setprv privilege-name &optional setp getprv
@code{nil}. The function returns @code{t} if successful, @code{nil}
otherwise.
- If the third argument, @var{getprv}, is non-@code{nil}, @code{setprv}
+If the third argument, @var{getprv}, is non-@code{nil}, @code{setprv}
does not change the privilege, but returns @code{t} or @code{nil}
indicating whether the privilege is currently enabled.
@end defun
@section User Identification
@defvar init-file-user
-This variable says which user's init files should be used by Emacs---or
-@code{nil} if none. The value reflects command-line options such as
+This variable says which user's init files should be used by
+Emacs---or @code{nil} if none. @code{""} stands for the user who
+originally logged in. The value reflects command-line options such as
@samp{-q} or @samp{-u @var{user}}.
Lisp packages that load files of customizations, or any other sort of
which the user is logged in. If the environment variable @code{LOGNAME}
is set, that value is used. Otherwise, if the environment variable
@code{USER} is set, that value is used. Otherwise, the value is based
-on the effective @sc{uid}, not the real @sc{uid}.
+on the effective @acronym{UID}, not the real @acronym{UID}.
If you specify @var{uid}, the value is the user name that corresponds
-to @var{uid} (which should be an integer).
+to @var{uid} (which should be an integer), or @code{nil} if there is
+no such user.
@example
@group
@defun user-real-login-name
This function returns the user name corresponding to Emacs's real
-@sc{uid}. This ignores the effective @sc{uid} and ignores the
+@acronym{UID}. This ignores the effective @acronym{UID} and ignores the
environment variables @code{LOGNAME} and @code{USER}.
@end defun
If the Emacs job's user-id does not correspond to any known user (and
provided @code{NAME} is not set), the value is @code{"unknown"}.
-If @var{uid} is non-@code{nil}, then it should be an integer (a user-id)
+If @var{uid} is non-@code{nil}, then it should be a number (a user-id)
or a string (a login name). Then @code{user-full-name} returns the full
name corresponding to that user-id or login name. If you specify a
user-id or login name that isn't defined, it returns @code{nil}.
Titles}).
@defun user-real-uid
-This function returns the real @sc{uid} of the user.
+This function returns the real @acronym{UID} of the user.
+The value may be a floating point number.
@example
@group
@end defun
@defun user-uid
-This function returns the effective @sc{uid} of the user.
+This function returns the effective @acronym{UID} of the user.
+The value may be a floating point number.
@end defun
@node Time of Day
instead of the current time. The argument should be a list whose first
two elements are integers. Thus, you can use times obtained from
@code{current-time} (see below) and from @code{file-attributes}
-(@pxref{File Attributes}).
+(@pxref{Definition of file-attributes}). @var{time-value} can also be
+a cons of two integers, but this is considered obsolete.
@example
@group
This function returns the system's time value as a list of three
integers: @code{(@var{high} @var{low} @var{microsec})}. The integers
@var{high} and @var{low} combine to give the number of seconds since
-0:00 January 1, 1970 (local time), which is
+0:00 January 1, 1970 UTC (Coordinated Universal Time), which is
@ifnottex
@var{high} * 2**16 + @var{low}.
@end ifnottex
the resolution of only one second).
The first two elements can be compared with file time values such as you
-get with the function @code{file-attributes}. @xref{File Attributes}.
+get with the function @code{file-attributes}.
+@xref{Definition of file-attributes}.
@end defun
@c Emacs 19 feature
adjustment, then the value is constant through time.
If the operating system doesn't supply all the information necessary to
-compute the value, both elements of the list are @code{nil}.
+compute the value, the unknown elements of the list are @code{nil}.
The argument @var{time-value}, if given, specifies a time to analyze
-instead of the current time. The argument should be a cons cell
-containing two integers, or a list whose first two elements are
-integers. Thus, you can use times obtained from @code{current-time}
-(see above) and from @code{file-attributes} (@pxref{File Attributes}).
+instead of the current time. The argument should have the same form
+as for @code{current-time-string} (see above). Thus, you can use
+times obtained from @code{current-time} (see above) and from
+@code{file-attributes}. @xref{Definition of file-attributes}.
