-#\r
-# Makefile definition file for building GNU Emacs on Windows NT\r
-# \r
-# GNU Emacs is free software; you can redistribute it and/or modify\r
-# it under the terms of the GNU General Public License as published by\r
-# the Free Software Foundation; either version 2, or (at your option)\r
-# any later version.\r
-# \r
-# GNU Emacs is distributed in the hope that it will be useful,\r
-# but WITHOUT ANY WARRANTY; without even the implied warranty of\r
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
-# GNU General Public License for more details.\r
-# \r
-# You should have received a copy of the GNU General Public License\r
-# along with GNU Emacs; see the file COPYING. If not, write to\r
-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r
-# Boston, MA 02111-1307, USA.\r
-\r
-# Ensure 'all' is the default target\r
-all:\r
-\r
-# NOTES\r
-# \r
-# I tried to force gmake to use the native shell for simplicity, by\r
-# setting SHELL as below, but this didn't work reliably because of\r
-# various case sensitivity niggles. Specifically, COMSPEC (which is in\r
-# fact usually spelled ComSpec on NT, to make life difficult) typically\r
-# references "cmd.exe" (on NT) when the file is actually called\r
-# "CMD.EXE" on disk for hysterical raisons. As a result, GNU make\r
-# thinks it doesn't exist (unless compiled with a switch to ignore\r
-# case), and so doesn't change which shell it will invoke to execute\r
-# commands.\r
-# \r
-# It would be possible, though very tedious using just gmake facilities,\r
-# to convert the COMSPEC value to uppercase to solve this problem, but\r
-# it isn't worth it. That is partly because, even when using the native\r
-# shell, gmake tends to not be happy with backslashes in command\r
-# strings. The obvious solution is to use forward slashes as much as\r
-# possible, which can be made to work most of the time (putting\r
-# filenames in quotes often helps), but there are still some internal\r
-# cmd.exe commands like `del' and `copy' that won't work with them.\r
-# Although it is possible to convert slashes to backslashes when\r
-# necessary, gmake requires explicitly calling its subst function, which\r
-# nmake does not understand). For this reason, it is simplest to\r
-# mandate that rm and cp be available, so we can use Unix-format file\r
-# names everywhere. (Fortunately both MS and GNU make, and the\r
-# respective compilers, are happy with Unix-format names.)\r
-# \r
-# Since we cannot easily force the choice of a particular shell, we must\r
-# make the effort to cope with whichever shell is being used.\r
-# Fortunately, the only command we need to use that is shell specific is\r
-# the testing of a file's existence for the purpose of working out when\r
-# we are copying files to their original location. That particular\r
-# requirement is abstracted easily enough.\r
-# \r
-# The only other problem area was the change of directory when running\r
-# temacs to dump emacs.exe (where gmake doesn't support cd foo in any\r
-# useful way), but that has been resolved by modifying the Windows\r
-# unexec function slightly to not require the directory change while\r
-# still allowing objects and binaries to be in subdirectories.\r
-\r
-# This doesn't work.\r
-#SHELL:=$(COMSPEC)\r
-\r
-# Determine whether make is using sh or cmd/command as shell; cmd.exe\r
-# will output "ECHO is on" when echo is given by itself, while sh will\r
-# not produce any output.\r
-sh_output := $(shell echo)\r
-ifeq "$(findstring ECHO, $(sh_output))" "ECHO"\r
-THE_SHELL = $(COMSPEC)$(ComSpec)\r
-else\r
-USING_SH = 1\r
