@echo off\r
rem ----------------------------------------------------------------------\r
rem Configuration script for MSDOS\r
-rem Copyright (C) 1994 Free Software Foundation, Inc.\r
+rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003\r
+rem 2004, 2005, 2006, 2007 Free Software Foundation, Inc.\r
\r
rem This file is part of GNU Emacs.\r
\r
rem GNU Emacs is free software; you can redistribute it and/or modify\r
rem it under the terms of the GNU General Public License as published by\r
-rem the Free Software Foundation; either version 2, or (at your option)\r
+rem the Free Software Foundation; either version 3, or (at your option)\r
rem any later version.\r
\r
rem GNU Emacs is distributed in the hope that it will be useful,\r
rem GNU General Public License for more details.\r
\r
rem You should have received a copy of the GNU General Public License\r
-rem along with GNU Emacs; see the file COPYING. If not, write to\r
-rem the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.\r
+rem along with GNU Emacs; see the file COPYING. If not, write to the\r
+rem Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,\r
+rem Boston, MA 02110-1301, USA.\r
rem ----------------------------------------------------------------------\r
rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
rem\r
rem + msdos version 3 or better.\r
-rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r
+rem + DJGPP version 1.12maint1 or later (version 2.03 or later recommended).\r
rem + make utility that allows breaking of the 128 chars limit on\r
rem command lines. ndmake (as of version 4.5) won't work due to a\r
-rem line length limit. The make that comes with djgpp does work.\r
+rem line length limit. The make that comes with DJGPP does work.\r
rem + rm and mv (from GNU file utilities).\r
rem + sed (you can use the port that comes with DJGPP).\r
rem\r
-rem You should be able to get all the above utilities from any SimTel\r
-rem repository, e.g. ftp.coast.net, in the directories\r
-rem "SimTel/vendors/djgpp" and "SimTel/vendors/gnu/gnuish/dos_only". As\r
-rem usual, please use your local mirroring site to reduce trans-Atlantic\r
-rem traffic.\r
+rem You should be able to get all the above utilities from the DJGPP FTP\r
+rem site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".\r
rem ----------------------------------------------------------------------\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+if "%1" == "" goto usage\r
+rem ----------------------------------------------------------------------\r
+rem See if their environment is large enough. We need 28 bytes.\r
+set $foo$=789012345678901234567\r
+if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r
+set $foo$=\r
:again\r
if "%1" == "" goto usage\r
if "%1" == "--with-x" goto withx\r
Echo Checking whether 'mv' is available...\r
rm -f junk.1 junk.2\r
echo foo >junk.1\r
-mv junk.1 junk.2\r
+mv junk.1 ./junk.2\r
If Exist junk.2 Goto mvOk\r
Echo To configure 'Emacs' you need to have 'mv'!\r
rm -f junk.1\r
rm -f junk.c\r
Goto End\r
:gccOk\r
-rm -f junk.c junk.o\r
+rm -f junk.c junk.o junk junk.exe\r
Echo Checking what version of DJGPP is installed...\r
If Not "%DJGPP%" == "" goto djgppOk\r
Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
echo {return 0;} >>junk.c\r
echo #endif >>junk.c\r
echo #endif >>junk.c\r
-gcc -o junk.exe junk.c\r
+gcc -o junk junk.c\r
+if not exist junk.exe coff2exe junk\r
junk\r
If ErrorLevel 10 Goto go32Ok\r
rm -f junk.c junk junk.exe\r
set djgpp_ver=1\r
If ErrorLevel 20 set djgpp_ver=2\r
rm -f junk.c junk junk.exe\r
+rem The v1.x build does not need djecho\r
+if "%DJGPP_VER%" == "1" Goto djechoOk\r
+rem DJECHO is used by the top-level Makefile in the v2.x build\r
+Echo Checking whether 'djecho' is available...\r
+redir -o Nul -eo djecho -o junk.$$$ foo\r
+If Exist junk.$$$ Goto djechoOk\r
+Echo To build 'Emacs' you need the 'djecho.exe' program!\r
+Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r
+Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.\r
+Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r
+Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r
+Echo Then run CONFIG.BAT again with the same arguments you did now.\r
+Goto End\r
+:djechoOk\r
+rm -f junk.$$$\r
Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
Rem ----------------------------------------------------------------------\r
Echo Configuring the source directory...\r
cd src\r
\r
-rem Create "paths.h"\r
-sed -f ../msdos/sed4.inp <paths.in >paths.tmp\r
-update paths.tmp paths.h >nul\r
-rm -f paths.tmp\r
+rem Create "epaths.h"\r
+sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r
+update epaths.tmp epaths.h >nul\r
+rm -f epaths.tmp\r
\r
rem Create "config.h"\r
rm -f config.h2 config.tmp\r
-cp config.in config.tmp\r
+sed -e '' config.in > config.tmp\r
if "%X11%" == "" goto src4\r
sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
:src4\r
+if "%DJGPP_VER%" == "2" Goto src41\r
sed -f ../msdos/sed2.inp <config.tmp >config.h2\r
+goto src42\r
+:src41\r
+sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r
+:src42\r
+Rem See if DECL_ALIGN can be supported with this GCC\r
+rm -f junk.c junk.o junk junk.exe\r
+echo struct { int i; char *p; } __attribute__((__aligned__(8))) foo; >junk.c\r
+rem Two percent signs because it is a special character for COMMAND.COM/CMD\r
+rem Filter thru Sed because "&" is special for CMD.EXE\r
