-;;; buff-menu.el --- buffer menu main function and support functions.
+;;; buff-menu.el --- buffer menu main function and support functions -*- coding:utf-8 -*-
-;; Copyright (C) 1985, 1986, 1987, 1993, 1994 Free Software Foundation, Inc.
+;; Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 2000, 2001, 2002, 2003,
+;; 2004, 2005, 2006 Free Software Foundation, Inc.
;; Maintainer: FSF
+;; Keywords: convenience
;; This file is part of GNU Emacs.
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING. If not, write to
-;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+;; along with GNU Emacs; see the file COPYING. If not, write to the
+;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+;; Boston, MA 02110-1301, USA.
;;; Commentary:
;; Edit, delete, or change attributes of all currently active Emacs
;; buffers from a list summarizing their state. A good way to browse
;; any special or scratch buffers you have loaded, since you can't find
-;; them by filename. The single entry point is `Buffer-menu-mode',
+;; them by filename. The single entry point is `list-buffers',
;; normally bound to C-x C-b.
;;; Change Log:
+;; Buffer-menu-view: New function
+;; Buffer-menu-view-other-window: New function
+
;; Merged by esr with recent mods to Emacs 19 buff-menu, 23 Mar 1993
;;
;; Modified by Bob Weiner, Motorola, Inc., 4/14/89
;; Based on FSF code dating back to 1985.
;;; Code:
-
-;;;Not needed, now that q is now just quit and Buffer-menu-select is v.
-;;;(defvar Buffer-menu-window-config nil
-;;; "Window configuration saved from entry to `buffer-menu'.")
-
-; Put buffer *Buffer List* into proper mode right away
-; so that from now on even list-buffers is enough to get a buffer menu.
-
-(defvar Buffer-menu-buffer-column nil)
-(defvar Buffer-menu-mode-map nil "")
+;;Trying to preserve the old window configuration works well in
+;;simple scenarios, when you enter the buffer menu, use it, and exit it.
+;;But it does strange things when you switch back to the buffer list buffer
+;;with C-x b, later on, when the window configuration is different.
+;;The choice seems to be, either restore the window configuration
+;;in all cases, or in no cases.
+;;I decided it was better not to restore the window config at all. -- rms.
+
+;;But since then, I changed buffer-menu to use the selected window,
+;;so q now once again goes back to the previous window configuration.
+
+;;(defvar Buffer-menu-window-config nil
+;; "Window configuration saved from entry to `buffer-menu'.")
+
+;; Put buffer *Buffer List* into proper mode right away
+;; so that from now on even list-buffers is enough to get a buffer menu.
+
+(defgroup Buffer-menu nil
+ "Show a menu of all buffers in a buffer."
+ :group 'tools
+ :group 'convenience)
+
+(defcustom Buffer-menu-use-header-line t
+ "*Non-nil means to use an immovable header-line."
+ :type 'boolean
+ :group 'Buffer-menu)
+
+(defface buffer-menu-buffer
+ '((t (:weight bold)))
+ "Face used to highlight buffer names in the buffer menu."
+ :group 'Buffer-menu)
+(put 'Buffer-menu-buffer 'face-alias 'buffer-menu-buffer)
+
+(defcustom Buffer-menu-buffer+size-width 26
+ "*How wide to jointly make the buffer name and size columns."
+ :type 'number
+ :group 'Buffer-menu)
+
+(defcustom Buffer-menu-mode-width 16
+ "*How wide to make the mode name column."
+ :type 'number
+ :group 'Buffer-menu)
+
+(defcustom Buffer-menu-use-frame-buffer-list t
+ "If non-nil, the Buffer Menu uses the selected frame's buffer list.
+Buffers that were never selected in that frame are listed at the end.
+If the value is nil, the Buffer Menu uses the global buffer list.
+This variable matters if the Buffer Menu is sorted by visited order,
+as it is by default."
+ :type 'boolean
+ :group 'Buffer-menu
+ :version "22.1")
+
+;; This should get updated & resorted when you click on a column heading
+(defvar Buffer-menu-sort-column nil
+ "2 for sorting by buffer names. 5 for sorting by file names.
+nil for default sorting by visited order.")
+
+(defconst Buffer-menu-buffer-column 4)
+
+(defvar Buffer-menu-mode-map nil
+ "Local keymap for `Buffer-menu-mode' buffers.")
+
+(defvar Buffer-menu-files-only nil
+ "Non-nil if the current buffer-menu lists only file buffers.
