Change all occurrences of "Mouse-[0-9]" to "mouse-[0-9]"

[gnu-emacs] / doc / misc / mh-e.texi

diff --git a/doc/misc/mh-e.texi b/doc/misc/mh-e.texi
index d1fd8f76118222c983d092bb98063485eedd4537..c48e4a40ea91dd0362f82bc48b2682f7f195dd2d 100644 (file)
--- a/doc/misc/mh-e.texi
+++ b/doc/misc/mh-e.texi
@@ -1566,7 +1566,7 @@ M-x mh-rmail @key{RET} bob @key{RET}}). @xref{Folders}.}.
 @findex display-time
 @vindex read-mail-command
 
 @findex display-time
 @vindex read-mail-command
 

-There are some commands that need to read mail, such as @kbd{Mouse-2}
+There are some commands that need to read mail, such as @kbd{mouse-2}

 over the @samp{Mail} button that @code{display-time} adds to the mode
 line. You can configure Emacs to have these commands use MH-E by
 setting the option @code{read-mail-command} to @samp{mh-rmail}.
 over the @samp{Mail} button that @code{display-time} adds to the mode
 line. You can configure Emacs to have these commands use MH-E by
 setting the option @code{read-mail-command} to @samp{mh-rmail}.


@@ -1835,9 +1835,9 @@ minibuffer (@code{mh-prefix-help}).
 Unpack message created with @command{uudecode} or @command{shar}
 (@code{mh-store-msg}).
 @c -------------------------
 Unpack message created with @command{uudecode} or @command{shar}
 (@code{mh-store-msg}).
 @c -------------------------

-@kindex Mouse-2
+@kindex mouse-2

 @findex mh-show-mouse
 @findex mh-show-mouse

-@item Mouse-2
+@item mouse-2

 Move point to mouse event and show message (@code{mh-show-mouse}).
 @end table
 
 Move point to mouse event and show message (@code{mh-show-mouse}).
 @end table
 


@@ -1845,12 +1845,12 @@ Within the MH-Show buffer, the following command is defined.
 
 @table @kbd
 @kindex @key{RET}
 
 @table @kbd
 @kindex @key{RET}

-@kindex Mouse-1
-@kindex Mouse-2
+@kindex mouse-1
+@kindex mouse-2

 @findex mh-press-button
 @item @key{RET}
 @findex mh-press-button
 @item @key{RET}

-@itemx Mouse-1
-@itemx Mouse-2
+@itemx mouse-1
+@itemx mouse-2

 View contents of button (@code{mh-press-button}).
 @end table
 
 View contents of button (@code{mh-press-button}).
 @end table
 


@@ -2022,10 +2022,10 @@ detail in the following sections.
 @kindex @key{BS}
 @kindex @key{RET}
 @kindex @key{SPC}
 @kindex @key{BS}
 @kindex @key{RET}
 @kindex @key{SPC}

-@kindex Mouse-2
+@kindex mouse-2

 
 The command @key{RET} (@code{mh-show}) displays the message that the
 
 The command @key{RET} (@code{mh-show}) displays the message that the

-cursor is on while @kbd{Mouse-2} (@code{mh-show-mouse}) displays the
+cursor is on while @kbd{mouse-2} (@code{mh-show-mouse}) displays the

 message that the mouse cursor is on. If the message is already
 displayed, it scrolls to the beginning of the message. Use @key{SPC}
 (@code{mh-page-msg}) and @key{BS} (@code{mh-previous-page}) to move
 message that the mouse cursor is on. If the message is already
 displayed, it scrolls to the beginning of the message. Use @key{SPC}
 (@code{mh-page-msg}) and @key{BS} (@code{mh-previous-page}) to move


@@ -2201,13 +2201,13 @@ highlighting of citations entirely, choose @samp{None}.
 @cindex links, following
 @findex goto-address-at-point
 @kindex C-c @key{RET}
 @cindex links, following
 @findex goto-address-at-point
 @kindex C-c @key{RET}

-@kindex Mouse-2
+@kindex mouse-2

 @vindex goto-address-highlight-p
 
 Email addresses and URLs in the message are highlighted if the option
 @code{goto-address-highlight-p} is on, which it is by default. To view
 the web page for a highlighted URL or to send a message using a
 @vindex goto-address-highlight-p
 
 Email addresses and URLs in the message are highlighted if the option
 @code{goto-address-highlight-p} is on, which it is by default. To view
 the web page for a highlighted URL or to send a message using a

-highlighted email address, use @kbd{Mouse-2} or @kbd{C-c @key{RET}}
+highlighted email address, use @kbd{mouse-2} or @kbd{C-c @key{RET}}

 (@code{goto-address-at-point}). @xref{Sending Mail}, to see how to
 configure Emacs to send the message using MH-E.
 
 (@code{goto-address-at-point}). @xref{Sending Mail}, to see how to
 configure Emacs to send the message using MH-E.
 


