- Font Lock mode uses several specifically named faces to do its job,
-including @code{font-lock-string-face}, @code{font-lock-comment-face},
-and others. The easiest way to find them all is to use completion
-on the face name in @code{set-face-foreground}.
-
- To change the colors or the fonts used by Font Lock mode to fontify
-different parts of text, just change these faces. There are
-two ways to do it:
-
-@itemize @bullet
-@item
-Invoke @kbd{M-x set-face-foreground} or @kbd{M-x set-face-background}
-to change the colors of a particular face used by Font Lock.
-@xref{Faces}. The command @kbd{M-x list-faces-display} displays all
-the faces currently known to Emacs, including those used by Font Lock.
-
-@item
-Customize the faces interactively with @kbd{M-x customize-face}, as
-described in @ref{Face Customization}.
-@end itemize
-
-@kindex M-g M-g
-@findex font-lock-fontify-block
- In Font Lock mode, when you edit the text, the highlighting updates
-automatically in the line that you changed. Most changes don't affect
-the highlighting of subsequent lines, but occasionally they do. To
-rehighlight a range of lines, use the command @kbd{M-g M-g}
-(@code{font-lock-fontify-block}).
-
-@vindex font-lock-mark-block-function
- In certain major modes, @kbd{M-g M-g} refontifies the entire current
-function. (The variable @code{font-lock-mark-block-function} controls
-how to find the current function.) In other major modes, @kbd{M-g M-g}
-refontifies 16 lines above and below point.
-
- With a prefix argument @var{n}, @kbd{M-g M-g} refontifies @var{n}
-lines above and below point, regardless of the mode.
-
- To get the full benefit of Font Lock mode, you need to choose a
-default font which has bold, italic, and bold-italic variants; or else
-you need to have a color or gray-scale screen.
-
-@vindex font-lock-maximum-decoration
- The variable @code{font-lock-maximum-decoration} specifies the
-preferred level of fontification, for modes that provide multiple
-levels. Level 1 is the least amount of fontification; some modes
-support levels as high as 3. The normal default is ``as high as
-possible.'' You can specify an integer, which applies to all modes, or
-you can specify different numbers for particular major modes; for
-example, to use level 1 for C/C++ modes, and the default level
-otherwise, use this:
-
-@example
-(setq font-lock-maximum-decoration
- '((c-mode . 1) (c++-mode . 1)))
-@end example
-
-@vindex font-lock-maximum-size
- Fontification can be too slow for large buffers, so you can suppress
-it. The variable @code{font-lock-maximum-size} specifies a buffer size,
-beyond which buffer fontification is suppressed.
-
-@c @w is used below to prevent a bad page-break.
-@vindex font-lock-beginning-of-syntax-function
- Comment and string fontification (or ``syntactic'' fontification)
-relies on analysis of the syntactic structure of the buffer text. For
-the purposes of speed, some modes including C mode and Lisp mode rely on
-a special convention: an open-parenthesis in the leftmost column always
-defines the @w{beginning} of a defun, and is thus always outside any string
-or comment. (@xref{Defuns}.) If you don't follow this convention,
-then Font Lock mode can misfontify the text after an open-parenthesis in
-the leftmost column that is inside a string or comment.
-
- The variable @code{font-lock-beginning-of-syntax-function} (always
-buffer-local) specifies how Font Lock mode can find a position
-guaranteed to be outside any comment or string. In modes which use the
-leftmost column parenthesis convention, the default value of the variable
-is @code{beginning-of-defun}---that tells Font Lock mode to use the
-convention. If you set this variable to @code{nil}, Font Lock no longer
-relies on the convention. This avoids incorrect results, but the price
-is that, in some cases, fontification for a changed text must rescan
-buffer text from the beginning of the buffer.
-
-@findex font-lock-add-keywords
- Font Lock highlighting patterns already exist for many modes, but you
-may want to fontify additional patterns. You can use the function
-@code{font-lock-add-keywords}, to add your own highlighting patterns for
-a particular mode. For example, to highlight @samp{FIXME:} words in C
-comments, use this:
-
-@example
-(font-lock-add-keywords
- 'c-mode
- '(("\\<\\(FIXME\\):" 1 font-lock-warning-face t)))
-@end example
-
-@node Highlight Changes
-@section Highlight Changes Mode
-
-@findex highlight-changes-mode
- Use @kbd{M-x highlight-changes-mode} to enable a minor mode
-that uses faces (colors, typically) to indicate which parts of
-the buffer were changed most recently.
