@c This is part of the Emacs manual.
-@c Copyright (C) 1985, 86, 87, 93, 94, 95, 1997 Free Software Foundation, Inc.
+@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2002, 2003,
+@c 2004, 2005, 2006 Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Indentation, Text, Major Modes, Top
@chapter Indentation
Perform @key{RET} followed by @key{TAB} (@code{newline-and-indent}).
@item M-^
Merge the previous and the current line (@code{delete-indentation}).
-This would cancel out the effect of @kbd{C-j}.
+This would cancel the effect of a preceding @kbd{C-j}.
@item C-M-o
Split the current line at point; text on the line after point becomes a
new line indented to the same column where point is located
Move (forward or back) to the first nonblank character on the current
line (@code{back-to-indentation}).
@item C-M-\
-Indent several lines to the same column (@code{indent-region}).
+Indent lines in the region to the same column (@code{indent-region}).
@item C-x @key{TAB}
-Shift a block of lines rigidly right or left (@code{indent-rigidly}).
+Shift lines in the region rigidly right or left (@code{indent-rigidly}).
@item M-i
Indent from point to the next prespecified tab stop column
(@code{tab-to-tab-stop}).
A tab character is displayed as a stretch of whitespace which extends
to the next display tab stop position, and the default width of a tab
-stop is eight. @xref{Display Custom}, for more details.
+stop is eight. @xref{Text Display}, for more details.
@item
-Advance to the next tab stop. You can set tab stops at your choice of
-column positions, then type @kbd{M-i} to advance to the next tab stop.
-The default is to have tab stops every eight columns, which means by
-default @kbd{M-i} inserts a tab character. To set the tab stops, use
-@kbd{M-x edit-tab-stops}.
+Insert whitespace up to the next tab stop. You can set tab stops at
+your choice of column positions, then type @kbd{M-i} to advance to the
+next tab stop. The default tab stop settings have a tab stop every
+eight columns, which means by default @kbd{M-i} inserts a tab
+character. To set the tab stops, use @kbd{M-x edit-tab-stops}.
@item
Align a line with the previous line. More precisely, the command
type @key{TAB}, it aligns the line as a whole.
@end enumerate
- Normally, all of the above methods insert an optimal mix of tabs and
+ Normally, most of the above methods insert an optimal mix of tabs and
spaces to align to the desired column. @xref{Just Spaces}, for how to
disable use of tabs. However, @kbd{C-q @key{TAB}} always inserts a
-tab, even they are disabled for the indentation commands.
-
-@c In Text mode, @key{TAB} runs the command @code{tab-to-tab-stop}, which
-@c indents to the next tab stop column. You can set the tab stops with
-@c @kbd{M-x edit-tab-stops}.
+tab, even when tabs are disabled for the indentation commands.
@menu
* Indentation Commands:: Various commands and techniques for indentation.
@findex back-to-indentation
To move over the indentation on a line, do @kbd{M-m}
(@code{back-to-indentation}). This command, given anywhere on a line,
-positions point at the first nonblank character on the line.
+positions point at the first nonblank character on the line, if any,
+or else at the end of the line.
To insert an indented line before the current line, do @kbd{C-a C-o
@key{TAB}}. To make an indented line after the current line, use
@kindex M-^
@findex delete-indentation
To join two lines cleanly, use the @kbd{M-^}
-(@code{delete-indentation}) command. It deletes the indentation at the
-front of the current line, and the line boundary as well, replacing them
-with a single space. As a special case (useful for Lisp code) the
-single space is omitted if the characters to be joined are consecutive
-open parentheses or closing parentheses, or if the junction follows
-another newline. To delete just the indentation of a line, go to the
-beginning of the line and use @kbd{M-\}
+(@code{delete-indentation}) command. It deletes the indentation at
+the front of the current line, and the line boundary as well,
+replacing them with a single space. As a special case (useful for
+Lisp code) the single space is omitted if the characters to be joined
+are consecutive open parentheses or closing parentheses, or if the
+junction follows another newline. To delete just the indentation of a
+line, go to the beginning of the line and use @kbd{M-\}
(@code{delete-horizontal-space}), which deletes all spaces and tabs
around the cursor.
