;;; follow.el --- synchronize windows showing the same buffer
-;; Copyright (C) 1995-1997, 1999, 2001-2011 Free Software Foundation, Inc.
+;; Copyright (C) 1995-1997, 1999, 2001-2016 Free Software Foundation,
+;; Inc.
-;; Author: Anders Lindgren <andersl@andersl.com>
-;; Maintainer: FSF (Anders' email bounces, Sep 2005)
+;; Author: Anders Lindgren
+;; Maintainer: emacs-devel@gnu.org
;; Created: 1995-05-25
;; Keywords: display, window, minor-mode, convenience
;;; Commentary:
-;;{{{ Documentation
-
;; `Follow mode' is a minor mode for Emacs and XEmacs that
;; combines windows into one tall virtual window.
;;
;; This means that whenever one window is moved, all the
;; others will follow. (Hence the name Follow mode.)
;;
-;; * Should the point (cursor) end up outside a window, another
+;; * Should point (cursor) end up outside a window, another
;; window displaying that point is selected, if possible. This
;; makes it possible to walk between windows using normal cursor
;; movement commands.
;; (setq truncate-partial-width-windows nil)
-;; Since the display of XEmacs is pixel-oriented, a line could be
-;; clipped in half at the bottom of the window.
-;;
-;; To make XEmacs avoid clipping (normal) lines, please place the
-;; following line in your init-file:
-;;
-;; (setq pixel-vertical-clip-threshold 30)
-
-
;; The correct way to configure Follow mode, or any other mode for
;; that matter, is to create one or more functions that do
;; whatever you would like to do. These functions are then added to
;; a hook.
;;
-;; When `Follow' mode is activated, functions stored in the hook
-;; `follow-mode-hook' are called. When it is deactivated
-;; `follow-mode-off-hook' is run.
-;;
;; The keymap `follow-key-map' contains key bindings activated by
;; `follow-mode'.
;;
;; this command be added to the global keymap.
;;
;; follow-recenter C-c . C-l
-;; Place the point in the center of the middle window,
+;; Place point in the center of the middle window,
;; or a specified number of lines from either top or bottom.
;;
;; follow-switch-to-buffer C-c . b
;; Example from my ~/.emacs:
;; (global-set-key [f8] 'follow-mode)
-
;; Implementation:
;;
-;; In an ideal world, follow mode would have been implemented in the
-;; kernel of the display routines, making sure that the windows (using
-;; follow mode) ALWAYS are aligned. On planet Earth, however, we must
-;; accept a solution where we ALMOST ALWAYS can make sure that the
-;; windows are aligned.
-;;
-;; Follow mode does this in three places:
-;; 1) After each user command.
-;; 2) After a process output has been performed.
-;; 3) When a scrollbar has been moved.
-;;
-;; This will cover most situations. (Let me know if there are other
-;; situations that should be covered.)
+;; The main method by which Follow mode aligns windows is via the
+;; function `follow-post-command-hook', which is run after each
+;; command. This "fixes up" the alignment of other windows which are
+;; showing the same Follow mode buffer, on the same frame as the
+;; selected window. It does not try to deal with buffers other than
+;; the buffer of the selected frame, or windows on other frames.
;;
-;; Note that only the selected window is checked, for the reason of
-;; efficiency and code complexity. (I.e. it is possible to make a
-;; non-selected window unaligned. It will, however, pop right back
-;; when it is selected.)
-
-;;}}}
+;; Comint mode specially calls `follow-comint-scroll-to-bottom' on
+;; Follow mode buffers. This function scrolls the bottom-most window
+;; in a window chain and aligns the other windows accordingly. Follow
+;; mode adds a function to `compilation-filter-hook' to align
+;; compilation buffers.
;;; Code:
-;;{{{ Preliminaries
-
-;; Make the compiler shut up!
-;; There are two strategies:
-;; 1) Shut warnings off completely.
-;; 2) Handle each warning separately.
-;;
-;; Since I would like to see real errors, I've selected the latter
-;; method.
-;;
-;; The problem with undefined variables and functions has been solved
-;; by using `set', `symbol-value' and `symbol-function' rather than
-;; `setq' and direct references to variables and functions.
-;;
-;; For example:
-;; (if (boundp 'foo) ... (symbol-value 'foo) )
-;; (set 'foo ...) <-- XEmacs doesn't fall for this one.
-;; (funcall (symbol-function 'set) 'bar ...)
-;;
-;; Note: When this file is interpreted, `eval-when-compile' is
-;; evaluated. Since it doesn't hurt to evaluate it, but it is a bit
-;; annoying, we test if the byte-compiler has been loaded. This can,
-;; of course, lead to some occasional unintended evaluation...
-;;
-;; Should someone come up with a better solution, please let me
-;; know.
-
(require 'easymenu)
+(eval-when-compile (require 'cl-lib))
-(eval-when-compile
- (if (or (featurep 'bytecomp)
- (featurep 'byte-compile))
- (cond ((featurep 'xemacs)
- ;; Make XEmacs shut up! I'm using standard Emacs
- ;; functions, they are NOT obsolete!
- (if (eq (get 'force-mode-line-update 'byte-compile)
- 'byte-compile-obsolete)
- (put 'force-mode-line-update 'byte-compile 'nil))
- (if (eq (get 'frame-first-window 'byte-compile)
- 'byte-compile-obsolete)
- (put 'frame-first-window 'byte-compile 'nil))))))
-
-;;}}}
-;;{{{ Variables
+;;; Variables
(defgroup follow nil
"Synchronize windows showing the same buffer."
- :prefix "follow-"
:group 'windows
:group 'convenience)
:type 'hook
:group 'follow)
-(defcustom follow-mode-off-hook nil
- "Hooks to run when Follow mode is turned off."
- :type 'hook
- :group 'follow)
-(make-obsolete-variable 'follow-mode-off-hook 'follow-mode-hook "22.2")
-
-;;{{{ Keymap/Menu
+;;; Keymap/Menu
;; Define keys for the follow-mode minor mode map and replace some
-;; functions in the global map. All `follow' mode special functions
-;; can be found on (the somewhat cumbersome) "C-c . <key>"
-;; (Control-C dot <key>). (As of Emacs 19.29 the keys
-;; C-c <punctuation character> are reserved for minor modes.)
-;;
-;; To change the prefix, redefine `follow-mode-prefix' before
-;; `follow' is loaded, or see the section on `follow-mode-hook'
-;; above for an example of how to bind the keys the way you like.
+;; functions in the global map. All Follow mode special functions can
+;; be found on the `C-c .' prefix key.
;;
-;; Please note that the keymap is defined the first time this file is
-;; loaded. Also note that the only valid way to manipulate the
-;; keymap is to use `define-key'. Don't change it using `setq' or
-;; similar!
+;; To change the prefix, redefine `follow-mode-prefix' before `follow'
+;; is loaded, or see the section on `follow-mode-hook' above for an
+;; example of how to bind the keys the way you like.
(defcustom follow-mode-prefix "\C-c."
"Prefix key to use for follow commands in Follow mode.
;; the look and feel of Follow mode.)
(define-key mainmap [remap end-of-buffer] 'follow-end-of-buffer)
+ (define-key mainmap [remap scroll-bar-toolkit-scroll] 'follow-scroll-bar-toolkit-scroll)
+ (define-key mainmap [remap scroll-bar-drag] 'follow-scroll-bar-drag)
+ (define-key mainmap [remap scroll-bar-scroll-up] 'follow-scroll-bar-scroll-up)
+ (define-key mainmap [remap scroll-bar-scroll-down] 'follow-scroll-bar-scroll-down)
+ (define-key mainmap [remap mwheel-scroll] 'follow-mwheel-scroll)
+
mainmap)
"Minor mode keymap for Follow mode.")
'(["Follow mode" follow-mode
:style toggle :selected follow-mode])))
-;; If there is a `tools' menu, we use it. However, we can't add a
-;; minor-mode specific item to it (it's broken), so we make the
-;; contents ghosted when not in use, and add ourselves to the
-;; global map.
(easy-menu-add-item nil '("Tools")
'("Follow"
- ;; The Emacs code used to just grey out operations when follow-mode was
- ;; not enabled, whereas the XEmacs code used to remove it altogether.
- ;; Not sure which is preferable, but clearly the preference should not
- ;; depend on the flavor.
:filter follow-menu-filter
["Scroll Up" follow-scroll-up follow-mode]
["Scroll Down" follow-scroll-down follow-mode]
"--"
["Follow mode" follow-mode :style toggle :selected follow-mode]))
-;;}}}
-
(defcustom follow-mode-line-text " Follow"
"Text shown in the mode line when Follow mode is active.
Defaults to \" Follow\". Examples of other values
(defcustom follow-auto nil
"Non-nil activates Follow mode whenever a file is loaded."
:type 'boolean
- :group 'follow)
-
-(defcustom follow-intercept-processes (fboundp 'start-process)
- "When non-nil, Follow mode will monitor process output."
- :type 'boolean
- :group 'follow)
-
-(defvar follow-avoid-tail-recenter-p (not (featurep 'xemacs))
- "*When non-nil, patch Emacs so that tail windows won't be recentered.
-
-A \"tail window\" is a window that displays only the end of
-the buffer. Normally it is practical for the user that empty
-windows are recentered automatically. However, when using
-Follow mode it breaks the display when the end is displayed
-in a window \"above\" the last window. This is for
-example the case when displaying a short page in info.
-
-Must be set before Follow mode is loaded.