-THE_SHELL = $(SHELL)\r
-endif\r
-\r
-MAKEDIR = $(CURDIR)\r
-ALL_DEPS = $^\r
-EMPTY =\r
-SPACE = $(EMPTY) $(EMPTY)\r
-\r
-SUBSYSTEM_WINDOWS=-Wl,-subsystem,windows\r
-SUBSYSTEM_CONSOLE=-Wl,-subsystem,console\r
-\r
-# INSTALL_DIR is the directory into which emacs will be installed.\r
-#\r
-ifndef INSTALL_DIR\r
-INSTALL_DIR = $(MAKEDIR)/..\r
-endif\r
-\r
-# Determine the architecture we're running on.\r
-# Define ARCH for our purposes; \r
-# Define CPU for use by ntwin32.mak;\r
-# Define CONFIG_H to the appropriate config.h for the system;\r
-#\r
-ifdef PROCESSOR_ARCHITECTURE\r
-# We're on Windows NT\r
-CPU = $(PROCESSOR_ARCHITECTURE)\r
-CONFIG_H = config.nt\r
-OS_TYPE = windowsnt\r
- ifeq "$(PROCESSOR_ARCHITECTURE)" "x86"\r
-ARCH = i386\r
-CPU = i386\r
- else\r
- ifeq "$(PROCESSOR_ARCHITECTURE)" "MIPS"\r
-ARCH = mips\r
- else\r
- ifeq "$(PROCESSOR_ARCHITECTURE)" "ALPHA"\r
-ARCH = alpha\r
- else\r
- ifeq "$(PROCESSOR_ARCHITECTURE)" "PPC"\r
-ARCH = ppc\r
- else\r
-error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"\r
- endif\r
- endif\r
- endif\r
- endif\r
-else\r
-# We're on Windows 95\r
-ARCH = i386\r
-CPU = i386\r
-CONFIG_H = config.nt\r
-OS_TYPE = windows95\r
-endif\r
-\r
-AR = ar -rsc\r
-AR_OUT =\r
-CC = gcc\r
-CC_OUT = -o$(SPACE)\r
-LINK = gcc\r
-LINK_OUT = -o$(SPACE)\r
-RC = windres -O coff\r
-RC_OUT = -o$(SPACE)\r
-RC_INCLUDE = --include-dir$(SPACE)\r
-\r
-libc = \r
-baselibs = \r
-O = o\r
-A = a\r
-\r
-BASE_LIBS = $(libc) $(baselibs)\r
-\r
-ADVAPI32 = -ladvapi32\r
-COMDLG32 = -lcomdlg32\r
-GDI32 = -lgdi32\r
-MPR = -lmpr\r
-SHELL32 = -lshell32\r
-USER32 = -luser32\r
-WSOCK32 = -lwsock32\r
-\r
-ifdef NOOPT\r
-DEBUG_CFLAGS = -DEMACSDEBUG\r
-else\r
-DEBUG_CFLAGS = \r
-endif\r
-CFLAGS = -I. -DWIN32_LEAN_AND_MEAN $(ARCH_CFLAGS) -D$(ARCH) \\r
- -D_CRTAPI1=_cdecl \\r
- $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)\r
-EMACS_EXTRA_C_FLAGS = -DUSE_CRT_DLL=1\r
-\r
-# see comments in allocate_heap in w32heap.c before changing any of the\r
-# -stack, -heap, or -image-base settings.\r
-TEMACS_EXTRA_LINK = -Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 -g $(SUBSYSTEM_CONSOLE) -Wl,-entry,__start -Wl,-Map,$(BLD)/temacs.map\r
-\r
-ifdef NOOPT\r
-OBJDIR = oo\r
-else\r
-OBJDIR = oo-spd\r
-endif\r
-$(OBJDIR):; -mkdir "$(OBJDIR)"\r
-BLD = $(OBJDIR)/$(ARCH)\r
-$(BLD): $(OBJDIR)\r
- -mkdir "$(BLD)"\r
-\r
-CP = cp -f\r
-CP_DIR = cp -rf\r
-DEL = rm\r
-DEL_TREE = rm -r\r
-ifdef USING_SH\r
-IFNOTSAMEDIR = if [ ! -s ../same-dir.tst ] ; then\r
-FOREACH = for f in\r
-FORVAR = $${f}\r
-FORDO = ; do\r
-ENDFOR = ; done\r
-ENDIF = ; fi\r
-ARGQUOTE = '\r
-DQUOTE = ""\r
-else\r
-IFNOTSAMEDIR = if not exist ../same-dir.tst\r
-FOREACH = for %%f in (\r
-FORVAR = %%f\r
-FORDO = ) do\r
-ENDFOR =\r
-ENDIF =\r
-ARGQUOTE = "\r
-DQUOTE = \"\r
-endif\r
-\r
-# The location of the icon file\r
-EMACS_ICON_PATH = ../nt/emacs.ico\r
-\r
-ifdef NODEBUG\r
-DEBUG_FLAG = \r
-else\r
-DEBUG_FLAG = -g\r
-endif\r
-\r
-ifdef NOCYGWIN\r
-NOCYGWIN = -mno-cygwin\r
-endif\r
-\r
-ifeq "$(ARCH)" "i386"\r
-ifdef NOOPT\r
-ARCH_CFLAGS = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN)\r
-else\r
-ARCH_CFLAGS = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN) -mcpu=i686 -O2 \\r
- # -fbuiltin \\r
- # -finline-functions \\r
- # -fomit-frame-pointer\r
-endif\r
-ARCH_LDFLAGS = $(SYS_LDFLAGS)\r
-else\r
-ERROR Unknown architecture type "$(ARCH)".\r
-endif\r
-\r
-LINK_FLAGS = $(ARCH_LDFLAGS) $(NOCYGWIN) $(USER_LDFLAGS)\r
-\r
-.DEFAULT:\r
-\r
-$(BLD)/%.o: %.c\r
- $(CC) $(CFLAGS) $(CC_OUT)$@ $<\r
+# -*- Makefile -*- definition file for building GNU Emacs on Windows NT.