+This variable determines whether reverting the buffer lists only
+file buffers. It affects both manual reverting and reverting by
+Auto Revert Mode.")
+
+(make-variable-buffer-local 'Buffer-menu-files-only)
(if Buffer-menu-mode-map
()
(setq Buffer-menu-mode-map (make-keymap))
(suppress-keymap Buffer-menu-mode-map t)
- (define-key Buffer-menu-mode-map "q" 'Buffer-menu-quit)
+ (define-key Buffer-menu-mode-map "q" 'quit-window)
(define-key Buffer-menu-mode-map "v" 'Buffer-menu-select)
(define-key Buffer-menu-mode-map "2" 'Buffer-menu-2-window)
(define-key Buffer-menu-mode-map "1" 'Buffer-menu-1-window)
(define-key Buffer-menu-mode-map "f" 'Buffer-menu-this-window)
+ (define-key Buffer-menu-mode-map "e" 'Buffer-menu-this-window)
(define-key Buffer-menu-mode-map "\C-m" 'Buffer-menu-this-window)
(define-key Buffer-menu-mode-map "o" 'Buffer-menu-other-window)
(define-key Buffer-menu-mode-map "\C-o" 'Buffer-menu-switch-other-window)
(define-key Buffer-menu-mode-map "m" 'Buffer-menu-mark)
(define-key Buffer-menu-mode-map "t" 'Buffer-menu-visit-tags-table)
(define-key Buffer-menu-mode-map "%" 'Buffer-menu-toggle-read-only)
- (define-key Buffer-menu-mode-map "g" 'revert-buffer)
+ (define-key Buffer-menu-mode-map "b" 'Buffer-menu-bury)
+ (define-key Buffer-menu-mode-map "g" 'Buffer-menu-revert)
+ (define-key Buffer-menu-mode-map "V" 'Buffer-menu-view)
+ (define-key Buffer-menu-mode-map "T" 'Buffer-menu-toggle-files-only)
(define-key Buffer-menu-mode-map [mouse-2] 'Buffer-menu-mouse-select)
+ (define-key Buffer-menu-mode-map [follow-link] 'mouse-face)
)
;; Buffer Menu mode is suitable only for specially formatted data.
\\[Buffer-menu-this-window] -- select current line's buffer in place of the buffer menu.
\\[Buffer-menu-other-window] -- select that buffer in another window,
so the buffer menu buffer remains visible in its window.
+\\[Buffer-menu-view] -- select current line's buffer, but in view-mode.
+\\[Buffer-menu-view-other-window] -- select that buffer in
+ another window, in view-mode.
\\[Buffer-menu-switch-other-window] -- make another window display that buffer.
\\[Buffer-menu-mark] -- mark current line's buffer to be displayed.
\\[Buffer-menu-select] -- select current line's buffer.
\\[Buffer-menu-unmark] -- remove all kinds of marks from current line.
With prefix argument, also move up one line.
\\[Buffer-menu-backup-unmark] -- back up a line and remove marks.
-\\[Buffer-menu-toggle-read-only] -- toggle read-only status of buffer on this line."
+\\[Buffer-menu-toggle-read-only] -- toggle read-only status of buffer on this line.
+\\[Buffer-menu-revert] -- update the list of buffers.
+\\[Buffer-menu-toggle-files-only] -- toggle whether the menu displays only file buffers.
+\\[Buffer-menu-bury] -- bury the buffer listed on this line."
(kill-all-local-variables)
(use-local-map Buffer-menu-mode-map)
(setq major-mode 'Buffer-menu-mode)
(setq mode-name "Buffer Menu")
- (save-excursion
- (goto-char (point-min))
- (search-forward "Buffer")
- (backward-word 1)
- (setq Buffer-menu-buffer-column (current-column))
- (forward-line 2)
- (while (not (eobp))
- (let ((where (Buffer-menu-buffer-name-position)))
- (put-text-property (car where) (cdr where) 'mouse-face 'highlight))
- (forward-line 1)))
- (make-local-variable 'revert-buffer-function)
- (setq revert-buffer-function 'Buffer-menu-revert-function)
+ (set (make-local-variable 'revert-buffer-function)
+ 'Buffer-menu-revert-function)
+ (set (make-local-variable 'buffer-stale-function)
+ #'(lambda (&optional noconfirm) 'fast))
(setq truncate-lines t)
(setq buffer-read-only t)
- (run-hooks 'buffer-menu-mode-hook))
+ (run-mode-hooks 'buffer-menu-mode-hook))
+
+;; This function exists so we can make the doc string of Buffer-menu-mode
+;; look nice.