@findex indent-region
@findex indent-rigidly
There are also commands for changing the indentation of several lines
-at once. @kbd{C-M-\} (@code{indent-region}) applies to all the lines
-that begin in the region; it indents each line in the ``usual'' way, as
-if you had typed @key{TAB} at the beginning of the line. A numeric
-argument specifies the column to indent to, and each line is shifted
-left or right so that its first nonblank character appears in that
-column. @kbd{C-x @key{TAB}} (@code{indent-rigidly}) moves all of the
-lines in the region right by its argument (left, for negative
+at once. They apply to all the lines that begin in the region.
+@kbd{C-M-\} (@code{indent-region}) indents each line in the ``usual''
+way, as if you had typed @key{TAB} at the beginning of the line. A
+numeric argument specifies the column to indent to, and each line is
+shifted left or right so that its first nonblank character appears in
+that column. @kbd{C-x @key{TAB}} (@code{indent-rigidly}) moves all of
+the lines in the region right by its argument (left, for negative
arguments). The whole group of lines moves rigidly sideways, which is
-how the command gets its name.@refill
+how the command gets its name.
@cindex remove indentation
- If you want to remove all indentation from all of the line in the
-region, invoke @kbd{C-x @key{TAB}} with a large negative argument,
-such as -1000.
+ To remove all indentation from all of the lines in the region,
+invoke @kbd{C-x @key{TAB}} with a large negative argument, such as
+-1000.
@findex indent-relative
@kbd{M-x indent-relative} indents at point based on the previous line
(actually, the last nonempty line). It inserts whitespace at point, moving
-point, until it is underneath an indentation point in the previous line.
+point, until it is underneath the next indentation point in the previous line.
An indentation point is the end of a sequence of whitespace or the end of
the line. If point is farther right than any indentation point in the
-previous line, the whitespace before point is deleted and the first
-indentation point then applicable is used. If no indentation point is
-applicable even then, @code{indent-relative} runs @code{tab-to-tab-stop}
+previous line, @code{indent-relative} runs @code{tab-to-tab-stop}
@ifinfo
(@pxref{Tab Stops}),
@end ifinfo
unless it is called with a numeric argument, in which case it does
nothing.
- @code{indent-relative} is the definition of @key{TAB} in Indented Text
-mode. @xref{Text}.
-
@xref{Format Indentation}, for another way of specifying the
indentation for part of your text.
@cindex tables, indentation for
@kindex M-i
@findex tab-to-tab-stop
- For typing in tables, you can use Text mode's definition of @key{TAB},
-@code{tab-to-tab-stop}. This command inserts indentation before point,
-enough to reach the next tab stop column. If you are not in Text mode,
-this command can be found on the key @kbd{M-i}.
+ For typing in tables, you can use @kbd{M-i} (@code{tab-to-tab-stop}).
+This command inserts indentation before point, enough to reach the
+next tab stop column.
@findex edit-tab-stops
@findex edit-tab-stops-note-changes
edit-tab-stops}, which creates and selects a buffer containing a
description of the tab stop settings. You can edit this buffer to
specify different tab stops, and then type @kbd{C-c C-c} to make those
-new tab stops take effect. @code{edit-tab-stops} records which buffer
-was current when you invoked it, and stores the tab stops back in that
-buffer; normally all buffers share the same tab stops and changing them
-in one buffer affects all, but if you happen to make
+new tab stops take effect. The buffer uses Overwrite mode
+(@pxref{Minor Modes}). @code{edit-tab-stops} records which buffer was
+current when you invoked it, and stores the tab stops back in that
+buffer; normally all buffers share the same tab stops and changing
+them in one buffer affects all, but if you happen to make
@code{tab-stop-list} local in one buffer then @code{edit-tab-stops} in
that buffer will edit the local settings.
@findex untabify
There are also commands to convert tabs to spaces or vice versa, always
preserving the columns of all nonblank text. @kbd{M-x tabify} scans the
-region for sequences of spaces, and converts sequences of at least three
+region for sequences of spaces, and converts sequences of at least two
spaces to tabs if that can be done without changing indentation. @kbd{M-x
untabify} changes all tabs in the region to appropriate numbers of spaces.