--enable-carbon-app[=DIR]
specify install directory for Emacs.app on Mac OS X
[DIR=/Application]
- --disable-font-backend don't compile font-backend support
--enable-asserts compile code with asserts enabled
--enable-maintainer-mode
enable make rules and dependencies not useful (and
--without-gpm don't use -lgpm for mouse support on a GNU/Linux
console
--without-dbus don't compile with D-Bus support
+ --without-makeinfo don't require makeinfo for building manuals
--with-pkg-config-prog=PATH
Path to pkg-config for finding GTK and librsvg
fi
+## For the times when you want to build Emacs but don't have
+## a suitable makeinfo, and can live without the manuals.
+
+# Check whether --with-makeinfo was given.
+if test "${with_makeinfo+set}" = set; then
+ withval=$with_makeinfo;
+else
+ with_makeinfo=yes
+fi
+
+
# Check whether --with-gtk was given.
if test "${with_gtk+set}" = set; then
fi
-## Enabled by default.
-# Check whether --enable-font-backend was given.
-if test "${enable_font_backend+set}" = set; then
- enableval=$enable_font_backend; USE_FONT_BACKEND=$enableval
-else
- USE_FONT_BACKEND=yes
-fi
-
-
# Check whether --enable-asserts was given.
if test "${enable_asserts+set}" = set; then
enableval=$enable_asserts; USE_XASSERTS=$enableval
### based on the machine portion of the configuration name, and an s-
### file based on the operating system portion. However, it turns out
### that each m/*.h file is pretty manufacturer-specific - for
-### example hp9000s300.h is a 68000 machine;
-### mips.h, pmax.h are all MIPS
-### machines. So we basically have to have a special case for each
+### example mips.h is MIPS
+### So we basically have to have a special case for each
### configuration name.
###
### As far as handling version numbers on operating systems is
case "${canonical}" in
alpha*-*-netbsd*) machine=alpha ;;
i[3456]86-*-netbsd*) machine=intel386 ;;
- m68k-*-netbsd*)
- # This is somewhat bogus.
- machine=hp9000s300 ;;
- mips-*-netbsd*) machine=pmax ;;
- mipsel-*-netbsd*) machine=pmax ;;
- mipseb-*-netbsd*) machine=pmax ;;
powerpc-*-netbsd*) machine=macppc ;;
sparc*-*-netbsd*) machine=sparc ;;
vax-*-netbsd*) machine=vax ;;
case "${canonical}" in
alpha*-*-openbsd*) machine=alpha ;;
arm-*-openbsd*) machine=arm ;;
- hppa-*-openbsd*) machine=hp9000s300 ;;
i386-*-openbsd*) machine=intel386 ;;
- m68k-*-openbsd*) machine=hp9000s300 ;;
powerpc-*-openbsd*) machine=macppc ;;
sparc*-*-openbsd*) machine=sparc ;;
vax-*-openbsd*) machine=vax ;;
esac
;;
- ## BSDI ports
- *-*-bsdi* )
- opsys=bsdi
- case "${canonical}" in
- i[345]86-*-bsdi*) machine=intel386 ;;
- sparc-*-bsdi*) machine=sparc ;;
- powerpc-*-bsdi*) machine=macppc ;;
- esac
- case "${canonical}" in
- *-*-bsd386* | *-*-bsdi1* ) opsys=bsd386 ;;
- *-*-bsdi2.0* ) opsys=bsdos2 ;;
- *-*-bsdi2* ) opsys=bsdos2-1 ;;
- *-*-bsdi3* ) opsys=bsdos3 ;;
- *-*-bsdi[45]* ) opsys=bsdos4 ;;
- esac
- ;;
-
alpha*-*-linux-gnu* )
machine=alpha opsys=gnu-linux
;;
fi
;;
- ## Cubix QBx/386
- i[3456]86-cubix-sysv* )
- machine=intel386 opsys=usg5-3
- ;;
-
- mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* )
- machine=pmax opsys=bsd4-2
- ;;
- mips-dec-ultrix4.[12]* | mips-dec-bsd* )
- machine=pmax opsys=bsd4-3
- ;;
- mips-dec-ultrix* )
- machine=pmax opsys=ultrix4-3
- ;;
- ## HP 9000 series 200 or 300
- m68*-hp-bsd* )
- machine=hp9000s300 opsys=bsd4-3
- ;;
- ## HP/UX 7, 8, 9, and 10 are supported on these machines.