+(defun Buffer-menu-revert ()
+ "Update the list of buffers."
+ (interactive)
+ (revert-buffer))
(defun Buffer-menu-revert-function (ignore1 ignore2)
- (list-buffers))
+ (or (eq buffer-undo-list t)
+ (setq buffer-undo-list nil))
+ ;; We can not use save-excursion here. The buffer gets erased.
+ (let ((opoint (point))
+ (eobp (eobp))
+ (ocol (current-column))
+ (oline (progn (move-to-column 4)
+ (get-text-property (point) 'buffer)))
+ (prop (point-min))
+ ;; do not make undo records for the reversion.
+ (buffer-undo-list t))
+ ;; We can be called by Auto Revert Mode with the "*Buffer Menu*"
+ ;; temporarily the current buffer. Make sure that the
+ ;; interactively current buffer is correctly identified with a `.'
+ ;; by `list-buffers-noselect'.
+ (with-current-buffer (window-buffer)
+ (list-buffers-noselect Buffer-menu-files-only))
+ (if oline
+ (while (setq prop (next-single-property-change prop 'buffer))
+ (when (eq (get-text-property prop 'buffer) oline)
+ (goto-char prop)
+ (move-to-column ocol)))
+ (goto-char (if eobp (point-max) opoint)))))
+
+(defun Buffer-menu-toggle-files-only (arg)
+ "Toggle whether the current buffer-menu displays only file buffers.
+With a positive ARG display only file buffers. With zero or
+negative ARG, display other buffers as well."
+ (interactive "P")
+ (setq Buffer-menu-files-only
+ (cond ((not arg) (not Buffer-menu-files-only))
+ ((> (prefix-numeric-value arg) 0) t)))
+ (revert-buffer))
+
\f
(defun Buffer-menu-buffer (error-if-non-existent-p)
"Return buffer described by this line of buffer menu."
- (let* ((where (Buffer-menu-buffer-name-position))
- (string (buffer-substring (car where) (cdr where))))
- (set-text-properties 0 (length string) nil string)
- (or (get-buffer string)
- (if error-if-non-existent-p
- (error "No buffer named \"%s\"" string)
- nil))))
-
-;; Find the start and end positions of the buffer name on this line.
-;; Returns a cons (START . END).
-(defun Buffer-menu-buffer-name-position ()
- (save-excursion
- (beginning-of-line)
- (forward-char Buffer-menu-buffer-column)
- (let ((start (point)))
- (re-search-forward "\t\\| ")
- (skip-chars-backward " \t")
- (cons start (point)))))
+ (let* ((where (save-excursion
+ (beginning-of-line)
+ (+ (point) Buffer-menu-buffer-column)))
+ (name (and (not (eobp)) (get-text-property where 'buffer-name)))
+ (buf (and (not (eobp)) (get-text-property where 'buffer))))
+ (if name
+ (or (get-buffer name)
+ (and buf (buffer-name buf) buf)
+ (if error-if-non-existent-p
+ (error "No buffer named `%s'" name)
+ nil))
+ (or (and buf (buffer-name buf) buf)
+ (if error-if-non-existent-p
+ (error "No buffer on this line")
+ nil)))))
\f
(defun buffer-menu (&optional arg)
"Make a menu of buffers so you can save, delete or select them.
With argument, show only buffers that are visiting files.
Type ? after invocation to get help on commands available.
-Type q immediately to make the buffer menu go away and to restore
-previous window configuration."
+Type q to remove the buffer menu from the display.
+
+The first column shows `>' for a buffer you have
+marked to be displayed, `D' for one you have marked for
+deletion, and `.' for the current buffer.
+
+The C column has a `.' for the buffer from which you came.
+The R column has a `%' if the buffer is read-only.
+The M column has a `*' if it is modified,
+or `S' if you have marked it for saving.
+After this come the buffer name, its size in characters,
+its major mode, and the visited file name (if any)."
(interactive "P")
;;; (setq Buffer-menu-window-config (current-window-configuration))
- (list-buffers arg)
- (let ((newpoint (save-excursion (set-buffer "*Buffer List*")
- (point))))
- (pop-to-buffer "*Buffer List*")
- (goto-char newpoint))
+ (switch-to-buffer (list-buffers-noselect arg))
(message
"Commands: d, s, x, u; f, o, 1, 2, m, v; ~, %%; q to quit; ? for help."))
