;;; elp.el --- Emacs Lisp Profiler
-;; Copyright (C) 1994 Free Software Foundation, Inc.
+;; Copyright (C) 1994,1995,1997,1998 Free Software Foundation, Inc.
-;; Author: 1994 Barry A. Warsaw <bwarsaw@cnri.reston.va.us>
-;; Maintainer: tools-help@anthem.nlm.nih.gov
+;; Author: 1994-1998 Barry A. Warsaw
+;; Maintainer: tools-help@python.org
;; Created: 26-Feb-1994
-;; Version: 2.23
-;; Last Modified: 1994/12/28 22:39:31
-;; Keywords: Emacs Lisp Profile Timing
+;; Version: 3.2
+;; Keywords: debugging lisp tools
;; This file is part of GNU Emacs.
;; to the list of symbols, then do a M-x elp-instrument-list. This
;; hacks those functions so that profiling information is recorded
;; whenever they are called. To print out the current results, use
-;; M-x elp-results. With elp-reset-after-results set to non-nil,
-;; profiling information will be reset whenever the results are
-;; displayed. You can also reset all profiling info at any time with
-;; M-x elp-reset-all.
+;; M-x elp-results. If you want output to go to standard-output
+;; instead of a separate buffer, setq elp-use-standard-output to
+;; non-nil. With elp-reset-after-results set to non-nil, profiling
+;; information will be reset whenever the results are displayed. You
+;; can also reset all profiling info at any time with M-x
+;; elp-reset-all.
;;
;; You can also instrument all functions in a package, provided that
;; the package follows the GNU coding standard of a common textural
;; elp-restore-function. The other instrument, restore, and reset
;; functions are provided for symmetry.
-;; Note that there are plenty of factors that could make the times
-;; reported unreliable, including the accuracy and granularity of your
-;; system clock, and the overhead spent in lisp calculating and
-;; recording the intervals. The latter I figure is pretty constant
-;; so, while the times may not be entirely accurate, I think they'll
-;; give you a good feel for the relative amount of work spent in the
-;; various lisp routines you are profiling. Note further that times
-;; are calculated using wall-clock time, so other system load will
-;; affect accuracy too.
-
;; Here is a list of variable you can use to customize elp:
;; elp-function-list
;; elp-reset-after-results
;; give you a good feel for the relative amount of work spent in the
;; various lisp routines you are profiling. Note further that times
;; are calculated using wall-clock time, so other system load will
-;; affect accuracy too. You cannot profile anything longer than ~18
-;; hours since I throw away the most significant 16 bits of seconds
-;; returned by current-time: 2^16 == 65536 seconds == ~1092 minutes ==
-;; ~18 hours. I doubt you will ever want to profile stuff on the
-;; order of 18 hours anyway.
+;; affect accuracy too.
;;; Background:
-;; This program is based on the only two existing Emacs Lisp profilers
-;; that I'm aware of, Boaz Ben-Zvi's profile.el, and Root Boy Jim's
-;; profiler.el. Both were written for Emacs 18 and both were pretty
-;; good first shots at profiling, but I found that they didn't provide
-;; the functionality or interface that I wanted. So I wrote this.
-;; I've tested elp in GNU Emacs 19 and in GNU XEmacs. There's no
-;; point in even trying to make this work with Emacs 18.
+;; This program was inspired by the only two existing Emacs Lisp
+;; profilers that I'm aware of, Boaz Ben-Zvi's profile.el, and Root
+;; Boy Jim's profiler.el. Both were written for Emacs 18 and both were
+;; pretty good first shots at profiling, but I found that they didn't
+;; provide the functionality or interface that I wanted, so I wrote
+;; this. I've tested elp in XEmacs 19 and Emacs 19. There's no point
+;; in even trying to make this work with Emacs 18.
;; Unlike previous profilers, elp uses Emacs 19's built-in function
;; current-time to return interval times. This obviates the need for
;; both an external C program and Emacs processes to communicate with
;; such a program, and thus simplifies the package as a whole.