-
-Please note that it is not possible to fully prevent Emacs from
-recentering empty windows. Please report if you find a repeatable
-situation in which Emacs recenters empty windows.
-
-XEmacs, as of 19.12, does not recenter windows, good!")
+ :group 'follow
+ :set (lambda (symbol value)
+ (if value
+ (add-hook 'find-file-hook 'follow-find-file-hook t)
+ (remove-hook 'find-file-hook 'follow-find-file-hook))
+ (set-default symbol value)))
(defvar follow-cache-command-list
- '(next-line previous-line forward-char backward-char)
+ '(next-line previous-line forward-char backward-char right-char left-char)
"List of commands that don't require recalculation.
In order to be able to use the cache, a command should not change the
To mark other commands as suitable for caching, set the symbol
property `follow-mode-use-cache' to non-nil.")
-(defvar follow-debug nil
- "*Non-nil when debugging Follow mode.")
-
+(defcustom follow-debug nil
+ "If non-nil, emit Follow mode debugging messages."
+ :type 'boolean
+ :group 'follow)
;; Internal variables:
(defvar follow-internal-force-redisplay nil
"True when Follow mode should redisplay the windows.")
-(defvar follow-process-filter-alist '()
- "The original filters for processes intercepted by Follow mode.")
-
(defvar follow-active-menu nil
"The menu visible when Follow mode is active.")
-(defvar follow-deactive-menu nil
- "The menu visible when Follow mode is deactivated.")
+(defvar follow-inactive-menu nil
+ "The menu visible when Follow mode is inactive.")
(defvar follow-inside-post-command-hook nil
"Non-nil when inside Follow modes `post-command-hook'.
(defvar follow-windows-start-end-cache nil
"Cache used by `follow-window-start-end'.")
-;;}}}
-;;{{{ Debug messages
+(defvar follow-fixed-window nil
+ "If non-nil, the current window must not be scrolled.
+This is typically set by explicit scrolling commands.")
+;;; Debug messages
;; This inline function must be as small as possible!
;; Maybe we should define a macro that expands to nil if
(if (and (boundp 'follow-debug) follow-debug)
(apply 'message args)))
-;;}}}
-;;{{{ Cache
+;;; Cache
(dolist (cmd follow-cache-command-list)
(put cmd 'follow-mode-use-cache t))
-;;}}}
-
-;;{{{ The mode
+;;; The mode
;;;###autoload
(defun turn-on-follow-mode ()
This means that whenever one window is moved, all the
others will follow. (Hence the name Follow mode.)
-* Should the point (cursor) end up outside a window, another
+* Should point (cursor) end up outside a window, another
window displaying that point is selected, if possible. This
makes it possible to walk between windows using normal cursor
movement commands.
-Follow mode comes to its prime when used on a large screen and two
-side-by-side windows are used. The user can, with the help of Follow
-mode, use two full-height windows as though they would have been
-one. Imagine yourself editing a large function, or section of text,
-and being able to use 144 lines instead of the normal 72... (your
+Follow mode comes to its prime when used on a large screen and two or
+more side-by-side windows are used. The user can, with the help of
+Follow mode, use these full-height windows as though they were one.
+Imagine yourself editing a large function, or section of text, and
+being able to use 144 or 216 lines instead of the normal 72... (your
mileage may vary).
To split one large window into two side-by-side windows, the commands
`\\[split-window-right]' or \
-`M-x follow-delete-other-windows-and-split' can be used.
+`\\[follow-delete-other-windows-and-split]' can be used.
Only windows displayed in the same frame follow each other.
-If the variable `follow-intercept-processes' is non-nil, Follow mode
-will listen to the output of processes and redisplay accordingly.
-\(This is the default.)
-
This command runs the normal hook `follow-mode-hook'.
Keys specific to Follow mode:
\\{follow-mode-map}"
:keymap follow-mode-map
- (when (and follow-mode follow-intercept-processes)
- (follow-intercept-process-output))
- (cond (follow-mode ; On
- ;; XEmacs: If this is non-nil, the window will scroll before
- ;; the point will have a chance to get into the next window.
- (when (boundp 'scroll-on-clipped-lines)
- (setq scroll-on-clipped-lines nil))
- (force-mode-line-update)
- (add-hook 'post-command-hook 'follow-post-command-hook t))
-
- ((not follow-mode) ; Off
- (force-mode-line-update))))
-
-;;}}}
-;;{{{ Find file hook
-
-;; This will start follow-mode whenever a new file is loaded, if
-;; the variable `follow-auto' is non-nil.
-
-(add-hook 'find-file-hook 'follow-find-file-hook t)
+ (if follow-mode
+ (progn
+ (add-hook 'compilation-filter-hook 'follow-align-compilation-windows t t)
+ (add-hook 'post-command-hook 'follow-post-command-hook t)
+ (add-hook 'window-size-change-functions 'follow-window-size-change t)
+ (add-hook 'after-change-functions 'follow-after-change nil t)
+ (add-hook 'isearch-update-post-hook 'follow-post-command-hook nil t)
+ (add-hook 'replace-update-post-hook 'follow-post-command-hook nil t)
+ (add-hook 'ispell-update-post-hook 'follow-post-command-hook nil t)
+
+ (setq window-group-start-function 'follow-window-start)
+ (setq window-group-end-function 'follow-window-end)
+ (setq set-window-group-start-function 'follow-set-window-start)
+ (setq recenter-window-group-function 'follow-recenter)
+ (setq pos-visible-in-window-group-p-function
+ 'follow-pos-visible-in-window-p)
+ (setq selected-window-group-function 'follow-all-followers)
+ (setq move-to-window-group-line-function 'follow-move-to-window-line))
+
+ ;; Remove globally-installed hook functions only if there is no
+ ;; other Follow mode buffer.
+ (let ((buffers (buffer-list))
+ following)
+ (while (and (not following) buffers)
+ (setq following (buffer-local-value 'follow-mode (car buffers))
+ buffers (cdr buffers)))
+ (unless following
+ (remove-hook 'post-command-hook 'follow-post-command-hook)
+ (remove-hook 'window-size-change-functions 'follow-window-size-change)))
+
+ (kill-local-variable 'move-to-window-group-line-function)
+ (kill-local-variable 'selected-window-group-function)
+ (kill-local-variable 'pos-visible-in-window-group-p-function)
+ (kill-local-variable 'recenter-window-group-function)
+ (kill-local-variable 'set-window-group-start-function)
+ (kill-local-variable 'window-group-end-function)
+ (kill-local-variable 'window-group-start-function)
+
+ (remove-hook 'ispell-update-post-hook 'follow-post-command-hook t)
+ (remove-hook 'replace-update-post-hook 'follow-post-command-hook t)
+ (remove-hook 'isearch-update-post-hook 'follow-post-command-hook t)
+ (remove-hook 'after-change-functions 'follow-after-change t)
+ (remove-hook 'compilation-filter-hook 'follow-align-compilation-windows t)))
(defun follow-find-file-hook ()
"Find-file hook for Follow mode. See the variable `follow-auto'."
- (if follow-auto (follow-mode t)))
-
-;;}}}
-
-;;{{{ User functions
-
-;;;
-;;; User functions usable when in Follow mode.
-;;;
-
-;;{{{ Scroll
+ (if follow-auto (follow-mode 1)))
+
+;;; User functions
+
+;;; Scroll
+
+(defun follow-get-scrolled-point (dest windows)
+ "Calculate the correct value for point after a scrolling operation.
+
+DEST is our default position, typically where point was before the scroll.
+If `scroll-preserve-screen-position' is non-nil and active, DEST will be
+in the same screen position as before the scroll. WINDOWS is the list of
+windows in the follow chain.
+
+This function attempts to duplicate the point placing from
+`window_scroll_line_based' in the Emacs core source window.c.
+
+Return the new position."
+ (if (and scroll-preserve-screen-position
+ (get this-command 'scroll-command))
+ dest
+ (let ((dest-column
+ (save-excursion
+ (goto-char dest)
+ (- (current-column)
+ (progn (vertical-motion 0) (current-column)))))
+ (limit0
+ (with-selected-window (car windows)
+ (save-excursion
+ (goto-char (window-start))
+ (vertical-motion 0)
+ (point))))
+ (limitn
+ (with-selected-window (car (reverse windows))
+ (save-excursion
+ (goto-char (window-end nil t))
+ (if (pos-visible-in-window-p)
+ (point) ; i.e. (point-max)
+ (1- (point)))))))
+ (cond
+ ((< dest limit0)
+ (with-selected-window (car windows)
+ (save-excursion
+ (goto-char limit0)
+ (vertical-motion (cons dest-column 0))
+ (point))))
+ ((> dest limitn)
+ (with-selected-window (car (reverse windows))
+ (save-excursion
+ (goto-char limitn)
+ (vertical-motion (cons dest-column 0))
+ (point))))
+ (t dest)))))
;; `scroll-up' and `-down', but for windows in Follow mode.
;;
;; position... (This would also be corrected if we would have had a
;; good redisplay abstraction.)
+(defun follow-scroll-up-arg (arg)
+ "Scroll the text in a follow mode window chain up by ARG lines.
+If ARG is nil, scroll the size of the current window.
+
+This is an internal function for `follow-scroll-up' and
+`follow-scroll-up-window'."
+ (let ((opoint (point)) (owin (selected-window)))
+ (while
+ ;; If we are too near EOB, try scrolling the previous window.
