@setfilename ../info/viper
@copying
-Copyright @copyright{} 1995, 1996, 1997, 2001, 2002 Free Software
-Foundation, Inc.
+Copyright @copyright{} 1995, 1996, 1997, 2001, 2002, 2003, 2004,
+2005, 2006 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
+under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with the Front-Cover texts being ``A GNU
Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
<jshawkin@@eecs.umich.edu> has provided a set of customizations, which
enables additional Emacs bindings under Viper. These customizations can be
included in your @file{~/.viper} file and are found at the following URL:
-@file{http://www.eecs.umich.edu/~jshawkin/viper-sample}.
+@file{http://traeki.freeshell.org/files/viper-sample}.
@menu
* Emacs Preliminaries:: Basic concepts in Emacs.
@dfn{buffer} that usually has the same name as the file. Buffers are also used
for other purposes, such as shell interfaces, directory editing, etc.
@xref{Dired,,Directory Editor,emacs,The
-Gnu Emacs Manual}, for an example.@refill
+GNU Emacs Manual}, for an example.@refill
A buffer has a distinguished position called the @dfn{point}.
A @dfn{point} is always between 2 characters, and is @dfn{looking at}
Furthermore, Viper lets Ex-style commands to work on the current region.
This is done by typing a digit argument before @kbd{:}. For instance,
-typing @kbd{1:} will propmt you with something like @emph{:123,135},
+typing @kbd{1:} will prompt you with something like @emph{:123,135},
assuming that the current region starts at line 123 and ends at line
135. There is no need to type the line numbers, since Viper inserts them
automatically in front of the Ex command.
In Viper, Ex commands can be made to work on the current Emacs region.
This is done by typing a digit argument before @kbd{:}.
-For instance, typing @kbd{1:} will propmt you with something like
+For instance, typing @kbd{1:} will prompt you with something like
@emph{:123,135}, assuming that the current region starts at line 123 and
ends at line 135. There is no need to type the line numbers, since Viper
inserts them automatically in front of the Ex command.
sequences that begin with @kbd{C-x} and @kbd{C-c}.
There is also a key that lets you temporarily escape to Vi command state
-from Emacs or Insert states: typing @kbd{C-c \} will let you execute a
-single Vi command while staying in Viper's Emacs or Insert state.
-In Insert state, the same can also be achieved by typing @kbd{C-z}.
+from the Insert state: typing @kbd{C-z} will let you execute a
+single Vi command while staying in Viper's Insert state.
@node Vi State, Insert State, Emacs State, States in Viper
hit @kbd{C-x} followed by @kbd{2}, then the current window will be split
into 2. Except for novice users, @kbd{C-c} is also set to execute an Emacs
command from the current major mode. @key{ESC} will do the same, if you
-configure @key{ESC} as Meta by setting @code{viper-no-multiple-ESC} to nil
+configure @key{ESC} as Meta by setting @code{viper-no-multiple-ESC} to @code{nil}
in @file{.viper}. @xref{Customization}. @kbd{C-\} in Insert, Replace, or Vi
states will make Emacs think @kbd{Meta} has been hit.@refill
@item \
Setting this variable too high may slow down your typing. Setting it too
low may make it hard to type macros quickly enough.
-@item viper-translate-all-ESC-keysequences t on tty, nil on windowing display
+@item viper-translate-all-ESC-keysequences @code{t} on tty, @code{nil} on windowing display
Normally, Viper lets Emacs translate only those ESC key sequences that are
defined in the low-level key-translation-map or function-key-map, such as those
emitted by the arrow and function keys. Other sequences, e.g., @kbd{\\e/}, are
This permits you to use @kbd{ESC} as a meta key in insert mode. For instance,
hitting @kbd{ESC x} fast would have the effect of typing @kbd{M-x}.
If your dumb terminal is not so dumb and understands the meta key, then you
-probably will be better off setting this variable to nil. Try and see which
+probably will be better off setting this variable to @code{nil}. Try and see which
way suits you best.
@item viper-ex-style-motion t
Set this to @code{nil}, if you want @kbd{l,h} to cross
at the beginning of a line in Insert state, @key{X} and @key{x} to delete
characters across lines in Vi command state, etc.
@item viper-ESC-moves-cursor-back t
-It t, cursor moves back 1 character when switching from insert state to vi
-state. If nil, the cursor stays where it was before the switch.
+It @code{t}, cursor moves back 1 character when switching from insert state to vi
+state. If @code{nil}, the cursor stays where it was before the switch.
