#### be distributed. This means that if you add a file with an odd name,
#### you should make sure that this script will include it.
-# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+# Copyright (C) 1995, 1997, 1998 Free Software Foundation, Inc.
#
# This file is part of GNU Emacs.
#
### Print out each line we read, for debugging's sake.
### set -v
-## Don't protect any files.
+## Don't restrict access to any files.
umask 0
update=yes
+check=yes
clean_up=no
make_tar=no
newer=""
"--no-update" )
update=no
;;
+ ## This option says don't check for bad file names, etc.
+ "--no-check" )
+ check=no
+ ;;
## This option tells make-dist to make the distribution normally, then
## remove all files older than the given timestamp file. This is useful
## for creating incremental or patch distributions.
fi
### Find where to run Emacs.
+### (We don't accept EMACS=t as an answer, since that probably only means
+### that the shell is running in an Emacs window.)
if [ $update = yes ];
then
if [ -f src/emacs ];
then
EMACS=`pwd`/src/emacs
else
- if [ x$EMACS = x ];
+ if [ "x$EMACS" = "x" -o "x$EMACS" = "xt" ];
then
echo You must specify the EMACS environment variable 2>&1
exit 1
exit 1
fi
-### Check for .elc files with no corresponding .el file.
-ls -1 lisp/[a-z]*.el lisp/[a-z]*/[a-z]*.el \
- leim/[a-z]*.el leim/[a-z]*/[a-z]*.el | sed 's/\.el$/.elc/' > /tmp/el
-ls -1 lisp/[a-z]*.elc lisp/[a-z]*/[a-z]*.elc \
- leim/[a-z]*.elc leim/[a-z]*/[a-z]*.elc > /tmp/elc
-bogosities="`comm -13 /tmp/el /tmp/elc`"
-if [ "${bogosities}" != "" ]; then
- echo "The following .elc files have no corresponding .el files:"
- echo "${bogosities}"
-fi
-rm -f /tmp/el /tmp/elc
-
-### Check for .el files with no corresponding .elc file.
-((cd lisp; ls -1 [a-z]*.el [a-z]*/[a-z]*.el)
- (cd leim; ls -1 [a-z]*.el [a-z]*/[a-z]*.el)) > /tmp/el
-((cd lisp; ls -1 [a-z]*.elc [a-z]*/[a-z]*.elc)
- (cd leim; ls -1 [a-z]*.elc [a-z]*/[a-z]*.elc)) | sed 's/\.elc$/.el/' > /tmp/elc
-losers="`comm -23 /tmp/el /tmp/elc`"
-bogosities=
-for file in $losers; do
- file1=`echo $file | sed -e "s|.*/||"`
- if ! grep -q "dontcompilefiles:.* $file1\($\| \)" lisp/Makefile; then
- case $file in
- site-init.el | site-load.el | site-start.el | default.el)
- ;;
- term/*)
- ;;
- *)
- bogosities="$file $bogosities"
- ;;
- esac
+### Find where to run Emacs.
+if [ $check = yes ];
+then
+ ### Check for .elc files with no corresponding .el file.
+ ls -1 lisp/[a-z]*.el lisp/[a-z]*/[a-z]*.el \
+ leim/[a-z]*.el leim/[a-z]*/[a-z]*.el | sed 's/\.el$/.elc/' > /tmp/el
+ ls -1 lisp/[a-z]*.elc lisp/[a-z]*/[a-z]*.elc \
+ leim/[a-z]*.elc leim/[a-z]*/[a-z]*.elc > /tmp/elc
+ bogosities="`comm -13 /tmp/el /tmp/elc`"
+ if [ "${bogosities}" != "" ]; then
+ echo "The following .elc files have no corresponding .el files:"
+ echo "${bogosities}"
fi
-done
-if [ x"${bogosities}" != x"" ]; then
- echo "The following .el files have no corresponding .elc files:"
- echo "${bogosities}"
-fi
-rm -f /tmp/el /tmp/elc
+ rm -f /tmp/el /tmp/elc
+
+ ### Check for .el files with no corresponding .elc file.