+@end defun
+
+@defun set-time-zone-rule tz
+This function specifies the local time zone according to @var{tz}. If
+@var{tz} is @code{nil}, that means to use an implementation-defined
+default time zone. If @var{tz} is @code{t}, that means to use
+Universal Time. Otherwise, @var{tz} should be a string specifying a
+time zone rule.
+@end defun
+
+@defun float-time &optional time-value
+This function returns the current time as a floating-point number of
+seconds since the epoch. The argument @var{time-value}, if given,
+specifies a time to convert instead of the current time. The argument
+should have the same form as for @code{current-time-string} (see
+above). Thus, it accepts the output of @code{current-time} and
+@code{file-attributes}.
+
+@emph{Warning}: Since the result is floating point, it may not be
+exact. Do not use this function if precise time stamps are required.
@end defun
@node Time Conversion
to strings or to calendrical information. There is also a function to
convert calendrical information to a time value. You can get time
values from the functions @code{current-time} (@pxref{Time of Day}) and
-@code{file-attributes} (@pxref{File Attributes}).
+@code{file-attributes} (@pxref{Definition of file-attributes}).
Many operating systems are limited to time values that contain 32 bits
of information; these systems typically handle only the times from
traditional Gregorian years do; for example, the year number @minus{}37
represents the Gregorian year 38 B.C@.
+@defun date-to-time string
+This function parses the time-string @var{string} and returns the
+corresponding time value.
+@end defun
+
@defun format-time-string format-string &optional time universal
This function converts @var{time} (or the current time, if @var{time} is
omitted) to a string according to @var{format-string}. The argument
string using that same coding system.
@end defun
-@defun decode-time time
-This function converts a time value into calendrical information. The
-return value is a list of nine elements, as follows:
+@defun seconds-to-time seconds
+This function converts @var{seconds}, a floating point number of
+seconds since the epoch, to a time value and returns that. To perform
+the inverse conversion, use @code{float-time}.
+@end defun
+
+@defun decode-time &optional time
+This function converts a time value into calendrical information. If
+you don't specify @var{time}, it decodes the current time. The return
+value is a list of nine elements, as follows:
@example
(@var{seconds} @var{minutes} @var{hour} @var{day} @var{month} @var{year} @var{dow} @var{dst} @var{zone})
@table @var
@item seconds
The number of seconds past the minute, as an integer between 0 and 59.
+On some operating systems, this is 60 for leap seconds.
@item minutes
The number of minutes past the hour, as an integer between 0 and 59.
@item hour
The optional argument @var{zone} defaults to the current time zone and
its daylight savings time rules. If specified, it can be either a list
(as you would get from @code{current-time-zone}), a string as in the
-@code{TZ} environment variable, or an integer (as you would get from
-@code{decode-time}). The specified zone is used without any further
-alteration for daylight savings time.
+@code{TZ} environment variable, @code{t} for Universal Time, or an
+integer (as you would get from @code{decode-time}). The specified
+zone is used without any further alteration for daylight savings time.
If you pass more than seven arguments to @code{encode-time}, the first
six are used as @var{seconds} through @var{year}, the last argument is
The operating system puts limits on the range of possible time values;
if you try to encode a time that is out of range, an error results.
+For instance, years before 1970 do not work on some systems;
+on others, years as early as 1901 do work.
+@end defun
+
+@node Processor Run Time
+@section Processor Run time
+
+@defun get-internal-run-time
+This function returns the processor run time used by Emacs as a list
+of three integers: @code{(@var{high} @var{low} @var{microsec})}. The
+integers @var{high} and @var{low} combine to give the number of
+seconds, which is
+@ifnottex
+@var{high} * 2**16 + @var{low}.
+@end ifnottex
+@tex
+$high*2^{16}+low$.
+@end tex
+
+The third element, @var{microsec}, gives the microseconds (or 0 for
+systems that return time with the resolution of only one second).
+
+If the system doesn't provide a way to determine the processor run
+time, get-internal-run-time returns the same time as current-time.
+@end defun
+
+@node Time Calculations
+@section Time Calculations
+
+ These functions perform calendrical computations using time values
+(the kind of list that @code{current-time} returns).
+
+@defun time-less-p t1 t2
+This returns @code{t} if time value @var{t1} is less than time value
+@var{t2}.
+@end defun
+
+@defun time-subtract t1 t2
+This returns the time difference @var{t1} @minus{} @var{t2} between
+two time values, in the same format as a time value.