+ (condition-case nil (progn (scroll-up arg) nil)
+ (end-of-buffer
+ (condition-case nil (progn (follow-previous-window) t)
+ (error
+ (select-window owin)
+ (goto-char opoint)
+ (signal 'end-of-buffer nil))))))
+ (unless (and scroll-preserve-screen-position
+ (get this-command 'scroll-command))
+ (goto-char opoint))
+ (setq follow-fixed-window t)))
+
+(defun follow-scroll-down-arg (arg)
+ "Scroll the text in a follow mode window chain down by ARG lines.
+If ARG is nil, scroll the size of the current window.
+
+This is an internal function for `follow-scroll-down' and
+`follow-scroll-down-window'."
+ (let ((opoint (point)))
+ (scroll-down arg)
+ (unless (and scroll-preserve-screen-position
+ (get this-command 'scroll-command))
+ (goto-char opoint))
+ (setq follow-fixed-window t)))
+
+;;;###autoload
+(defun follow-scroll-up-window (&optional arg)
+ "Scroll text in a Follow mode window up by that window's size.
+The other windows in the window chain will scroll synchronously.
+
+If called with no ARG, the `next-screen-context-lines' last lines of
+the window will be visible after the scroll.
+
+If called with an argument, scroll ARG lines up.
+Negative ARG means scroll downward.
+
+Works like `scroll-up' when not in Follow mode."
+ (interactive "P")
+ (cond ((not follow-mode)
+ (scroll-up arg))
+ ((eq arg '-)
+ (follow-scroll-down-window))
+ (t (follow-scroll-up-arg arg))))
+(put 'follow-scroll-up-window 'scroll-command t)
+
+;;;###autoload
+(defun follow-scroll-down-window (&optional arg)
+ "Scroll text in a Follow mode window down by that window's size.
+The other windows in the window chain will scroll synchronously.
+
+If called with no ARG, the `next-screen-context-lines' top lines of
+the window in the chain will be visible after the scroll.
+
+If called with an argument, scroll ARG lines down.
+Negative ARG means scroll upward.
+
+Works like `scroll-down' when not in Follow mode."
+ (interactive "P")
+ (cond ((not follow-mode)
+ (scroll-down arg))
+ ((eq arg '-)
+ (follow-scroll-up-window))
+ (t (follow-scroll-down-arg arg))))
+(put 'follow-scroll-down-window 'scroll-command t)
+
+;;;###autoload
(defun follow-scroll-up (&optional arg)
"Scroll text in a Follow mode window chain up.
Works like `scroll-up' when not in Follow mode."
(interactive "P")
- (cond ((not (and (boundp 'follow-mode) follow-mode))
+ (cond ((not follow-mode)
(scroll-up arg))
- (arg
- (save-excursion (scroll-up arg))
- (setq follow-internal-force-redisplay t))
- (t
+ (arg (follow-scroll-up-arg arg))
+ (t
(let* ((windows (follow-all-followers))
(end (window-end (car (reverse windows)))))
(if (eq end (point-max))
(goto-char end))
(vertical-motion (- next-screen-context-lines))
(set-window-start (car windows) (point)))))))
+(put 'follow-scroll-up 'scroll-command t)
-
+;;;###autoload
(defun follow-scroll-down (&optional arg)
"Scroll text in a Follow mode window chain down.
If called with an argument, scroll ARG lines down.
Negative ARG means scroll upward.
-Works like `scroll-up' when not in Follow mode."
+Works like `scroll-down' when not in Follow mode."
(interactive "P")
- (cond ((not (and (boundp 'follow-mode) follow-mode))
- (scroll-up arg))
- (arg
- (save-excursion (scroll-down arg)))
- (t
+ (cond ((not follow-mode)
+ (scroll-down arg))
+ (arg (follow-scroll-down-arg arg))
+ (t
(let* ((windows (follow-all-followers))
(win (car (reverse windows)))
(start (window-start (car windows))))
(goto-char start)
(vertical-motion (- next-screen-context-lines 1))
(setq follow-internal-force-redisplay t))))))
-
-;;}}}
-;;{{{ Buffer
+(put 'follow-scroll-down 'scroll-command t)
+
+(declare-function comint-adjust-point "comint" (window))
+(defvar comint-scroll-show-maximum-output)
+
+(defun follow-comint-scroll-to-bottom (&optional _window)
+ "Scroll the bottom-most window in the current Follow chain.
+This is to be called by `comint-postoutput-scroll-to-bottom'."
+ (let* ((buffer (current-buffer))
+ (selected (selected-window))
+ (is-selected (eq (window-buffer) buffer))
+ some-window)
+ (when (or is-selected
+ (setq some-window (get-buffer-window)))
+ (let* ((pos (progn (comint-adjust-point nil) (point)))
+ (win (if is-selected
+ selected
+ (car (last (follow-all-followers some-window))))))
+ (select-window win)
+ (goto-char pos)
+ (setq follow-windows-start-end-cache nil)
+ (follow-adjust-window win)
+ (unless is-selected
+ (select-window selected)
+ (set-buffer buffer))))))
+
+(defun follow-align-compilation-windows ()
+ "Align the windows of the current Follow mode buffer.
+This is to be called from `compilation-filter-hook'."
+ (let ((buffer (current-buffer))
+ (win (get-buffer-window))
+ (selected (selected-window)))
+ (when (and follow-mode (waiting-for-user-input-p) win)
+ (let ((windows (follow-all-followers win)))
+ (unless (eq (window-buffer selected) buffer)
+ (setq win (car windows))
+ (select-window win))
+ (follow-redisplay windows win t)
+ (setq follow-windows-start-end-cache nil)
+ (unless (eq selected win)
+ (select-window selected)
+ (set-buffer buffer))))))
+
+;;; Buffer
;;;###autoload
(defun follow-delete-other-windows-and-split (&optional arg)
If ARG is positive, the leftmost window is selected. If negative,
the rightmost is selected. If ARG is nil, the leftmost window is
-selected if the original window is the first one in the frame.
-
-To bind this command to a hotkey, place the following line
-in your `~/.emacs' file, replacing [f7] by your favorite key:
- (global-set-key [f7] 'follow-delete-other-windows-and-split)"
+selected if the original window is the first one in the frame."
(interactive "P")
(let ((other (or (and (null arg)
(not (eq (selected-window)
- (frame-first-window (selected-frame)))))
+ (frame-first-window))))
(and arg
(< (prefix-numeric-value arg) 0))))
(start (window-start)))
(current-buffer))))
(or buffer (setq buffer (current-buffer)))
(let ((orig-window (selected-window)))
- (walk-windows
- (function
- (lambda (win)
- (select-window win)
- (switch-to-buffer buffer))))
+ (walk-windows (lambda (win)
+ (select-window win)
+ (switch-to-buffer buffer))
+ 'no-minibuf)
(select-window orig-window)
(follow-redisplay)))
(defun follow-switch-to-current-buffer-all ()
- "Show current buffer in all windows on this frame, and enter Follow mode.
-
-To bind this command to a hotkey place the following line
-in your `~/.emacs' file:
- (global-set-key [f7] 'follow-switch-to-current-buffer-all)"
+ "Show current buffer in all windows on this frame, and enter Follow mode."
(interactive)
- (or (and (boundp 'follow-mode) follow-mode)
- (follow-mode 1))
+ (unless follow-mode
+ (follow-mode 1))
(follow-switch-to-buffer-all))
-;;}}}
-;;{{{ Movement
+;;; Movement
;; Note, these functions are not very useful, at least not unless you
;; rebind the rather cumbersome key sequence `C-c . p'.
(interactive)
(select-window (car (reverse (follow-all-followers)))))
-;;}}}
-;;{{{ Redraw
+;;; Redraw
(defun follow-recenter (&optional arg)
"Recenter the middle window around point.
(win (nth (/ (- (length windows) 1) 2) windows)))
(select-window win)
(goto-char dest)
- (recenter)
- ;;(setq follow-internal-force-redisplay t)
- )))
+ (recenter))))
(defun follow-redraw ()
(sit-for 0)
(follow-redisplay))
-;;}}}
-;;{{{ End of buffer
+;;; End of buffer
(defun follow-end-of-buffer (&optional arg)
"Move point to the end of the buffer, Follow mode style.
(with-no-warnings
(end-of-buffer arg))))
-;;}}}
-
-;;}}}
-
-;;{{{ Display
-
-;;;; The display routines
-
-;;{{{ Information gathering functions
-
-(defun follow-all-followers (&optional testwin)
- "Return all windows displaying the same buffer as the TESTWIN.
-The list contains only windows displayed in the same frame as TESTWIN.
-If TESTWIN is nil the selected window is used."
- (or (window-live-p testwin)
- (setq testwin (selected-window)))
- (let* ((top (frame-first-window (window-frame testwin)))
- (win top)
- (done nil)
- (windows '())
- (buffer (window-buffer testwin)))
- (while (and (not done) win)
- (if (eq (window-buffer win) buffer)
- (setq windows (cons win windows)))
- (setq win (next-window win 'not))
- (if (eq win top)
- (setq done t)))
- (nreverse windows)))
-
+;;; Display
+
+(defun follow--window-sorter (w1 w2)
+ "Sorting function for W1 and W2 based on their positions.
+Return non-nil if W1 is above W2; if their top-lines
+are at the same position, return non-nil if W1 is to the
+left of W2."
+ (let* ((edge-1 (window-pixel-edges w1))
+ (edge-2 (window-pixel-edges w2))
+ (y1 (nth 1 edge-1))
+ (y2 (nth 1 edge-2)))
+ (if (= y1 y2)
+ (< (car edge-1) (car edge-2))
+ (< y1 y2))))
+
+(defun follow-all-followers (&optional win)
+ "Return all windows displaying the same buffer as the WIN.