- m68*-hp-hpux* )
- case "`uname -r`" in
- ## Someone's system reports A.B8.05 for this.
- ## I wonder what other possibilities there are.
- *.B8.* ) machine=hp9000s300 opsys=hpux8 ;;
- *.08.* ) machine=hp9000s300 opsys=hpux8 ;;
- *.09.* ) machine=hp9000s300 opsys=hpux9 ;;
- *.1[0-9].* ) machine=hp9000s300 opsys=hpux9shr ;;
- *) machine=hp9000s300 opsys=hpux ;;
- esac
- ;;
-
## HP 9000 series 700 and 800, running HP/UX
- hppa*-hp-hpux7* )
- machine=hp800 opsys=hpux
- ;;
- hppa*-hp-hpux8* )
- machine=hp800 opsys=hpux8
- ;;
- hppa*-hp-hpux9shr* )
- machine=hp800 opsys=hpux9shr
- ;;
- hppa*-hp-hpux9* )
- machine=hp800 opsys=hpux9
- ;;
hppa*-hp-hpux10.2* )
machine=hp800 opsys=hpux10-20
;;
- hppa*-hp-hpux10* )
- machine=hp800 opsys=hpux10
- ;;
hppa*-hp-hpux1[1-9]* )
machine=hp800 opsys=hpux11
CFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CFLAGS"
machine=hp800 opsys=gnu-linux
;;
- ## HP 9000 series 700 and 800, running HP/UX
- hppa*-hp-hpux* )
- ## Cross-compilation? Nah!
- case "`uname -r`" in
- ## Someone's system reports A.B8.05 for this.
- ## I wonder what other possibilities there are.
- *.B8.* ) machine=hp800 opsys=hpux8 ;;
- *.08.* ) machine=hp800 opsys=hpux8 ;;
- *.09.* ) machine=hp800 opsys=hpux9 ;;
- *) machine=hp800 opsys=hpux10 ;;
- esac
- ;;
- hppa*-*-nextstep* )
- machine=hp800 opsys=nextstep
- ;;
-
## IBM machines
- i370-ibm-aix*)
- machine=ibm370aix opsys=usg5-3
- ;;
s390-*-linux-gnu* )
machine=ibms390 opsys=gnu-linux
;;
s390x-*-linux-gnu* )
machine=ibms390x opsys=gnu-linux
;;
- rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1* )
- machine=ibmrs6000 opsys=aix3-1
- ;;
- rs6000-ibm-aix3.2.5 | powerpc-ibm-aix3.2.5 )
- machine=ibmrs6000 opsys=aix3-2-5
- ;;
- rs6000-ibm-aix4.1* | powerpc-ibm-aix4.1* )
- machine=ibmrs6000 opsys=aix4-1
- ;;
rs6000-ibm-aix4.2* | powerpc-ibm-aix4.2* )
machine=ibmrs6000 opsys=aix4-2
;;
rs6000-ibm-aix5* | powerpc-ibm-aix6* )
machine=ibmrs6000 opsys=aix4-2
;;
- rs6000-ibm-aix4.0* | powerpc-ibm-aix4.0* )
- machine=ibmrs6000 opsys=aix4
- ;;
- rs6000-ibm-aix4* | powerpc-ibm-aix4* )
- machine=ibmrs6000 opsys=aix4-1
- ;;
- rs6000-ibm-aix* | powerpc-ibm-aix* )
- machine=ibmrs6000 opsys=aix3-2
- ;;
-
- ## Prime EXL
- i[3456]86-prime-sysv* )
- machine=i386 opsys=usg5-3
- ;;
-
- ## ncr machine running svr4.3.
- i[3456]86-ncr-sysv4.3 )
- machine=ncr386 opsys=usg5-4-3
- ;;
-
- ## Unspecified sysv on an ncr machine defaults to svr4.2.
- ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.)
- i[3456]86-ncr-sysv* )
- machine=ncr386 opsys=usg5-4-2
- ;;
## Macintosh PowerPC
powerpc*-*-linux-gnu* )
machine=macppc opsys=gnu-linux
;;
- ## Workstations sold by MIPS
- ## This is not necessarily all workstations using the MIPS processor -
- ## Irises are produced by SGI, and DECstations by DEC.