+ (cd lisp; ls -1 [a-z]*.el [a-z]*/[a-z]*.el ; \
+ cd ../leim; ls -1 [a-z]*.el [a-z]*/[a-z]*.el) > /tmp/el
+ (cd lisp; ls -1 [a-z]*.elc [a-z]*/[a-z]*.elc; \
+ cd ../leim; ls -1 [a-z]*.elc [a-z]*/[a-z]*.elc) | sed 's/\.elc$/.el/' > /tmp/elc
+ losers="`comm -23 /tmp/el /tmp/elc`"
+ bogosities=
+ for file in $losers; do
+ file1=`echo $file | sed -e "s|.*/||"`
+ if ! grep -q "dontcompilefiles:.* $file1\($\| \)" lisp/Makefile; then
+ case $file in
+ site-init.el | site-load.el | site-start.el | default.el)
+ ;;
+ term/*)
+ ;;
+ *)
+ bogosities="$file $bogosities"
+ ;;
+ esac
+ fi
+ done
+ if [ x"${bogosities}" != x"" ]; then
+ echo "The following .el files have no corresponding .elc files:"
+ echo "${bogosities}"
+ fi
+ rm -f /tmp/el /tmp/elc
-### Check for .el files that would overflow the 14-char limit if compiled.
-long=`find lisp leim -name '[a-zA-Z0-9]??????????*.el' -print`
-if [ "$long" != "" ]; then
- echo "The following .el file names are too long:"
- echo "$long"
+ ### Check for .el files that would overflow the 14-char limit if compiled.
+ long=`find lisp leim -name '[a-zA-Z0-9]??????????*.el' -print`
+ if [ "$long" != "" ]; then
+ echo "The following .el file names are too long:"
+ echo "$long"
+ fi
fi
### Make sure configure is newer than configure.in.
echo "Making lisp/MANIFEST"
-(cd lisp; head -1 [!=]*.el | grep '^;' | sed -e 's/;;; //' > MANIFEST)
+(cd lisp;
+ files=`echo [!=]*.el | sed -e 's/ subdirs.el / /' -e 's/ default.el / /'`
+ for dir in [!=]*; do
+ if [ -d $dir ] && [ $dir != term ] && [ $dir != RCS ]; then
+ echo $dir
+ thisdir=`echo $dir/[!=]*.el | sed -e 's/ subdirs.el / /'`
+ files="$files $thisdir"
+ fi
+ done
+ head -1 $files | grep '^;' | sed -e 's/;;; //' | sort > MANIFEST)
echo "Creating staging directory: \`${tempparent}'"
### tar file; this means that people can start reading the INSTALL and
### README while the rest of the tar file is still unpacking. Whoopee.
echo "Making links to top-level files"
-ln GETTING.GNU.SOFTWARE INSTALL PROBLEMS README BUGS move-if-change ${tempdir}
+ln GETTING.GNU.SOFTWARE INSTALL README BUGS move-if-change ${tempdir}
ln ChangeLog Makefile.in configure configure.in ${tempdir}
ln config.bat make-dist update-subdirs vpath.sed ${tempdir}
### Copy these files; they're cross-filesystem symlinks.
'$1 " " $2 " " $3 " " $4 " " $5 == "This directory tree holds version" { $6 = version; print $0 }
$1 " " $2 " " $3 " " $4 " " $5 != "This directory tree holds version"' \
version=${version} README > tmp.README
- mv tmp.README README)
+ mv -f tmp.README README)
echo "Creating subdirectories"
real-leim/SKK-DIC real-leim/skk real-leim/quail \
src src/m src/s src/bitmaps lib-src oldXMenu lwlib \
nt nt/inc nt/inc/sys nt/inc/arpa nt/inc/netinet \
- etc etc/e lock cpp info man msdos vms; do
+ etc etc/e lock info man msdos vms; do
mkdir ${tempdir}/${subdir}
done
cd ../../${tempdir}/etc/e
rm -f *~ \#*\# *,v =* core)
-echo "Making links to \`cpp'"
-(cd cpp
- ln cccp.c cexp.y Makefile README ../${tempdir}/cpp)
-
echo "Making links to \`info'"
# Don't distribute backups or autosaves.
(cd info