/* Simple built-in editing commands.
- Copyright (C) 1985, 93, 94, 95, 1996 Free Software Foundation, Inc.
+ Copyright (C) 1985, 1993, 1994, 1995, 1996, 1997, 1998, 2001, 2002,
+ 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This file is part of GNU Emacs.
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
#include <config.h>
#include "syntax.h"
#include "window.h"
#include "keyboard.h"
+#include "keymap.h"
+#include "dispextern.h"
Lisp_Object Qkill_forward_chars, Qkill_backward_chars, Vblink_paren_function;
/* This is the command that set up Vself_insert_face. */
Lisp_Object Vself_insert_face_command;
-/* Offset to add to a non-ASCII value when inserting it. */
-int nonascii_insert_offset;
-
extern Lisp_Object Qface;
+extern Lisp_Object Vtranslation_table_for_input;
\f
-/* Return buffer position which is N characters after `point'. */
-int
-forward_point (n)
- int n;
-{
- int pos = PT, c;
-
- if (!NILP (current_buffer->enable_multibyte_characters))
- {
- /* Simply adding N to `point' doesn't work because of multi-byte
- form. We had better not use INC_POS and DEC_POS because they
- check the gap position every time. But, for the moment, we
- need working code. */
- if (n > 0)
- {
- while (pos < ZV && n--) INC_POS (pos);
- if (pos < ZV) n++;
- }
- else
- {
- while (pos > BEGV && n++) DEC_POS (pos);
- if (pos > BEGV) n--;
- }
- }
- pos += n;
-
- return pos;
-}
-
DEFUN ("forward-point", Fforward_point, Sforward_point, 1, 1, 0,
- "Return buffer position N characters after (before if N negative) point.")
- (n)
+ doc: /* Return buffer position N characters after (before if N negative) point. */)
+ (n)
Lisp_Object n;
{
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
- return make_number (forward_point (XINT (n)));
+ return make_number (PT + XINT (n));
}
DEFUN ("forward-char", Fforward_char, Sforward_char, 0, 1, "p",
- "Move point right N characters (left if N is negative).\n\
-On reaching end of buffer, stop and signal error.")
- (n)
+ doc: /* Move point right N characters (left if N is negative).
+On reaching end of buffer, stop and signal error. */)
+ (n)
Lisp_Object n;
{
if (NILP (n))
XSETFASTINT (n, 1);
else
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
/* This used to just set point to point + XINT (n), and then check
to see if it was within boundaries. But now that SET_PT can
hooks, etcetera), that's not a good approach. So we validate the
proposed position, then set point. */
{
- int new_point = forward_point (XINT (n));
+ int new_point = PT + XINT (n);
if (new_point < BEGV)
{
}
DEFUN ("backward-char", Fbackward_char, Sbackward_char, 0, 1, "p",
- "Move point left N characters (right if N is negative).\n\
-On attempt to pass beginning or end of buffer, stop and signal error.")
- (n)
+ doc: /* Move point left N characters (right if N is negative).
+On attempt to pass beginning or end of buffer, stop and signal error. */)
+ (n)
Lisp_Object n;
{
if (NILP (n))
XSETFASTINT (n, 1);
else
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
XSETINT (n, - XINT (n));
return Fforward_char (n);
}
DEFUN ("forward-line", Fforward_line, Sforward_line, 0, 1, "p",
- "Move N lines forward (backward if N is negative).\n\
-Precisely, if point is on line I, move to the start of line I + N.\n\
-If there isn't room, go as far as possible (no error).\n\
-Returns the count of lines left to move. If moving forward,\n\
-that is N - number of lines moved; if backward, N + number moved.\n\
-With positive N, a non-empty line at the end counts as one line\n\
- successfully moved (for the return value).")
- (n)
+ doc: /* Move N lines forward (backward if N is negative).
+Precisely, if point is on line I, move to the start of line I + N.
+If there isn't room, go as far as possible (no error).
+Returns the count of lines left to move. If moving forward,
+that is N - number of lines moved; if backward, N + number moved.