+@end defun
+
+@defun time-add t1 t2
+This returns the sum of two time values, one of which ought to
+represent a time difference rather than a point in time.
+Here is how to add a number of seconds to a time value:
+
+@example
+(time-add @var{time} (seconds-to-time @var{seconds}))
+@end example
+@end defun
+
+@defun time-to-days time
+This function returns the number of days between the beginning of year
+1 and @var{time}.
+@end defun
+
+@defun time-to-day-in-year time
+This returns the day number within the year corresponding to @var{time}.
+@end defun
+
+@defun date-leap-year-p year
+This function returns @code{t} if @var{year} is a leap year.
@end defun
@node Timers
@section Timers for Delayed Execution
@cindex timer
- You can set up a @dfn{timer} to call a function at a specified future time or
-after a certain length of idleness.
+ You can set up a @dfn{timer} to call a function at a specified
+future time or after a certain length of idleness.
Emacs cannot run timers at any arbitrary point in a Lisp program; it
can run them only when Emacs could accept output from a subprocess:
timer's execution may be delayed if Emacs is busy. However, the time of
execution is very precise if Emacs is idle.
-@defun run-at-time time repeat function &rest args
-This function arranges to call @var{function} with arguments @var{args}
-at time @var{time}. The argument @var{function} is a function to call
-later, and @var{args} are the arguments to give it when it is called.
-The time @var{time} is specified as a string.
+ Emacs binds @code{inhibit-quit} to @code{t} before calling the timer
+function, because quitting out of many timer functions can leave
+things in an inconsistent state. This is normally unproblematical
+because most timer functions don't do a lot of work. Indeed, for a
+timer to call a function that takes substantial time to run is likely
+to be annoying.
+
+ It is usually a bad idea for timer functions to alter buffer
+contents. When they do, they usually should call @code{undo-boundary}
+both before and after changing the buffer, to separate the timer's
+changes from user commands' changes and prevent a single undo entry
+from growing to be quite large.
+
+@deffn Command run-at-time time repeat function &rest args
+This sets up a timer that calls the function @var{function} with
+arguments @var{args} at time @var{time}. If @var{repeat} is a number
+(integer or floating point), the timer also runs every @var{repeat}
+seconds after that. If @var{repeat} is @code{nil}, the timer runs
+only once.
+
+@var{time} may specify an absolute or a relative time.
Absolute times may be specified in a wide variety of formats; this
-function tries to accept all the commonly used date formats. Valid
-formats include these two,
+function tries to accept all the commonly used date formats. The most
+convenient formats are strings. Valid such formats include these two,
@example
@var{year}-@var{month}-@var{day} @var{hour}:@var{min}:@var{sec} @var{timezone}
@code{current-time-string} returns is also allowed, and many others
as well.
-To specify a relative time, use numbers followed by units.
+To specify a relative time as a string, use numbers followed by units.
For example:
@table @samp
For relative time values, Emacs considers a month to be exactly thirty
days, and a year to be exactly 365.25 days.
-If @var{time} is a number (integer or floating point), that specifies a
-relative time measured in seconds.
-
-The argument @var{repeat} specifies how often to repeat the call. If
-@var{repeat} is @code{nil}, there are no repetitions; @var{function} is
-called just once, at @var{time}. If @var{repeat} is a number, it
-specifies a repetition period measured in seconds.
+Not all convenient formats are strings. If @var{time} is a number
+(integer or floating point), that specifies a relative time measured
+in seconds.
In most cases, @var{repeat} has no effect on when @emph{first} call
takes place---@var{time} alone specifies that. There is one exception:
The function @code{run-at-time} returns a timer value that identifies
the particular scheduled future action. You can use this value to call
@code{cancel-timer} (see below).
-@end defun
+@end deffn
@defmac with-timeout (seconds timeout-forms@dots{}) body@dots{}
Execute @var{body}, but give up after @var{seconds} seconds. If
a timer to avoid waiting too long for an answer. @xref{Yes-or-No
Queries}.
-@defun run-with-idle-timer secs repeat function &rest args
+@deffn Command run-with-idle-timer secs repeat function &rest args
Set up a timer which runs when Emacs has been idle for @var{secs}
seconds. The value of @var{secs} may be an integer or a floating point
number.
