# make all to compile and build Emacs.
# make install to install it.
-# make install.sysv to install on system V. Note that on system V you
-# must change mandir to /usr/local/man/man1.
-# make install.xenix to install on Xenix.
-# make install.aix to install on AIX.
# make TAGS to update tags tables.
#
# make clean or make mostlyclean
# `make distclean' should leave only the files that were in the
# distribution.
#
-# make realclean
+# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: C source files
# Still more severe - delete backup and autosave files, too.
SHELL = /bin/sh
-MAKE = make # BSD doesn't have it as a default.
+
+# If Make doesn't predefine MAKE, set it here.
+@SET_MAKE@
# ==================== Things `configure' Might Edit ====================
-CC=cc
-CONFIG_CFLAGS=-g
+CC=@CC@
+CPP=@CPP@
+C_SWITCH_SYSTEM=@c_switch_system@
+ALLOCA=@ALLOCA@
+LN_S=@LN_S@
+CFLAGS=@CFLAGS@
+LDFLAGS=@LDFLAGS@
+CPPFLAGS=@CPPFLAGS@
+C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
+LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
+YACC=@YACC@
### These help us choose version- and architecture-specific directories
### to install files in.
### This should be the number of the Emacs version we're building,
### like `18.59' or `19.0'.
-version=version-not-set
+version=@version@
### This should be the name of the configuration we're building Emacs
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
-configname=configuration-name-not-set
+configuration=@configuration@
# ==================== Where To Install Things ====================
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
-# not need to change them.
-prefix=/usr/local
+# not need to change them. This defaults to /usr/local.
+prefix=@prefix@
# Like `prefix', but used for architecture-specific files.
-exec_prefix=${prefix}
+exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
-bindir=${exec_prefix}/bin
+bindir=@bindir@
# Where to install architecture-independent data files. ${lispdir}
# and ${etcdir} are subdirectories of this.
-datadir=${prefix}/lib
+datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
-# runs. These files are all architecture-independent. Right now, the
-# only such data is the locking directory; ${lockdir} is a
-# subdirectory of this.
-statedir=${prefix}/lib
+# runs. These files are all architecture-independent.
+# Right now, this is not used.
+sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data. ${archlibdir} is a subdirectory of this.
-libdir=${exec_prefix}/lib
+libexecdir=@libexecdir@
# Where to install Emacs's man pages, and what extension they should have.
-mandir=${prefix}/man/man1
+mandir=@mandir@
manext=.1
+man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# since there are now many packages documented with the texinfo
# system, it is inappropriate to imply that it is part of Emacs.
-infodir=${prefix}/info
+infodir=@infodir@
+
+# Where to look for bitmap files.
+bitmapdir=@bitmapdir@
-# Where to find the source code - setting this to anything but
-# . doesn't work yet. The source code for Emacs's C kernel is
+# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's `--srcdir' option.
-srcdir=.
+
+# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
+srcdir=@srcdir@
+
+# Tell make where to find source files; this is needed for the makefiles.
+VPATH=@srcdir@
+
+# Where to find the application default.
+x_default_search_path=@x_default_search_path@
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-# Where to install the elisp files distributed with Emacs. This
-# includes the Emacs version, so that the lisp files for different
-# versions of Emacs will install themselves in separate directories.
-lispdir=${datadir}/emacs/${version}/lisp
+# Where to install the lisp files distributed with
+# Emacs. This includes the Emacs version, so that the
+# lisp files for different versions of Emacs will install
+# themselves in separate directories.
+lispdir=@lispdir@
-# Directories Emacs should search for elisp files specific to this
-# site (i.e. customizations), before consulting ${lispdir}. This
-# should be a colon-separated list of directories.
-locallisppath=${datadir}/emacs/local-lisp
-
-# Where Emacs will search to find its elisp files. Before changing
-# this, check to see if your purpose wouldn't better be served by
-# changing locallisppath. This should be a colon-separated list of
+# Directories Emacs should search for lisp files specific
+# to this site (i.e. customizations), before consulting
+# ${lispdir}. This should be a colon-separated list of
# directories.
-lisppath=${locallisppath}:${lispdir}
-
-# Where Emacs will search for its elisp files while building. This is
-# only used during the process of compiling Emacs, to help Emacs find
-# its lisp files before they've been installed in their final
-# location. It's usually identical to lisppath, except that the entry
-# for the directory containing the installed lisp files has been
-# replaced with ../lisp. This should be a colon-separated list of
-# directories.