+With positive N, a non-empty line at the end counts as one line
+ successfully moved (for the return value). */)
+ (n)
Lisp_Object n;
{
- int pos2 = PT;
- int pos;
- int count, shortage, negp;
+ int opoint = PT, opoint_byte = PT_BYTE;
+ int pos, pos_byte;
+ int count, shortage;
if (NILP (n))
count = 1;
else
{
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
count = XINT (n);
}
- negp = count <= 0;
- pos = scan_buffer ('\n', pos2, 0, count - negp, &shortage, 1);
+ if (count <= 0)
+ shortage = scan_newline (PT, PT_BYTE, BEGV, BEGV_BYTE, count - 1, 1);
+ else
+ shortage = scan_newline (PT, PT_BYTE, ZV, ZV_BYTE, count, 1);
+
+ /* Since scan_newline does TEMP_SET_PT_BOTH,
+ and we want to set PT "for real",
+ go back to the old point and then come back here. */
+ pos = PT;
+ pos_byte = PT_BYTE;
+ TEMP_SET_PT_BOTH (opoint, opoint_byte);
+ SET_PT_BOTH (pos, pos_byte);
+
if (shortage > 0
- && (negp
+ && (count <= 0
|| (ZV > BEGV
- && pos != pos2
- && FETCH_BYTE (pos - 1) != '\n')))
+ && PT != opoint
+ && (FETCH_BYTE (PT_BYTE - 1) != '\n'))))
shortage--;
- SET_PT (pos);
- return make_number (negp ? - shortage : shortage);
+
+ return make_number (count <= 0 ? - shortage : shortage);
}
-DEFUN ("beginning-of-line", Fbeginning_of_line, Sbeginning_of_line,
- 0, 1, "p",
- "Move point to beginning of current line.\n\
-With argument N not nil or 1, move forward N - 1 lines first.\n\
-If scan reaches end of buffer, stop there without error.")
- (n)
+DEFUN ("beginning-of-line", Fbeginning_of_line, Sbeginning_of_line, 0, 1, "p",
+ doc: /* Move point to beginning of current line.
+With argument N not nil or 1, move forward N - 1 lines first.
+If point reaches the beginning or end of buffer, it stops there.
+
+This function constrains point to the current field unless this moves
+point to a different line than the original, unconstrained result. If
+N is nil or 1, and a front-sticky field starts at point, the point
+does not move. To ignore field boundaries bind
+`inhibit-field-text-motion' to t, or use the `forward-line' function
+instead. For instance, `(forward-line 0)' does the same thing as
+`(beginning-of-line)', except that it ignores field boundaries. */)
+ (n)
Lisp_Object n;
{
if (NILP (n))
XSETFASTINT (n, 1);
else
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
SET_PT (XINT (Fline_beginning_position (n)));
+
return Qnil;
}
-DEFUN ("end-of-line", Fend_of_line, Send_of_line,
- 0, 1, "p",
- "Move point to end of current line.\n\
-With argument N not nil or 1, move forward N - 1 lines first.\n\
-If scan reaches end of buffer, stop there without error.")
- (n)
+DEFUN ("end-of-line", Fend_of_line, Send_of_line, 0, 1, "p",
+ doc: /* Move point to end of current line.
+With argument N not nil or 1, move forward N - 1 lines first.
+If point reaches the beginning or end of buffer, it stops there.
+To ignore intangibility, bind `inhibit-point-motion-hooks' to t.
+
+This function constrains point to the current field unless this moves
+point to a different line than the original, unconstrained result. If
+N is nil or 1, and a rear-sticky field ends at point, the point does
+not move. To ignore field boundaries bind `inhibit-field-text-motion'
+to t. */)
+ (n)
Lisp_Object n;
{
- register int pos;
- register int stop;
+ int newpos;
if (NILP (n))
XSETFASTINT (n, 1);
else
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
+
+ while (1)
+ {
+ newpos = XINT (Fline_end_position (n));
+ SET_PT (newpos);
+
+ if (PT > newpos
+ && FETCH_CHAR (PT - 1) == '\n')
+ {
+ /* If we skipped over a newline that follows
+ an invisible intangible run,
+ move back to the last tangible position
+ within the line. */
- SET_PT (XINT (Fline_end_position (n)));
+ SET_PT (PT - 1);
+ break;
+ }
+ else if (PT > newpos && PT < ZV
+ && FETCH_CHAR (PT) != '\n')
+ /* If we skipped something intangible
+ and now we're not really at eol,
+ keep going. */
+ n = make_number (1);
+ else
+ break;
+ }
return Qnil;
}
DEFUN ("delete-char", Fdelete_char, Sdelete_char, 1, 2, "p\nP",
- "Delete the following N characters (previous if N is negative).\n\
-Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).\n\
-Interactively, N is the prefix arg, and KILLFLAG is set if\n\
-N was explicitly specified.")