-
- mips-mips-bsd* )
- machine=mips opsys=bsd4-3
- ;;
- mips-mips-* )
- machine=mips opsys=usg5-2-2
- ;;
-
- ## NeXT
- m68*-next-* | m68k-*-nextstep* )
- machine=m68k opsys=nextstep
- ;;
-
- ## NEC EWS4800
- mips-nec-sysv4*)
- machine=ews4800 opsys=ux4800
- ;;
-
- ## Siemens Nixdorf
- mips-siemens-sysv* | mips-sni-sysv*)
- machine=mips-siemens opsys=usg5-4
- NON_GNU_CC=/usr/ccs/bin/cc
- NON_GNU_CPP=/usr/ccs/lib/cpp
- ;;
-
## Silicon Graphics machines
## Iris 4D
mips-sgi-irix6.5 )
case "${canonical}" in
i[3456]86-*-* ) machine=intel386 ;;
amd64-*-*|x86_64-*-*) machine=amdx86-64 ;;
- powerpcle* ) machine=powerpcle ;;
powerpc* | rs6000* ) machine=ibmrs6000 ;;
sparc* ) machine=sparc ;;
* ) unported=yes ;;
emacs_check_sunpro_c=yes
NON_GNU_CPP=/usr/ccs/lib/cpp
;;
- * ) opsys=bsd4-2 ;;
esac
## Watch out for a compiler that we know will not work.
case "${canonical}" in
*) ;;
esac
;;
- sparc-*-nextstep* )
- machine=sparc opsys=nextstep
- ;;
-
- ## Tandem Integrity S2
- mips-tandem-sysv* )
- machine=tandem-s2 opsys=usg5-3
- ;;
## Vaxen.
vax-dec-* )
machine=vax
case "${canonical}" in
- *-bsd4.1* ) opsys=bsd4-1 ;;
- *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* ) opsys=bsd4-2 ;;
- *-bsd4.3* | *-ultrix* ) opsys=bsd4-3 ;;
- *-sysv[01]* | *-sysvr[01]* ) opsys=usg5-0 ;;
- *-sysv2* | *-sysvr2* ) opsys=usg5-2 ;;
*-vms* ) opsys=vms ;;
* ) unported=yes
esac
*-sysv4.2uw* ) opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
*-sysv5uw* ) opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
*-sysv5OpenUNIX* ) opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
- *-386bsd* ) opsys=386bsd ;;
- *-nextstep* ) opsys=nextstep ;;
## Otherwise, we'll fall through to the generic opsys code at the bottom.
esac
;;
machine=mips opsys=gnu-linux
;;
- ## UXP/DS
- sparc-fujitsu-sysv4* )
- machine=sparc opsys=uxpds
- NON_GNU_CPP=/usr/ccs/lib/cpp
- RANLIB="ar -ts"
- ;;
-
## AMD x86-64 Linux-based GNU system
x86_64-*-linux-gnu* )
machine=amdx86-64 opsys=gnu-linux
if test x"${opsys}" = x; then
case "${canonical}" in
*-gnu* ) opsys=gnu ;;
- *-bsd4.[01] ) opsys=bsd4-1 ;;
- *-bsd4.2 ) opsys=bsd4-2 ;;
- *-bsd4.3 ) opsys=bsd4-3 ;;
- *-sysv0 | *-sysvr0 ) opsys=usg5-0 ;;
- *-sysv2 | *-sysvr2 ) opsys=usg5-2 ;;
- *-sysv2.2 | *-sysvr2.2 ) opsys=usg5-2-2 ;;
- *-sysv3* | *-sysvr3* ) opsys=usg5-3 ;;
*-sysv4.2uw* ) opsys=unixware ;;
*-sysv5uw* ) opsys=unixware ;;
*-sysv5OpenUNIX* ) opsys=unixware ;;
esac
fi
-### Tests for sytems that we beleive are obsolete and should be desupported.
-
-case "${machine}" in
- pmax | hp9000s300 | ibm370aix | ncr386 | ews4800 | mips-siemens | powerpcle | tandem-s2 )
- echo "The system that you are configuring on: ${canonical} is considered to be obsolete"
- echo "and it is planned to be desupported in the next version of Emacs"
- echo "Please email emacs-devel@gnu.org as soon as possible if this system is still in use."
- echo "The code is still functional, but you need to edit the 'configure' script and remove the"
- echo "exit 33 line. After that you can run configure again and 'complete' the build."