-buildlisppath=../lisp
-
-# Where to install the other architecture-independent data files
-# distributed with Emacs (like the tutorial, the cookie recipes and
-# the Zippy database). This path usually contains the Emacs version
-# number, so the data files for multiple versions of Emacs may be
-# installed at once.
-etcdir=${datadir}/emacs/${version}/etc
+locallisppath=@locallisppath@
-# Where to create and expect the locking directory, where the Emacs
-# locking code keeps track of which files are currently being edited.
-lockdir=${statedir}/emacs/lock
-
-# Where to put executables to be run by Emacs rather than the user.
-# This path usually includes the Emacs version and configuration name,
-# so that multiple configurations for multiple versions of Emacs may
-# be installed at once.
-archlibdir=${libdir}/emacs/${version}/${configname}
+# Where Emacs will search to find its lisp files. Before
+# changing this, check to see if your purpose wouldn't
+# better be served by changing locallisppath. This
+# should be a colon-separated list of directories.
+lisppath=@lisppath@
+
+# Where Emacs will search for its lisp files while
+# building. This is only used during the process of
+# compiling Emacs, to help Emacs find its lisp files
+# before they've been installed in their final location.
+# It's usually identical to lisppath, except that
+# it does not include locallisppath, and the
+# entry for the directory containing the installed lisp
+# files has been replaced with ../lisp. This should be a
+# colon-separated list of directories.
+buildlisppath=${srcdir}/lisp
+
+# Where to install the other architecture-independent
+# data files distributed with Emacs (like the tutorial,
+# the cookie recipes and the Zippy database). This path
+# usually contains the Emacs version number, so the data
+# files for multiple versions of Emacs may be installed
+# at once.
+etcdir=@etcdir@
+
+# Where to put executables to be run by Emacs rather than
+# the user. This path usually includes the Emacs version
+# and configuration name, so that multiple configurations
+# for multiple versions of Emacs may be installed at
+# once.
+archlibdir=@archlibdir@
+
+# Where to put the docstring file.
+docdir=@docdir@
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
-INSTALL = install
-INSTALLFLAGS = -c
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_DATA = ${INSTALL}
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_INFO = install-info
+# By default, we uphold the dignity of our programs.
+INSTALL_STRIP =
# ============================= Targets ==============================
-# Flags passed down to subdirectory makefiles.
-MFLAGS =
-
-CFLAGS=${CONFIG_CFLAGS}
+# What emacs should be called when installed.
+EMACS = emacs
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
-SUBDIR = lib-src src
+SUBDIR = lib-src src leim
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile
-
-# Subdirectories to install, and where they'll go. lib-src's makefile
-# knows how to install it, so we don't do that here.
-COPYDIR = etc ${srcdir}/info ${srcdir}/lisp
-COPYDESTS = ${etcdir} ${infodir} ${lispdir}
-
-all: src/paths.h ${SUBDIR}
-
-removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/'
-
-# We force the rebuilding of src/paths.h because the user might give
-# make different values for the various directories. Since we use
-# move-if-change, src/paths.h only actually changes if the user did
-# something notable, so the only unnecessary work we do is in building
-# src/paths.h.tmp, which isn't much.
-# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC
- lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
- buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
- -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
- -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
- -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";'
- ${srcdir}/move-if-change src/paths.h.tmp src/paths.h
-
-src: lib-src
+SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
+
+# Subdirectories to install, and where they'll go.
+# lib-src's makefile knows how to install it, so we don't do that here.
+# leim's makefile also knows how to install it, so we don't do that here.
+# When installing the info files, we need to do special things to
+# avoid nuking an existing dir file, so we don't do that here;
+# instead, we have written out explicit code in the `install' targets.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = ${etcdir} ${lispdir}
+
+all: ${SUBDIR}
+
+removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
+
+# Generate epaths.h from epaths.in. This target is invoked by `configure'.
+epaths-force: FRC
+ @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
+ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ x_default_search_path=`echo ${x_default_search_path}`; \
+ sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
+ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
+ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
+ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
+ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
+ -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
+ -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
+ ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
+
+# For parallel make, src should be build before leim.