@item viper-always t
@code{t} means: leave it to Viper to decide when a buffer must be brought
up in Vi state,
@vindex @code{viper-insert-state-cursor-color}
If set to a valid color, this will be the cursor color when Viper is in
insert state.
+@item viper-emacs-state-cursor-color nil
+@vindex @code{viper-emacs-state-cursor-color}
+If set to a valid color, this will be the cursor color when Viper is in
+emacs state.
@item viper-replace-region-end-delimiter "$"
A string used to mark the end of replacement regions. It is used only on
-TTYs or if @code{viper-use-replace-region-delimiters} is non-nil.
+TTYs or if @code{viper-use-replace-region-delimiters} is non-@code{nil}.
@item viper-replace-region-start-delimiter ""
A string used to mark the beginning of replacement regions. It is used
-only on TTYs or if @code{viper-use-replace-region-delimiters} is non-nil.
+only on TTYs or if @code{viper-use-replace-region-delimiters} is non-@code{nil}.
@item viper-use-replace-region-delimiters
-If non-nil, Viper will always use @code{viper-replace-region-end-delimiter} and
+If non-@code{nil}, Viper will always use @code{viper-replace-region-end-delimiter} and
@code{viper-replace-region-start-delimiter} to delimit replacement regions,
even on color displays (where this is unnecessary). By default, this
-variable is non-nil only on TTYs or monochrome displays.
+variable is non-@code{nil} only on TTYs or monochrome displays.
@item viper-allow-multiline-replace-regions t
-If non-nil, multi-line text replacement regions, such as those produced by
+If non-@code{nil}, multi-line text replacement regions, such as those produced by
commands @kbd{c55w}, @kbd{3C}, etc., will stay around until the user exits
the replacement mode. In this variable is set to @code{nil}, Viper will
emulate the standard Vi behavior, which supports only intra-line
bind common keys to specialized commands. This might make sense for modes
that bind only a small number of common keys. For instance, Viper subverts
the Shell mode by changing the bindings for @kbd{C-m} and @kbd{C-d} using
-@code{viper-add-local-keys} described in section on customization
+@code{viper-add-local-keys} described in the section on customization
(@pxref{Customization}).
In some cases, some @emph{minor} modes might override certain essential
-bindings in Vi command state. This is not a big priblem because this
+bindings in Vi command state. This is not a big problem because this
can happen only in the beginning, when the minor mode kicks in. Typing
@code{M-x viper-mode} will correct the situation. Viper knows about
several such minor modes and takes care of them, so the above trick
is usually not necessary. If you find that some minor mode, e.g.,
-@code{nasty-mode.el} interferes with Viper, putting the following in
+@code{nasty-mode} interferes with Viper, putting the following in
@file{.viper} should fix the problem:
@lisp
(viper-harness-minor-mode "nasty-mode")
It may not be always obvious which minor mode is at fault. The only
guidance here is to look into the file that defines the minor mode you are
-suspecting, say @code{nasty-mode.el}, and see if it has a variable called
+suspecting, say @file{nasty-mode.el}, and see if it has a variable called
@code{nasty-mode-map}. Then check if there is a statement of the form
@lisp
(define-key nasty-mode-map key function)
suspicion is wrong, no harm is done if you harness a minor mode that
doesn't need to be harnessed.
+It is recommended to harness even those minor modes that don't override
+Viper keys, but still have their own keymaps. A general way to
+make a minor mode, @code{my-mode},
+compatible with Viper is to have the file @file{my-mode.el} include the following code:
+
+@lisp
+(when (fboundp 'viper-harness-minor-mode)
+ (let ((lib (file-name-sans-extension
+ (file-name-nondirectory load-file-name))))
+ (viper-harness-minor-mode lib)))
+@end lisp
+
@vindex @code{viper-want-emacs-keys-in-vi}
@vindex @code{viper-want-emacs-keys-in-insert}
@vindex @code{viper-always}
@end example
@findex @code{viper-set-searchstyle-toggling-macros}
+If you don't like this feature as a default, but would still like to have
+it in some major modes, you can do so by first unsetting it globally, as
+shown above, and then setting it in the desired major modes as follows:
+@example
+(viper-set-searchstyle-toggling-macros nil 'c-mode)
+(viper-set-searchstyle-toggling-macros nil 'lisp-mode)
+@end example
+
@item Vi-isms in Emacs state
Some people find it useful to use the Vi-style search key, `/', to invoke
search in modes which Viper leaves in emacs-state. These modes are:
-@code{dired-mode}, @code{mh-folder-mode}, @code{gnus-group-mode},
-@code{gnus-summary-mode}, @code{Info-mode}, and @code{Buffer-menu-mode}
+@code{dired-mode}, @code{mh-folder-mode},
+@code{Info-mode}, and @code{Buffer-menu-mode}
(more may be added in the future). So, in the above modes, Viper binds `/'
so that it will behave Vi-style. Furthermore, in those major modes, Viper
binds `:' to invoke ex-style commands, like in vi-state. And, as described
To unbind the macros `//' and `///' for a major mode where you feel they
are undesirable, execute @code{viper-set-emacs-state-searchstyle-macros} with a
-non-nil argument. This can be done either interactively, by supplying a
+non-@code{nil} argument. This can be done either interactively, by supplying a
prefix argument, or by placing
@example
(viper-set-emacs-state-searchstyle-macros 'undefine)
If a document consists of several files we can designate one of them as a
master and put the following at the end of that file:
@lisp
-;;; Local Variables:
-;;; eval: (viper-setup-master-buffer "file1" "file2" "file3" "file4")
-;;; End:
+;; Local Variables:
+;; eval: (viper-setup-master-buffer "file1" "file2" "file3" "file4")
+;; End:
@end lisp
@noindent
where @code{file1} to @code{file4} are names of files related to the master
focus on relevant files only.
