/* Lisp object printing and output streams.
- Copyright (C) 1985, 86, 88, 93, 94, 95, 97, 98, 1999, 2000, 01, 03, 2004
- Free Software Foundation, Inc.
+ Copyright (C) 1985, 1986, 1988, 1993, 1994, 1995, 1997,
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+ 2005, 2006 Free Software Foundation, Inc.
This file is part of GNU Emacs.
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
#include <config.h>
void print_interval ();
+/* GDB resets this to zero on W32 to disable OutputDebugString calls. */
+int print_output_debug_flag = 1;
+
\f
/* Low level output routines for characters and strings */
} \
if (MARKERP (printcharfun)) \
{ \
- if (!(XMARKER (original)->buffer)) \
+ EMACS_INT marker_pos; \
+ if (! XMARKER (printcharfun)->buffer) \
error ("Marker does not point anywhere"); \
- if (XMARKER (original)->buffer != current_buffer) \
- set_buffer_internal (XMARKER (original)->buffer); \
+ if (XMARKER (printcharfun)->buffer != current_buffer) \
+ set_buffer_internal (XMARKER (printcharfun)->buffer); \
+ marker_pos = marker_position (printcharfun); \
+ if (marker_pos < BEGV || marker_pos > ZV) \
+ error ("Marker is outside the accessible part of the buffer"); \
old_point = PT; \
old_point_byte = PT_BYTE; \
- SET_PT_BOTH (marker_position (printcharfun), \
+ SET_PT_BOTH (marker_pos, \
marker_byte_position (printcharfun)); \
start_point = PT; \
start_point_byte = PT_BYTE; \
else \
insert_1_both (print_buffer, print_buffer_pos, \
print_buffer_pos_byte, 0, 1, 0); \
+ signal_after_change (PT - print_buffer_pos, 0, print_buffer_pos);\
} \
if (free_print_buffer) \
{ \
SET_PT_BOTH (old_point + (old_point >= start_point \
? PT - start_point : 0), \
old_point_byte + (old_point_byte >= start_point_byte \
- ? PT_BYTE - start_point_byte : 0)); \
+ ? PT_BYTE - start_point_byte : 0)); \
if (old != current_buffer) \
set_buffer_internal (old);
print_buffer. PRINTCHARFUN t means output to the echo area or to
stdout if non-interactive. If neither nil nor t, call Lisp
function PRINTCHARFUN for each character printed. MULTIBYTE
- non-zero means PTR contains multibyte characters. */
+ non-zero means PTR contains multibyte characters.
+
+ In the case where PRINTCHARFUN is nil, it is safe for PTR to point
+ to data in a Lisp string. Otherwise that is not safe. */
static void
strout (ptr, size, size_byte, printcharfun, multibyte)
if (size == size_byte)
{
for (i = 0; i < size; ++i)
- insert_char ((unsigned char )*ptr++);
+ insert_char ((unsigned char) *ptr++);
}
else
{
else
chars = SBYTES (string);
- /* strout is safe for output to a frame (echo area) or to print_buffer. */
- strout (SDATA (string),
- chars, SBYTES (string),
- printcharfun, STRING_MULTIBYTE (string));
+ if (EQ (printcharfun, Qt))
+ {
+ /* Output to echo area. */
+ int nbytes = SBYTES (string);
+ char *buffer;
+
+ /* Copy the string contents so that relocation of STRING by
+ GC does not cause trouble. */
+ USE_SAFE_ALLOCA;
+
+ SAFE_ALLOCA (buffer, char *, nbytes);
+ bcopy (SDATA (string), buffer, nbytes);
+
+ strout (buffer, chars, SBYTES (string),
+ printcharfun, STRING_MULTIBYTE (string));
+
+ SAFE_FREE ();
+ }
+ else
+ /* No need to copy, since output to print_buffer can't GC. */
+ strout (SDATA (string),
+ chars, SBYTES (string),
+ printcharfun, STRING_MULTIBYTE (string));
}
else
{
to get the buffer displayed instead of just displaying the non-selected
buffer and calling the hook. It gets one argument, the buffer to display.
-usage: (with-output-to-temp-buffer BUFFNAME BODY ...) */)
+usage: (with-output-to-temp-buffer BUFNAME BODY ...) */)
(args)
Lisp_Object args;
{
doc: /* Return a string containing the printed representation of OBJECT.
OBJECT can be any Lisp object. This function outputs quoting characters
when necessary to make output that `read' can handle, whenever possible,
-unless the optional second argument NOESCAPE is non-nil.
+unless the optional second argument NOESCAPE is non-nil. For complex objects,
+the behavior is controlled by `print-level' and `print-length', which see.