+The list is sorted with topmost and leftmost windows first, and
+contains only windows in the same frame as WIN. If WIN is nil,
+it defaults to the selected window."
+ (unless (window-live-p win)
+ (setq win (selected-window)))
+ (let ((windows (get-buffer-window-list
+ (window-buffer win) 'no-minibuf (window-frame win))))
+ (sort windows #'follow--window-sorter)))
(defun follow-split-followers (windows &optional win)
- "Split the WINDOWS into the sets: predecessors and successors.
+ "Split WINDOWS into two sets: predecessors and successors.
Return `(PRED . SUCC)' where `PRED' and `SUCC' are ordered starting
from the selected window."
(or win
(setq windows (cdr windows)))
(cons pred (cdr windows))))
-
-;; This function is optimized function for speed!
-
(defun follow-calc-win-end (&optional win)
- "Calculate the presumed window end for WIN.
-
-Actually, the position returned is the start of the next
-window, normally is the end plus one.
-
-If WIN is nil, the selected window is used.
-
-Returns (end-pos end-of-buffer-p)"
- (if (featurep 'xemacs)
- ;; XEmacs can calculate the end of the window by using
- ;; the 'guarantee options. GOOD!
- (let ((end (window-end win t)))
- (if (= end (point-max (window-buffer win)))
- (list end t)
- (list (+ end 1) nil)))
- ;; Emacs: We have to calculate the end by ourselves.
- ;; This code works on both XEmacs and Emacs, but now
- ;; that XEmacs has got custom-written code, this could
- ;; be optimized for Emacs.
- (let (height buffer-end-p)
- (with-selected-window (or win (selected-window))
- (save-excursion
- (goto-char (window-start))
- (setq height
- (- (window-height)
- (if header-line-format 2 1)))
- (setq buffer-end-p
- (if (bolp)
- (not (= height (vertical-motion height)))
- (save-restriction
- ;; Fix a mis-feature in `vertical-motion':
- ;; The start of the window is assumed to
- ;; coincide with the start of a line.
- (narrow-to-region (point) (point-max))
- (not (= height (vertical-motion height))))))
- (list (point) buffer-end-p))))))
-
-
-;; Can't use `save-window-excursion' since it triggers a redraw.
-(defun follow-calc-win-start (windows pos win)
- "Calculate where WIN will start if the first in WINDOWS start at POS.
+ "Calculate the end position for window WIN.
+Return (END-POS END-OF-BUFFER).
+
+Actually, the position returned is the start of the line after
+the last fully-visible line in WIN. END-OF-BUFFER is t when EOB
+is fully-visible in WIN. If WIN is nil, the selected window is
+used."
+ (let* ((win (or win (selected-window)))
+ (edges (window-inside-pixel-edges win))
+ (ht (- (nth 3 edges) (nth 1 edges)))
+ (last-line-pos (posn-point (posn-at-x-y 0 (1- ht) win))))
+ (if (pos-visible-in-window-p last-line-pos win)
+ (let ((end (window-end win t)))
+ (list end (pos-visible-in-window-p (point-max) win)))
+ (list last-line-pos nil))))
-If WIN is nil the point below all windows is returned."
- (let (start)
- (while (and windows (not (eq (car windows) win)))
- (setq start (window-start (car windows)))
+(defun follow-calc-win-start (windows pos win)
+ "Determine the start of window WIN in a Follow mode window chain.
+WINDOWS is a list of chained windows, and POS is the starting
+position for the first window in the list. If WIN is nil, return
+the point below all windows."
+ (while (and windows (not (eq (car windows) win)))
+ (let ((old-start (window-start (car windows))))
+ ;; Can't use `save-window-excursion' since it triggers a redraw.
(set-window-start (car windows) pos 'noforce)
(setq pos (car (follow-calc-win-end (car windows))))
- (set-window-start (car windows) start 'noforce)
- (setq windows (cdr windows)))
- pos))
-
+ (set-window-start (car windows) old-start 'noforce)
+ (setq windows (cdr windows))))
+ pos)
;; The result from `follow-windows-start-end' is cached when using
;; a handful simple commands, like cursor movement commands.
(setq cache (cdr cache)))
(and res (null windows) (null cache))))
-
-(defsubst follow-invalidate-cache ()
- "Force `follow-windows-start-end' to recalculate the end of the window."
- (setq follow-windows-start-end-cache nil))
-
-
-;; Build a list of windows and their start and end positions.
-;; Useful to avoid calculating start/end position whenever they are needed.
-;; The list has the format:
-;; ((Win Start End End-of-buffer-visible-p) ...)
-
-;; Used to have a `save-window-excursion', but it obviously triggered
-;; redraws of the display. Check if I used it for anything.
-
-
(defun follow-windows-start-end (windows)
- "Builds a list of (WIN START END BUFFER-END-P) for every window in WINDOWS."
+ "Return a list of (WIN START END BUFFER-END-P) for window list WINDOWS."
(if (follow-cache-valid-p windows)
follow-windows-start-end-cache
(let ((orig-win (selected-window))
win-start-end)
(dolist (w windows)
- (select-window w)
+ (select-window w 'norecord)
(push (cons w (cons (window-start) (follow-calc-win-end)))
win-start-end))
- (select-window orig-win)
+ (select-window orig-win 'norecord)
(setq follow-windows-start-end-cache (nreverse win-start-end)))))
-
(defsubst follow-pos-visible (pos win win-start-end)
"Non-nil when POS is visible in WIN."
(let ((wstart-wend-bend (cdr (assq win win-start-end))))
;; should start at a full screen line.
(defsubst follow-windows-aligned-p (win-start-end)
- "Non-nil if the follower windows are aligned."
- (let ((res t))
- (save-excursion
- (goto-char (window-start (caar win-start-end)))
- (unless (bolp)
- (vertical-motion 0 (caar win-start-end))
- (setq res (eq (point) (window-start (caar win-start-end))))))
- (while (and res (cdr win-start-end))
- ;; At least two followers left
- (setq res (eq (car (cdr (cdr (car win-start-end))))
- (car (cdr (car (cdr win-start-end))))))
+ "Non-nil if the follower windows are aligned.
+The argument, WIN-START-END, should be a list of the form
+returned by `follow-windows-start-end'."
+ (let ((result t))
+ (while (and win-start-end result)
+ (if (cdr win-start-end)
+ (setq result (eq (nth 2 (car win-start-end))
+ (nth 1 (cadr win-start-end)))))
(setq win-start-end (cdr win-start-end)))
- res))
-
+ result))
-;; Check if the point is visible in all windows. (So that
+;; Check if point is visible in all windows. (So that
;; no one will be recentered.)
(defun follow-point-visible-all-windows-p (win-start-end)
;; will lead to a redisplay of the screen later on.
;;
;; This is used with the first window in a follow chain. The reason
-;; is that we want to detect that the point is outside the window.
+;; is that we want to detect that point is outside the window.
;; (Without the update, the start of the window will move as the
;; user presses BackSpace, and the other window redisplay routines
;; will move the start of the window in the wrong direction.)
(vertical-motion 1 win)
(set-window-start win (point) 'noforce)))))
-;;}}}
-;;{{{ Selection functions
-
-;; Make a window in WINDOWS selected if it currently
-;; is displaying the position DEST.
-;;
-;; We don't select a window if it just has been moved.
-
(defun follow-select-if-visible (dest win-start-end)
"Select and return a window, if DEST is visible in it.
Return the selected window."
- (let (win win-end)
+ (let (win wse)
(while (and (not win) win-start-end)
;; Don't select a window that was just moved. This makes it
- ;; possible to later select the last window after a `end-of-buffer'
- ;; command.
- (when (follow-pos-visible dest (caar win-start-end) win-start-end)
- (setq win (caar win-start-end)
- win-end (car (cddr (car win-start-end))))
+ ;; possible to later select the last window after a
+ ;; `end-of-buffer' command.
+ (setq wse (car win-start-end))
+ (when (follow-pos-visible dest (car wse) win-start-end)
+ (setq win (car wse))
(select-window win))
(setq win-start-end (cdr win-start-end)))
- ;; The last line of the window may be partially visible; if so,
- ;; and if point is visible in the next window, select the next
- ;; window instead.
- (and win
- (/= dest (point-max))
- win-start-end
- (follow-pos-visible dest (caar win-start-end) win-start-end)
- (save-excursion
- (goto-char dest)
- (vertical-motion 1 win)
- (>= (point) win-end))
- (setq win (caar win-start-end))
- (select-window win))
win))
-
;; Lets select a window showing the end. Make sure we only select it if
;; it wasn't just moved here. (I.e. M-> shall not unconditionally place
-;; the point in the selected window.)
+;; point in the selected window.)
;;
;; (Compatibility kludge: in Emacs `window-end' is equal to `point-max';
;; in XEmacs, it is equal to `point-max + 1'. Should I really bother
win))
-;; Select a window that will display the point if the windows would
+;; Select a window that will display point if the windows would
;; be redisplayed with the first window fixed. This is useful for
;; example when the user has pressed return at the bottom of a window
-;; as the point is not visible in any window.
+;; as point is not visible in any window.
(defun follow-select-if-visible-from-first (dest windows)
"Try to select one of WINDOWS without repositioning the topmost window.
(set-window-start (car windows) (point) 'noforce)
(setq end-pos-end-p (follow-calc-win-end (car windows)))
(goto-char (car end-pos-end-p))
- ;; Visible, if dest above end, or if eob is visible inside
- ;; the window.