-(defun Buffer-menu-quit ()
- "Quit the buffer menu."
- (interactive)
- (let ((buffer (current-buffer)))
- ;; Restore previous window configuration before displaying
- ;; selected buffers.
- (switch-to-buffer (other-buffer))
- (bury-buffer buffer)))
+(defun buffer-menu-other-window (&optional arg)
+ "Display a list of buffers in another window.
+With the buffer list buffer, you can save, delete or select the buffers.
+With argument, show only buffers that are visiting files.
+Type ? after invocation to get help on commands available.
+Type q to remove the buffer menu from the display.
+For more information, see the function `buffer-menu'."
+ (interactive "P")
+;;; (setq Buffer-menu-window-config (current-window-configuration))
+ (switch-to-buffer-other-window (list-buffers-noselect arg))
+ (message
+ "Commands: d, s, x, u; f, o, 1, 2, m, v; ~, %%; q to quit; ? for help."))
+
+(defun Buffer-menu-no-header ()
+ (beginning-of-line)
+ (if (or Buffer-menu-use-header-line
+ (not (eq (char-after) ?C)))
+ t
+ (ding)
+ (forward-line 1)
+ nil))
(defun Buffer-menu-mark ()
"Mark buffer on this line for being displayed by \\<Buffer-menu-mode-map>\\[Buffer-menu-select] command."
(interactive)
- (beginning-of-line)
- (if (looking-at " [-M]")
- (ding)
+ (when (Buffer-menu-no-header)
(let ((buffer-read-only nil))
(delete-char 1)
(insert ?>)
(defun Buffer-menu-unmark (&optional backup)
"Cancel all requested operations on buffer on this line and move down.
-Optional ARG means move up."
+Optional prefix arg means move up."
(interactive "P")
- (beginning-of-line)
- (if (looking-at " [-M]")
- (ding)
+ (when (Buffer-menu-no-header)
(let* ((buf (Buffer-menu-buffer t))
(mod (buffer-modified-p buf))
(readonly (save-excursion (set-buffer buf) buffer-read-only))
(buffer-read-only nil))
(delete-char 3)
- (insert (if readonly (if mod " *%" " %") (if mod " * " " ")))))
+ (insert (if readonly (if mod " %*" " % ") (if mod " *" " ")))))
(forward-line (if backup -1 1)))
(defun Buffer-menu-backup-unmark ()
Prefix arg is how many buffers to delete.
Negative arg means delete backwards."
(interactive "p")
- (beginning-of-line)
- (if (looking-at " [-M]") ;header lines
- (ding)
+ (when (Buffer-menu-no-header)
(let ((buffer-read-only nil))
(if (or (null arg) (= arg 0))
(setq arg 1))
(insert ?D)
(forward-line 1)
(setq arg (1- arg)))
- (while (< arg 0)
+ (while (and (< arg 0)
+ (Buffer-menu-no-header))
(delete-char 1)
(insert ?D)
(forward-line -1)
"Mark buffer on this line to be deleted by \\<Buffer-menu-mode-map>\\[Buffer-menu-execute] command
and then move up one line. Prefix arg means move that many lines."
(interactive "p")
- (Buffer-menu-delete (- (or arg 1)))
- (while (looking-at " [-M]")
- (forward-line 1)))
+ (Buffer-menu-delete (- (or arg 1))))
(defun Buffer-menu-save ()
"Mark buffer on this line to be saved by \\<Buffer-menu-mode-map>\\[Buffer-menu-execute] command."
(interactive)
- (beginning-of-line)
- (forward-char 1)
- (if (looking-at " [-M]") ;header lines
- (ding)
+ (when (Buffer-menu-no-header)
(let ((buffer-read-only nil))
+ (forward-char 2)
(delete-char 1)
(insert ?S)
(forward-line 1))))
(set-buffer-modified-p arg))
(save-excursion
(beginning-of-line)
- (forward-char 1)
- (if (= (char-after (point)) (if arg ? ?*))
+ (forward-char 2)
+ (if (= (char-after) (if arg ?\s ?*))
(let ((buffer-read-only nil))
(delete-char 1)
- (insert (if arg ?* ? ))))))
+ (insert (if arg ?* ?\s))))))
+
+(defun Buffer-menu-beginning ()
+ (goto-char (point-min))
+ (unless Buffer-menu-use-header-line
+ (forward-line)))
(defun Buffer-menu-execute ()
"Save and/or delete buffers marked with \\<Buffer-menu-mode-map>\\[Buffer-menu-save] or \\<Buffer-menu-mode-map>\\[Buffer-menu-delete] commands."