- (n, killflag)
+ doc: /* Delete the following N characters (previous if N is negative).
+Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).
+Interactively, N is the prefix arg, and KILLFLAG is set if
+N was explicitly specified. */)
+ (n, killflag)
Lisp_Object n, killflag;
{
int pos;
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
- pos = forward_point (XINT (n));
+ pos = PT + XINT (n);
if (NILP (killflag))
{
if (XINT (n) < 0)
}
DEFUN ("delete-backward-char", Fdelete_backward_char, Sdelete_backward_char,
- 1, 2, "p\nP",
- "Delete the previous N characters (following if N is negative).\n\
-Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).\n\
-Interactively, N is the prefix arg, and KILLFLAG is set if\n\
-N was explicitly specified.")
- (n, killflag)
+ 1, 2, "p\nP",
+ doc: /* Delete the previous N characters (following if N is negative).
+Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).
+Interactively, N is the prefix arg, and KILLFLAG is set if
+N was explicitly specified. */)
+ (n, killflag)
Lisp_Object n, killflag;
{
Lisp_Object value;
int deleted_special = 0;
- int pos, i;
+ int pos, pos_byte, i;
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
/* See if we are about to delete a tab or newline backwards. */
pos = PT;
- for (i = 0; i < XINT (n) && pos > BEGV; i++)
+ pos_byte = PT_BYTE;
+ for (i = 0; i < XINT (n) && pos_byte > BEGV_BYTE; i++)
{
int c;
- DEC_POS (pos);
- c = FETCH_BYTE (pos);
+ DEC_BOTH (pos, pos_byte);
+ c = FETCH_BYTE (pos_byte);
if (c == '\t' || c == '\n')
{
deleted_special = 1;
if (XINT (n) > 0
&& ! NILP (current_buffer->overwrite_mode)
&& ! deleted_special
- && ! (PT == ZV || FETCH_BYTE (PT) == '\n'))
+ && ! (PT == ZV || FETCH_BYTE (PT_BYTE) == '\n'))
{
- int column = current_column ();
+ int column = (int) current_column (); /* iftc */
value = Fdelete_char (make_number (-XINT (n)), killflag);
- i = column - current_column ();
- Finsert_char (make_number (' '), i);
- SET_PT (PT - i);
+ i = column - (int) current_column (); /* iftc */
+ Finsert_char (make_number (' '), make_number (i), Qnil);
+ /* Whitespace chars are ASCII chars, so we can simply subtract. */
+ SET_PT_BOTH (PT - i, PT_BYTE - i);
}
else
value = Fdelete_char (make_number (-XINT (n)), killflag);
return value;
}
+/* Note that there's code in command_loop_1 which typically avoids
+ calling this. */
DEFUN ("self-insert-command", Fself_insert_command, Sself_insert_command, 1, 1, "p",
- "Insert the character you type.\n\
-Whichever character you type to run this command is inserted.")
- (n)
+ doc: /* Insert the character you type.
+Whichever character you type to run this command is inserted. */)
+ (n)
Lisp_Object n;
{
- int character = XINT (last_command_char);
-
- CHECK_NUMBER (n, 0);
+ CHECK_NUMBER (n);
/* Barf if the key that invoked this was not a character. */
if (!INTEGERP (last_command_char))
bitch_at_user ();
- else if (XINT (n) >= 2 && NILP (current_buffer->overwrite_mode))
- {
- int modified_char = character;
- /* Add the offset to the character, for Finsert_char.