OBJECT is any of the Lisp data types: a number, a string, a symbol,
a list, a buffer, a window, a frame, etc.
if (SBYTES (object) == SCHARS (object))
STRING_SET_UNIBYTE (object);
- /* Note that this won't make prepare_to_modify_buffer call
+ /* Note that this won't make prepare_to_modify_buffer call
ask-user-about-supersession-threat because this buffer
does not visit a file. */
Ferase_buffer ();
#ifdef WINDOWSNT
/* Send the output to a debugger (nothing happens if there isn't one). */
- {
- char buf[2] = {(char) XINT (character), '\0'};
- OutputDebugString (buf);
- }
+ if (print_output_debug_flag)
+ {
+ char buf[2] = {(char) XINT (character), '\0'};
+ OutputDebugString (buf);
+ }
#endif
return character;
}
+/* This function is never called. Its purpose is to prevent
+ print_output_debug_flag from being optimized away. */
+
+void
+debug_output_compilation_hack (x)
+ int x;
+{
+ print_output_debug_flag = x;
+}
-#if defined(GNU_LINUX)
+#if defined (GNU_LINUX)
/* This functionality is not vitally important in general, so we rely on
non-portable ability to use stderr as lvalue. */
doc: /* Redirect debugging output (stderr stream) to file FILE.
If FILE is nil, reset target to the initial stderr stream.
Optional arg APPEND non-nil (interactively, with prefix arg) means
-append to existing target file. */)
+append to existing target file. */)
(file, append)
Lisp_Object file, append;
{
if (initial_stderr_stream != NULL)
- fclose(stderr);
+ fclose (stderr);
stderr = initial_stderr_stream;
initial_stderr_stream = NULL;
{
file = Fexpand_file_name (file, Qnil);
initial_stderr_stream = stderr;
- stderr = fopen(SDATA (file), NILP (append) ? "w" : "a");
+ stderr = fopen (SDATA (file), NILP (append) ? "w" : "a");
if (stderr == NULL)
{
stderr = initial_stderr_stream;
Fprin1 (arg, Qexternal_debugging_output);
fprintf (stderr, "\r\n");
}
+
+void
+safe_debug_print (arg)
+ Lisp_Object arg;
+{
+ int valid = valid_lisp_object_p (arg);
+
+ if (valid > 0)
+ debug_print (arg);
+ else
+ fprintf (stderr, "#<%s_LISP_OBJECT 0x%08lx>\r\n",
+ !valid ? "INVALID" : "SOME",
+#ifdef NO_UNION_TYPE
+ (unsigned long) arg
+#else
+ (unsigned long) arg.i
+#endif
+ );
+}
+
\f
DEFUN ("error-message-string", Ferror_message_string, Serror_message_string,
1, 1, 0,
}
/* Print an error message for the error DATA onto Lisp output stream
- STREAM (suitable for the print functions). */
+ STREAM (suitable for the print functions).
+ CONTEXT is a C string describing the context of the error.
+ CALLER is the Lisp function inside which the error was signaled. */
void
print_error_message (data, stream, context, caller)
*Messages*. */
if (!NILP (caller) && SYMBOLP (caller))
{
- const char *name = SDATA (SYMBOL_NAME (caller));
- message_dolog (name, strlen (name), 0, 0);
+ Lisp_Object cname = SYMBOL_NAME (caller);
+ char *name = alloca (SBYTES (cname));
+ bcopy (SDATA (cname), name, SBYTES (cname));
+ message_dolog (name, SBYTES (cname), 0, 0);
message_dolog (": ", 2, 0, 0);
}
register Lisp_Object printcharfun;
int escapeflag;
{
- print_depth = 0;
old_backquote_output = 0;
/* Reset print_number_index and Vprint_number_table only when
start = index = print_number_index;
/* Construct Vprint_number_table.
