@c This is part of the Emacs manual.
-@c Copyright (C) 1985,86,87,93,94,95,97,00,2001 Free Software Foundation, Inc.
+@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001,
+@c 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
-@iftex
+
+@node Killing, Yanking, Mark, Top
@chapter Killing and Moving Text
+@ifnottex
+@raisesections
+@end ifnottex
+
@dfn{Killing} means erasing text and copying it into the @dfn{kill
-ring}, from which it can be retrieved by @dfn{yanking} it. Some systems
-use the terms ``cutting'' and ``pasting'' for these operations.
-
- The most common way of moving or copying text within Emacs is to kill it
-and later yank it elsewhere in one or more places. This is very safe
-because Emacs remembers several recent kills, not just the last one. It
-is versatile, because the many commands for killing syntactic units can
-also be used for moving those units. But there are other ways of
+ring}, from which you can bring it back into the buffer by
+@dfn{yanking} it. (Some systems use the terms ``cutting'' and
+``pasting'' for these operations.) This is the most common way of
+moving or copying text within Emacs. Killing and yanking is very safe
+because Emacs remembers several recent kills, not just the last one.
+It is versatile, because the many commands for killing syntactic units
+can also be used for moving those units. But there are other ways of
copying text for special purposes.
- On terminals that support multiple windows for multiple applications,
-the kill commands also provide a way to select text for other applications
-to copy, and the Emacs yank commands can access selections made by
-other programs.
-
- Emacs has only one kill ring for all buffers, so you can kill text in
-one buffer and yank it in another buffer.
-
-@end iftex
-
-@node Killing, Yanking, Mark, Top
+@iftex
@section Deletion and Killing
+@end iftex
@cindex killing text
@cindex cutting text
@cindex deletion
Most commands which erase text from the buffer save it in the kill
-ring so that you can move or copy it to other parts of the buffer.
-These commands are known as @dfn{kill} commands. The rest of the
-commands that erase text do not save it in the kill ring; they are known
-as @dfn{delete} commands. (This distinction is made only for erasure of
-text in the buffer.) If you do a kill or delete command by mistake, you
-can use the @kbd{C-x u} (@code{undo}) command to undo it
-(@pxref{Undo}).
-
-@vindex kill-read-only-ok
-@cindex read-only text, killing
- You cannot kill read-only text, since such text does not allow any
-kind of modification. But some users like to use the kill commands to
-copy read-only text into the kill ring, without actually changing it.
-If you set the variable @code{kill-read-only-ok} to a non-@code{nil}
-value, the kill commands work specially in a read-only buffer: they
-move over text, and copy it to the kill ring, without actually
-deleting it from the buffer. When this happens, a message in the echo
-area tells you what is happening.
+ring. These commands are known as @dfn{kill} commands. The commands
+that erase text but do not save it in the kill ring are known as
+@dfn{delete} commands. The @kbd{C-x u} (@code{undo}) command
+(@pxref{Undo}) can undo both kill and delete commands; the importance
+of the kill ring is that you can also yank the text in a different
+place or places. Emacs has only one kill ring for all buffers, so you
+can kill text in one buffer and yank it in another buffer.
The delete commands include @kbd{C-d} (@code{delete-char}) and
@key{DEL} (@code{delete-backward-char}), which delete only one
character at a time, and those commands that delete only spaces or
-newlines. Commands that can destroy significant amounts of nontrivial
+newlines. Commands that can erase significant amounts of nontrivial
data generally do a kill operation instead. The commands' names and
individual descriptions use the words @samp{kill} and @samp{delete} to
say which kind of operation they perform.
- On window systems, the most recent kill done in Emacs is also the
-primary selection, if it is more recent than any selection you made in
-another program. This means that the paste commands of other window
-applications copy the text that you killed in Emacs.