- We pass internal_self_insert the unmodified character
- because it itself does this offsetting. */
- if (modified_char >= 0200 && modified_char <= 0377
- && ! NILP (current_buffer->enable_multibyte_characters))
- modified_char += nonascii_insert_offset;
-
- XSETFASTINT (n, XFASTINT (n) - 2);
- /* The first one might want to expand an abbrev. */
- internal_self_insert (character, 1);
- /* The bulk of the copies of this char can be inserted simply.
- We don't have to handle a user-specified face specially
- because it will get inherited from the first char inserted. */
- Finsert_char (make_number (modified_char), n, Qt);
- /* The last one might want to auto-fill. */
- internal_self_insert (character, 0);
- }
- else
- while (XINT (n) > 0)
+ {
+ int character = translate_char (Vtranslation_table_for_input,
+ XINT (last_command_char), 0, 0, 0);
+ if (XINT (n) >= 2 && NILP (current_buffer->overwrite_mode))
{
- /* Ok since old and new vals both nonneg */
- XSETFASTINT (n, XFASTINT (n) - 1);
- internal_self_insert (character, XFASTINT (n) != 0);
+ int modified_char = character;
+ /* Add the offset to the character, for Finsert_char.
+ We pass internal_self_insert the unmodified character
+ because it itself does this offsetting. */
+ if (! NILP (current_buffer->enable_multibyte_characters))
+ modified_char = unibyte_char_to_multibyte (modified_char);
+
+ XSETFASTINT (n, XFASTINT (n) - 2);
+ /* The first one might want to expand an abbrev. */
+ internal_self_insert (character, 1);
+ /* The bulk of the copies of this char can be inserted simply.
+ We don't have to handle a user-specified face specially
+ because it will get inherited from the first char inserted. */
+ Finsert_char (make_number (modified_char), n, Qt);
+ /* The last one might want to auto-fill. */
+ internal_self_insert (character, 0);
}
+ else
+ while (XINT (n) > 0)
+ {
+ /* Ok since old and new vals both nonneg */
+ XSETFASTINT (n, XFASTINT (n) - 1);
+ internal_self_insert (character, XFASTINT (n) != 0);
+ }
+ }
return Qnil;
}
return 0. A value of 1 indicates this *might* not have been simple.
A value of 2 means this did things that call for an undo boundary. */
+static Lisp_Object Qexpand_abbrev;
+
+int
internal_self_insert (c, noautofill)
int c;
int noautofill;
{
- extern Lisp_Object Fexpand_abbrev ();
int hairy = 0;
Lisp_Object tem;
register enum syntaxcode synt;
- Lisp_Object overwrite;
+ Lisp_Object overwrite, string;
/* Length of multi-byte form of C. */
int len;
/* Working buffer and pointer for multi-byte form of C. */
- unsigned char workbuf[4], *str;
-
- if (c >= 0200 && c <= 0377
- && ! NILP (current_buffer->enable_multibyte_characters))
- c += nonascii_insert_offset;
+ unsigned char str[MAX_MULTIBYTE_LENGTH];
+ int chars_to_delete = 0;
+ int spaces_to_insert = 0;
overwrite = current_buffer->overwrite_mode;
- if (!NILP (Vbefore_change_function) || !NILP (Vafter_change_function)
- || !NILP (Vbefore_change_functions) || !NILP (Vafter_change_functions))
+ if (!NILP (Vbefore_change_functions) || !NILP (Vafter_change_functions))
hairy = 1;
/* At first, get multi-byte form of C in STR. */
if (!NILP (current_buffer->enable_multibyte_characters))
- len = CHAR_STRING (c, workbuf, str);
+ {
+ c = unibyte_char_to_multibyte (c);
+ len = CHAR_STRING (c, str);
+ if (len == 1)
+ /* If C has modifier bits, this makes C an appropriate
+ one-byte char. */
+ c = *str;
+ }
else
- workbuf[0] = c, str = workbuf, len = 1;
-
+ {
+ str[0] = (SINGLE_BYTE_CHAR_P (c)
+ ? c
+ : multibyte_char_to_unibyte (c, Qnil));
+ len = 1;
+ }
if (!NILP (overwrite)
&& PT < ZV)
{
we fill columns with spaces, if C is wider than C2, we delete
C2 and several characters following C2. */
- /* A code at `point'. Since this is checked only against
- NEWLINE and TAB, we don't need a character code but only the
- first byte of multi-byte form. */
- unsigned char c2 = FETCH_BYTE (PT);
- /* A column the cursor should be placed at after this insertion.