The function @code{run-with-idle-timer} returns a timer value which you
can use in calling @code{cancel-timer} (see below).
-@end defun
+@end deffn
@cindex idleness
Emacs becomes ``idle'' when it starts waiting for user input, and it
@defun cancel-timer timer
Cancel the requested action for @var{timer}, which should be a value
previously returned by @code{run-at-time} or @code{run-with-idle-timer}.
-This cancels the effect of that call to @code{run-at-time}; the arrival
-of the specified time will not cause anything special to happen.
+This cancels the effect of that call to one of these functions; the
+arrival of the specified time will not cause anything special to happen.
@end defun
@node Terminal Input
@cindex input modes
@cindex terminal input modes
-@defun set-input-mode interrupt flow meta quit-char
+@defun set-input-mode interrupt flow meta &optional quit-char
This function sets the mode for reading keyboard input. If
@var{interrupt} is non-null, then Emacs uses input interrupts. If it is
@code{nil}, then it uses @sc{cbreak} mode. The default setting is
If @var{flow} is non-@code{nil}, then Emacs uses @sc{xon/xoff}
(@kbd{C-q}, @kbd{C-s}) flow control for output to the terminal. This
-has no effect except in @sc{cbreak} mode. @xref{Flow Control}.
+has no effect except in @sc{cbreak} mode.
@c Emacs 19 feature
The argument @var{meta} controls support for input character codes
@c Emacs 19 feature
@defvar extra-keyboard-modifiers
This variable lets Lisp programs ``press'' the modifier keys on the
-keyboard. The value is a bit mask:
-
-@table @asis
-@item 1
-The @key{SHIFT} key.
-@item 2
-The @key{LOCK} key.
-@item 4
-The @key{CTL} key.
-@item 8
-The @key{META} key.
-@end table
-
-Each time the user types a keyboard key, it is altered as if the
-modifier keys specified in the bit mask were held down.
+keyboard. The value is a character. Only the modifiers of the
+character matter. Each time the user types a keyboard key, it is
+altered as if those modifier keys were held down. For instance, if
+you bind @code{extra-keyboard-modifiers} to @code{?\C-\M-a}, then all
+keyboard input characters typed during the scope of the binding will
+have the control and meta modifiers applied to them. The character
+@code{?\C-@@}, equivalent to the integer 0, does not count as a control
+character for this purpose, but as a character with no modifiers.
+Thus, setting @code{extra-keyboard-modifiers} to zero cancels any
+modification.
When using a window system, the program can ``press'' any of the
modifier keys in this way. Otherwise, only the @key{CTL} and @key{META}
keys can be virtually pressed.
+
+Note that this variable applies only to events that really come from
+the keyboard, and has no effect on mouse events or any other events.
@end defvar
@defvar keyboard-translate-table
This variable is the translate table for keyboard characters. It lets
you reshuffle the keys on the keyboard without changing any command
bindings. Its value is normally a char-table, or else @code{nil}.
+(It can also be a string or vector, but this is considered obsolete.)
If @code{keyboard-translate-table} is a char-table
(@pxref{Char-Tables}), then each character read from the keyboard is
looked up in this char-table. If the value found there is
non-@code{nil}, then it is used instead of the actual input character.
-In the example below, we set @code{keyboard-translate-table} to a
-char-table. Then we fill it in to swap the characters @kbd{C-s} and
-@kbd{C-\} and the characters @kbd{C-q} and @kbd{C-^}. Subsequently,
-typing @kbd{C-\} has all the usual effects of typing @kbd{C-s}, and vice
-versa. (@xref{Flow Control}, for more information on this subject.)
-
-@cindex flow control example
-@example
-@group
-(defun evade-flow-control ()
- "Replace C-s with C-\ and C-q with C-^."
- (interactive)
-@end group
-@group
- (setq keyboard-translate-table
- (make-char-table 'keyboard-translate-table nil))
-@end group
-@group
- ;; @r{Swap @kbd{C-s} and @kbd{C-\}.}
- (aset keyboard-translate-table ?\034 ?\^s)
- (aset keyboard-translate-table ?\^s ?\034)
-@end group
-@group
- ;; @r{Swap @kbd{C-q} and @kbd{C-^}.}
- (aset keyboard-translate-table ?\036 ?\^q)
- (aset keyboard-translate-table ?\^q ?\036))
-@end group
-@end example
-
Note that this translation is the first thing that happens to a
character after it is read from the terminal. Record-keeping features
such as @code{recent-keys} and dribble files record the characters after
translation.