-
-@cindex Delete Selection mode
-@cindex mode, Delete Selection
-@findex delete-selection-mode
- Many window systems follow the convention that insertion while text
-is selected deletes the selected text. You can make Emacs behave this
-way by enabling Delete Selection mode, with @kbd{M-x
-delete-selection-mode}, or using Custom. Another effect of this mode
-is that @key{DEL}, @kbd{C-d} and some other keys, when a selection
-exists, will kill the whole selection. It also enables Transient Mark
-mode (@pxref{Transient Mark}).
+@vindex kill-read-only-ok
+@cindex read-only text, killing
+ You cannot kill read-only text, since such text does not allow any
+kind of modification. But some users like to use the kill commands to
+copy read-only text into the kill ring, without actually changing it.
+Therefore, the kill commands work specially in a read-only buffer:
+they move over text, and copy it to the kill ring, without actually
+deleting it from the buffer. Normally, kill commands beep and display
+an error message when this happens. But if you set the variable
+@code{kill-read-only-ok} to a non-@code{nil} value, they just print a
+message in the echo area to explain why the text has not been erased.
@menu
* Deletion:: Commands for deleting small amounts of text and
blank areas.
* Killing by Lines:: How to kill entire lines of text at one time.
* Other Kill Commands:: Commands to kill large regions of text and
- syntactic units such as words and sentences.
+ syntactic units such as words and sentences.
+* Graphical Kill:: The kill ring on graphical terminals:
+ yanking between applications.
@end menu
@need 1500
@findex normal-erase-is-backspace-mode
On most text-only terminals, Emacs cannot tell which keys the
keyboard really has, so it follows a uniform plan which may or may not
-fit your keyboard. The uniform plan is that the ASCII @key{DEL}
-character deletes, and the ASCII @key{BS} (backspace) character asks
+fit your keyboard. The uniform plan is that the @acronym{ASCII} @key{DEL}
+character deletes, and the @acronym{ASCII} @key{BS} (backspace) character asks
for help (it is the same as @kbd{C-h}). If this is not right for your
keyboard, such as if you find that the key which ought to delete backwards
enters Help instead, see @ref{DEL Does Not Delete}.
characters before and after point. @kbd{M-@key{SPC}}
(@code{just-one-space}) does likewise but leaves a single space after
point, regardless of the number of spaces that existed previously (even
-if there were none before).
+if there were none before). With a numeric argument @var{n}, it
+leaves @var{n} spaces after point.
@kbd{C-x C-o} (@code{delete-blank-lines}) deletes all blank lines
after the current line. If the current line is blank, it deletes all
blank lines preceding the current line as well (leaving one blank line,
-the current line).
+the current line). On a solitary blank line, it deletes that line.
@kbd{M-^} (@code{delete-indentation}) joins the current line and the
previous line, by deleting a newline and all surrounding spaces, usually
Kill through the next occurrence of @var{char} (@code{zap-to-char}).
@end table
- A kill command which is very general is @kbd{C-w}
-(@code{kill-region}), which kills everything between point and the
-mark. With this command, you can kill any contiguous sequence of
-characters, if you first set the region around them.
+ The most general kill command is @kbd{C-w} (@code{kill-region}),
+which kills everything between point and the mark. With this command,
+you can kill any contiguous sequence of characters, if you first set
+the region around them.
@kindex M-z
@findex zap-to-char
(@pxref{Expressions}); and sentences, with @kbd{C-x @key{DEL}} and
@kbd{M-k} (@pxref{Sentences}).@refill
- You can use kill commands in read-only buffers. They don't actually
-change the buffer, and they beep to warn you of that, but they do copy
-the text you tried to kill into the kill ring, so you can yank it into
-other buffers. Most of the kill commands move point across the text
-they copy in this way, so that successive kill commands build up a
-single kill ring entry as usual.
+@node Graphical Kill
+@subsection Killing on Graphical Terminals
+
+ On multi-window terminals, the most recent kill done in Emacs is
+also the primary selection, if it is more recent than any selection
+you made in another program. This means that the paste commands of
+other applications with separate windows copy the text that you killed
+in Emacs. In addition, Emacs yank commands treat other applications'
+selections as part of the kill ring, so you can yank them into Emacs.
