Merge from emacs-24; up to 2012-11-24T16:58:43Z!cyd@gnu.org

[gnu-emacs] / doc / misc / mh-e.texi

diff --git a/doc/misc/mh-e.texi b/doc/misc/mh-e.texi
index e419ba05055d3ea04c9e05294d11410e4d6ce75b..06ab93f91c7df38f962a5cba706a49e5308df91a 100644 (file)
--- a/doc/misc/mh-e.texi
+++ b/doc/misc/mh-e.texi
@@ -206,7 +206,7 @@ History of MH-E
 This manual introduces another interface to the MH mail system that is
 accessible through the GNU Emacs editor, namely, @emph{MH-E}. MH-E is
 easy to use. I don't assume that you know GNU Emacs or even MH at this
 This manual introduces another interface to the MH mail system that is
 accessible through the GNU Emacs editor, namely, @emph{MH-E}. MH-E is
 easy to use. I don't assume that you know GNU Emacs or even MH at this

-point, since I didn't know either of them when I discovered MH-E.
+point, since I didn't know either of them when I discovered MH-E@.

 However, MH-E was the tip of the iceberg, and I discovered more and
 more niceties about GNU Emacs and MH@. Now I'm fully hooked on both of
 them.
 However, MH-E was the tip of the iceberg, and I discovered more and
 more niceties about GNU Emacs and MH@. Now I'm fully hooked on both of
 them.


@@ -540,7 +540,7 @@ installing MH-E.
 If the @code{mh-version} command displays @samp{No MH variant
 detected}@footnote{In very old versions of MH-E, you may get the error
 message, @samp{Cannot find the commands `inc' and `mhl' and the file
 If the @code{mh-version} command displays @samp{No MH variant
 detected}@footnote{In very old versions of MH-E, you may get the error
 message, @samp{Cannot find the commands `inc' and `mhl' and the file

-`components'} if MH-E can't find MH. In this case, you need to update
+`components'} if MH-E can't find MH@. In this case, you need to update

 MH-E, and you may need to install MH too. However, newer versions of
 MH-E are better at finding MH if it is on your system.}, then you need
 to install MH or tell MH-E where to find MH.
 MH-E, and you may need to install MH too. However, newer versions of
 MH-E are better at finding MH if it is on your system.}, then you need
 to install MH or tell MH-E where to find MH.


@@ -550,11 +550,11 @@ to install MH or tell MH-E where to find MH.
 @cindex GNU mailutils MH
 
 If you don't have MH on your system already, you must install a
 @cindex GNU mailutils MH
 
 If you don't have MH on your system already, you must install a

-variant of MH. The Debian mh-e package does this for you automatically
+variant of MH@. The Debian mh-e package does this for you automatically

 (@pxref{Getting MH-E}). Most people use
 @uref{http://www.nongnu.org/nmh/, nmh}, but you may be interested in
 trying out @uref{http://www.gnu.org/software/mailutils/, GNU mailutils
 (@pxref{Getting MH-E}). Most people use
 @uref{http://www.nongnu.org/nmh/, nmh}, but you may be interested in
 trying out @uref{http://www.gnu.org/software/mailutils/, GNU mailutils

-MH}, which supports IMAP. Your GNU/Linux distribution probably has
+MH}, which supports IMAP@. Your GNU/Linux distribution probably has

 packages for both of these.
 
 @cindex @command{install-mh}
 packages for both of these.
 
 @cindex @command{install-mh}


@@ -671,7 +671,7 @@ chapter for a mapping between default key bindings and function
 names.}. When you're done, you'll be able to send, read, and file
 mail, which is all that a lot of people ever do. But if you're the
 curious or adventurous type, read the rest of the manual to be able to
 names.}. When you're done, you'll be able to send, read, and file
 mail, which is all that a lot of people ever do. But if you're the
 curious or adventurous type, read the rest of the manual to be able to

-use all the features of MH-E. I suggest you read this chapter first to
+use all the features of MH-E@. I suggest you read this chapter first to

 get the big picture, and then you can read the manual as you wish.
 
 @menu
 get the big picture, and then you can read the manual as you wish.
 