(interactive)
(save-excursion
- (goto-char (point-min))
- (forward-line 1)
- (while (re-search-forward "^.S" nil t)
+ (Buffer-menu-beginning)
+ (while (re-search-forward "^..S" nil t)
(let ((modp nil))
(save-excursion
(set-buffer (Buffer-menu-buffer t))
(setq modp (buffer-modified-p)))
(let ((buffer-read-only nil))
(delete-char -1)
- (insert (if modp ?* ? ))))))
+ (insert (if modp ?* ?\s))))))
(save-excursion
- (goto-char (point-min))
- (forward-line 1)
+ (Buffer-menu-beginning)
(let ((buff-menu-buffer (current-buffer))
(buffer-read-only nil))
- (while (search-forward "\nD" nil t)
+ (while (re-search-forward "^D" nil t)
(forward-char -1)
(let ((buf (Buffer-menu-buffer nil)))
(or (eq buf nil)
(eq buf buff-menu-buffer)
- (save-excursion (kill-buffer buf))))
- (if (Buffer-menu-buffer nil)
+ (save-excursion (kill-buffer buf)))
+ (if (and buf (buffer-name buf))
(progn (delete-char 1)
- (insert ? ))
+ (insert ?\s))
(delete-region (point) (progn (forward-line 1) (point)))
- (forward-char -1))))))
+ (unless (bobp)
+ (forward-char -1))))))))
(defun Buffer-menu-select ()
"Select this line's buffer; also display buffers marked with `>'.
-You can mark buffers with the \\<Buffer-menu-mode-map>\\[Buffer-menu-mark] command."
+You can mark buffers with the \\<Buffer-menu-mode-map>\\[Buffer-menu-mark] command.
+This command deletes and replaces all the previously existing windows
+in the selected frame."
(interactive)
(let ((buff (Buffer-menu-buffer t))
- (menu (current-buffer))
+ (menu (current-buffer))
(others ())
tem)
- (goto-char (point-min))
- (while (search-forward "\n>" nil t)
+ (Buffer-menu-beginning)
+ (while (re-search-forward "^>" nil t)
(setq tem (Buffer-menu-buffer t))
(let ((buffer-read-only nil))
(delete-char -1)
- (insert ?\ ))
+ (insert ?\s))
(or (eq tem buff) (memq tem others) (setq others (cons tem others))))
(setq others (nreverse others)
tem (/ (1- (frame-height)) (1+ (length others))))
(other-window 1) ;back to the beginning!
)))
+
\f
(defun Buffer-menu-visit-tags-table ()
"Visit the tags table in the buffer on this line. See `visit-tags-table'."
"Make the other window select this line's buffer.
The current window remains selected."
(interactive)
- (display-buffer (Buffer-menu-buffer t)))
+ (let ((pop-up-windows t)
+ same-window-buffer-names
+ same-window-regexps)
+ (display-buffer (Buffer-menu-buffer t))))
(defun Buffer-menu-2-window ()
"Select this line's buffer, with previous buffer in second window."
(interactive)
(let ((buff (Buffer-menu-buffer t))
(menu (current-buffer))
- (pop-up-windows t))
+ (pop-up-windows t)
+ same-window-buffer-names
+ same-window-regexps)
(delete-other-windows)
(switch-to-buffer (other-buffer))
(pop-to-buffer buff)
(save-excursion
(set-buffer (Buffer-menu-buffer t))
(vc-toggle-read-only)
- (setq char (if buffer-read-only ?% ? )))
+ (setq char (if buffer-read-only ?% ?\s)))
(save-excursion
(beginning-of-line)
- (forward-char 2)
+ (forward-char 1)
(if (/= (following-char) char)
(let (buffer-read-only)
(delete-char 1)
(insert char))))))
+(defun Buffer-menu-bury ()
+ "Bury the buffer listed on this line."
+ (interactive)
+ (when (Buffer-menu-no-header)
+ (save-excursion
+ (beginning-of-line)
+ (bury-buffer (Buffer-menu-buffer t))
+ (let ((line (buffer-substring (point) (progn (forward-line 1) (point))))
+ (buffer-read-only nil))
+ (delete-region (point) (progn (forward-line -1) (point)))
+ (goto-char (point-max))
+ (insert line))
+ (message "Buried buffer moved to the end"))))
+
+
+(defun Buffer-menu-view ()
+ "View this line's buffer in View mode."
