@c This is part of the Emacs manual.
-@c Copyright (C) 1985, 86, 87, 93, 94, 95, 97, 00, 2001
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001,
+@c 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Minibuffer, M-x, Basic, Top
@chapter The Minibuffer
@cindex prompt
When the minibuffer is in use, it appears in the echo area, and the
terminal's cursor moves there. The beginning of the minibuffer line
-displays a @dfn{prompt} which says what kind of input you should supply and
-how it will be used. Often this prompt is derived from the name of the
-command that the argument is for. The prompt normally ends with a colon.
+displays a @dfn{prompt} in a special color, to say what kind of input
+you should supply and how it will be used. Often this prompt is
+derived from the name of the command that the argument is for. The
+prompt normally ends with a colon.
@cindex default argument
Sometimes a @dfn{default argument} appears in parentheses after the
anything.
@item
-If in the minibuffer you use a command whose purpose is to print a
-message in the echo area, such as @kbd{C-x =}, the message is printed
-normally, and the minibuffer is hidden for a while. It comes back
-after a few seconds, or as soon as you type anything.
+If in the minibuffer you use a command whose purpose is to display a
+message in the echo area, such as @kbd{C-x =}, the message hides the
+minibuffer for a while. The minibuffer contents come back after a few
+seconds, or as soon as you type anything.
@item
Echoing of keystrokes does not take place while the minibuffer is in
you which directory the file will be found in if you do not specify a
directory.
-@c Separate paragraph to clean up ugly pagebreak--rms
+@c Separate paragraph to clean up ugly page break--rms
@need 1500
For example, the minibuffer might start out with these contents:
@end example
@noindent
-where @samp{Find File:@: } is the prompt. Typing @kbd{buffer.c}
-specifies the file @file{/u2/emacs/src/buffer.c}. To find files in
-nearby directories, use @kbd{..}; thus, if you type
+where @samp{Find File:@: } is the prompt. Typing @kbd{buffer.c} as
+input specifies the file @file{/u2/emacs/src/buffer.c}. To find files
+in nearby directories, use @kbd{..}; thus, if you type
@kbd{../lisp/simple.el}, you will get the file named
@file{/u2/emacs/lisp/simple.el}. Alternatively, you can kill with
@kbd{M-@key{DEL}} the directory names you don't want (@pxref{Words}).
Since @key{RET} in the minibuffer is defined to exit the minibuffer,
you can't use it to insert a newline in the minibuffer. To do that,
-type @kbd{C-o} or @kbd{C-q C-j}. (Recall that a newline is really the
-character control-J.)
+type @kbd{C-o} or @kbd{C-q C-j}. (On text terminals, newline is
+really the @acronym{ASCII} character control-J.)
The minibuffer has its own window which always has space on the screen
but acts as if it were not there when the minibuffer is not in use. When
@vindex resize-mini-windows
The minibuffer window expands vertically as necessary to hold the
-text that you put in the minibuffer, if @code{resize-mini-windows} is
-non-@code{nil}. If @code{resize-mini-windows} is @code{t}, the window
-is always resized to fit the size of the text it displays. If
-@code{resize-mini-windows} is the symbol @code{grow-only}, the window
-grows when the size of displayed text increases, but shrinks (back to
-the normal size) only when the minibuffer becomes inactive.
+text that you put in the minibuffer. If @code{resize-mini-windows} is
+@code{t} (the default), the window is always resized to fit the size
+of the text it displays. If its value is the symbol @code{grow-only},
+the window grows when the size of displayed text increases, but
+shrinks (back to the normal size) only when the minibuffer becomes
+inactive. If its value is @code{nil}, you have to adjust the height
+yourself.
@vindex max-mini-window-height
The variable @code{max-mini-window-height} controls the maximum
maximum number of lines; @code{nil} means do not resize the minibuffer
window automatically. The default value is 0.25.
- If while in the minibuffer you issue a command that displays help text
-of any sort in another window, you can use the @kbd{C-M-v} command while
-in the minibuffer to scroll the help text. This lasts until you exit
-the minibuffer. This feature is especially useful when you display
-a buffer listing possible completions. @xref{Other Window}.
+ If, while in the minibuffer, you issue a command that displays help
+text of any sort in another window, you can use the @kbd{C-M-v}
+command while in the minibuffer to scroll the help text.
+(@kbd{M-@key{PAGEUP}} and @kbd{M-@key{PAGEDOWN}} also operate on that
+help text.) This lasts until you exit the minibuffer. This feature
+is especially useful when you display a buffer listing possible
+completions. @xref{Other Window}.
@vindex enable-recursive-minibuffers
Emacs normally disallows most commands that use the minibuffer while
can be determined from the part you have typed.
When completion is available, certain keys---@key{TAB}, @key{RET}, and
-@key{SPC}---are rebound to complete the text present in the minibuffer
+@key{SPC}---are rebound to complete the text in the minibuffer before point
into a longer string that it stands for, by matching it against a set of
@dfn{completion alternatives} provided by the command reading the
argument. @kbd{?} is defined to display a list of possible completions
For example, when @kbd{M-x} uses the minibuffer to read the name of a
command, it provides a list of all available Emacs command names to
-complete against. The completion keys match the text in the minibuffer
+complete against. The completion keys match the minibuffer text
against all the command names, find any additional name characters
implied by the ones already present in the minibuffer, and add those
characters to the ones you have given. This is what makes it possible
Completion does ignore case distinctions for certain arguments in which
case does not matter.
+ Completion acts only on the text before point. If there is text in
+the minibuffer after point---i.e., if you move point backward after
+typing some text into the minibuffer---it remains unchanged.
+
@menu
-* Example: Completion Example.
-* Commands: Completion Commands.