+ /* This is the character after point. */
+ int c2 = FETCH_CHAR (PT_BYTE);
+
+ /* Column the cursor should be placed at after this insertion.
The correct value should be calculated only when necessary. */
int target_clm = 0;
- /* Overwriting in binary-mode always substitute C2 by C. But,
- overwriting in textual-mode does this substitution in the
- case that C is not NEWLINE and C2 is not NEWLINE nor TAB. If
- C2 is TAB, the substitution is done only when C2 is currently
- expanded to 0 column, or more than 20 columns, or more than
- the width of C. */
+ /* Overwriting in binary-mode always replaces C2 by C.
+ Overwriting in textual-mode doesn't always do that.
+ It inserts newlines in the usual way,
+ and inserts any character at end of line
+ or before a tab if it doesn't use the whole width of the tab. */
if (EQ (overwrite, Qoverwrite_mode_binary)
|| (c != '\n'
&& c2 != '\n'
- && (target_clm = current_column() + WIDTH_BY_CHAR_HEAD (str[0]),
- (c2 != '\t'
- || XINT (current_buffer->tab_width) <= 0
- || XFASTINT (current_buffer->tab_width) > 20
- || !(target_clm % XFASTINT (current_buffer->tab_width))))))
+ && ! (c2 == '\t'
+ && XINT (current_buffer->tab_width) > 0
+ && XFASTINT (current_buffer->tab_width) < 20
+ && (target_clm = ((int) current_column () /* iftc */
+ + XINT (Fchar_width (make_number (c)))),
+ target_clm % XFASTINT (current_buffer->tab_width)))))
{
+ int pos = PT;
+ int pos_byte = PT_BYTE;
+
if (target_clm == 0)
- del_range (PT, forward_point (1));
+ chars_to_delete = 1;
else
{
- int pos = point;
/* The actual cursor position after the trial of moving
to column TARGET_CLM. It is greater than TARGET_CLM
if the TARGET_CLM is middle of multi-column
character. In that case, the new point is set after
that character. */
- int actual_clm = XFASTINT (Fmove_to_column (target_clm));
+ int actual_clm
+ = XFASTINT (Fmove_to_column (make_number (target_clm), Qnil));
+
+ chars_to_delete = PT - pos;
- del_range (pos, PT);
if (actual_clm > target_clm)
{
- /* We deleted too many columns. Let's fill columns
+ /* We will delete too many columns. Let's fill columns
by spaces so that the remaining text won't move. */
- insert(" ", actual_clm - target_clm);
- SET_PT (pos);
+ spaces_to_insert = actual_clm - target_clm;
}
}
+ SET_PT_BOTH (pos, pos_byte);
hairy = 2;
}
hairy = 2;
int modiff = MODIFF;
Lisp_Object sym;
- sym = Fexpand_abbrev ();
+ sym = call0 (Qexpand_abbrev);
- /* If we expanded an abbrev which has only a hook,
+ /* If we expanded an abbrev which has a hook,
and the hook has a non-nil `no-self-insert' property,
return right away--don't really self-insert. */
if (! NILP (sym) && ! NILP (XSYMBOL (sym)->function)
if (MODIFF != modiff)
hairy = 2;
}
- if ((c == ' ' || c == '\n')
+
+ if (chars_to_delete)
+ {
+ string = make_string_from_bytes (str, 1, len);
+ if (spaces_to_insert)
+ {
+ tem = Fmake_string (make_number (spaces_to_insert),
+ make_number (' '));
+ string = concat2 (tem, string);
+ }
+
+ replace_range (PT, PT + chars_to_delete, string, 1, 1, 1);
+ Fforward_char (make_number (1 + spaces_to_insert));
+ }
+ else
+ insert_and_inherit (str, len);
+
+ if ((CHAR_TABLE_P (Vauto_fill_chars)
+ ? !NILP (CHAR_TABLE_REF (Vauto_fill_chars, c))
+ : (c == ' ' || c == '\n'))
&& !noautofill
&& !NILP (current_buffer->auto_fill_function))
{
Lisp_Object tem;
- insert_and_inherit (str, len);
if (c == '\n')