 @menu


@@ -1572,7 +1572,7 @@ command incorporates your mail and creates a buffer called
 @samp{+inbox} in MH-Folder mode. The command @kbd{M-x mh-rmail} shows
 you only new mail, not mail you have already read@footnote{If you want
 to see your old mail as well, use @kbd{F r} to pull all your messages
 @samp{+inbox} in MH-Folder mode. The command @kbd{M-x mh-rmail} shows
 you only new mail, not mail you have already read@footnote{If you want
 to see your old mail as well, use @kbd{F r} to pull all your messages

-into MH-E. Or, give a prefix argument to @code{mh-rmail} so it will
+into MH-E@. Or, give a prefix argument to @code{mh-rmail} so it will

 prompt you for folder to visit like @kbd{F v} (for example, @kbd{C-u
 M-x mh-rmail @key{RET} bob @key{RET}}). @xref{Folders}.}.
 
 prompt you for folder to visit like @kbd{F v} (for example, @kbd{C-u
 M-x mh-rmail @key{RET} bob @key{RET}}). @xref{Folders}.}.
 


@@ -2456,7 +2456,7 @@ that they do not really appear like an attachment at all to the
 reader. Most of the time, this is desirable, so by default MH-E
 suppresses the buttons for inline attachments. On the other hand, you
 may receive code or HTML which the sender has added to his message as
 reader. Most of the time, this is desirable, so by default MH-E
 suppresses the buttons for inline attachments. On the other hand, you
 may receive code or HTML which the sender has added to his message as

-inline attachments so that you can read them in MH-E. In this case, it
+inline attachments so that you can read them in MH-E@. In this case, it

 is useful to see the buttons so that you know you don't have to cut
 and paste the code into a file; you can simply save the attachment. If
 you want to make the buttons visible for inline attachments, you can
 is useful to see the buttons so that you know you don't have to cut
 and paste the code into a file; you can simply save the attachment. If
 you want to make the buttons visible for inline attachments, you can


@@ -3222,7 +3222,7 @@ original configuration is displayed.
 @cindex menu, @samp{Message}
 @cindex using folders
 
 @cindex menu, @samp{Message}
 @cindex using folders
 

-This chapter discusses the things you can do with folders within MH-E.
+This chapter discusses the things you can do with folders within MH-E@.

 The commands in this chapter are also found in the @samp{Folder} and
 @samp{Message} menus.
 
 The commands in this chapter are also found in the @samp{Folder} and
 @samp{Message} menus.
 


@@ -5705,7 +5705,7 @@ buffer and delete the draft message. Use the command @kbd{C-x k}
 
 @cindex aliases
 
 
 @cindex aliases
 

-MH aliases are used in the same way in MH-E as they are in MH. Any
+MH aliases are used in the same way in MH-E as they are in MH@. Any

 alias listed as a recipient will be expanded when the message is sent.
 This chapter discusses other things you can do with aliases in MH-E.
 
 alias listed as a recipient will be expanded when the message is sent.
 This chapter discusses other things you can do with aliases in MH-E.
 


@@ -5816,7 +5816,7 @@ Otherwise, you can complete aliases in the header of the draft with
 
 @vindex mh-alias-completion-ignore-case-flag
 
 
 @vindex mh-alias-completion-ignore-case-flag
 

-As MH ignores case in the aliases, so too does MH-E. However, you may
+As MH ignores case in the aliases, so too does MH-E@. However, you may

 turn off the option @code{mh-alias-completion-ignore-case-flag} to
 make case significant which can be used to segregate completion of
 your aliases. You might use uppercase for mailing lists and lowercase
 turn off the option @code{mh-alias-completion-ignore-case-flag} to
 make case significant which can be used to segregate completion of
 your aliases. You might use uppercase for mailing lists and lowercase


@@ -8647,7 +8647,7 @@ modify. Note that for them to become accessible, you'll have to load
 @vtable @code
 @item gnus-secondary-select-methods
 Select the @samp{nnml} value. This select method uses directories for
 @vtable @code
 @item gnus-secondary-select-methods
 Select the @samp{nnml} value. This select method uses directories for

-folders and individual files for messages, just like MH. You do not
+folders and individual files for messages, just like MH@. You do not

 have to set an address.
 @c -------------------------
 @item mail-sources
 have to set an address.
 @c -------------------------
 @item mail-sources


@@ -8725,7 +8725,7 @@ positive we won't ask for it.
 @cindex SourceForge
 @cindex mailing lists
 