+ ;; Visible, if dest above end, or if eob is visible
+ ;; inside the window.
(if (or (car (cdr end-pos-end-p))
(< dest (point)))
(setq win (car windows))
(goto-char dest))
win))
-
-;;}}}
-;;{{{ Redisplay
+;;; Redisplay
;; Redraw all the windows on the screen, starting with the top window.
-;; The window used as as marker is WIN, or the selcted window if WIN
+;; The window used as as marker is WIN, or the selected window if WIN
;; is nil. Start every window directly after the end of the previous
;; window, to make sure long lines are displayed correctly.
+(defvar follow-start-end-invalid t
+ "When non-nil, indicates `follow-windows-start-end-cache' is invalid.")
+(make-variable-buffer-local 'follow-start-end-invalid)
+
(defun follow-redisplay (&optional windows win preserve-win)
"Reposition the WINDOWS around WIN.
-Should the point be too close to the roof we redisplay everything
+Should point be too close to the roof we redisplay everything
from the top. WINDOWS should contain a list of windows to
redisplay; it is assumed that WIN is a member of the list.
Should WINDOWS be nil, the windows displaying the
(dolist (w windows)
(unless (and preserve-win (eq w win))
(set-window-start w start))
- (setq start (car (follow-calc-win-end w))))))
-
+ (setq start (car (follow-calc-win-end w))))
+ (setq follow-start-end-invalid nil)))
(defun follow-estimate-first-window-start (windows win start)
"Estimate the position of the first window.
(goto-char start)
(vertical-motion 0 win)
(dolist (w windows-before)
- (vertical-motion (- 1 (window-text-height w)) w))
+ (vertical-motion (- (window-text-height w)) w))
(point))))
;; Find the starting point, start at GUESS and search upward. Return
;; a point on the same line as GUESS, or above.
-;;
-;; (Is this ever used? I must make sure it works just in case it is
-;; ever called.)
(defun follow-calculate-first-window-start-from-below
(windows guess &optional win start)
(setq res (point))))))
res)))
-;;}}}
-;;{{{ Avoid tail recenter
+;;; Avoid tail recenter
-;; This sets the window internal flag `force_start'. The effect is that
-;; windows only displaying the tail aren't recentered.
-;; Has to be called before every redisplay... (Great isn't it?)
-;;
-;; XEmacs doesn't recenter the tail, GOOD!
-;;
-;; A window displaying only the tail, is a window whose
-;; window-start position is equal to (point-max) of the buffer it
-;; displays.
-;;
-;; This function is also added to `post-command-idle-hook', introduced
-;; in Emacs 19.30. This is needed since the vaccine injected by the
-;; call from `post-command-hook' only works until the next redisplay.
-;; It is possible that the functions in the `post-command-idle-hook'
-;; can cause a redisplay, and hence a new vaccine is needed.
+;; This sets the window internal flag `force_start'. The effect is
+;; that windows only displaying the tail aren't recentered.
;;
-;; Sometimes, calling this function could actually cause a redisplay,
-;; especially if it is placed in the debug filter section. I must
-;; investigate this further...
+;; A window displaying only the tail, is a window whose window-start
+;; position is equal to (point-max) of the buffer it displays.
(defun follow-avoid-tail-recenter (&rest _rest)
"Make sure windows displaying the end of a buffer aren't recentered.
-
This is done by reading and rewriting the start position of
non-first windows in Follow mode."
- (if follow-avoid-tail-recenter-p
- (let* ((orig-buffer (current-buffer))
- (top (frame-first-window (selected-frame)))
- (win top)
- (who '()) ; list of (buffer . frame)
- start
- pair) ; (buffer . frame)
- ;; If the only window in the frame is a minibuffer
- ;; window, `next-window' will never find it again...
- (if (window-minibuffer-p top)
- nil
- (while ;; look, no body!
- (progn
- (setq start (window-start win))
- (set-buffer (window-buffer win))
- (setq pair (cons (window-buffer win) (window-frame win)))
- (if (member pair who)
- (if (and (boundp 'follow-mode) follow-mode
- (eq (point-max) start))
- ;; Write the same window start back, but don't
- ;; set the NOFORCE flag.
- (set-window-start win start))
- (setq who (cons pair who)))
- (setq win (next-window win 'not t))
- (not (eq win top)))) ;; Loop while this is true.
- (set-buffer orig-buffer)))))
-
-;;}}}
-
-;;}}}
-;;{{{ Post Command Hook
+ (let* ((orig-buffer (current-buffer))
+ (top (frame-first-window))
+ (win top)
+ who) ; list of (buffer . frame)
+ ;; If the only window in the frame is a minibuffer
+ ;; window, `next-window' will never find it again...
+ (unless (window-minibuffer-p top)
+ (while ;; look, no body!
+ (let ((start (window-start win))
+ (pair (cons (window-buffer win) (window-frame win))))
+ (set-buffer (window-buffer win))
+ (cond ((null (member pair who))
+ (setq who (cons pair who)))
+ ((and follow-mode (eq (point-max) start))
+ ;; Write the same window start back, but don't
+ ;; set the NOFORCE flag.
+ (set-window-start win start)))
+ (setq win (next-window win 'not t))
+ (not (eq win top)))) ;; Loop while this is true.
+ (set-buffer orig-buffer))))
+
+;;; Post Command Hook
;; The magic little box. This function is called after every command.
(with-current-buffer (window-buffer win)
(unless (and (symbolp this-command)
(get this-command 'follow-mode-use-cache))
- (follow-invalidate-cache))
- (when (and follow-mode
- (not (window-minibuffer-p win)))
- ;; The buffer shown in the selected window is in follow
- ;; mode. Find the current state of the display.
- (let* ((windows (follow-all-followers win))
- (dest (point))
- (win-start-end (progn
- (follow-update-window-start (car windows))
- (follow-windows-start-end windows)))
- (aligned (follow-windows-aligned-p win-start-end))
- (visible (follow-pos-visible dest win win-start-end))
- selected-window-up-to-date)
- (unless (and aligned visible)
- (follow-invalidate-cache))
- (follow-avoid-tail-recenter)
- ;; Select a window to display point.
- (unless follow-internal-force-redisplay
- (if (eq dest (point-max))
- ;; At point-max, we have to be careful since the
- ;; display can be aligned while `dest' can be
- ;; visible in several windows.
- (cond
- ;; Select the current window, but only when the
- ;; display is correct. (When inserting characters
- ;; in a tail window, the display is not correct, as
- ;; they are shown twice.)
- ;;
- ;; Never stick to the current window after a
- ;; deletion. The reason is cosmetic: when typing
- ;; `DEL' in a window showing only the end of the
- ;; file, a character would be removed from the
- ;; window above, which is very unintuitive.
- ((and visible
- aligned
- (not (memq this-command
- '(backward-delete-char
- delete-backward-char
- backward-delete-char-untabify
- kill-region))))
- (follow-debug-message "Max: same"))
- ;; If the end is visible, and the window doesn't
- ;; seems like it just has been moved, select it.
- ((follow-select-if-end-visible win-start-end)
- (follow-debug-message "Max: end visible")
- (setq visible t aligned nil)
- (goto-char dest))
- ;; Just show the end...
- (t
- (follow-debug-message "Max: default")
- (select-window (car (reverse windows)))
- (goto-char dest)
- (setq visible nil aligned nil)))
-
- ;; We're not at the end, here life is much simpler.
- (cond
- ;; This is the normal case!
- ;; It should be optimized for speed.
- ((and visible aligned)
- (follow-debug-message "same"))
- ;; Pick a position in any window. If the display is
- ;; ok, this will pick the `correct' window.
- ((follow-select-if-visible dest win-start-end)
- (follow-debug-message "visible")
- (goto-char dest)
- ;; We have to perform redisplay, since scrolling is
- ;; needed in case the line is partially visible.
- (setq visible nil))
- ;; Not visible anywhere else, lets pick this one.
- ;; (Is this case used?)
- (visible
- (follow-debug-message "visible in selected."))
- ;; Far out!
- ((eq dest (point-min))
- (follow-debug-message "min")
- (select-window (car windows))
- (goto-char dest)
- (set-window-start (selected-window) (point-min))
- (setq win-start-end (follow-windows-start-end windows))
- (follow-invalidate-cache)
- (setq visible t aligned nil))
- ;; If we can position the cursor without moving the first
- ;; window, do it. This is the case that catches `RET'
- ;; at the bottom of a window.
- ((follow-select-if-visible-from-first dest windows)
- (follow-debug-message "Below first")
- (setq visible t aligned t))
- ;; None of the above. For simplicity, we stick to the
- ;; selected window.
- (t
- (follow-debug-message "None")
- (setq visible nil aligned nil))))
- ;; If a new window has been selected, make sure that the
- ;; old is not scrolled when the point is outside the
- ;; window.
- (unless (eq win (selected-window))
- (let ((p (window-point win)))
- (set-window-start win (window-start win) nil)
- (set-window-point win p))))
- (unless visible
- ;; If point may not be visible in the selected window,
- ;; perform a redisplay; this ensures scrolling.
- (redisplay)
- (setq selected-window-up-to-date t)
- (follow-avoid-tail-recenter)
- (setq win-start-end (follow-windows-start-end windows))
- (follow-invalidate-cache)
- (setq aligned nil))
- ;; Now redraw the windows around the selected window.