+ (interactive)
+ (view-buffer (Buffer-menu-buffer t)))
+
+
+(defun Buffer-menu-view-other-window ()
+ "View this line's buffer in View mode in another window."
+ (interactive)
+ (view-buffer-other-window (Buffer-menu-buffer t)))
\f
(define-key ctl-x-map "\C-b" 'list-buffers)
Note that buffers with names starting with spaces are omitted.
Non-null optional arg FILES-ONLY means mention only file buffers.
-The M column contains a * for buffers that are modified.
-The R column contains a % for buffers that are read-only."
+For more information, see the function `buffer-menu'."
+ (interactive "P")
+ (display-buffer (list-buffers-noselect files-only)))
+
+(defun Buffer-menu-buffer+size (name size &optional name-props size-props)
+ (if (> (+ (length name) (length size) 2) Buffer-menu-buffer+size-width)
+ (setq name
+ (if (string-match "<[0-9]+>$" name)
+ (concat (substring name 0
+ (- Buffer-menu-buffer+size-width
+ (max (length size) 3)
+ (match-end 0)
+ (- (match-beginning 0))
+ 2))
+ ":" ; narrow ellipsis
+ (match-string 0 name))
+ (concat (substring name 0
+ (- Buffer-menu-buffer+size-width
+ (max (length size) 3)
+ 2))
+ ":"))) ; narrow ellipsis
+ ;; Don't put properties on (buffer-name).
+ (setq name (copy-sequence name)))
+ (add-text-properties 0 (length name) name-props name)
+ (add-text-properties 0 (length size) size-props size)
+ (concat name
+ (make-string (- Buffer-menu-buffer+size-width
+ (length name)
+ (length size))
+ ?\s)
+ size))
+
+(defun Buffer-menu-sort (column)
+ "Sort the buffer menu by COLUMN."
(interactive "P")
- (let ((old-buffer (current-buffer))
- (blist-buffer (get-buffer-create "*Buffer List*"))
- (desired-point nil))
- (with-output-to-temp-buffer "*Buffer List*"
- (set-buffer standard-output)
- (princ "\
- MR Buffer Size Mode File
- -- ------ ---- ---- ----
-")
- (let ((bl (buffer-list)))
- (while bl
- (let* ((buffer (car bl))
- (name (buffer-name buffer))
- (file (buffer-file-name buffer)))
- (cond
- ;; Don't mention internal buffers.
- ((string= (substring name 0 1) " "))
- ;; Maybe don't mention buffers without files.
- ((and files-only (not file)))
- ;; Otherwise output info.
- (t
- ;; Identify current buffer.
- (if (eq buffer old-buffer)
- (progn
- (setq desired-point (point))
- (princ "."))
- (princ " "))
- ;; Identify modified buffers.
- (princ (if (buffer-modified-p buffer) "*" " "))
- ;; Handle readonly status. The output buffer is special
- ;; cased to be readonly; it is actually made so at a later
- ;; date.
- (princ (if (or (eq buffer standard-output) buffer-read-only)
- "% "
- " "))
- (princ name)
- (indent-to 17 2)
- (let (size
- mode
- (excess (- (current-column) 17)))
- (save-excursion
- (set-buffer buffer)
- (setq size (format "%8d" (buffer-size)))
- ;; Ack -- if looking at the *Buffer List* buffer,
- ;; always use "Buffer Menu" mode. Otherwise the
- ;; first time the buffer is created, the mode will
- ;; be wrong.
- (setq mode (if (eq buffer standard-output)
- "Buffer Menu"
- mode-name))
- (while (and (> excess 0) (= (aref size 0) ?\ ))
- (setq size (substring size 1))
- (setq excess (1- excess))))
- (princ size)
- (indent-to 27 1)
- (princ mode))
- (indent-to 40 1)
- (or file
+ (when column
+ (setq column (prefix-numeric-value column))
+ (if (< column 2) (setq column 2))
+ (if (> column 5) (setq column 5)))
+ (setq Buffer-menu-sort-column column)
+ (let (buffer-read-only l buf m1 m2)
+ (save-excursion
+ (Buffer-menu-beginning)
+ (while (not (eobp))
+ (when (buffer-live-p (setq buf (get-text-property (+ (point) 4) 'buffer)))
+ (setq m1 (char-after)
+ m1 (if (memq m1 '(?> ?D)) m1)
+ m2 (char-after (+ (point) 2))
+ m2 (if (eq m2 ?S) m2))
+ (if (or m1 m2)
+ (push (list buf m1 m2) l)))
+ (forward-line)))
+ (Buffer-menu-revert)
+ (setq buffer-read-only)
+ (save-excursion
+ (Buffer-menu-beginning)
+ (while (not (eobp))
+ (when (setq buf (assq (get-text-property (+ (point) 4) 'buffer) l))
+ (setq m1 (cadr buf)
+ m2 (cadr (cdr buf)))
+ (when m1
+ (delete-char 1)
+ (insert m1)
+ (backward-char 1))
+ (when m2
+ (forward-char 2)
+ (delete-char 1)
+ (insert m2)))
+ (forward-line)))))
+
+(defun Buffer-menu-sort-by-column (&optional e)
+ "Sort the buffer menu by the column clicked on."