+;; TBD:
+;; Make this act like a real profiler, so that it records time spent
+;; in all branches of execution.
+
;;; Code:
\f
-;; start user configuration variables
+;; start of user configuration variables
;; vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
-(defvar elp-function-list nil
- "*List of function to profile.")
+(defgroup elp nil
+ "Emacs Lisp Profiler"
+ :group 'lisp)
-(defvar elp-reset-after-results t
+(defcustom elp-function-list nil
+ "*List of functions to profile.
+Used by the command `elp-instrument-list'."
+ :type '(repeat function)
+ :group 'elp)
+
+(defcustom elp-reset-after-results t
"*Non-nil means reset all profiling info after results are displayed.
-Results are displayed with the `elp-results' command.")
+Results are displayed with the `elp-results' command."
+ :type 'boolean
+ :group 'elp)
-(defvar elp-sort-by-function nil
+(defcustom elp-sort-by-function 'elp-sort-by-total-time
"*Non-nil specifies elp results sorting function.
These functions are currently available:
\"element of LIST\" is really a 4 element vector where element 0 is
the call count, element 1 is the total time spent in the function,
element 2 is the average time spent in the function, and element 3 is
-the symbol's name string.")
+the symbol's name string."
+ :type 'function
+ :group 'elp)
-(defvar elp-report-limit nil
+(defcustom elp-report-limit 1
"*Prevents some functions from being displayed in the results buffer.
If a number, no function that has been called fewer than that number
of times will be displayed in the output buffer. If nil, all
-functions will be displayed.")
+functions will be displayed."
+ :type '(choice integer
+ (const :tag "Show All" nil))
+ :group 'elp)
+
+(defcustom elp-use-standard-output nil
+ "*Non-nil says to output to `standard-output' instead of a buffer."
+ :type 'boolean
+ :group 'elp)
+
+(defcustom elp-recycle-buffers-p t
+ "*Nil says to not recycle the `elp-results-buffer'.
+In other words, a new unique buffer is create every time you run
+\\[elp-results]."
+ :type 'boolean
+ :group 'elp)
;; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-;; end user configuration variables
+;; end of user configuration variables
\f
-(defconst elp-version "2.23"
+(defconst elp-version "3.2"
"ELP version number.")
-(defconst elp-help-address "tools-help@anthem.nlm.nih.gov"
+(defconst elp-help-address "tools-help@python.org"
"Address accepting submissions of bug reports and questions.")
(defvar elp-results-buffer "*ELP Profiling Results*"
"Instrument FUNSYM for profiling.
FUNSYM must be a symbol of a defined function."
(interactive "aFunction to instrument: ")
- ;; TBD what should we do if the function is already instrumented???
+ ;; restore the function. this is necessary to avoid infinite
+ ;; recursion of already instrumented functions (i.e. elp-wrapper
+ ;; calling elp-wrapper ad infinitum). it is better to simply
+ ;; restore the function than to throw an error. this will work
+ ;; properly in the face of eval-defun because if the function was
+ ;; redefined, only the timer info will be nil'd out since
+ ;; elp-restore-function is smart enough not to trash the new
+ ;; definition.
+ (elp-restore-function funsym)
(let* ((funguts (symbol-function funsym))
(infovec (vector 0 0 funguts))
(newguts '(lambda (&rest args))))
;; we cannot profile macros
(and (eq (car-safe funguts) 'macro)
- (error "ELP cannot profile macro %s" funsym))
+ (error "ELP cannot profile macro: %s" funsym))
+ ;; TBD: at some point it might be better to load the autoloaded
+ ;; function instead of throwing an error. if we do this, then we
+ ;; probably want elp-instrument-package to be updated with the
+ ;; newly loaded list of functions. i'm not sure it's smart to do
+ ;; the autoload here, since that could have side effects, and
+ ;; elp-instrument-function is similar (in my mind) to defun-ish
+ ;; type functionality (i.e. it shouldn't execute the function).