+
+Note also that this translation is done before the characters are
+supplied to input methods (@pxref{Input Methods}). Use
+@code{translation-table-for-input} (@pxref{Translation of Characters}),
+if you want to translate characters after input methods operate.
@end defvar
@defun keyboard-translate from to
the keyboard translate table if necessary.
@end defun
+ Here's an example of using the @code{keyboard-translate-table} to
+make @kbd{C-x}, @kbd{C-c} and @kbd{C-v} perform the cut, copy and paste
+operations:
+
+@example
+(keyboard-translate ?\C-x 'control-x)
+(keyboard-translate ?\C-c 'control-c)
+(keyboard-translate ?\C-v 'control-v)
+(global-set-key [control-x] 'kill-region)
+(global-set-key [control-c] 'kill-ring-save)
+(global-set-key [control-v] 'yank)
+@end example
+
+@noindent
+On a graphical terminal that supports extended @acronym{ASCII} input,
+you can still get the standard Emacs meanings of one of those
+characters by typing it with the shift key. That makes it a different
+character as far as keyboard translation is concerned, but it has the
+same usual meaning.
+
The remaining translation features translate subsequences of key
sequences being read. They are implemented in @code{read-key-sequence}
and have no effect on input read with @code{read-event}.
@code{function-key-map}.
@item
-@code{key-translation-map} overrides actual key bindings. For example,
-if @kbd{C-x f} has a binding in @code{key-translation-map}, that
-translation takes effect even though @kbd{C-x f} also has a key binding
-in the global map.
+Non-prefix bindings in @code{key-translation-map} override actual key
+bindings. For example, if @kbd{C-x f} has a non-prefix binding in
+@code{key-translation-map}, that translation takes effect even though
+@kbd{C-x f} also has a key binding in the global map.
@end itemize
+Note however that actual key bindings can have an effect on
+@code{key-translation-map}, even though they are overridden by it.
+Indeed, actual key bindings override @code{function-key-map} and thus
+may alter the key sequence that @code{key-translation-map} receives.
+Clearly, it is better to avoid to avoid this type of situation.
+
The intent of @code{key-translation-map} is for users to map one
character set to another, including ordinary characters normally bound
to @code{self-insert-command}.
Finally, if you have enabled keyboard character set decoding using
@code{set-keyboard-coding-system}, decoding is done after the
-translations listed above. @xref{Specifying Coding Systems}. In future
+translations listed above. @xref{Terminal I/O Encoding}. In future
Emacs versions, character set decoding may be done before the other
translations.
100 input events, not counting events generated by keyboard macros.
(These are excluded because they are less interesting for debugging; it
should be enough to see the events that invoked the macros.)
+
+A call to @code{clear-this-command-keys} (@pxref{Command Loop Info})
+causes this function to return an empty vector immediately afterward.
@end defun
@deffn Command open-dribble-file filename
@section Terminal Output
@cindex terminal output
- The terminal output functions send output to the terminal, or keep
+ The terminal output functions send output to a text terminal, or keep
track of output sent to the terminal. The variable @code{baud-rate}
tells you what Emacs thinks is the output speed of the terminal.
@defun send-string-to-terminal string
This function sends @var{string} to the terminal without alteration.
Control characters in @var{string} have terminal-dependent effects.
+This function operates only on text terminals.
One use of this function is to define function keys on terminals that
have downloadable function key definitions. For example, this is how (on
were actually output, you can determine reliably whether they correspond
to the Termcap specifications in use.
-See also @code{open-dribble-file} in @ref{Terminal Input}.
+You close the termscript file by calling this function with an
+argument of @code{nil}.
+
+See also @code{open-dribble-file} in @ref{Recording Input}.
@example
@group
This specifies how loud to play the sound. It should be a number in the
range of 0 to 1. The default is to use whatever volume has been
specified before.
+
+@item :device @var{device}
+This specifies the system device on which to play the sound, as a
+string. The default device is system-dependent.
@end table
Before actually playing the sound, @code{play-sound}
Each function is called with one argument, @var{sound}.