- exit 33
- ;;
-esac
-
-case "${opsys}" in
- bsd386 | bsdos2-1 | bsdos2 | bsdos3 | bsdos4 | bsd4-1 | bsd4-2 | bsd4-3 | usg5-0 | usg5-2-2 | usg5-2 | usg5-3 | ultrix4-3 | 386bsd | hpux | hpux8 | hpux9 | hpux9shr | hpux10 | hpux10-20 | aix3-1 | aix3-2-5 | aix3-2 | aix4-1 | nextstep | ux4800 | uxpds | uxpv )
- echo "The system that you are configuring on: ${canonical} is considered to be obsolete"
- echo "and it is planned to be desupported in the next version of Emacs"
- echo "Please email emacs-devel@gnu.org as soon as possible if this system is still in use."
- echo "The code is still functional, but you need to edit the 'configure' script and remove the"
- echo "'exit 44' line. After that you can run 'configure' again and complete the build."
- exit 44
- ;;
-esac
-
if test $unported = yes; then
MAKEINFO=no
fi
+## Makeinfo is unusual. For a released Emacs, the manuals are
+## pre-built, and not deleted by the normal clean rules. makeinfo is
+## therefore in the category of "special tools" not normally required, which
+## configure does not have to check for (eg autoconf itself).
+## In a CVS checkout on the other hand, the manuals are not included.
+## So makeinfo is a requirement to build from CVS, and configure
+## should test for it as it does for any other build requirement.
+## We use the presence of $srcdir/info/emacs to distinguish a release,
+## with pre-built manuals, from a CVS checkout.
if test "$MAKEINFO" = "no"; then
- { { echo "$as_me:$LINENO: error: makeinfo >= 4.6 is required " >&5
-echo "$as_me: error: makeinfo >= 4.6 is required " >&2;}
+ if test "x${with_makeinfo}" = "xno"; then
+ MAKEINFO=off
+ elif ! test -e $srcdir/info/emacs; then
+ { { echo "$as_me:$LINENO: error: You do not seem to have makeinfo >= 4.6, and your
+source tree does not seem to have pre-built manuals in the \`info' directory.
+Either install a suitable version of makeinfo, or re-run configure
+with the \`--without-makeinfo' option to build without the manuals. " >&5
+echo "$as_me: error: You do not seem to have makeinfo >= 4.6, and your
+source tree does not seem to have pre-built manuals in the \`info' directory.
+Either install a suitable version of makeinfo, or re-run configure
+with the \`--without-makeinfo' option to build without the manuals. " >&2;}
{ (exit 1); exit 1; }; }
+ fi
fi
-
if test x$GCC = xyes && test "x$GCC_LINK_TEST_OPTIONS" != x
then
ac_link="$ac_link $GCC_LINK_TEST_OPTIONS"
window_system=x11
fi
+## Workaround for bug in autoconf <= 2.62.
+## http://lists.gnu.org/archive/html/emacs-devel/2008-04/msg01551.html
+## No need to do anything special for these standard directories.
+## This is an experiment, take it out if it causes problems.
+if test -n "${x_libraries}" && test x"${x_libraries}" != xNONE; then
+
+ x_libraries=`echo :${x_libraries}: | sed -e 's|:/usr/lib64:|:|g' -e 's|:/lib64:|:|g' -e 's|^:||' -e 's|:$||'`
+
+fi
+
if test "${x_libraries}" != NONE; then
if test -n "${x_libraries}"; then
LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
fi
### Start of font-backend section.
-if test "${HAVE_X11}" != "yes"; then
- USE_FONT_BACKEND=no
-fi
-
-if test "${USE_FONT_BACKEND}" = "yes"; then
-cat >>confdefs.h <<\_ACEOF
-#define USE_FONT_BACKEND 1
-_ACEOF
-
-
- ## Use -lXft if available, unless `--with-freetype=no' nor `--with-xft=no'.
- HAVE_XFT=maybe
- if test "x${with_freetype}" = "xno"; then
- with_xft="no";
- fi
- if test "x${with_xft}" != "xno"; then
+## Use -lXft if available, unless `--with-freetype=no' nor `--with-xft=no'.