+# Copyright (C) 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301, USA.
+
+# Ensure 'all' is the default target
+all:
+
+# NOTES
+#
+# I tried to force gmake to use the native shell for simplicity, by
+# setting SHELL as below, but this didn't work reliably because of
+# various case sensitivity niggles. Specifically, COMSPEC (which is in
+# fact usually spelled ComSpec on NT, to make life difficult) typically
+# references "cmd.exe" (on NT) when the file is actually called
+# "CMD.EXE" on disk for hysterical raisons. As a result, GNU make
+# thinks it doesn't exist (unless compiled with a switch to ignore
+# case), and so doesn't change which shell it will invoke to execute
+# commands.
+#
+# It would be possible, though very tedious using just gmake facilities,
+# to convert the COMSPEC value to uppercase to solve this problem, but
+# it isn't worth it. That is partly because, even when using the native
+# shell, gmake tends to not be happy with backslashes in command
+# strings. The obvious solution is to use forward slashes as much as
+# possible, which can be made to work most of the time (putting
+# filenames in quotes often helps), but there are still some internal
+# cmd.exe commands like `del' and `copy' that won't work with them.
+# Although it is possible to convert slashes to backslashes when
+# necessary, gmake requires explicitly calling its subst function, which
+# nmake does not understand). For this reason, it is simplest to
+# mandate that rm and cp be available, so we can use Unix-format file
+# names everywhere. (Fortunately both MS and GNU make, and the
+# respective compilers, are happy with Unix-format names.)
+#
+# Since we cannot easily force the choice of a particular shell, we must
+# make the effort to cope with whichever shell is being used.
+# Fortunately, the only command we need to use that is shell specific is
+# the testing of a file's existence for the purpose of working out when
+# we are copying files to their original location. That particular
+# requirement is abstracted easily enough.
+#
+# The only other problem area was the change of directory when running
+# temacs to dump emacs.exe (where gmake doesn't support cd foo in any
+# useful way), but that has been resolved by modifying the Windows
+# unexec function slightly to not require the directory change while
+# still allowing objects and binaries to be in subdirectories.
+
+# This doesn't work.
+#SHELL:=$(COMSPEC)
+
+# Determine whether make is using sh or cmd/command as shell; cmd.exe
+# will output "ECHO is on" when echo is given by itself, while sh will
+# not produce any output.
+sh_output := $(shell echo)
+ifeq "$(findstring ECHO, $(sh_output))" "ECHO"
+THE_SHELL = $(COMSPEC)$(ComSpec)
+SHELLTYPE=CMD
+else
+USING_SH = 1
+THE_SHELL = $(SHELL)
+SHELLTYPE=SH
+endif
+
+MAKETYPE=gmake
+
+# The following "ifeq" does not appear to DTRT, and therefore breaks
+# the build on mingw32. Also the -m option does not exist in many
+# (reasonably recent even) versions of Cygwin. These issues need to be
+# remedied before putting this cygpath kludge back in.
+
+# Convert CURDIR to native file name, if in Cygwin format
+#ifeq "$(shell cygpath $(CURDIR))" "$(CURDIR)"
+#CURDIR := $(shell cygpath -m $(CURDIR))
+#endif
+
+THISDIR = .
+
+# Cygwin has changed quoting rules somewhat since b20, in a way that
+# affects makefiles using sh as the command processor, so we need to
+# detect which rules to use.
+ifdef USING_SH
+sh_output := $(shell echo [Please ignore a syntax error on the next line - it is intentional] 1>&2)
+sh_output := $(shell echo foo")
+ifeq "$(sh_output)" ""
+NEW_CYGWIN = 1
+endif
+endif
+
+ALL_DEPS = $^
+EMPTY =
+SPACE = $(EMPTY) $(EMPTY)
+
+SUBSYSTEM_WINDOWS=-Wl,-subsystem,windows
+SUBSYSTEM_CONSOLE=-Wl,-subsystem,console
+
+# INSTALL_DIR is the directory into which emacs will be installed.
+#
+ifndef INSTALL_DIR
+INSTALL_DIR = $(CURDIR)/..
+endif
+
+export EMACSLOADPATH
+
+# Determine the architecture we're running on.