@end defun
+@defun play-sound-file file &optional volume device
+@tindex play-sound-file
+This function is an alternative interface to playing a sound @var{file}
+specifying an optional @var{volume} and @var{device}.
+@end defun
+
@tindex play-sound-functions
@defvar play-sound-functions
A list of functions to be called before playing a sound. Each function
is called with one argument, a property list that describes the sound.
@end defvar
-@node Special Keysyms
-@section System-Specific X11 Keysyms
+@node X11 Keysyms
+@section Operating on X11 Keysyms
To define system-specific X11 keysyms, set the variable
@code{system-key-alist}.
This variable's value should be an alist with one element for each
system-specific keysym. Each element has the form @code{(@var{code}
. @var{symbol})}, where @var{code} is the numeric keysym code (not
-including the ``vendor specific'' bit,
+including the ``vendor specific'' bit,
@ifnottex
-2**28),
@end ifnottex
-@tex
+@tex
$-2^{28}$),
@end tex
and @var{symbol} is the name for the function key.
@ifnottex
-2**28
@end ifnottex
-@tex
+@tex
$-2^{28}$
@end tex
+ 168.
buffer-local. @xref{Multiple Displays}.
@end defvar
-@node Flow Control
-@section Flow Control
-@cindex flow control characters
-
- This section attempts to answer the question ``Why does Emacs use
-flow-control characters in its command character set?'' For a second
-view on this issue, read the comments on flow control in the
-@file{emacs/INSTALL} file from the distribution; for help with Termcap
-entries and DEC terminal concentrators, see @file{emacs/etc/TERMS}.
-
-@cindex @kbd{C-s}
-@cindex @kbd{C-q}
- At one time, most terminals did not need flow control, and none used
-@code{C-s} and @kbd{C-q} for flow control. Therefore, the choice of
-@kbd{C-s} and @kbd{C-q} as command characters for searching and quoting
-was natural and uncontroversial. With so many commands needing key
-assignments, of course we assigned meanings to nearly all @sc{ascii}
-control characters.
-
- Later, some terminals were introduced which required these characters
-for flow control. They were not very good terminals for full-screen
-editing, so Emacs maintainers ignored them. In later years, flow
-control with @kbd{C-s} and @kbd{C-q} became widespread among terminals,
-but by this time it was usually an option. And the majority of Emacs
-users, who can turn flow control off, did not want to switch to less
-mnemonic key bindings for the sake of flow control.
-
- So which usage is ``right''---Emacs's or that of some terminal and
-concentrator manufacturers? This question has no simple answer.
-
- One reason why we are reluctant to cater to the problems caused by
-@kbd{C-s} and @kbd{C-q} is that they are gratuitous. There are other
-techniques (albeit less common in practice) for flow control that
-preserve transparency of the character stream. Note also that their use
-for flow control is not an official standard. Interestingly, on the
-model 33 teletype with a paper tape punch (around 1970), @kbd{C-s} and
-@kbd{C-q} were sent by the computer to turn the punch on and off!
-
- As window systems and PC terminal emulators replace character-only
-terminals, the flow control problem is gradually disappearing. For the
-mean time, Emacs provides a convenient way of enabling flow control if
-you want it: call the function @code{enable-flow-control}.
-
-@deffn Command enable-flow-control
-This function enables use of @kbd{C-s} and @kbd{C-q} for output flow
-control, and provides the characters @kbd{C-\} and @kbd{C-^} as aliases
-for them using @code{keyboard-translate-table} (@pxref{Translating Input}).
-@end deffn
-
-You can use the function @code{enable-flow-control-on} in your
-init file to enable flow control automatically on certain
-terminal types.
-
-@defun enable-flow-control-on &rest termtypes
-This function enables flow control, and the aliases @kbd{C-\} and @kbd{C-^},
-if the terminal type is one of @var{termtypes}. For example:
-
-@smallexample
-(enable-flow-control-on "vt200" "vt300" "vt101" "vt131")
-@end smallexample
-@end defun
-
- Here is how @code{enable-flow-control} does its job:
-
-@enumerate
-@item
-@cindex @sc{cbreak}
-It sets @sc{cbreak} mode for terminal input, and tells the operating
-system to handle flow control, with @code{(set-input-mode nil t)}.