- /* After inserting a newline, move to previous line and fill */
- /* that. Must have the newline in place already so filling and */
- /* justification, if any, know where the end is going to be. */
- SET_PT (PT - 1);
+ /* After inserting a newline, move to previous line and fill
+ that. Must have the newline in place already so filling and
+ justification, if any, know where the end is going to be. */
+ SET_PT_BOTH (PT - 1, PT_BYTE - 1);
tem = call0 (current_buffer->auto_fill_function);
- if (c == '\n')
- SET_PT (PT + 1);
+ /* Test PT < ZV in case the auto-fill-function is strange. */
+ if (c == '\n' && PT < ZV)
+ SET_PT_BOTH (PT + 1, PT_BYTE + 1);
if (!NILP (tem))
hairy = 2;
}
- else
- insert_and_inherit (str, len);
-#ifdef HAVE_FACES
/* If previous command specified a face to use, use it. */
if (!NILP (Vself_insert_face)
&& EQ (current_kboard->Vlast_command, Vself_insert_face_command))
{
- Lisp_Object before, after;
- XSETINT (before, PT - len);
- XSETINT (after, PT);
- Fput_text_property (before, after, Qface, Vself_insert_face, Qnil);
+ Fput_text_property (make_number (PT - 1), make_number (PT),
+ Qface, Vself_insert_face, Qnil);
Vself_insert_face = Qnil;
}
-#endif
+
synt = SYNTAX (c);
if ((synt == Sclose || synt == Smath)
&& !NILP (Vblink_paren_function) && INTERACTIVE
\f
/* module initialization */
+void
syms_of_cmds ()
{
Qkill_backward_chars = intern ("kill-backward-chars");
Qoverwrite_mode_binary = intern ("overwrite-mode-binary");
staticpro (&Qoverwrite_mode_binary);
+ Qexpand_abbrev = intern ("expand-abbrev");
+ staticpro (&Qexpand_abbrev);
+
DEFVAR_LISP ("self-insert-face", &Vself_insert_face,
- "If non-nil, set the face of the next self-inserting character to this.\n\
-See also `self-insert-face-command'.");
+ doc: /* If non-nil, set the face of the next self-inserting character to this.
+See also `self-insert-face-command'. */);
Vself_insert_face = Qnil;
DEFVAR_LISP ("self-insert-face-command", &Vself_insert_face_command,
- "This is the command that set up `self-insert-face'.\n\
-If `last-command' does not equal this value, we ignore `self-insert-face'.");
+ doc: /* This is the command that set up `self-insert-face'.
+If `last-command' does not equal this value, we ignore `self-insert-face'. */);
Vself_insert_face_command = Qnil;
DEFVAR_LISP ("blink-paren-function", &Vblink_paren_function,
- "Function called, if non-nil, whenever a close parenthesis is inserted.\n\
-More precisely, a char with closeparen syntax is self-inserted.");
+ doc: /* Function called, if non-nil, whenever a close parenthesis is inserted.
+More precisely, a char with closeparen syntax is self-inserted. */);
Vblink_paren_function = Qnil;
- DEFVAR_INT ("nonascii-insert-offset", &nonascii_insert_offset,
- "Offset to add to a non-ascii code 0200...0377 when inserting it.\n\
-This applies only when multibyte characters are enabled, and it serves\n\
-to convert a Latin-1 or similar 8-bit character code to the corresponding\n\
-Emacs character code.");
- nonascii_insert_offset = 0;
-
defsubr (&Sforward_point);
defsubr (&Sforward_char);
defsubr (&Sbackward_char);
defsubr (&Sself_insert_command);
}
+void
keys_of_cmds ()
{
int n;
initial_define_key (global_map, Ctl ('F'), "forward-char");
initial_define_key (global_map, 0177, "delete-backward-char");
}
+
+/* arch-tag: 022ba3cd-67f9-4978-9c5d-7d2b18d8644e
+ (do not change this comment) */