+ (and (eq (car-safe funguts) 'autoload)
+ (error "ELP cannot profile autoloaded function: %s" funsym))
;; put rest of newguts together
(if (commandp funsym)
(setq newguts (append newguts '((interactive)))))
;; because its possible the function got un-instrumented due to
;; circumstances beyond our control. Also, check to make sure
;; that the current function symbol points to elp-wrapper. If
- ;; not, then the user probably did an eval-defun while the
- ;; function was instrumented and we don't want to destroy the new
- ;; definition.
+ ;; not, then the user probably did an eval-defun, or loaded a
+ ;; byte-compiled version, while the function was instrumented and
+ ;; we don't want to destroy the new definition. can it ever be
+ ;; the case that a lisp function can be compiled instrumented?
(and info
+ (functionp funsym)
+ (not (compiled-function-p (symbol-function funsym)))
(assq 'elp-wrapper (symbol-function funsym))
(fset funsym (aref info 2)))))
\\[elp-instrument-package] RET elp- RET"
(interactive "sPrefix of package to instrument: ")
(elp-instrument-list
- (mapcar 'intern (all-completions prefix obarray
- (function
- (lambda (sym)
- (and (fboundp sym)
- (not (eq (car-safe
- (symbol-function sym))
- 'macro)))))))))
+ (mapcar
+ 'intern
+ (all-completions
+ prefix obarray
+ (function
+ (lambda (sym)
+ (and (fboundp sym)
+ (not (memq (car-safe (symbol-function sym)) '(autoload macro))))
+ ))
+ ))))
(defun elp-restore-list (&optional list)
"Restore the original definitions for all functions in `elp-function-list'.
elp-record-p t))
\f
-(defsubst elp-get-time ()
- ;; get current time in seconds and microseconds. I throw away the
- ;; most significant 16 bits of seconds since I doubt we'll ever want
- ;; to profile lisp on the order of 18 hours. See notes at top of file.
- (let ((now (current-time)))
- (+ (float (nth 1 now)) (/ (float (nth 2 now)) 1000000.0))))
+(defsubst elp-elapsed-time (start end)
+ (+ (* (- (car end) (car start)) 65536.0)
+ (- (car (cdr end)) (car (cdr start)))
+ (/ (- (car (cdr (cdr end))) (car (cdr (cdr start)))) 1000000.0)))
(defun elp-wrapper (funsym interactive-p args)
"This function has been instrumented for profiling by the ELP.
(call-interactively func)
(apply func args)))
;; we are recording times
- (let ((enter-time (elp-get-time)))
+ (let (enter-time exit-time)
;; increment the call-counter
(aset info 0 (1+ (aref info 0)))
;; now call the old symbol function, checking to see if it
;; should be called interactively. make sure we return the
;; correct value
- (setq result
- (if interactive-p
- (call-interactively func)
- (apply func args)))
+ (if interactive-p
+ (setq enter-time (current-time)
+ result (call-interactively func)
+ exit-time (current-time))
+ (setq enter-time (current-time)
+ result (apply func args)
+ exit-time (current-time)))
;; calculate total time in function
- (aset info 1 (+ (aref info 1) (- (elp-get-time) enter-time)))
+ (aset info 1 (+ (aref info 1) (elp-elapsed-time enter-time exit-time)))
))
;; turn off recording if this is the master function
(if (and elp-master
displayed."
(interactive)
(let ((curbuf (current-buffer))
- (resultsbuf (get-buffer-create elp-results-buffer)))
+ (resultsbuf (if elp-recycle-buffers-p
+ (get-buffer-create elp-results-buffer)
+ (generate-new-buffer elp-results-buffer))))
(set-buffer resultsbuf)
(erase-buffer)
(beginning-of-buffer)
;; now pop up results buffer
(set-buffer curbuf)
(pop-to-buffer resultsbuf)
+ ;; copy results to standard-output?
+ (if (or elp-use-standard-output noninteractive)
+ (princ (buffer-substring (point-min) (point-max))))
;; reset profiling info if desired
(and elp-reset-after-results
(elp-reset-all))))
'(elp-report-limit
elp-reset-after-results
elp-sort-by-function))))
-
\f
(provide 'elp)