- (unless (and (not follow-internal-force-redisplay)
- (or aligned
- (follow-windows-aligned-p win-start-end))
- (follow-point-visible-all-windows-p
- win-start-end))
- (setq follow-internal-force-redisplay nil)
- (follow-redisplay windows (selected-window)
- selected-window-up-to-date)
- (setq win-start-end (follow-windows-start-end windows))
- (follow-invalidate-cache)
- ;; When the point ends up in another window. This
- ;; happens when dest is in the beginning of the file and
- ;; the selected window is not the first. It can also,
- ;; in rare situations happen when long lines are used
- ;; and there is a big difference between the width of
- ;; the windows. (When scrolling one line in a wide
- ;; window which will cause a move larger that an entire
- ;; small window.)
- (unless (follow-pos-visible dest win win-start-end)
- (follow-select-if-visible dest win-start-end)
- (goto-char dest)))
-
- ;; If the region is visible, make it look good when spanning
- ;; multiple windows.
- (when (region-active-p)
- (follow-maximize-region
- (selected-window) windows win-start-end))))
- ;; Whether or not the buffer was in follow mode, we must
- ;; update the windows displaying the tail so that Emacs won't
- ;; recenter them.
- (follow-avoid-tail-recenter)))))
-
-;;}}}
-;;{{{ The region
+ (setq follow-windows-start-end-cache nil))
+ (follow-adjust-window win)))))
+
+(defun follow-adjust-window (win)
+ ;; Adjust the window WIN and its followers.
+ (cl-assert (eq (window-buffer win) (current-buffer)))
+ (when (and follow-mode
+ (not (window-minibuffer-p win)))
+ (let ((windows (follow-all-followers win)))
+ ;; If we've explicitly scrolled, align the windows first.
+ (when follow-fixed-window
+ (follow-debug-message "fixed")
+ (follow-redisplay windows win)
+ (goto-char (follow-get-scrolled-point (point) windows))
+ (setq follow-fixed-window nil))
+ (let* ((dest (point))
+ (win-start-end (progn
+ (follow-update-window-start (car windows))
+ (follow-windows-start-end windows)))
+ (aligned (follow-windows-aligned-p win-start-end))
+ (visible (follow-pos-visible dest win win-start-end))
+ selected-window-up-to-date)
+ (unless (and aligned visible)
+ (setq follow-windows-start-end-cache nil))
+
+ ;; Select a window to display point.
+ (unless follow-internal-force-redisplay
+ (if (eq dest (point-max))
+ ;; Be careful at point-max: the display can be aligned
+ ;; while DEST can be visible in several windows.
+ (cond
+ ;; Select the current window, but only when the display
+ ;; is correct. (When inserting characters in a tail
+ ;; window, the display is not correct, as they are
+ ;; shown twice.)
+ ;;
+ ;; Never stick to the current window after a deletion.
+ ;; Otherwise, when typing `DEL' in a window showing
+ ;; only the end of the file, a character would be
+ ;; removed from the window above, which is very
+ ;; unintuitive.
+ ((and visible
+ aligned
+ (not (memq this-command
+ '(backward-delete-char
+ delete-backward-char
+ backward-delete-char-untabify
+ kill-region))))
+ (follow-debug-message "Max: same"))
+ ;; If the end is visible, and the window doesn't
+ ;; seems like it just has been moved, select it.
+ ((follow-select-if-end-visible win-start-end)
+ (follow-debug-message "Max: end visible")
+ (setq visible t aligned nil)
+ (goto-char dest))
+ ;; Just show the end...
+ (t
+ (follow-debug-message "Max: default")
+ (select-window (car (last windows)))
+ (goto-char dest)
+ (setq visible nil aligned nil)))
+
+ ;; We're not at the end, here life is much simpler.
+ (cond
+ ;; This is the normal case!
+ ;; It should be optimized for speed.
+ ((and visible aligned)
+ (follow-debug-message "same"))
+ ;; Pick a position in any window. If the display is ok,
+ ;; this picks the `correct' window.
+ ((follow-select-if-visible dest win-start-end)
+ (follow-debug-message "visible")
+ (goto-char dest)
+ ;; Perform redisplay, in case line is partially visible.
+ (setq visible nil))
+ ;; Not visible anywhere else, lets pick this one.
+ (visible
+ (follow-debug-message "visible in selected."))
+ ;; If DEST is before the first window start, select the
+ ;; first window.
+ ((< dest (nth 1 (car win-start-end)))
+ (follow-debug-message "before first")
+ (select-window (car windows))
+ (goto-char dest)
+ (setq visible nil aligned nil))
+ ;; If we can position the cursor without moving the first
+ ;; window, do it. This is the case that catches `RET' at
+ ;; the bottom of a window.
+ ((follow-select-if-visible-from-first dest windows)
+ (follow-debug-message "Below first")
+ (setq visible t aligned t))
+ ;; None of the above. Stick to the selected window.
+ (t
+ (follow-debug-message "None")
+ (setq visible nil aligned nil))))
+
+ ;; If a new window was selected, make sure that the old is
+ ;; not scrolled when point is outside the window.
+ (unless (eq win (selected-window))
+ (let ((p (window-point win)))
+ (set-window-start win (window-start win) nil)
+ (set-window-point win p))))
+
+ (unless visible
+ ;; If point may not be visible in the selected window,
+ ;; perform a redisplay; this ensures scrolling.
+ (let ((opoint (point)))
+ (redisplay)
+ ;; If this `redisplay' moved point, we got clobbered by a
+ ;; previous call to `set-window-start'. Try again.
+ (when (/= (point) opoint)
+ (goto-char opoint)
+ (redisplay)))
+
+ (setq selected-window-up-to-date t)
+ (follow-avoid-tail-recenter)
+ (setq win-start-end (follow-windows-start-end windows)
+ follow-windows-start-end-cache nil
+ aligned nil))
+
+ ;; Now redraw the windows around the selected window.
+ (unless (and (not follow-internal-force-redisplay)
+ (or aligned
+ (follow-windows-aligned-p win-start-end))
+ (follow-point-visible-all-windows-p win-start-end))
+ (setq follow-internal-force-redisplay nil)
+ (follow-redisplay windows (selected-window)
+ selected-window-up-to-date)
+ (setq win-start-end (follow-windows-start-end windows)
+ follow-windows-start-end-cache nil)
+ ;; Point can end up in another window when DEST is at
+ ;; the beginning of the buffer and the selected window is
+ ;; not the first. It can also happen when long lines are
+ ;; used and there is a big difference between the width of
+ ;; the windows. (When scrolling one line in a wide window
+ ;; which will cause a move larger that an entire small
+ ;; window.)
+ (unless (follow-pos-visible dest win win-start-end)
+ (follow-select-if-visible dest win-start-end)
+ (goto-char dest)))
+
+ ;; If the region is visible, make it look good when spanning
+ ;; multiple windows.
+ (when (region-active-p)
+ (follow-maximize-region
+ (selected-window) windows win-start-end))))
+
+ ;; Whether or not the buffer was in follow mode, update windows
+ ;; displaying the tail so that Emacs won't recenter them.
+ (follow-avoid-tail-recenter)))
+
+;;; The region
;; Tries to make the highlighted area representing the region look
;; good when spanning several windows.
;;
-;; Not perfect, as the point can't be placed at window end, only at
+;; Not perfect, as point can't be placed at window end, only at
;; end-1. This will highlight a little bit in windows above
;; the current.
(set-window-point (car succ) (nth 1 (assq (car succ) win-start-end)))
(setq succ (cdr succ)))))
-;;}}}
-;;{{{ Scroll bar
+;;; Scroll bar
;;;; Scroll-bar support code.
-;; Why is it needed? Well, if the selected window is in follow mode,
-;; all its followers stick to it blindly. If one of them is scrolled,
-;; it immediately returns to the original position when the mouse is
-;; released. If the selected window is not a follower of the dragged
-;; window the windows will be unaligned.
-
-;; The advices don't get compiled. Aesthetically, this might be a
-;; problem but in practical life it isn't.
-
-;; Discussion: Now when the other windows in the chain follow the
-;; dragged, should we really select it?
-
-(cond ((fboundp 'scroll-bar-drag)
- ;;;
- ;;; Emacs style scrollbars.
- ;;;
-
- ;; Select the dragged window if it is a follower of the
- ;; selected window.
- ;;
- ;; Generate advices of the form:
- ;; (defadvice scroll-bar-drag (after follow-scroll-bar-drag activate)
- ;; "Adviced by `follow-mode'."
- ;; (follow-redraw-after-event (ad-get-arg 0)))
- (let ((cmds '(scroll-bar-drag
- scroll-bar-drag-1 ; Executed at every move.
- scroll-bar-scroll-down
- scroll-bar-scroll-up
- scroll-bar-set-window-start)))
- (while cmds
- (eval
- `(defadvice ,(intern (symbol-name (car cmds)))
- (after
- ,(intern (concat "follow-" (symbol-name (car cmds))))
- activate)
- "Adviced by Follow mode."
- (follow-redraw-after-event (ad-get-arg 0))))
- (setq cmds (cdr cmds))))
-
-
- (defun follow-redraw-after-event (event)
- "Adviced by Follow mode."
- (condition-case nil
- (let* ((orig-win (selected-window))
- (win (nth 0 (funcall
- (symbol-function 'event-start) event)))
- (fmode (assq 'follow-mode
- (buffer-local-variables
- (window-buffer win)))))
- (if (and fmode (cdr fmode))
- ;; The selected window is in follow-mode
- (progn
- ;; Recenter around the dragged window.
- (select-window win)
- (follow-redisplay)
- (select-window orig-win))))
- (error nil))))
-
-
- ((fboundp 'scrollbar-vertical-drag)
- ;;;
- ;;; XEmacs style scrollbars.