-* Strict Completion::
-* Options: Completion Options.
+* Example: Completion Example. Examples of using completion.
+* Commands: Completion Commands. A list of completion commands.
+* Strict Completion:: Different types of completion.
+* Options: Completion Options. Options for completion.
@end menu
@node Completion Example
@table @kbd
@item @key{TAB}
-Complete the text in the minibuffer as much as possible
+Complete the text before point in the minibuffer as much as possible
(@code{minibuffer-complete}).
@item @key{SPC}
-Complete the minibuffer text, but don't go beyond one word
+Complete the minibuffer text before point, but don't go beyond one word
(@code{minibuffer-complete-word}).
@item @key{RET}
Submit the text in the minibuffer as the argument, possibly completing
-first as described below (@code{minibuffer-complete-and-exit}).
+first as described
+@iftex
+in the next subsection (@code{minibuffer-complete-and-exit}).
+@end iftex
+@ifnottex
+in the next node (@code{minibuffer-complete-and-exit}). @xref{Strict
+Completion}.
+@end ifnottex
@item ?
-Print a list of all possible completions of the text in the minibuffer
-(@code{minibuffer-list-completions}).
+Display a list of all possible completions of the text in the minibuffer
+(@code{minibuffer-completion-help}).
@end table
@kindex SPC
@table @kbd
@findex mouse-choose-completion
-@item Mouse-2
-Clicking mouse button 2 on a completion in the list of possible
+@item Mouse-1
+@itemx Mouse-2
+Clicking mouse button 1 or 2 on a completion in the list of possible
completions chooses that completion (@code{mouse-choose-completion}).
You normally use this command while point is in the minibuffer, but you
must click in the list of completions, not in the minibuffer itself.
strings, then they are not ignored. Ignored extensions do not apply to
lists of completions---those always mention all possible completions.
+ If an element of the list in @code{completion-ignored-extensions} ends
+in a slash @file{/}, it indicates a subdirectory that should be ignored
+when completing file names. (Elements of
+@code{completion-ignored-extensions} which do not end in a slash are
+never considered when a completion candidate is a directory; thus,
+completion returns directories whose names end in @file{.elc} even
+though there's an element @code{".elc"} in the list.)
+
@vindex completion-auto-help
Normally, a completion command that cannot determine even one
additional character automatically displays a list of all possible
complete to @file{/usr/bin/foo}.
To enable this mode, use the command @kbd{M-x
-partial-completion-mode}, or customize the option
+partial-completion-mode}, or customize the variable
@code{partial-completion-mode}. This binds the partial completion
commands to @key{TAB}, @key{SPC}, @key{RET}, and @kbd{?}. The usual
-completion commands are available on @kbd{M-@key{TAB}},
-@kbd{M-@key{SPC}}, @kbd{M-@key{RET}} and @kbd{M-?}.
+completion commands are available on @kbd{M-@key{TAB}} (or
+@kbd{C-M-i}), @kbd{M-@key{SPC}}, @kbd{M-@key{RET}} and @kbd{M-?}.
@vindex PC-include-file-path
@vindex PC-disable-includes
Another feature of Partial Completion mode is to extend
-@code{find-file} so that the @samp{<@var{include}>} stands for the
+@code{find-file} so that @samp{<@var{include}>} stands for the
file named @var{include} in some directory in the path
@code{PC-include-file-path}. If you set @code{PC-disable-includes} to
non-@code{nil}, this feature is disabled.
@findex previous-history-element
The simplest way to reuse the saved arguments in the history list is
to move through the history list one element at a time. While in the
-minibuffer, use @kbd{M-p} or up-arrow (@code{previous-history-element})
-to ``move to'' the next earlier minibuffer input, and use @kbd{M-n} or
-down-arrow (@code{next-history-element}) to ``move to'' the next later
-input.
+minibuffer, use @kbd{M-p} or up-arrow
+(@code{previous-history-element}) to ``move to'' the next earlier
+minibuffer input, and use @kbd{M-n} or down-arrow
+(@code{next-history-element}) to ``move to'' the next later input.
+These commands don't move the cursor, they bring different saved
+strings into the minibuffer. But you can think of them as ``moving''
+through the history list.
The previous input that you fetch from the history entirely replaces
the contents of the minibuffer. To use it as the argument, exit the
@code{history-length} is @code{t}, though, there is no maximum length
and elements are never deleted.
+@vindex history-delete-duplicates
+ The variable @code{history-delete-duplicates} specifies whether to
+delete duplicates in history. If the value of @code{history-delete-duplicates}
+is @code{t}, that means when adding a new history element, all
+previous identical elements are deleted.
+
@node Repetition
@section Repeating Minibuffer Commands
@cindex command history
the command name.
@findex list-command-history
-@c widecommands
@table @kbd
@item C-x @key{ESC} @key{ESC}
Re-execute a recent minibuffer command (@code{repeat-complex-command}).
you can edit its expression as usual and then resubmit it by typing
@key{RET} as usual.
+@vindex isearch-resume-in-command-history
+ Incremental search does not, strictly speaking, use the minibuffer,
+but it does something similar. Although it behaves like a complex command,
+it normally does not appear in the history list for @kbd{C-x
+@key{ESC} @key{ESC}}. You can make it appear in the history by
+setting @code{isearch-resume-in-command-history} to a non-@code{nil}
+value. @xref{Incremental Search}.
+
@vindex command-history
The list of previous minibuffer-using commands is stored as a Lisp
list in the variable @code{command-history}. Each element is a Lisp
expression which describes one command and its arguments. Lisp programs
can re-execute a command by calling @code{eval} with the
@code{command-history} element.
+
+@ignore
+ arch-tag: ba913cfd-b70e-400f-b663-22b2c309227f
+@end ignore