Note that only the master file needs to have the aforementioned block of
-commands. Also, ";;;" above can be replaced by some other
+commands. Also, ";;" above can be replaced by some other
markers. Semicolon is good for Lisp programs, since it is considered a
comment designator there. For LaTeX, this could be "%%%", and for C the
above block should be commented out.
Even though these commands are sometimes useful, they are no substitute for
the powerful @emph{tag table} facility of Emacs. Viper's @kbd{:tag} command
in a primitive interface to Emacs tags. @xref{Tags,Tags,Tags,emacs,
-The Gnu Emacs Manual}, for more information on tags.
+The GNU Emacs Manual}, for more information on tags.
The following two commands are normally bound to a mouse click and are part
of Viper. They work only if Emacs runs as an application under X
(setq viper-mouse-insert-key '(meta 2))
@end lisp
If you want to bind mouse-insert to an action even if this action is
-already taked for other purposes in Emacs, then you should add this command
+already taken for other purposes in Emacs, then you should add this command
to @code{~/.viper}, after setting @code{viper-mouse-insert-key}:
@lisp
(viper-bind-mouse-insert-key 'force)
Finally, we note that Viper's Ex-style commands can be made to work on the
current Emacs region. This is done by typing a digit argument before
-@kbd{:}. For instance, typing @kbd{1:} will propmt you with something like
+@kbd{:}. For instance, typing @kbd{1:} will prompt you with something like
@emph{:123,135}, assuming that the current region starts at line 123 and
ends at line 135. There is no need to type the line numbers, since Viper
inserts them automatically in front of the Ex command.
Find the next bracket/parenthesis/brace and go to its match.
By default, Viper ignores brackets/parentheses/braces that occur inside
parentheses. You can change this by setting
-@code{viper-parse-sexp-ignore-comments} to nil in your @file{.viper} file.
+@code{viper-parse-sexp-ignore-comments} to @code{nil} in your @file{.viper} file.
This option can also be toggled interactively if you quickly hit @kbd{%%%}.
This latter feature is implemented as a vi-style keyboard macro. If you
gvr@@halcyon.com (George V.@: Reilly),
hatazaki@@bach.convex.com (Takao Hatazaki),
hpz@@ibmhpz.aug.ipp-garching.mpg.de (Hans-Peter Zehrfeld),
+irie@@t.email.ne.jp (Irie Tetsuya),
jackr@@dblues.engr.sgi.com (Jack Repenning),
jamesm@@bga.com (D.J.@: Miller II),
jjm@@hplb.hpl.hp.com (Jean-Jacques Moreau),
kwzh@@gnu.org (Karl Heuer),
lindstro@@biostat.wisc.edu (Mary Lindstrom),
lektu@@terra.es (Juanma Barranquero),
+lennart.borgman.073@@student.lu.se (Lennart Borgman),
minakaji@@osaka.email.ne.jp (Mikio Nakajima),
Mark.Bordas@@East.Sun.COM (Mark Bordas),
meyering@@comco.com (Jim Meyering),
simonb@@prl.philips.co.uk (Simon Blanchard),
spadgett1@@nc.rr.com (Samuel Padgett),
stephen@@farrell.org (Stephen Farrell),
+storm@@cua.dk (Kim F. Storm),
sudish@@MindSpring.COM (Sudish Joseph),
schwab@@issan.informatik.uni-dortmund.de (Andreas Schwab)
terra@@diku.dk (Morten Welinder),