/* System description header file for Darwin (Mac OS X).
- Copyright (C) 2001, 2002, 2003, 2004, 2005,
- 2006, 2007 Free Software Foundation, Inc.
+ Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+ 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GNU Emacs.
-GNU Emacs is free software; you can redistribute it and/or modify
+GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3, or (at your option)
-any later version.
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GNU Emacs; see the file COPYING. If not, write to
-the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA. */
+along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */
/*
* Define all the symbols that apply correctly.
*/
-/* #define UNIPLUS */
-/* #define USG5 */
-/* #define USG */
-/* #define HPUX */
-/* #define UMAX */
-/* #define BSD4_1 */
#define BSD4_2
/* BSD4_3 and BSD4_4 are already defined in sys/param.h */
-/* #define BSD4_3 */
-/* #define BSD4_4 */
#define BSD_SYSTEM
-/* #define VMS */
-#if 0 /* Don't define DARWIN on Mac OS X because CoreFoundation.h uses
- it to distinguish Mac OS X from bare Darwin. */
-#ifndef DARWIN
-#define DARWIN 1
-#endif
-#endif
+/* More specific than the above two. We cannot use __APPLE__ as this
+ may not be defined on non-OSX Darwin, and we cannot define DARWIN
+ here because Panther and lower CoreFoundation.h uses DARWIN to
+ distinguish OS X from pure Darwin. */
-/* MAC_OS is used to conditionally compile code common to both MAC_OS8
- and MAC_OSX. */
-#ifdef MAC_OSX
-#ifdef HAVE_CARBON
-#define MAC_OS
-/* We need a little extra space, see ../../lisp/loadup.el. */
-#define SYSTEM_PURESIZE_EXTRA 30000
+#define DARWIN_OS
-/* XXX The MULTI_KBOARD support does not work yet on this platform. */
-#undef MULTI_KBOARD
-
-#endif
-#endif
/* SYSTEM_TYPE should indicate the kind of system you are using.
It sets the Lisp variable system-type. */
#define SYSTEM_TYPE "darwin"
-/* NOMULTIPLEJOBS should be defined if your system's shell
- does not have "job control" (the ability to stop a program,
- run some other program, then continue the first one). */
-
-/* #define NOMULTIPLEJOBS */
-
/* Emacs can read input using SIGIO and buffering characters itself,
or using CBREAK mode and making C-g cause SIGINT.
The choice is controlled by the variable interrupt_input.
*/
#define HAVE_TERMIOS
-/* #define HAVE_TERMIO */
#define NO_TERMIO
*/
#define MIN_PTY_KERNEL_VERSION '7'
-/*
- * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- * The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
/* Define this symbol if your system has the functions bcopy, etc. */
#define BSTRING
-/* subprocesses should be defined if you want to
- have code for asynchronous subprocesses
- (as used in M-x compile and M-x shell).
- This is generally OS dependent, and not supported
- under most USG systems. */
-
-#define subprocesses
-
-/* If your system uses COFF (Common Object File Format) then define the
- preprocessor symbol "COFF". */
-
-/* #define COFF */
-
/* define MAIL_USE_FLOCK if the mailer uses flock
to interlock access to /usr/spool/mail/$USER.
The alternative is that a lock file named
#define CLASH_DETECTION
-/* Define this if your operating system declares signal handlers to
- have a type other than the usual. `The usual' is `void' for ANSI C
- systems (i.e. when the __STDC__ macro is defined), and `int' for
- pre-ANSI systems. If you're using GCC on an older system, __STDC__
- will be defined, but the system's include files will still say that
- signal returns int or whatever; in situations like that, define
- this to be what the system's include files want. */
-/* #define SIGTYPE int */
-
-/* If the character used to separate elements of the executable path
- is not ':', #define this to be the appropriate character constant. */
-/* #define SEPCHAR ':' */
-
-/* Define this if the system can use mmap for buffer text allocation. */
-/* #define USE_MMAP_FOR_BUFFERS 1 */
-
-/* ============================================================ */
-
-/* Here, add any special hacks needed
- to make Emacs work on this system. For example,
- you might define certain system call names that don't
- exist on your system, or that do different things on
- your system and must be used only through an encapsulation
- (Which you should place, by convention, in sysdep.c). */
-
-/* Some compilers tend to put everything declared static
- into the initialized data area, which becomes pure after dumping Emacs.
- On these systems, you must #define static as nothing to foil this.
- Note that emacs carefully avoids static vars inside functions. */
-
-/* #define static */
-
-/* If the system's imake configuration file defines `NeedWidePrototypes'
- as `NO', we must define NARROWPROTO manually. Such a define is
- generated in the Makefile generated by `xmkmf'. If we don't
- define NARROWPROTO, we will see the wrong function prototypes
- for X functions taking float or double parameters. */
-
-/* #define NARROWPROTO 1 */
-
-/* ============================================================ */
-
-/* After adding support for a new system, modify the large case
- statement in the `configure' script to recognize reasonable
- configuration names, and add a description of the system to
- `etc/MACHINES'.