+ (interactive (list last-input-event))
+ (if e (mouse-select-window e))
+ (let* ((pos (event-start e))
+ (obj (posn-object pos))
+ (col (if obj
+ (get-text-property (cdr obj) 'column (car obj))
+ (get-text-property (posn-point pos) 'column))))
+ (Buffer-menu-sort col)))
+
+(defvar Buffer-menu-sort-button-map
+ (let ((map (make-sparse-keymap)))
+ ;; This keymap handles both nil and non-nil values for
+ ;; Buffer-menu-use-header-line.
+ (define-key map [header-line mouse-1] 'Buffer-menu-sort-by-column)
+ (define-key map [header-line mouse-2] 'Buffer-menu-sort-by-column)
+ (define-key map [mouse-2] 'Buffer-menu-sort-by-column)
+ (define-key map [follow-link] 'mouse-face)
+ (define-key map "\C-m" 'Buffer-menu-sort-by-column)
+ map)
+ "Local keymap for Buffer menu sort buttons.")
+
+(defun Buffer-menu-make-sort-button (name column)
+ (if (equal column Buffer-menu-sort-column) (setq column nil))
+ (propertize name
+ 'column column
+ 'help-echo (concat
+ (if Buffer-menu-use-header-line
+ "mouse-1, mouse-2: sort by "
+ "mouse-2, RET: sort by ")
+ (if column (downcase name) "visited order"))
+ 'mouse-face 'highlight
+ 'keymap Buffer-menu-sort-button-map))
+
+(defun list-buffers-noselect (&optional files-only buffer-list)
+ "Create and return a buffer with a list of names of existing buffers.
+The buffer is named `*Buffer List*'.
+Note that buffers with names starting with spaces are omitted.
+Non-null optional arg FILES-ONLY means mention only file buffers.
+
+If BUFFER-LIST is non-nil, it should be a list of buffers;
+it means list those buffers and no others.
+
+For more information, see the function `buffer-menu'."
+ (let* ((old-buffer (current-buffer))
+ (standard-output standard-output)
+ (mode-end (make-string (- Buffer-menu-mode-width 2) ?\s))
+ (header (concat "CRM "
+ (Buffer-menu-buffer+size
+ (Buffer-menu-make-sort-button "Buffer" 2)
+ (Buffer-menu-make-sort-button "Size" 3))
+ " "
+ (Buffer-menu-make-sort-button "Mode" 4) mode-end
+ (Buffer-menu-make-sort-button "File" 5) "\n"))
+ list desired-point)
+ (when Buffer-menu-use-header-line
+ (let ((pos 0))
+ ;; Turn whitespace chars in the header into stretch specs so
+ ;; they work regardless of the header-line face.
+ (while (string-match "[ \t\n]+" header pos)
+ (setq pos (match-end 0))
+ (put-text-property (match-beginning 0) pos 'display
+ ;; Assume fixed-size chars in the buffer.
+ (list 'space :align-to pos)
+ header)))
+ ;; Try to better align the one-char headers.
+ (put-text-property 0 3 'face 'fixed-pitch header)
+ ;; Add a "dummy" leading space to align the beginning of the header
+ ;; line with the beginning of the text (rather than with the left
+ ;; scrollbar or the left fringe). –-Stef
+ (setq header (concat (propertize " " 'display '(space :align-to 0))
+ header)))
+ (with-current-buffer (get-buffer-create "*Buffer List*")
+ (setq buffer-read-only nil)
+ (erase-buffer)
+ (setq standard-output (current-buffer))
+ (unless Buffer-menu-use-header-line
+ ;; Use U+2014 (EM DASH) to underline if possible, else U+002D (HYPHEN-MINUS)
+ (let ((underline (if (char-displayable-p ?—) ?— ?-)))
+ (insert header
+ (apply 'string
+ (mapcar (lambda (c)
+ (if (memq c '(?\n ?\s)) c underline))
+ header)))))
+ ;; Collect info for every buffer we're interested in.