+leim: src
+
+src: lib-src FRC
+
+lib-src: FRC src/config.stamp
.RECURSIVE: ${SUBDIR}
${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
- cd $@; $(MAKE) all ${MFLAGS} \
- CC='${CC}' CFLAGS='${CFLAGS}' \
- srcdir='${srcdir}/$@' libdir='${libdir}'
-
-## We build the makefiles for the subdirectories here so that we can
-## edit the values for the path variables into them. This means that
-## when the user has built them from this makefile once, they will use
-## the right default values for the path variables.
-lib-src/Makefile: ${srcdir}/lib-src/Makefile.in Makefile
- echo "Producing \`lib-src/Makefile' from \`${srcdir}/lib-src/Makefile.in'."
- rm -f lib-src/Makefile.tmp
- (echo "# This file is generated from \`${srcdir}/lib-src/Makefile.in'." ; \
- echo "# If you are thinking about editing it, you should seriously consider" ; \
- echo "# running \`make lib-src/Makefile' at the top of the" ; \
- echo "# Emacs build tree instead, or editing" ; \
- echo "# \`${srcdir}/lib-src/Makefile.in' itself." ; \
- /bin/sed < ${srcdir}/lib-src/Makefile.in \
- -e 's|^\(version *=\).*$$|\1'"${version}"'|' \
- -e 's|^\(configname *=\).*$$|\1'"${configname}"'|' \
- -e 's|^\(prefix *=\).*$$|\1'"${prefix}"'|' \
- -e 's|^\(exec_prefix *=\).*$$|\1'"${exec_prefix}"'|' \
- -e 's|^\(libdir *=\).*$$|\1'"${libdir}"'|' \
- -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'|' \
- -e 's|^\(archlibdir *=\).*$$|\1'"${archlibdir}"'|' \
- -e 's|^CC *=.*$$|CC='"${CC}"'|' \
- -e 's|^CONFIG_CFLAGS *=.*$$|CONFIG_CFLAGS='"${CONFIG_CFLAGS}"'|' \
- -e 's|^LOADLIBES *=.*$$|LOADLIBES='"${libsrc_libs}"'|' \
- -e '/^# DIST: /d') > lib-src/Makefile.tmp
- ${srcdir}/move-if-change lib-src/Makefile.tmp lib-src/Makefile
- chmod -w lib-src/Makefile
-
-src/Makefile: ${srcdir}/src/Makefile.in Makefile
- echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'."
- rm -f src/Makefile.tmp
- (echo "# This file is generated from \`${srcdir}/src/Makefile.in'." ; \
- echo "# If you are thinking about editing it, you should seriously consider" ; \
- echo "# running \`make src/Makefile' at the top of the" ; \
- echo "# Emacs build tree instead, or editing" ; \
- echo "# \`${srcdir}/src/Makefile.in' itself." ; \
- /bin/sed < ${srcdir}/src/Makefile.in \
- -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'|' \
- -e 's|^CC *=.*$$|CC='"${CC}"'|' \
- -e 's|^CONFIG_CFLAGS *=.*$$|CONFIG_CFLAGS='"${CONFIG_CFLAGS}"'|' \
- -e '/^# DIST: /d') > src/Makefile.tmp
- ${srcdir}/move-if-change src/Makefile.tmp src/Makefile
- chmod -w src/Makefile
-
-oldXMenu/Makefile: ${srcdir}/oldXMenu/Makefile Makefile
- echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'."
- rm -f src/Makefile.tmp
- cp "${srcdir}"/oldXMenu/Makefile oldXMenu/Makefile
-
-
-Makefile:
+ cd $@; $(MAKE) all $(MFLAGS) \
+ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
+ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
+
+blessmail: ${SUBDIR_MAKEFILES} src FRC
+ cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
+ MAKE='${MAKE}' archlibdir='$(archlibdir)'
+
+Makefile: $(srcdir)/Makefile.in config.status
+ ./config.status
+
+config.status: ${srcdir}/configure
+ ./config.status --recheck
+
+${srcdir}/configure: configure.in aclocal.m4
+ cd ${srcdir} && autoconf
+
+src/Makefile: $(srcdir)/src/Makefile.in config.status
+ ./config.status
+
+src/config.stamp: $(srcdir)/src/config.in config.status
+ ./config.status
+ touch src/config.stamp
+
+lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
+ ./config.status
+
+man/Makefile: $(srcdir)/man/Makefile.in config.status
+ ./config.status
+
+oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
+ ./config.status
+
+lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
+ ./config.status
+
+leim/Makefile: $(srcdir)/leim/Makefile.in config.status
./config.status
# ==================== Installation ====================
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-install: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ]; then \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xf - ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 ./dir ${infodir}/dir ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 $$f ${infodir}/$$f ; \
- done ; \
- fi)
- for page in emacs etags ctags ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 etc/$${page}.1 \
- ${mandir}/$${page}${manext} ; \
+
+## On AIX, use tar xBf.