 @cindex SourceForge
 @cindex mailing lists
 

-There are several mailing lists for MH-E. They are @i{mh-e-users at
+There are several mailing lists for MH-E@. They are @i{mh-e-users at

 lists.sourceforge.net}, @i{mh-e-announce at lists.sourceforge.net},
 and @i{mh-e-devel at lists.sourceforge.net}. You can subscribe or view
 the archives at @uref{https://sourceforge.net/mail/?group_id=13357,
 lists.sourceforge.net}, @i{mh-e-announce at lists.sourceforge.net},
 and @i{mh-e-devel at lists.sourceforge.net}. You can subscribe or view
 the archives at @uref{https://sourceforge.net/mail/?group_id=13357,


@@ -8792,9 +8792,9 @@ instead.
 After you download and extract the MH-E tarball, read the
 @file{README} file and @file{MH-E-NEWS}. These correspond to the
 release notes and change log mentioned above. The file @file{README}
 After you download and extract the MH-E tarball, read the
 @file{README} file and @file{MH-E-NEWS}. These correspond to the
 release notes and change log mentioned above. The file @file{README}

-contains instructions on installing MH-E. If you're already running
+contains instructions on installing MH-E@. If you're already running

 Emacs, please quit that session and start again to load in the new
 Emacs, please quit that session and start again to load in the new

-MH-E. Check that you're running the new version with the command
+MH-E@. Check that you're running the new version with the command

 @kbd{M-x mh-version}.
 
 @cindex contributed software
 @kbd{M-x mh-version}.
 
 @cindex contributed software


@@ -8904,13 +8904,13 @@ limited the use and appeal of the package.
 @cindex @command{xmh}, in MH-E history
 
 In '89, I came to Wisconsin as a professor and decided not to work on
 @cindex @command{xmh}, in MH-E history
 
 In '89, I came to Wisconsin as a professor and decided not to work on

-MH-E. It was stable, except for minor bugs, and had enough
+MH-E@. It was stable, except for minor bugs, and had enough

 functionality, so I let it be for a few years. Stephen Gildea of BBN
 began to pester me about the bugs, but I ignored them. In 1990, he
 went off to the X Consortium, said good bye, and said that he would
 now be using @command{xmh}. A few months later, he came back and said
 that he couldn't stand @command{xmh} and could I put a few more bug fixes
 functionality, so I let it be for a few years. Stephen Gildea of BBN
 began to pester me about the bugs, but I ignored them. In 1990, he
 went off to the X Consortium, said good bye, and said that he would
 now be using @command{xmh}. A few months later, he came back and said
 that he couldn't stand @command{xmh} and could I put a few more bug fixes

-into MH-E. At that point, I had no interest in fixing MH-E, so I gave
+into MH-E@. At that point, I had no interest in fixing MH-E, so I gave

 the responsibility of maintenance to him and he has done a fine job
 since then.
 
 the responsibility of maintenance to him and he has done a fine job
 since then.
 


@@ -8931,7 +8931,7 @@ modifications of my own) and dislike having to use applications with
 embedded editors; they never live up to Emacs.
 
 MH is the mail reader of choice at BBN, so I converted to it. Since I
 embedded editors; they never live up to Emacs.
 
 MH is the mail reader of choice at BBN, so I converted to it. Since I

-didn't want to give up using an Emacs interface, I started using MH-E.
+didn't want to give up using an Emacs interface, I started using MH-E@.

 As is my wont, I started hacking on it almost immediately. I first
 used version 3.4m. One of the first features I added was to treat the
 folder buffer as a file-visiting buffer: you could lock it, save it,
 As is my wont, I started hacking on it almost immediately. I first
 used version 3.4m. One of the first features I added was to treat the
 folder buffer as a file-visiting buffer: you could lock it, save it,


@@ -8943,7 +8943,7 @@ MH-E was too slow and optimized it a lot. Version, 3.7, distributed
 with Emacs 18.56 in 1990, was noticeably faster.
 
 When I moved to the X Consortium I became the first person there to
 with Emacs 18.56 in 1990, was noticeably faster.
 
 When I moved to the X Consortium I became the first person there to

-not use xmh. (There is now one other engineer there using MH-E.) About
+not use xmh. (There is now one other engineer there using MH-E@.) About

 this point I took over maintenance of MH-E from Jim and was finally
 able to add some features Jim hadn't accepted, such as the backward
 searching undo. My first release was 3.8 (Emacs 18.58) in 1992.
 this point I took over maintenance of MH-E from Jim and was finally
 able to add some features Jim hadn't accepted, such as the backward
 searching undo. My first release was 3.8 (Emacs 18.58) in 1992.