+# Define ARCH for our purposes;
+# Define CPU for use by ntwin32.mak;
+# Define CONFIG_H to the appropriate config.h for the system;
+#
+ifdef PROCESSOR_ARCHITECTURE
+# We're on Windows NT
+CPU = $(PROCESSOR_ARCHITECTURE)
+CONFIG_H = config.nt
+OS_TYPE = windowsnt
+ ifeq "$(PROCESSOR_ARCHITECTURE)" "x86"
+ARCH = i386
+CPU = i386
+ else
+ ifeq "$(PROCESSOR_ARCHITECTURE)" "MIPS"
+ARCH = mips
+ else
+ ifeq "$(PROCESSOR_ARCHITECTURE)" "ALPHA"
+ARCH = alpha
+ else
+ ifeq "$(PROCESSOR_ARCHITECTURE)" "PPC"
+ARCH = ppc
+ else
+error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
+ endif
+ endif
+ endif
+ endif
+else
+# We're on Windows 95
+ARCH = i386
+CPU = i386
+CONFIG_H = config.nt
+OS_TYPE = windows95
+endif
+
+AR = ar -rsc
+AR_OUT =
+CC = gcc
+CC_OUT = -o$(SPACE)
+LINK = gcc
+LINK_OUT = -o$(SPACE)
+RC = windres -O coff
+RC_OUT = -o$(SPACE)
+RC_INCLUDE = --include-dir$(SPACE)
+
+libc =
+baselibs =
+O = o
+A = a
+
+BASE_LIBS = $(libc) $(baselibs)
+
+ADVAPI32 = -ladvapi32
+COMDLG32 = -lcomdlg32
+GDI32 = -lgdi32
+MPR = -lmpr
+SHELL32 = -lshell32
+USER32 = -luser32
+WSOCK32 = -lwsock32
+WINMM = -lwinmm
+WINSPOOL = -lwinspool
+
+ifdef NOOPT
+DEBUG_CFLAGS = -DEMACSDEBUG
+else
+DEBUG_CFLAGS =
+endif
+CFLAGS = -I. -DWIN32_LEAN_AND_MEAN -D_WIN32_WINNT=0x0400 $(ARCH_CFLAGS) -D$(ARCH) \
+ -D_CRTAPI1=_cdecl \
+ $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
+EMACS_EXTRA_C_FLAGS = -DUSE_CRT_DLL=1
+
+# see comments in allocate_heap in w32heap.c before changing any of the
+# -stack, -heap, or -image-base settings.
+TEMACS_EXTRA_LINK = -Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 $(SUBSYSTEM_CONSOLE) -Wl,-entry,__start -Wl,-Map,$(BLD)/temacs.map
+
+ifdef NOOPT
+OBJDIR = oo
+else
+OBJDIR = oo-spd
+endif
+$(OBJDIR):; -mkdir "$(OBJDIR)"
+BLD = $(OBJDIR)/$(ARCH)
+$(BLD): $(OBJDIR)
+ -mkdir "$(BLD)"
+
+COMPILER_TEMP_FILES =
+
+CP = cp -f
+CP_DIR = cp -rf
+DEL = rm
+DEL_TREE = rm -r
+
+ifdef USING_SH
+
+IFNOTSAMEDIR = if [ ! -s ../same-dir.tst ] ; then
+FOREACH = for f in
+FORVAR = $${f}
+FORDO = ; do
+ENDFOR = ; done
+ENDIF = ; fi
+ARGQUOTE = '
+ifdef NEW_CYGWIN
+DQUOTE = "
+else
+DQUOTE = ""
+endif
+
+else
+
+IFNOTSAMEDIR = if not exist ../same-dir.tst
+FOREACH = for %%f in (
+FORVAR = %%f
+FORDO = ) do
+ENDFOR =
+ENDIF =
+ARGQUOTE = "
+DQUOTE = \"
+
+endif
+
+ifdef NODEBUG
+DEBUG_FLAG =
+DEBUG_LINK =
+else
+DEBUG_FLAG = -gstabs+ -g3
+DEBUG_LINK = -gstabs+ -g3
+endif
+
+ifdef NOCYGWIN
+NOCYGWIN = -mno-cygwin
+endif
+
+ifeq "$(ARCH)" "i386"
+ifdef NOOPT
+ARCH_CFLAGS = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN)
+else
+ARCH_CFLAGS = -D_X86_=1 -c $(DEBUG_FLAG) $(NOCYGWIN) $(MCPU_FLAG) -O2 \
+ # -fbuiltin \
+ # -finline-functions \
+ # -fomit-frame-pointer
+endif
+ARCH_LDFLAGS = $(SYS_LDFLAGS)
+else
+ERROR Unknown architecture type "$(ARCH)".
+endif
+
+LINK_FLAGS = $(ARCH_LDFLAGS) $(DEBUG_LINK) $(NOCYGWIN) $(USER_LDFLAGS)
+
+.DEFAULT:
+
+$(BLD)/%.o: %.c
+ $(CC) $(CFLAGS) $(CC_OUT)$@ $<
+
+# arch-tag: 35eb9662-8534-4bcf-b891-0730a09d657f