+## On Xenix, use tar xpf.
+
+.PHONY: install mkdir
+
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
+### We do install-arch-indep first because
+### the executable needs the Lisp files and DOC file to work properly.
+install: all install-arch-indep install-arch-dep install-leim blessmail
+ @true
+
+### Install the executables that were compiled specifically for this machine.
+### It would be nice to do something for a parallel make
+### to ensure that install-arch-indep finishes before this starts.
+install-arch-dep: mkdir
+ (cd lib-src; \
+ $(MAKE) install $(MFLAGS) prefix=${prefix} \
+ exec_prefix=${exec_prefix} bindir=${bindir} \
+ libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ INSTALL_STRIP=${INSTALL_STRIP})
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version}
+ -chmod 1755 ${bindir}/emacs-${version}
+ rm -f ${bindir}/$(EMACS)
+ -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
+ -unset CDPATH; \
+ for f in `cd lib-src && echo fns-*.el`; do \
+ if test -r lib-src/$$f ; then \
+ ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \
+ else true; fi ; \
done
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -m 1755 src/emacs \
- ${bindir}/emacs-${version}
- -rm -f ${bindir}/emacs
- ln ${bindir}/emacs-${version} ${bindir}/emacs
-## If we let lib-src do its own installation, that means we
-## don't have to duplicate the list of utilities to install in
-## this Makefile as well.
-install.sysv: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
+### Install the files that are machine-independent.
+### Most of them come straight from the distribution;
+### the exception is the DOC-* files, which are copied
+## from the build directory.
+
+## Note that we copy DOC* and then delete DOC
+## as a workaround for a bug in tar on Ultrix 4.2.
+install-arch-indep: mkdir info
-set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; find . -print | cpio -pdum ${dest} ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- cpset ./dir ${infodir} 444 bin bin ; \
+ unset CDPATH; \
+ for dir in ${COPYDIR} ; do \
+ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
+ rm -rf $$1 ; \
fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- cpset $$f ${infodir} 444 bin bin ; \
- done ; \
- fi)
- -for page in emacs etags ctags ; do \
- cpset etc/$${page}.1 ${mandir}/$${page}${manext} 444 bin bin ; \
+ shift ; \
done
- -/bin/rm -f ${bindir}/emacs
- -cpset src/emacs ${bindir}/emacs-${version} 1755 bin bin
- -ln ${bindir}/emacs-${version} ${bindir}/emacs
-
-## If we let lib-src do its own installation, that means we
-## don't have to duplicate the list of utilities to install in
-## this Makefile as well.
-install.xenix: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
-set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xpf - ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- cp ./dir ${infodir} ; \
- chmod 444 ${infodir}/dir ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- cp $$f ${infodir} ; \
- chmod 444 ${infodir}/$$f ; \
- done ; \
- fi)
- for page in emacs etags ctags ; do \
- cp etc/$${page}.1 ${mandir}/$${page}${manext} ; \
- chmod 444 ${mandir}/$${page}${manext} ; \
+ mkdir ${COPYDESTS} ; \
+ chmod ugo+rx ${COPYDESTS} ; \
+ unset CDPATH; \
+ for dir in ${COPYDIR} ; do \
+ dest=$$1 ; shift ; \
+ [ -d $${dir} ] \
+ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
+ && (echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -cf - . ) \
+ |(cd $${dest};umask 022; tar -xvf - && cat > /dev/null); \
+ for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
+ chmod a+rx $${subdir} ; \
+ rm -rf $${subdir}/RCS ; \
+ rm -rf $${subdir}/CVS ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/[mM]akefile* ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ rm -f $${subdir}/dired.todo ; \
+ done) ; \
done
- -mv -f ${bindir}/emacs ${bindir}/emacs.old
- cp src/emacs ${bindir}/emacs-${version}
- ln ${bindir}/emacs-${version} ${bindir}/emacs
- chmod 1755 ${bindir}/emacs
- -rm -f ${bindir}/emacs.old
-
-## If we let lib-src do its own installation, that means we
-## don't have to duplicate the list of utilities to install in
-## this Makefile as well.