-
- If you've just fixed a problem in an existing configuration file,
- you should also check `etc/MACHINES' to make sure its descriptions
- of known problems in that configuration should be updated. */
-
-
/* Avoid the use of the name init_process (process.c) because it is
also the name of a Mach system call. */
#define init_process emacs_init_process
/* Define HAVE_SOCKETS if system supports 4.2-compatible sockets. */
#define HAVE_SOCKETS
-/* In Carbon, asynchronous I/O (using SIGIO) can't be used for window
- events because they don't come from sockets, even though it works
- fine on tty's. */
-#ifdef HAVE_CARBON
-#define NO_SOCK_SIGIO
-#endif
-
-/* Extra initialization calls in main for Mac OS X system type. */
-#ifdef HAVE_CARBON
-#define SYMS_SYSTEM syms_of_mac()
-#endif
-
/* Definitions for how to dump. Copied from nextstep.h. */
#define UNEXEC unexmacosx.o
/* start_of_text isn't actually used, so make it compile without error. */
#define TEXT_START (0)
-/* This seems to be right for end_of_text, but it may not be used anyway. */
-#define TEXT_END get_etext()
-
-/* This seems to be right for end_of_data, but it may not be used anyway. */
-#define DATA_END get_edata()
-
/* Definitions for how to compile & link. */
-/* Indicate that we are compiling for Mac OS X. */
-#define C_SWITCH_SYSTEM -fpascal-strings -DMAC_OSX
+#ifdef HAVE_NS
+#define LIBS_NSGUI -framework AppKit
+#define SYSTEM_PURESIZE_EXTRA 200000
+#define HEADERPAD_EXTRA 6C8
+#else /* !HAVE_NS */
+#define LIBS_NSGUI
+#define HEADERPAD_EXTRA 690
+#endif /* !HAVE_NS */
-/* Link in the Carbon lib. */
-#ifdef HAVE_CARBON
-#define LIBS_CARBON -framework Carbon -framework QuickTime
-#else
-#define LIBS_CARBON
-#endif
+/* On Darwin, res_init appears not to be useful: see bug#562 and
+ http://lists.gnu.org/archive/html/emacs-devel/2007-11/msg01467.html */
+
+#undef HAVE_RES_INIT
+#undef HAVE_LIBRESOLV
/* The -headerpad option tells ld (see man page) to leave room at the
end of the header for adding load commands. Needed for dumping.
0x690 is the total size of 30 segment load commands (at 56
- each). */
-#define LD_SWITCH_SYSTEM_TEMACS -prebind LIBS_CARBON -Xlinker -headerpad -Xlinker 690
+ each); under Cocoa 31 commands are required. */
+#define LD_SWITCH_SYSTEM_TEMACS -prebind LIBS_NSGUI -Xlinker -headerpad -Xlinker HEADERPAD_EXTRA
#define C_SWITCH_SYSTEM_TEMACS -Dtemacs
+#ifdef temacs
+#define malloc unexec_malloc
+#define realloc unexec_realloc
+#define free unexec_free
+/* Don't use posix_memalign because it is not compatible with
+ unexmacosx.c. */
+#undef HAVE_POSIX_MEMALIGN
+#endif
+
/* The ncurses library has been moved out of the System framework in
Mac OS X 10.2. So if ./configure detects it, set the command-line
option to use it. */
/* Adding -lm confuses the dynamic linker, so omit it. */
#define LIB_MATH
-/* Tell src/Makefile.in to create files in the Mac OS X application
- bundle mac/Emacs.app. */
-#ifdef HAVE_CARBON
-#define OTHER_FILES macosx-app
-#endif
-
-
/* Define the following so emacs symbols will not conflict with those
in the System framework. Otherwise -prebind will not work. */
/* Do not define matherr in floatfns.c. */
#define NO_MATHERR
-
/* The following solves the problem that Emacs hangs when evaluating
(make-comint "test0" "/nodir/nofile" nil "") when /nodir/nofile
- does not exist. */
+ does not exist. Also, setsid is not allowed in the vfork child's
+ context as of Darwin 9/Mac OS X 10.5. */
#undef HAVE_WORKING_VFORK
#define vfork fork
ioctl TIOCSCTTY. */
#define DONT_REOPEN_PTY
-#ifdef temacs
-#define malloc unexec_malloc
-#define realloc unexec_realloc
-#define free unexec_free
-#endif
-
/* This makes create_process in process.c save and restore signal
handlers correctly. Suggested by Nozomu Ando.*/
#define POSIX_SIGNALS
-/* Reroute calls to SELECT to the version defined in mac.c to fix the
- problem of Emacs requiring an extra return to be typed to start
- working when started from the command line. */
-#if defined (HAVE_CARBON) && (defined (emacs) || defined (temacs))
-#define select sys_select
-#endif
-
/* Use the GC_MAKE_GCPROS_NOOPS (see lisp.h) method for marking the
stack. */
#define GC_MARK_STACK GC_MAKE_GCPROS_NOOPS