+
+@cindex Delete Selection mode
+@cindex mode, Delete Selection
+@findex delete-selection-mode
+ Many window systems follow the convention that insertion while text
+is selected deletes the selected text. You can make Emacs behave this
+way by enabling Delete Selection mode, with @kbd{M-x
+delete-selection-mode}, or using Custom. Another effect of this mode
+is that @key{DEL}, @kbd{C-d} and some other keys, when a selection
+exists, will kill the whole selection. It also enables Transient Mark
+mode (@pxref{Transient Mark}).
@node Yanking, Accumulating Text, Killing, Top
@section Yanking
@dfn{Yanking} means reinserting text previously killed. This is what
some systems call ``pasting.'' The usual way to move or copy text is to
-kill it and then yank it elsewhere one or more times.
+kill it and then yank it elsewhere one or more times. This is very safe
+because Emacs remembers many recent kills, not just the last one.
@table @kbd
@item C-y
(@code{yank-pop}).
@item M-w
Save region as last killed text without actually killing it
-(@code{kill-ring-save}).
+(@code{kill-ring-save}). Some systems call this ``copying''.
@item C-M-w
Append next kill to last batch of killed text (@code{append-next-kill}).
@end table
@cindex yanking and text properties
@vindex yank-excluded-properties
The yank commands discard certain text properties from the text that
-is thanked, those that might lead to annoying results. For instance,
+is yanked, those that might lead to annoying results. For instance,
they discard text properties that respond to the mouse or specify key
bindings. The variable @code{yank-excluded-properties} specifies the
properties to discard. Yanking of register contents and rectangles
@cindex accumulating scattered text
Usually we copy or move text by killing it and yanking it, but there
-are other methods convenient for copying one block of text in many
+are other convenient methods for copying one block of text in many
places, or for copying many scattered blocks of text into one place. To
copy one block to many places, store it in a register
(@pxref{Registers}). Here we describe the commands to accumulate
@table @kbd
@item C-x r k
-Kill the text of the region-rectangle, saving its contents as the
+Kill the text of the region-rectangle, saving its contents as the
``last killed rectangle'' (@code{kill-rectangle}).
@item C-x r d
Delete the text of the region-rectangle (@code{delete-rectangle}).
Insert blank space to fill the space of the region-rectangle
(@code{open-rectangle}). This pushes the previous contents of the
region-rectangle rightward.
-@item M-x clear-rectangle
-Clear the region-rectangle by replacing its contents with spaces.
+@item C-x r c
+Clear the region-rectangle by replacing its contents with spaces
+(@code{clear-rectangle}).
@item M-x delete-whitespace-rectangle
Delete whitespace in each of the lines on the specified rectangle,
starting from the left edge column of the rectangle.
@kindex C-x r o
@findex open-rectangle
+@kindex C-x r c
@findex clear-rectangle
There are two commands you can use for making blank rectangles:
-@kbd{M-x clear-rectangle} which blanks out existing text, and @kbd{C-x r
-o} (@code{open-rectangle}) which inserts a blank rectangle. Clearing a
-rectangle is equivalent to deleting it and then inserting a blank
-rectangle of the same size.
+@kbd{C-x r c} (@code{clear-rectangle}) which blanks out existing text,
+and @kbd{C-x r o} (@code{open-rectangle}) which inserts a blank
+rectangle. Clearing a rectangle is equivalent to deleting it and then
+inserting a blank rectangle of the same size.
@findex delete-whitespace-rectangle
The command @kbd{M-x delete-whitespace-rectangle} deletes horizontal
rectangle shifts right.
@findex string-insert-rectangle
- The command @kbd{M-x string-insert-rectangle} is similar to
-@code{string-rectangle}, but inserts the string on each line,
+ The command @kbd{M-x string-insert-rectangle} is similar to
+@code{string-rectangle}, but inserts the string on each line,
shifting the original text to the right.
+
+@ifnottex
+@lowersections
+@end ifnottex
+
+@ignore
+ arch-tag: d8da8f96-0928-449a-816e-ff2d3497866c
+@end ignore