-
-@node Highlight Interactively
-@section Interactive Highlighting by Matching
-@cindex highlighting by matching
-@cindex interactive highlighting
-
- It is sometimes useful to highlight the strings that match a certain
-regular expression. For example, you might wish to see all the
-references to a certain variable in a program source file, or highlight
-certain parts in a voluminous output of some program, or make certain
-cliches stand out in an article.
-
-@findex hi-lock-mode
- Use the @kbd{M-x hi-lock-mode} command to turn on a minor mode that
-allows you to specify regular expressions of the text to be
-highlighted. Hi-lock mode works like Font Lock (@pxref{Font Lock}),
-except that it lets you specify explicitly what parts of text to
-highlight. You control Hi-lock mode with these commands:
-
-@table @kbd
-@item C-x w h @var{regexp} @key{RET} @var{face} @key{RET}
-@kindex C-x w h
-@findex highlight-regexp
-Highlight text that matches
-@var{regexp} using face @var{face} (@code{highlight-regexp}).
-By using this command more than once, you can highlight various
-parts of the text in different ways.
-
-@item C-x w r @var{regexp} @key{RET}
-@kindex C-x w r
-@findex unhighlight-regexp
-Unhighlight @var{regexp} (@code{unhighlight-regexp}). You must enter
-one of the regular expressions currently specified for highlighting.
-(You can use completion, or a menu, to enter one of them
-conveniently.)
-
-@item C-x w l @var{regexp} @key{RET} @var{face} @key{RET}
-@kindex C-x w l
-@findex highlight-lines-matching-regexp
-@cindex lines, highlighting
-@cindex highlighting lines of text
-Highlight lines containing a match for @var{regexp}, using face
-@var{face} (@code{highlight-lines-matching-regexp}).
-
-@item C-x w b
-@kindex C-x w b
-@findex hi-lock-write-interactive-patterns
-Insert all the current highlighting regexp/face pairs into the buffer
-at point, with comment delimiters to prevent them from changing your
-program. This key binding runs the
-@code{hi-lock-write-interactive-patterns} command.
-
-These patterns will be read the next time you visit the file while
-Hi-lock mode is enabled, or whenever you use the @kbd{M-x
-hi-lock-find-patterns} command.
-
-@item C-x w i
-@kindex C-x w i
-@findex hi-lock-find-patterns
-@vindex hi-lock-exclude-modes
-Re-read regexp/face pairs in the current buffer
-(@code{hi-lock-write-interactive-patterns}). The list of pairs is
-found no matter where in the buffer it may be.
-
-This command does nothing if the major mode is a member of the list
-@code{hi-lock-exclude-modes}.
-@end table
-
-@node Trailing Whitespace
-@section Trailing Whitespace
-
-@cindex trailing whitespace
-@cindex whitespace, trailing
-@vindex show-trailing-whitespace
- It is easy to leave unnecessary spaces at the end of a line without
-realizing it. In most cases, this @dfn{trailing whitespace} has no
-effect, but there are special circumstances where it matters.
-
- You can make trailing whitespace visible on the screen by setting
-the variable @code{show-trailing-whitespace} to @code{t}. Then Emacs
-displays trailing whitespace in the face @code{trailing-whitespace}.
-
- Trailing whitespace is defined as spaces or tabs at the end of a
-line. But trailing whitespace is not displayed specially if point is
-at the end of the line containing the whitespace. (Doing that looks
-ugly while you are typing in new text, and the location of point is
-enough in that case to show you that the spaces are present.)
-
-@vindex indicate-empty-lines
-@vindex default-indicate-empty-lines
-@cindex empty lines
- Emacs can indicate empty lines at the end of the buffer with a
-special bitmap on the left fringe of the window. To enable this
-feature, set the buffer-local variable @code{indicate-empty-lines} to
-a non-@code{nil} value. The default value of this variable is
-controlled by the variable @code{default-indicate-empty-lines};
-by setting that variable, you can enable or disable this feature
-for all new buffers.