-install.aix: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xBf - ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done ; \
- fi ; \
- done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${infodir} ./dir ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${infodir} $$f ; \
- done ; \
- fi)
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -M 1755 -f ${bindir} src/emacs
- mv ${bindir}/emacs ${bindir}/emacs-${version}
+ -rm -f ${lispdir}/subdirs.el
+ $(srcdir)/update-subdirs ${lispdir}
+ if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
+ then true; \
+ else \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \
+ fi
+ chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el
+ -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \
+ then true; \
+ else \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > ${datadir}/emacs/site-lisp/subdirs.el; \
+ fi
+ -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el
+ -unset CDPATH; \
+ if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
+ then \
+ echo "Copying etc/DOC-* to ${docdir} ..." ; \
+ (cd ./etc; tar -cf - DOC*) \
+ |(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null); \
+ (cd $(docdir); chmod a+r DOC*; rm DOC); \
+ else true; fi
+ -unset CDPATH; \
+ if [ -r ./lisp ] \
+ && [ -r ./lisp/simple.el ] \
+ && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \
+ && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
+ then \
+ echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
+ (cd lisp; tar -cf - *.el *.elc) \
+ |(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null); \
+ else true; fi
+ -unset CDPATH; \
+ thisdir=`/bin/pwd`; \
+ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
+ then \
+ (cd ${infodir}; \
+ if [ -f dir ]; then true; \
+ else \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \
+ chmod a+r ${infodir}/dir); \
+ fi; \
+ cd ${srcdir}/info ; \
+ for f in ada-mode* autotype* ccmode* cl* dired-x* ebrowse* ediff* efaq* emacs* eudc* forms* gnus* idlwave* info* message* mh-e* reftex* sc* vip* widget* pcl-cvs; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
+ chmod a+r ${infodir}/$$f); \
+ done); \
+ else true; fi
+ -unset CDPATH; \
+ thisdir=`/bin/pwd`; \
+ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
+ then \
+ for f in ada-mode autotype ccmode cl dired-x ediff efaq emacs eudc forms gnus idlwave info message mh-e reftex sc vip viper widget pcl-cvs; do \
+ (cd $${thisdir}; \
+ ${INSTALL_INFO} --dir-file=${infodir}/dir --info-file=${infodir}/$$f); \
+ done; \
+ else true; fi
+ -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir}
+ thisdir=`/bin/pwd`; \
+ cd ${srcdir}/etc; \
for page in emacs etags ctags ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${mandir} etc/$${page}.1 ;\
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
+ chmod a+r ${man1dir}/$${page}${manext}); \
done
- -rm -f ${bindir}/emacs
- ln ${bindir}/emacs-${version} ${bindir}/emacs
+
+### Install LEIM files. Although they are machine-independent, we
+### have separate target here instead of including it in
+### `install-arch-indep'. People who extracted LEIM files after they
+### insalled Emacs itself can install only LEIM files by this target.
+install-leim: leim/Makefile mkdir
+ cd leim; $(MAKE) install
+
+### Build Emacs and install it, stripping binaries while installing them.
+install-strip:
+ $(MAKE) INSTALL_STRIP=-s install
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
-### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
-### instead of mkdir. Not all systems' mkdirs have the `-p' flag.
+### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
+### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
mkdir: FRC
- ./lib-src/make-path ${COPYDESTS} ${lockdir}
- chmod 777 ${COPYDESTS} ${lockdir}
+ if [ -d ${datadir} ]; then true; else \
+ $(srcdir)/mkinstalldirs ${datadir}; \
+ chmod a+r ${datadir};\
+ fi
+ $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
+ ${bindir} ${docdir} ${libexecdir} \
+ ${datadir}/emacs/site-lisp \
+ ${datadir}/emacs/${version}/site-lisp \
+ `echo ${locallisppath} | sed 's/:/ /g'`
+
+### Delete all the installed files that the `install' target would
+### create (but not the noninstalled files such as `make all' would
+### create).