+ (dolist (buffer (or buffer-list
+ (buffer-list
+ (when Buffer-menu-use-frame-buffer-list
+ (selected-frame)))))
+ (with-current-buffer buffer
+ (let ((name (buffer-name))
+ (file buffer-file-name))
+ (unless (and (not buffer-list)
+ (or
+ ;; Don't mention internal buffers.
+ (and (string= (substring name 0 1) " ") (null file))
+ ;; Maybe don't mention buffers without files.
+ (and files-only (not file))
+ (string= name "*Buffer List*")))
+ ;; Otherwise output info.
+ (let ((mode (concat (format-mode-line mode-name nil nil buffer)
+ (if mode-line-process
+ (format-mode-line mode-line-process
+ nil nil buffer))))
+ (bits (string
+ (if (eq buffer old-buffer) ?. ?\s)
+ ;; Handle readonly status. The output buffer
+ ;; is special cased to appear readonly; it is
+ ;; actually made so at a later date.
+ (if (or (eq buffer standard-output)
+ buffer-read-only)
+ ?% ?\s)
+ ;; Identify modified buffers.
+ (if (buffer-modified-p) ?* ?\s)
+ ;; Space separator.
+ ?\s)))
+ (unless file
;; No visited file. Check local value of
;; list-buffers-directory.
- (save-excursion
- (set-buffer buffer)
- (if (and (boundp 'list-buffers-directory)
+ (when (and (boundp 'list-buffers-directory)
list-buffers-directory)
- (setq file list-buffers-directory))))
- (if file
- (princ file))
- (princ "\n"))))
- (setq bl (cdr bl)))))
- ;; DESIRED-POINT doesn't have to be set; it is not when the
- ;; current buffer is not displayed for some reason.
- (save-excursion
- (set-buffer blist-buffer)
+ (setq file list-buffers-directory)))
+ (push (list buffer bits name (buffer-size) mode file)
+ list))))))
+ ;; Preserve the original buffer-list ordering, just in case.
+ (setq list (nreverse list))
+ ;; Place the buffers's info in the output buffer, sorted if necessary.
+ (dolist (buffer
+ (if Buffer-menu-sort-column
+ (sort list
+ (if (eq Buffer-menu-sort-column 3)
+ (lambda (a b)
+ (< (nth Buffer-menu-sort-column a)
+ (nth Buffer-menu-sort-column b)))
+ (lambda (a b)
+ (string< (nth Buffer-menu-sort-column a)
+ (nth Buffer-menu-sort-column b)))))
+ list))
+ (if (eq (car buffer) old-buffer)
+ (setq desired-point (point)))
+ (insert (cadr buffer)
+ ;; Put the buffer name into a text property
+ ;; so we don't have to extract it from the text.
+ ;; This way we avoid problems with unusual buffer names.
+ (Buffer-menu-buffer+size (nth 2 buffer)
+ (int-to-string (nth 3 buffer))
+ `(buffer-name ,(nth 2 buffer)
+ buffer ,(car buffer)
+ font-lock-face buffer-menu-buffer
+ mouse-face highlight
+ help-echo "mouse-2: select this buffer"))
+ " "
+ (if (> (length (nth 4 buffer)) Buffer-menu-mode-width)
+ (substring (nth 4 buffer) 0 Buffer-menu-mode-width)
+ (nth 4 buffer)))
+ (when (nth 5 buffer)
+ (indent-to (+ Buffer-menu-buffer-column Buffer-menu-buffer+size-width
+ Buffer-menu-mode-width 4) 1)
+ (princ (abbreviate-file-name (nth 5 buffer))))
+ (princ "\n"))
(Buffer-menu-mode)
+ (when Buffer-menu-use-header-line
+ (setq header-line-format header))
+ ;; DESIRED-POINT doesn't have to be set; it is not when the
+ ;; current buffer is not displayed for some reason.
(and desired-point
- (goto-char desired-point)))))
+ (goto-char desired-point))
+ (setq Buffer-menu-files-only files-only)
+ (set-buffer-modified-p nil)
+ (current-buffer))))
+;; arch-tag: e7dfcfc9-6cb2-46e4-bf55-8ef1936d83c6
;;; buff-menu.el ends here