@@ -2337,11 +2337,11 @@ Attachments in MH-E are indicated by @dfn{buttons} like this:
 @kindex @key{RET}
 @kindex K @key{TAB}
 @kindex K S-@key{TAB}
 @kindex @key{RET}
 @kindex K @key{TAB}
 @kindex K S-@key{TAB}

-@kindex Mouse-1
-@kindex Mouse-2
+@kindex mouse-1
+@kindex mouse-2

 
 

-To view the contents of the button, use either @kbd{Mouse-1} or
-@kbd{Mouse-2} on the button or @key{RET} (@code{mh-press-button}) when
+To view the contents of the button, use either @kbd{mouse-1} or
+@kbd{mouse-2} on the button or @key{RET} (@code{mh-press-button}) when

 the cursor is over the button. This command is a toggle so if you use
 it again on the same attachment, it is hidden. If Emacs does not know
 how to display the attachment, then Emacs offers to save the
 the cursor is over the button. This command is a toggle so if you use
 it again on the same attachment, it is hidden. If Emacs does not know
 how to display the attachment, then Emacs offers to save the


@@ -2561,11 +2561,11 @@ includes the results of a quick poll of MH-E users from 2005-12-23.
 @table @asis
 @cindex browser, @samp{w3m}
 @cindex @samp{w3m}
 @table @asis
 @cindex browser, @samp{w3m}
 @cindex @samp{w3m}

-@kindex Mouse-2
+@kindex mouse-2

 @item @samp{w3m} 7
 The @samp{w3m} browser requires an external program. It's quick,
 produces pretty nice output, and best of all, it's the only browser
 @item @samp{w3m} 7
 The @samp{w3m} browser requires an external program. It's quick,
 produces pretty nice output, and best of all, it's the only browser

-that highlights links. These can be clicked with @kbd{Mouse-2} to view
+that highlights links. These can be clicked with @kbd{mouse-2} to view

 the content of the link in @samp{w3m}. The @samp{w3m} browser handles
 tables well and actually respects the table's width parameter (which
 can cause text to wrap if the author didn't anticipate that the page
 the content of the link in @samp{w3m}. The @samp{w3m} browser handles
 tables well and actually respects the table's width parameter (which
 can cause text to wrap if the author didn't anticipate that the page


@@ -2650,7 +2650,7 @@ documentation for the Gnus command @kbd{W h} (see section
 @cindex @file{.emacs}
 @cindex files, @file{.emacs}
 @findex browse-url-at-mouse
 @cindex @file{.emacs}
 @cindex files, @file{.emacs}
 @findex browse-url-at-mouse

-@kindex S-Mouse-2
+@kindex S-mouse-2

 
 A useful key binding that you can add to @file{~/.emacs} is the
 following which displays an HTML link or textual URL in an external
 
 A useful key binding that you can add to @file{~/.emacs} is the
 following which displays an HTML link or textual URL in an external


@@ -6261,7 +6261,7 @@ containing the value for the field is given.
 @findex mh-visit-folder
 @kindex F v
 @kindex M-x speedbar
 @findex mh-visit-folder
 @kindex F v
 @kindex M-x speedbar

-@kindex Mouse-2
+@kindex mouse-2

 
 You can also use the speedbar
 @ifnothtml
 
 You can also use the speedbar
 @ifnothtml


@@ -6275,7 +6275,7 @@ Speedbar Frames} in @cite{The GNU Emacs Manual})
 to view your folders. To bring up the speedbar, run @kbd{M-x speedbar
 @key{RET}}. You will see a new frame appear with all of your MH
 folders. Folders with unseen messages appear in boldface. Click on a
 to view your folders. To bring up the speedbar, run @kbd{M-x speedbar
 @key{RET}}. You will see a new frame appear with all of your MH
 folders. Folders with unseen messages appear in boldface. Click on a

-folder name with @kbd{Mouse-2} to visit that folder in a similar
+folder name with @kbd{mouse-2} to visit that folder in a similar

 fashion to the command @kbd{F v} (@code{mh-visit-folder})
 (@pxref{Folders}). Click on the @samp{+} icon to expand and view the
 sub-folders of that folder.
 fashion to the command @kbd{F v} (@code{mh-visit-folder})
 (@pxref{Folders}). Click on the @samp{+} icon to expand and view the
 sub-folders of that folder.


@@ -6310,9 +6310,9 @@ count before the next automatic update (@code{mh-speed-refresh}).
 
 @findex delete-frame
 @kindex C-x 5 0
 
 @findex delete-frame
 @kindex C-x 5 0

-@kindex Mouse-3
+@kindex mouse-3

 
 

-You can click on @kbd{Mouse-3} to bring up a context menu that
+You can click on @kbd{mouse-3} to bring up a context menu that

 contains these items. Dismiss the speedbar with @kbd{C-x 5 0}
 (@code{delete-frame}).
 
 contains these items. Dismiss the speedbar with @kbd{C-x 5 0}
 (@code{delete-frame}).