-
-@item
-It sets up @code{keyboard-translate-table} to translate @kbd{C-\} and
-@kbd{C-^} into @kbd{C-s} and @kbd{C-q}. Except at its very
-lowest level, Emacs never knows that the characters typed were anything
-but @kbd{C-s} and @kbd{C-q}, so you can in effect type them as @kbd{C-\}
-and @kbd{C-^} even when they are input for other commands.
-@xref{Translating Input}.
-@end enumerate
-
-If the terminal is the source of the flow control characters, then once
-you enable kernel flow control handling, you probably can make do with
-less padding than normal for that terminal. You can reduce the amount
-of padding by customizing the Termcap entry. You can also reduce it by
-setting @code{baud-rate} to a smaller value so that Emacs uses a smaller
-speed when calculating the padding needed. @xref{Terminal Output}.
+You can specify which keysyms Emacs should use for the Meta, Alt, Hyper, and Super modifiers by setting these variables:
+
+@defvar x-alt-keysym
+@defvarx x-meta-keysym
+@defvarx x-hyper-keysym
+@defvarx x-super-keysym
+The name of the keysym that should stand for the Alt modifier
+(respectively, for Meta, Hyper, and Super). For example, here is
+how to swap the Meta and Alt modifiers within Emacs:
+@lisp
+(setq x-alt-keysym 'meta)
+(setq x-meta-keysym 'alt)
+@end lisp
+@end defvar
@node Batch Mode
@section Batch Mode
to be outputting to an erasable screen. The idea is that you specify
Lisp programs to run; when they are finished, Emacs should exit. The
way to specify the programs to run is with @samp{-l @var{file}}, which
-loads the library named @var{file}, and @samp{-f @var{function}}, which
-calls @var{function} with no arguments.
+loads the library named @var{file}, or @samp{-f @var{function}}, which
+calls @var{function} with no arguments, or @samp{--eval @var{form}}.
Any Lisp program output that would normally go to the echo area,
either using @code{message}, or using @code{prin1}, etc., with @code{t}
as the stream, goes instead to Emacs's standard error descriptor when
-in batch mode. Thus, Emacs behaves much like a noninteractive
+in batch mode. Similarly, input that would normally come from the
+minibuffer is read from the standard input descriptor.
+Thus, Emacs behaves much like a noninteractive
application program. (The echo area output that Emacs itself normally
generates, such as command echoing, is suppressed entirely.)
@defvar noninteractive
This variable is non-@code{nil} when Emacs is running in batch mode.
@end defvar
+
+@node Session Management
+@section Session Management
+@cindex session manager
+
+Emacs supports the X Session Management Protocol for suspension and
+restart of applications. In the X Window System, a program called the
+@dfn{session manager} has the responsibility to keep track of the
+applications that are running. During shutdown, the session manager
+asks applications to save their state, and delays the actual shutdown
+until they respond. An application can also cancel the shutdown.
+
+When the session manager restarts a suspended session, it directs
+these applications to individually reload their saved state. It does
+this by specifying a special command-line argument that says what
+saved session to restore. For Emacs, this argument is @samp{--smid
+@var{session}}.
+
+@defvar emacs-save-session-functions
+@tindex emacs-save-session-functions
+Emacs supports saving state by using a hook called
+@code{emacs-save-session-functions}. Each function in this hook is
+called when the session manager tells Emacs that the window system is
+shutting down. The functions are called with no arguments and with the
+current buffer set to a temporary buffer. Each function can use
+@code{insert} to add Lisp code to this buffer. At the end, Emacs
+saves the buffer in a file that a subsequent Emacs invocation will
+load in order to restart the saved session.
+
+If a function in @code{emacs-save-session-functions} returns
+non-@code{nil}, Emacs tells the session manager to cancel the
+shutdown.
+@end defvar
+
+Here is an example that just inserts some text into @samp{*scratch*} when
+Emacs is restarted by the session manager.
+
+@example
+@group
+(add-hook 'emacs-save-session-functions 'save-yourself-test)
+@end group
+
+@group
+(defun save-yourself-test ()
+ (insert "(save-excursion
+ (switch-to-buffer \"*scratch*\")
+ (insert \"I am restored\"))")
+ nil)
+@end group
+@end example
+
+@ignore
+ arch-tag: 8378814a-30d7-467c-9615-74a80b9988a7
+@end ignore