+HAVE_XFT=maybe
+if test "x${with_freetype}" = "xno"; then
+ with_xft="no";
+fi
+if test "x${with_xft}" != "xno"; then
succeeded=no
HAVE_XFT=no
fi
- if test "$HAVE_XFT" != no; then
- OLD_CPPFLAGS="$CPPFLAGS"
- OLD_CFLAGS="$CFLAGS"
- OLD_LIBS="$LIBS"
- CPPFLAGS="$CPPFLAGS $XFT_CFLAGS"
- CFLAGS="$CFLAGS $XFT_CFLAGS"
- LIBS="$XFT_LIBS $LIBS"
- if test "${ac_cv_header_X11_Xft_Xft_h+set}" = set; then
+ if test "$HAVE_XFT" != no; then
+ OLD_CPPFLAGS="$CPPFLAGS"
+ OLD_CFLAGS="$CFLAGS"
+ OLD_LIBS="$LIBS"
+ CPPFLAGS="$CPPFLAGS $XFT_CFLAGS"
+ CFLAGS="$CFLAGS $XFT_CFLAGS"
+ LIBS="$XFT_LIBS $LIBS"
+ if test "${ac_cv_header_X11_Xft_Xft_h+set}" = set; then
{ echo "$as_me:$LINENO: checking for X11/Xft/Xft.h" >&5
echo $ECHO_N "checking for X11/Xft/Xft.h... $ECHO_C" >&6; }
if test "${ac_cv_header_X11_Xft_Xft_h+set}" = set; then
- if test "${HAVE_XFT}" = "yes"; then
+ if test "${HAVE_XFT}" = "yes"; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_XFT 1
_ACEOF
- C_SWITCH_X_SITE="$C_SWITCH_X_SITE $XFT_CFLAGS"
- else
- CPPFLAGS="$OLD_CPPFLAGS"
- CFLAGS="$OLD_CFLAGS"
- LIBS="$OLD_LIBS"
- fi # "${HAVE_XFT}" = "yes"
- fi # "$HAVE_XFT" != no
- fi # "x${with_xft}" != "xno"
-
- if test "$HAVE_XFT" != "yes"; then
- HAVE_XFT=no
- fi
+ C_SWITCH_X_SITE="$C_SWITCH_X_SITE $XFT_CFLAGS"
+ else
+ CPPFLAGS="$OLD_CPPFLAGS"
+ CFLAGS="$OLD_CFLAGS"
+ LIBS="$OLD_LIBS"
+ fi # "${HAVE_XFT}" = "yes"
+ fi # "$HAVE_XFT" != no
+fi # "x${with_xft}" != "xno"
+if test "$HAVE_XFT" != "yes"; then
+ HAVE_XFT=no
+fi
- HAVE_FREETYPE=no
- ### Use -lfreetype if available, unless `--with-freetype=no'.
- if test "${HAVE_XFT}" = "yes"; then
- HAVE_FREETYPE=yes
- elif test "x${with_freetype}" != "xno"; then
+
+HAVE_FREETYPE=no
+### Use -lfreetype if available, unless `--with-freetype=no'.
+if test "${HAVE_XFT}" = "yes"; then
+ HAVE_FREETYPE=yes
+elif test "x${with_freetype}" != "xno"; then
succeeded=no
HAVE_FREETYPE=no
fi
- if test "${HAVE_FREETYPE}" = "yes"; then
+ if test "${HAVE_FREETYPE}" = "yes"; then
succeeded=no
HAVE_FC=no
fi
- if test "${HAVE_FC}" = "no"; then
- HAVE_FREETYPE=no
- fi
+ if test "${HAVE_FC}" = "no"; then
+ HAVE_FREETYPE=no
fi
fi
+fi
- HAVE_LIBOTF=no
- if test "${HAVE_FREETYPE}" = "yes"; then
+HAVE_LIBOTF=no
+if test "${HAVE_FREETYPE}" = "yes"; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_FREETYPE 1
_ACEOF
- if test "${with_libotf}" != "no"; then
+ if test "${with_libotf}" != "no"; then
succeeded=no
HAVE_LIBOTF=no
fi
- if test "$HAVE_LIBOTF" = "yes"; then
+ if test "$HAVE_LIBOTF" = "yes"; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBOTF 1
_ACEOF
- fi
fi
fi
+fi
- HAVE_M17N_FLT=no
- if test "${with_m17n_flt}" != "no"; then
+HAVE_M17N_FLT=no
+if test "${with_m17n_flt}" != "no"; then
succeeded=no
HAVE_M17N_FLT=no
fi
- if test "$HAVE_M17N_FLT" = "yes"; then
+ if test "$HAVE_M17N_FLT" = "yes"; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_M17N_FLT 1
_ACEOF
- fi
fi
+fi
-fi # "${USE_FONT_BACKEND}" = "yes"