This increments print_number_index for the objects added. */
+ print_depth = 0;
print_preprocess (obj);
/* Remove unnecessary objects, which appear only once in OBJ;
print_number_index = index;
}
+ print_depth = 0;
print_object (obj, printcharfun, escapeflag);
}
{
int i;
EMACS_INT size;
+ int loop_count = 0;
+ Lisp_Object halftail;
+
+ /* Give up if we go so deep that print_object will get an error. */
+ /* See similar code in print_object. */
+ if (print_depth >= PRINT_CIRCLE)
+ error ("Apparently circular structure being printed");
+
+ /* Avoid infinite recursion for circular nested structure
+ in the case where Vprint_circle is nil. */
+ if (NILP (Vprint_circle))
+ {
+ for (i = 0; i < print_depth; i++)
+ if (EQ (obj, being_printed[i]))
+ return;
+ being_printed[print_depth] = obj;
+ }
+
+ print_depth++;
+ halftail = obj;
loop:
if (STRINGP (obj) || CONSP (obj) || VECTORP (obj)
{
/* OBJ appears more than once. Let's remember that. */
PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qt;
- return;
+ print_depth--;
+ return;
}
/* OBJ is not yet recorded. Let's add to the table. */
break;
case Lisp_Cons:
+ /* Use HALFTAIL and LOOP_COUNT to detect circular lists,
+ just as in print_object. */
+ if (loop_count && EQ (obj, halftail))
+ break;
print_preprocess (XCAR (obj));
obj = XCDR (obj);
+ loop_count++;
+ if (!(loop_count & 1))
+ halftail = XCDR (halftail);
goto loop;
case Lisp_Vectorlike:
break;
}
}
+ print_depth--;
}
static void
register Lisp_Object printcharfun;
int escapeflag;
{
- char buf[30];
+ char buf[40];
QUIT;
print_depth++;
+ /* See similar code in print_preprocess. */
if (print_depth > PRINT_CIRCLE)
error ("Apparently circular structure being printed");
#ifdef MAX_PRINT_CHARS
PRINTCHAR ('#');
PRINTCHAR ('&');
- sprintf (buf, "%d", XBOOL_VECTOR (obj)->size);
+ sprintf (buf, "%ld", (long) XBOOL_VECTOR (obj)->size);
strout (buf, -1, -1, printcharfun, 0);
PRINTCHAR ('\"');
else if (WINDOWP (obj))
{
strout ("#<window ", -1, -1, printcharfun, 0);
- sprintf (buf, "%d", XFASTINT (XWINDOW (obj)->sequence_number));
+ sprintf (buf, "%ld", (long) XFASTINT (XWINDOW (obj)->sequence_number));
strout (buf, -1, -1, printcharfun, 0);
if (!NILP (XWINDOW (obj)->buffer))
{
PRINTCHAR (' ');
strout (SDATA (SYMBOL_NAME (h->weak)), -1, -1, printcharfun, 0);
PRINTCHAR (' ');
- sprintf (buf, "%d/%d", XFASTINT (h->count),
- XVECTOR (h->next)->size);
+ sprintf (buf, "%ld/%ld", (long) XFASTINT (h->count),
+ (long) XVECTOR (h->next)->size);
strout (buf, -1, -1, printcharfun, 0);
}
sprintf (buf, " 0x%lx", (unsigned long) h);
/* Do you think this is necessary? */
if (XMARKER (obj)->insertion_type != 0)
strout ("(moves after insertion) ", -1, -1, printcharfun, 0);
- if (!(XMARKER (obj)->buffer))
+ if (! XMARKER (obj)->buffer)
strout ("in no buffer", -1, -1, printcharfun, 0);
else
{
case Lisp_Misc_Overlay:
strout ("#<overlay ", -1, -1, printcharfun, 0);
- if (!(XMARKER (OVERLAY_START (obj))->buffer))
+ if (! XMARKER (OVERLAY_START (obj))->buffer)
strout ("in no buffer", -1, -1, printcharfun, 0);
else
{
break;
case Lisp_Misc_Intfwd:
- sprintf (buf, "#<intfwd to %d>", *XINTFWD (obj)->intvar);
+ sprintf (buf, "#<intfwd to %ld>", (long) *XINTFWD (obj)->intvar);
strout (buf, -1, -1, printcharfun, 0);
break;
case Lisp_Misc_Kboard_Objfwd:
strout ("#<kboard_objfwd to ", -1, -1, printcharfun, 0);
- print_object (*(Lisp_Object *)((char *) current_kboard
- + XKBOARD_OBJFWD (obj)->offset),
+ print_object (*(Lisp_Object *) ((char *) current_kboard
+ + XKBOARD_OBJFWD (obj)->offset),
printcharfun, escapeflag);
PRINTCHAR ('>');
break;
PRINTCHAR ('>');
break;
+ case Lisp_Misc_Save_Value:
+ strout ("#<save_value ", -1, -1, printcharfun, 0);
+ sprintf(buf, "ptr=0x%08lx int=%d",
+ (unsigned long) XSAVE_VALUE (obj)->pointer,
+ XSAVE_VALUE (obj)->integer);
+ strout (buf, -1, -1, printcharfun, 0);
+ PRINTCHAR ('>');
+ break;
+
default:
goto badtype;
}
print_object (make_number (interval->position), printcharfun, 1);
PRINTCHAR (' ');
print_object (make_number (interval->position + LENGTH (interval)),
- printcharfun, 1);
+ printcharfun, 1);
PRINTCHAR (' ');
print_object (interval->plist, printcharfun, 1);
}