+###
+### Don't delete the lisp and etc directories if they're in the source tree.
+uninstall:
+ (cd lib-src; \
+ $(MAKE) $(MFLAGS) uninstall \
+ prefix=${prefix} exec_prefix=${exec_prefix} \
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
+ -unset CDPATH; \
+ for dir in ${lispdir} ${etcdir} ; do \
+ if [ -d $${dir} ]; then \
+ case `(cd $${dir} ; /bin/pwd)` in \
+ `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
+ * ) rm -rf $${dir} ;; \
+ esac ; \
+ case $${dir} in \
+ ${datadir}/emacs/${version}/* ) \
+ rm -rf ${datadir}/emacs/${version} \
+ ;; \
+ esac ; \
+ fi ; \
+ done
+ (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
+ (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1)
+ (cd ${bindir} && rm -f emacs-${version} $(EMACS))
-FRC:
+FRC:
# ==================== Cleaning up and miscellanea ====================
-### `clean'
-### Delete all files from the current directory that are normally
-### created by building the program. Don't delete the files that
-### record the configuration. Also preserve files that could be made
-### by building, but normally aren't because the distribution comes
-### with them.
+.PHONY: mostlyclean clean distclean maintainer-clean extraclean
+
### `mostlyclean'
-### Like `clean', but may refrain from deleting a few files that
-### people normally don't want to recompile. For example, the
-### `mostlyclean' target for GCC does not delete `libgcc.a', because
-### recompiling it is rarely necessary and takes a lot of time.
+### Like `clean', but may refrain from deleting a few files that people
+### normally don't want to recompile. For example, the `mostlyclean'
+### target for GCC does not delete `libgcc.a', because recompiling it
+### is rarely necessary and takes a lot of time.
+mostlyclean: FRC
+ (cd src; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
+ -(cd man && $(MAKE) $(MFLAGS) mostlyclean)
+ (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
+
+### `clean'
+### Delete all files from the current directory that are normally
+### created by building the program. Don't delete the files that
+### record the configuration. Also preserve files that could be made
+### by building, but normally aren't because the distribution comes
+### with them.
###
-clean mostlyclean:
- cd src; $(MAKE) clean
- cd lib-src; $(MAKE) clean
- cd oldXMenu; $(MAKE) clean
- if [ `(cd ${etcdir} ; /bin/pwd` != `(cd etc; /bin/pwd)` ] ; then \
- cd etc; $(MAKE) clean; \
- else true; \
- fi
+### Delete `.dvi' files here if they are not part of the distribution.
+clean: FRC
+ (cd src; $(MAKE) $(MFLAGS) clean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
+ (cd lwlib; $(MAKE) $(MFLAGS) clean)
+ (cd lib-src; $(MAKE) $(MFLAGS) clean)
+ -(cd man && $(MAKE) $(MFLAGS) clean)
+ (cd leim; $(MAKE) $(MFLAGS) clean)
### `distclean'
-### Delete all files from the current directory that are created by
-### configuring or building the program. This should leave only the
-### files that would be in the distribution.
-distclean:
- for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} distclean); done
- -(cd lock; rm *)
- -rm config.status config-tmp-*
-
-### `realclean'
-### Delete everything from the current directory that can be
-### reconstructed with this makefile. This typically includes
-### everything deleted by distclean, plus more: C source files
-### produced by Bison, tags tables, info files, and so on.
-realclean:
- for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} realclean); done
- (cd lock; rm *)
- rm config.status
+### Delete all files from the current directory that are created by
+### configuring or building the program. If you have unpacked the
+### source and built the program without creating any other files,
+### `make distclean' should leave only the files that were in the
+### distribution.
+top_distclean=\
+ rm -f config.status config.cache config.log ; \
+ rm -f Makefile ${SUBDIR_MAKEFILES} ; \
+ if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
+distclean: FRC
+ (cd src; $(MAKE) $(MFLAGS) distclean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) distclean)
+ (cd lib-src; $(MAKE) $(MFLAGS) distclean)
+ (cd man && $(MAKE) $(MFLAGS) distclean)
+ (cd leim; $(MAKE) $(MFLAGS) distclean)
+ (cd lisp; $(MAKE) $(MFLAGS) distclean)
+ ${top_distclean}
+
+### `maintainer-clean'
+### Delete everything from the current directory that can be
+### reconstructed with this Makefile. This typically includes
+### everything deleted by distclean, plus more: C source files
+### produced by Bison, tags tables, info files, and so on.