### End of font-backend section.
### Use -lXpm if available, unless `--with-xpm=no'.
#define HAVE_CARBON 1
_ACEOF
+
+for ac_header in AvailabilityMacros.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
## Specify the install directory
carbon_appdir=
if test "${carbon_appdir_x}" != ""; then
+
+
__fpending mblen mbrlen mbsinit strsignal setitimer ualarm index rindex \
sendto recvfrom getsockopt setsockopt getsockname getpeername \
gai_strerror mkstemp getline getdelim mremap memmove fsync sync bzero \
-memset memcmp difftime memcpy mempcpy mblen mbrlen posix_memalign
+memset memcmp difftime memcpy mempcpy mblen mbrlen posix_memalign \
+cfmakeraw cfsetspeed
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
{ echo "$as_me:$LINENO: checking for $ac_func" >&5
# endif
#endif
+#include <limits.h>
#include <stdlib.h>
#ifdef HAVE_UNISTD_H
isn't worth using anyway. */
alarm (60);
- for (time_t_max = 1; 0 < time_t_max; time_t_max *= 2)
- continue;
- time_t_max--;
- if ((time_t) -1 < 0)
- for (time_t_min = -1; (time_t) (time_t_min * 2) < 0; time_t_min *= 2)
- continue;
+ for (;;)
+ {
+ t = (time_t_max << 1) + 1;
+ if (t <= time_t_max)
+ break;
+ time_t_max = t;
+ }
+ time_t_min = - ((time_t) ~ (time_t) 0 == (time_t) -1) - time_t_max;
+
delta = time_t_max / 997; /* a suitable prime number */
for (i = 0; i < N_STRINGS; i++)
{
&& mktime_test ((time_t) (60 * 60 * 24))))
return 1;
- for (j = 1; 0 < j; j *= 2)
+ for (j = 1; ; j <<= 1)
if (! bigtime_test (j))
return 1;
- if (! bigtime_test (j - 1))
+ else if (INT_MAX / 2 < j)
+ break;
+ if (! bigtime_test (INT_MAX))
return 1;
}
return ! (irix_6_4_bug () && spring_forward_gap () && year_2050_test ());
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <stdio.h>
+#include <sys/types.h> /* for off_t */
+ #include <stdio.h>
int
main ()
{
-return fseeko (stdin, 0, 0) && (fseeko) (stdin, 0, 0);
+int (*fp) (FILE *, off_t, int) = fseeko;
+ return fseeko (stdin, 0, 0) && fp (stdin, 0, 0);
;
return 0;
}
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#define _LARGEFILE_SOURCE 1
-#include <stdio.h>
+#include <sys/types.h> /* for off_t */
+ #include <stdio.h>
int
main ()
{
-return fseeko (stdin, 0, 0) && (fseeko) (stdin, 0, 0);
+int (*fp) (FILE *, off_t, int) = fseeko;
+ return fseeko (stdin, 0, 0) && fp (stdin, 0, 0);
;
return 0;
}
#define USE_X_TOOLKIT 1
_ACEOF
- if test "${USE_X_TOOLKIT}" == "LUCID"; then
+ if test "${USE_X_TOOLKIT}" = "LUCID"; then
cat >>confdefs.h <<\_ACEOF
#define USE_LUCID 1
_ACEOF
- elif test "${USE_X_TOOLKIT}" == "MOTIF"; then
+ elif test "${USE_X_TOOLKIT}" = "MOTIF"; then
cat >>confdefs.h <<\_ACEOF
#define USE_MOTIF 1
echo " Does Emacs use -lrsvg-2? ${HAVE_RSVG}"
echo " Does Emacs use -lgpm? ${HAVE_GPM}"
echo " Does Emacs use -ldbus? ${HAVE_DBUS}"
-echo " Does Emacs use a font backend? ${USE_FONT_BACKEND}"
if test "${USE_FONT_BACKEND}" = "yes"; then
echo " Does Emacs use -lfreetype? ${HAVE_FREETYPE}"