- ;;;
-
- ;; Advice all scrollbar functions on the form:
- ;;
- ;; (defadvice scrollbar-line-down
- ;; (after follow-scrollbar-line-down activate)
- ;; (follow-xemacs-scrollbar-support (ad-get-arg 0)))
-
- (let ((cmds '(scrollbar-line-down ; Window
- scrollbar-line-up
- scrollbar-page-down ; Object
- scrollbar-page-up
- scrollbar-to-bottom ; Window
- scrollbar-to-top
- scrollbar-vertical-drag ; Object
- )))
-
- (while cmds
- (eval
- `(defadvice ,(intern (symbol-name (car cmds)))
- (after
- ,(intern (concat "follow-" (symbol-name (car cmds))))
- activate)
- "Adviced by `follow-mode'."
- (follow-xemacs-scrollbar-support (ad-get-arg 0))))
- (setq cmds (cdr cmds))))
-
-
- (defun follow-xemacs-scrollbar-support (window)
- "Redraw windows showing the same buffer as shown in WINDOW.
-WINDOW is either the dragged window, or a cons containing the
-window as its first element. This is called while the user drags
-the scrollbar.
-
-WINDOW can be an object or a window."
- (condition-case nil
- (progn
- (if (consp window)
- (setq window (car window)))
- (let ((fmode (assq 'follow-mode
- (buffer-local-variables
- (window-buffer window))))
- (orig-win (selected-window)))
- (if (and fmode (cdr fmode))
- (progn
- ;; Recenter around the dragged window.
- (select-window window)
- (follow-redisplay)
- (select-window orig-win)))))
- (error nil)))))
-
-;;}}}
-;;{{{ Process output
-
-;; The following sections installs a spy that listens to process
-;; output and tries to reposition the windows whose buffers are in
-;; Follow mode. We play safe as much as possible...
-;;
-;; When follow-mode is activated all active processes are
-;; intercepted. All new processes that change their filter function
-;; using `set-process-filter' are also intercepted. The reason is
-;; that a process can cause a redisplay recentering "tail" windows.
-;; Note that it doesn't hurt to spy on more processes than needed.
-;;
-;; Technically, we set the process filter to `follow-generic-filter'.
-;; The original filter is stored in `follow-process-filter-alist'.
-;; Our generic filter calls the original filter, or inserts the
-;; output into the buffer, if the buffer originally didn't have an
-;; output filter. It also makes sure that the windows connected to
-;; the buffer are aligned.
-;;
-;; Discussion: How do we find processes that don't call
-;; `set-process-filter'? (How often are processes created in a
-;; buffer after Follow mode are activated?)
-;;
-;; Discussion: Should we also advice `process-filter' to make our
-;; filter invisible to others?
-
-;;{{{ Advice for `set-process-filter'
-
-;; Do not call this with 'follow-generic-filter as the name of the
-;; filter...
-
-(defadvice set-process-filter (before follow-set-process-filter activate)
- "Ensure process output will be displayed correctly in Follow mode buffers.
-
-Follow mode inserts its own process filter to do its
-magic stuff before the real process filter is called."
- (if follow-intercept-processes
- (progn
- (setq follow-process-filter-alist
- (delq (assq (ad-get-arg 0) follow-process-filter-alist)
- follow-process-filter-alist))
- (follow-tidy-process-filter-alist)
- (cond ((eq (ad-get-arg 1) t))
- ((eq (ad-get-arg 1) nil)
- (ad-set-arg 1 'follow-generic-filter))
- (t
- (setq follow-process-filter-alist
- (cons (cons (ad-get-arg 0) (ad-get-arg 1))
- follow-process-filter-alist))
- (ad-set-arg 1 'follow-generic-filter))))))
-
-
-(defun follow-call-set-process-filter (proc filter)
- "Call original `set-process-filter' without the Follow mode advice."
- (ad-disable-advice 'set-process-filter 'before
- 'follow-set-process-filter)
- (ad-activate 'set-process-filter)
- (prog1
- (set-process-filter proc filter)
- (ad-enable-advice 'set-process-filter 'before
- 'follow-set-process-filter)
- (ad-activate 'set-process-filter)))
-
-
-(defadvice process-filter (after follow-process-filter activate)
- "Return the original process filter, not `follow-generic-filter'."
- (cond ((eq ad-return-value 'follow-generic-filter)
- (setq ad-return-value
- (cdr-safe (assq (ad-get-arg 0)
- follow-process-filter-alist))))))
-
-
-(defun follow-call-process-filter (proc)
- "Call original `process-filter' without the Follow mode advice."
- (ad-disable-advice 'process-filter 'after
- 'follow-process-filter)
- (ad-activate 'process-filter)
- (prog1
- (process-filter proc)
- (ad-enable-advice 'process-filter 'after
- 'follow-process-filter)
- (ad-activate 'process-filter)))
-
-
-(defun follow-tidy-process-filter-alist ()
- "Remove old processes from `follow-process-filter-alist'."
- (let ((alist follow-process-filter-alist)
- (ps (process-list))
- (new ()))
- (while alist
- (if (and (not (memq (process-status (car (car alist)))
- '(exit signal closed nil)))
- (memq (car (car alist)) ps))
- (setq new (cons (car alist) new)))
- (setq alist (cdr alist)))
- (setq follow-process-filter-alist new)))
-
-;;}}}
-;;{{{ Start/stop interception of processes.
-
-;; Normally, all new processes are intercepted by our `set-process-filter'.
-;; This is needed to intercept old processes that were started before we were
-;; loaded, and processes we have forgotten by calling
-;; `follow-stop-intercept-process-output'.
-
-(defun follow-intercept-process-output ()
- "Intercept all active processes.
-
-This is needed so that Follow mode can track all display events in the
-system. (See `follow-mode'.)"
- (interactive)
- (let ((list (process-list)))
- (while list
- (if (eq (process-filter (car list)) 'follow-generic-filter)
- nil
- ;; The custom `set-process-filter' defined above.
- (set-process-filter (car list) (process-filter (car list))))
- (setq list (cdr list))))
- (setq follow-intercept-processes t))
-
-
-(defun follow-stop-intercept-process-output ()
- "Stop Follow mode from spying on processes.
-
-All current spypoints are removed and no new will be added.
-
-The effect is that Follow mode won't be able to handle buffers
-connected to processes.
-
-The only reason to call this function is if the Follow mode spy filter
-would interfere with some other package. If this happens, please
-report this using the `report-emacs-bug' function."
- (interactive)
- (follow-tidy-process-filter-alist)
- (dolist (process (process-list))
- (when (eq (follow-call-process-filter process) 'follow-generic-filter)
- (follow-call-set-process-filter
- process
- (cdr-safe (assq process follow-process-filter-alist)))
- (setq follow-process-filter-alist
- (delq (assq process follow-process-filter-alist)
- follow-process-filter-alist))))
- (setq follow-intercept-processes nil))
-
-;;}}}
-;;{{{ The filter
-
-;; The following section is a naive method to make buffers with
-;; process output to work with Follow mode. Whenever the start of the
-;; window displaying the buffer is moved, we move it back to its
-;; original position and try to select a new window. (If we fail,
-;; the normal redisplay functions of Emacs will scroll it right
-;; back!)
-
-(defun follow-generic-filter (proc output)
- "Process output filter for process connected to buffers in Follow mode."
- (let* ((old-buffer (current-buffer))
- (orig-win (selected-window))
- (buf (process-buffer proc))
- (win (and buf (if (eq buf (window-buffer orig-win))
- orig-win
- (get-buffer-window buf t))))
- (return-to-orig-win (and win (not (eq win orig-win))))
- (orig-window-start (and win (window-start win))))
-
- ;; If input is pending, the `sit-for' below won't redraw the
- ;; display. In that case, calling `follow-avoid-tail-recenter' may
- ;; provoke the process handling code to schedule a redisplay.
- ;(or (input-pending-p)
- ; (follow-avoid-tail-recenter))
-
- ;; Output the `output'.
- (let ((filter (cdr-safe (assq proc follow-process-filter-alist))))
- (cond
- ;; Call the original filter function
- (filter
- (funcall filter proc output))
-
- ;; No filter, but we've got a buffer. Just output into it.
- (buf
- (set-buffer buf)
- (if (not (marker-buffer (process-mark proc)))
- (set-marker (process-mark proc) (point-max)))
- (let ((moving (= (point) (process-mark proc)))
- deactivate-mark
- (inhibit-read-only t))
- (save-excursion
- (goto-char (process-mark proc))
- ;; `insert-before-markers' just in case the user's next
- ;; command is M-y.
- (insert-before-markers output)
- (set-marker (process-mark proc) (point)))
- (if moving (goto-char (process-mark proc)))))))
-
- ;; If we're in follow mode, do our stuff. Select a new window and
- ;; redisplay. (Actually, it is redundant to check `buf', but I
- ;; feel it's more correct.)
- (if (and buf (window-live-p win))
- (progn
- (set-buffer buf)
- (if (and (boundp 'follow-mode) follow-mode)
- (progn
- (select-window win)
- (let* ((windows (follow-all-followers win))
- (win-start-end (follow-windows-start-end windows))
- (new-window-start (window-start win))
- (new-window-point (window-point win)))
- (cond
- ;; The start of the selected window was repositioned.
- ;; Try to use the original start position and continue
- ;; working with a window to the "right" in the window
- ;; chain. This will create the effect that the output
- ;; starts in one window and continues into the next.