+###
+### One exception, however: `make maintainer-clean' should not delete
+### `configure' even if `configure' can be remade using a rule in the
+### Makefile. More generally, `make maintainer-clean' should not delete
+### anything that needs to exist in order to run `configure' and then
+### begin to build the program.
+maintainer-clean: FRC
+ (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
+ -(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
+ ${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
### says GCC supports it, and that's where the configuration part of
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
- for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} extraclean); done
- -(cd lock; rm *)
- -rm config.status config-tmp-*
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
+ ${top_distclean}
+ -rm config-tmp-*
-rm -f *~ \#*
-
-TAGS tags: lib-src
- (cd ${srcdir} ; lib-src/etags --output=./src/TAGS \
- src/*.[ch] lisp/*.el lisp/term/*.el)
+### Unlocking and relocking. The idea of these productions is to reduce
+### hassles when installing an incremental tar of Emacs. Do `make unlock'
+### before unlocking the file to take the write locks off all sources so
+### that tar xvof will overwrite them without fuss. Then do `make relock'
+### afterward so that VC mode will know which files should be checked in
+### if you want to mung them.
+###
+### Note: it's no disaster if these productions miss a file or two; tar
+### and VC will swiftly let you know if this happens, and it is easily
+### corrected.
+SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \
+ README configure make-dist move-if-change
+
+.PHONY: unlock relock
+
+unlock:
+ chmod u+w $(SOURCES)
+ -(cd elisp; chmod u+w Makefile README *.texi)
+ (cd etc; $(MAKE) $(MFLAGS) unlock)
+ (cd lib-src; $(MAKE) $(MFLAGS) unlock)
+ (cd lisp; $(MAKE) $(MFLAGS) unlock)
+ (cd lisp/term; chmod u+w README *.el)
+ (cd man; chmod u+w *texi* ChangeLog split-man)
+ (cd oldXMenu; chmod u+w *.[ch] Makefile README)
+ (cd lwlib; chmod u+w *.[ch] Makefile README)
+ (cd src; $(MAKE) $(MFLAGS) unlock)
+
+relock:
+ chmod u-w $(SOURCES)
+ -(cd elisp; chmod u-w Makefile README *.texi)
+ (cd etc; $(MAKE) $(MFLAGS) relock)
+ (cd lib-src; $(MAKE) $(MFLAGS) relock)
+ (cd lisp; $(MAKE) $(MFLAGS) relock)
+ (cd lisp/term; chmod u+w README *.el)
+ (cd man; chmod u+w *texi* ChangeLog split-man)
+ (cd oldXMenu; chmod u+w *.[ch] Makefile README)
+ (cd lwlib; chmod u+w *.[ch] Makefile README)
+ (cd src; $(MAKE) $(MFLAGS) relock)
+
+TAGS tags: lib-src src
+ # The src subdir knows how to do the right thing
+ # even when the build directory and source dir are different.
+ cd src; $(MAKE) tags
check:
@echo "We don't have any tests for GNU Emacs yet."
dist:
- cd ${srcdir}; make-dist
+ cd ${srcdir}; ./make-dist
+
+.PHONY: info dvi dist check html
+force-info:
+info: force-info
+ # Note that man/Makefile knows how to
+ # put the info files in $(srcdir),
+ # so we can do ok running make in the build dir.
+ (cd man; $(MAKE) $(MFLAGS) info)
+dvi:
+ (cd man; $(MAKE) $(MFLAGS) dvi)
+
+#### Bootstrapping.
+
+### This is meant for Emacs maintainers only. It first cleans the
+### lisp subdirectory, removing all compiled Lisp files. Then a
+### special emacs executable is built from Lisp sources, which is then
+### used to compile Lisp files. The last step is a "normal" make.
+
+bootstrap: clean bootstrap-lisp-1 bootstrap-src bootstrap-lisp clean all info
+
+bootstrap-lisp-1:
+ (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
+
+bootstrap-lisp:
+ -(cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs)
+
+bootstrap-src:
+ (cd src; $(MAKE) $(MFLAGS) bootstrap)