+echo int main(void) { return (unsigned long)"&"foo %% 8; } | sed "s/.&./\&/" >>junk.c\r
+gcc -o junk junk.c\r
+if not exist junk.exe coff2exe junk\r
+junk\r
+If Not ErrorLevel 1 Goto alignOk\r
+Echo WARNING: Your GCC does not support 8-byte aligned variables.\r
+Echo WARNING: Therefore Emacs cannot support buffers larger than 128MB.\r
+rem The following line disables DECL_ALIGN which in turn disables USE_LSB_TAG\r
+rem For details see lisp.h where it defines USE_LSB_TAG\r
+echo #define NO_DECL_ALIGN >>config.h2\r
+:alignOk\r
+rm -f junk.c junk junk.exe\r
update config.h2 config.h >nul\r
rm -f config.tmp config.h2\r
\r
if exist dir.h ren dir.h vmsdir.h\r
\r
rem Create "makefile" from "makefile.in".\r
-rm -f makefile junk.c\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c\r
+rm -f Makefile junk.c\r
+sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c\r
If "%DJGPP_VER%" == "1" Goto mfV1\r
-gcc -E junk.c | sed -f ../msdos/sed1v2.inp >makefile\r
+gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
goto mfDone\r
:mfV1\r
-gcc -E junk.c | sed -f ../msdos/sed1.inp >makefile\r
+gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile\r
:mfDone\r
rm -f junk.c\r
\r
if "%X11%" == "" goto src5\r
-mv makefile makefile.tmp\r
-sed -f ../msdos/sed1x.inp <makefile.tmp >makefile\r
+mv Makefile makefile.tmp\r
+sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:src5\r
\r
if "%nodebug%" == "" goto src6\r
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
-sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >makefile\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
+sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:src6\r
cd ..\r
Echo Configuring the library source directory...\r
cd lib-src\r
rem Create "makefile" from "makefile.in".\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c\r
-gcc -E -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
+sed -e "1,/== start of cpp stuff ==/s@^#[ ].*$@@" <Makefile.in >junk.c\r
+gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
If "%DJGPP_VER%" == "2" goto libsrc-v2\r
-sed -f ../msdos/sed3.inp <makefile.new >makefile\r
+sed -f ../msdos/sed3.inp <makefile.new >Makefile\r
Goto libsrc2\r
:libsrc-v2\r
-sed -f ../msdos/sed3v2.inp <makefile.new >makefile\r
+sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r
:libsrc2\r
rm -f makefile.new junk.c\r
if "%nodebug%" == "" goto libsrc3\r
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
-sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >makefile\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
+sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:libsrc3\r
cd ..\r
if "%X11%" == "" goto oldx1\r
Echo Configuring the oldxmenu directory...\r
cd oldxmenu\r
-sed -f ../msdos/sed5x.inp <makefile.in >makefile\r
+sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
if "%nodebug%" == "" goto oldx2\r
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
-mv -f makefile.tmp makefile\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
+mv -f makefile.tmp Makefile\r
:oldx2\r
cd ..\r
:oldx1\r
rem ----------------------------------------------------------------------\r
+Echo Configuring the manual directory...\r
+cd man\r
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+Echo Configuring the ELisp manual directory...\r
+cd lispref\r
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+Echo Configuring the ELisp Introduction manual directory...\r
+Rem The two variants for the line below is for when the shell\r
+Rem supports long file names but DJGPP does not\r
+if exist lispintro\Makefile.in cd lispintro\r
+if exist lispintr\Makefile.in cd lispintr\r
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+Echo Configuring the lisp directory...\r
+cd lisp\r
+sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+If not Exist leim\quail\latin-pre.el goto maindir\r
+Echo Configuring the leim directory...\r
+cd leim\r
+sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+:maindir\r
Echo Configuring the main directory...\r
-If "%DJGPP_VER%" == "2" copy msdos\mainmake.v2 makefile >nul\r
-If "%DJGPP_VER%" == "1" copy msdos\mainmake makefile >nul\r
+If "%DJGPP_VER%" == "1" goto mainv1\r
+Echo Looking for the GDB init file...\r
+If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
+If Exist src\_gdbinit goto gdbinitOk\r
+Echo ERROR:\r
+Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
+Echo the Emacs distribution, but was probably renamed to some other\r
+Echo name without the leading dot when you untarred the archive.\r
+Echo It should be in the "src/" subdirectory. Please make sure this\r
+Echo file exists and is called "_gdbinit" with a leading underscore.\r
+Echo Then run CONFIG.BAT again with the same arguments you did now.\r
+goto End\r
+:gdbinitOk\r
+Echo Looking for the GDB init file...found\r
+copy msdos\mainmake.v2 Makefile >nul\r
+:mainv1\r
+If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r
rem ----------------------------------------------------------------------\r
+goto End\r
+:SmallEnv\r
+echo Your environment size is too small. Please enlarge it and run me again.\r
+echo For example, type "command.com /e:2048" to have 2048 bytes available.\r
+set $foo$=\r
:end\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+\r
+goto skipArchTag\r
+ arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33\r
+:skipArchTag\r