-
- ;; If the display has changed so much that it is not
- ;; possible to keep the original window fixed and still
- ;; display the point then we give up and use the new
- ;; window start.
-
- ;; This case is typically used when the process filter
- ;; tries to reposition the start of the window in order
- ;; to view the tail of the output.
- ((not (eq orig-window-start new-window-start))
- (follow-debug-message "filter: Moved")
- (set-window-start win orig-window-start)
- (follow-redisplay windows win)
- (setq win-start-end (follow-windows-start-end windows))
- (follow-select-if-visible new-window-point
- win-start-end)
- (goto-char new-window-point)
- (if (eq win (selected-window))
- (set-window-start win new-window-start))
- (setq win-start-end (follow-windows-start-end windows)))
- ;; Stick to this window, if point is visible in it.
- ((pos-visible-in-window-p new-window-point)
- (follow-debug-message "filter: Visible in window"))
- ;; Avoid redisplaying the first window. If the
- ;; point is visible at a window below,
- ;; redisplay and select it.
- ((follow-select-if-visible-from-first
- new-window-point windows)
- (follow-debug-message "filter: Seen from first")
- (setq win-start-end
- (follow-windows-start-end windows)))
- ;; None of the above. We stick to the current window.
- (t
- (follow-debug-message "filter: nothing")))
-
- ;; Here we have selected a window. Make sure the
- ;; windows are aligned and the point is visible
- ;; in the selected window.
- (if (and (not (follow-pos-visible
- (point) (selected-window) win-start-end))
- (not return-to-orig-win))
- (progn
- (sit-for 0)
- (setq win-start-end
- (follow-windows-start-end windows))))
-
- (if (or follow-internal-force-redisplay
- (not (follow-windows-aligned-p win-start-end)))
- (follow-redisplay windows)))))))
-
- ;; return to the original window.
- (if return-to-orig-win
- (select-window orig-win))
- ;; Restore the original buffer, unless the filter explicitly
- ;; changed buffer or killed the old buffer.
- (if (and (eq buf (current-buffer))
- (buffer-name old-buffer))
- (set-buffer old-buffer)))
-
- (follow-invalidate-cache)
-
- ;; Normally, if the display has been changed, it is redrawn. All
- ;; windows showing only the end of a buffer are unconditionally
- ;; recentered; we can't prevent that by calling
- ;; `follow-avoid-tail-recenter'.
- ;;
- ;; We force a redisplay here on our own, so Emacs does need to.
- ;; (However, redisplaying when there's input available just seems
- ;; to make things worse, so we exclude that case.)
- (if (and follow-avoid-tail-recenter-p
- (not (input-pending-p)))
- (sit-for 0)))
-
-;;}}}
-
-;;}}}
-;;{{{ Window size change
-
-;; In Emacs 19.29, the functions in `window-size-change-functions' are
-;; called every time a window in a frame changes size. Most notably, it
-;; is called after the frame has been resized.
-;;
-;; We basically call our post-command-hook for every buffer that is
-;; visible in any window in the resized frame, which is in follow-mode.
-;;
-;; Since this function can be called indirectly from
-;; `follow-post-command-hook' we have a potential infinite loop. We
-;; handle this problem by simply not doing anything at all in this
-;; situation. The variable `follow-inside-post-command-hook' contains
-;; information about whether the execution actually is inside the
+;; This handles the case where the user drags the scroll bar of a
+;; non-selected window whose buffer is in Follow mode.
+
+(declare-function scroll-bar-toolkit-scroll "scroll-bar" (event))
+(declare-function scroll-bar-drag "scroll-bar" (event))
+(declare-function scroll-bar-scroll-up "scroll-bar" (event))
+(declare-function scroll-bar-scroll-down "scroll-bar" (event))
+(declare-function mwheel-scroll "mwheel" (event))
+
+(defun follow-scroll-bar-toolkit-scroll (event)
+ (interactive "e")
+ (scroll-bar-toolkit-scroll event)
+ (follow-redraw-after-event event))
+
+(defun follow-scroll-bar-drag (event)
+ (interactive "e")
+ (scroll-bar-drag event)
+ (follow-redraw-after-event event))
+
+(defun follow-scroll-bar-scroll-up (event)
+ (interactive "e")
+ (scroll-bar-scroll-up event)
+ (follow-redraw-after-event event))
+
+(defun follow-scroll-bar-scroll-down (event)
+ (interactive "e")
+ (scroll-bar-scroll-down event)
+ (follow-redraw-after-event event))
+
+(defun follow-mwheel-scroll (event)
+ (interactive "e")
+ (mwheel-scroll event)
+ (follow-redraw-after-event event))
+
+(defun follow-redraw-after-event (event)
+ "Re-align the Follow mode windows affected by EVENT."
+ (let* ((window (nth 0 (event-end event)))
+ (buffer (window-buffer window))
+ (orig-win (selected-window)))
+ (when (and (buffer-local-value 'follow-mode buffer)
+ ;; Ignore the case where we scroll the selected window;
+ ;; that is handled by the post-command hook function.
+ (not (eq window (selected-window))))
+ (select-window window)
+ (follow-redisplay)
+ (unless (eq (window-buffer orig-win) buffer)
+ (select-window orig-win)))))
+
+;;; Window size change
+
+;; The functions in `window-size-change-functions' are called every
+;; time a window in a frame changes size, most notably after the frame
+;; has been resized. We call `follow-post-command-hook' for every
+;; Follow mode buffer visible in any window in the resized frame.
+;;
+;; Since `follow-window-size-change' can be called indirectly from
+;; `follow-post-command-hook' we have a potential infinite loop. To
+;; avoid this, we simply do not do anything in this situation. The
+;; variable `follow-inside-post-command-hook' contains information
+;; about whether the execution actually is inside the
;; post-command-hook or not.
-(if (boundp 'window-size-change-functions)
- (add-hook 'window-size-change-functions 'follow-window-size-change))
-
-
(defun follow-window-size-change (frame)
"Redraw all windows in FRAME, when in Follow mode."
- ;; Below, we call `post-command-hook'. This makes sure that we
- ;; don't start a mutually recursive endless loop.
- (if follow-inside-post-command-hook
- nil
- (let ((buffers '())
- (orig-window (selected-window))
- (orig-buffer (current-buffer))
- (orig-frame (selected-frame))
- windows
- buf)
- (select-frame frame)
- (unwind-protect
- (walk-windows
- (function
- (lambda (win)
- (setq buf (window-buffer win))
- (if (memq buf buffers)
- nil
- (set-buffer buf)
- (if (and (boundp 'follow-mode)
- follow-mode)
- (progn
- (setq windows (follow-all-followers win))
- (if (memq orig-window windows)
- (progn
- ;; Make sure we're redrawing around the
- ;; selected window.
- ;;
- ;; We must be really careful not to do this
- ;; when we are (indirectly) called by
- ;; `post-command-hook'.
- (select-window orig-window)
- (follow-post-command-hook)
- (setq orig-window (selected-window)))
- (follow-redisplay windows win))
- (setq buffers (cons buf buffers))))))))
- (select-frame orig-frame)
- (set-buffer orig-buffer)
- (select-window orig-window)))))
-
-;;}}}
-
-;;{{{ XEmacs isearch
-
-;; In XEmacs, isearch often finds matches in other windows than the
-;; currently selected. However, when exiting the old window
-;; configuration is restored, with the exception of the beginning of
-;; the start of the window for the selected window. This is not much
-;; help for us.
-;;
-;; We overwrite the stored window configuration with the current,
-;; unless we are in `slow-search-mode', i.e. only a few lines
-;; of text is visible.
-
-(if (featurep 'xemacs)
- (defadvice isearch-done (before follow-isearch-done activate)
- (if (and (boundp 'follow-mode)
- follow-mode
- (boundp 'isearch-window-configuration)
- isearch-window-configuration
- (boundp 'isearch-slow-terminal-mode)
- (not isearch-slow-terminal-mode))
- (let ((buf (current-buffer)))
- (setq isearch-window-configuration
- (current-window-configuration))
- (set-buffer buf)))))
-
-;;}}}
-;;{{{ Tail window handling
-
-;; In Emacs (not XEmacs) windows showing nothing are sometimes
-;; recentered. When in Follow mode, this is not desirable for
-;; non-first windows in the window chain. This section tries to
-;; make the windows stay where they should be.
-;;
-;; If the display is updated, all windows starting at (point-max) are
-;; going to be recentered at the next redisplay, unless we do a
-;; read-and-write cycle to update the `force' flag inside the windows.
-;;
-;; In 19.30, a new varible `window-scroll-functions' is called every
-;; time a window is recentered. It is not perfect for our situation,
-;; since when it is called for a tail window, it is to late. However,
-;; if it is called for another window, we can try to update our
-;; windows.
-;;
-;; By patching `sit-for' we can make sure that to catch all explicit
-;; updates initiated by lisp programs. Internal calls, on the other
-;; hand, are not handled.
-;;
-;; Please note that the function `follow-avoid-tail-recenter' is also
-;; called from other places, e.g. `post-command-hook' and
-;; `post-command-idle-hook'.
-
-;; If this function is called it is too late for this window, but
-;; we might save other windows from being recentered.
-
-(if (and follow-avoid-tail-recenter-p (boundp 'window-scroll-functions))
- (add-hook 'window-scroll-functions 'follow-avoid-tail-recenter t))
-
-
-;; This prevents all packages that calls `sit-for' directly
-;; to recenter tail windows.
-
-(if follow-avoid-tail-recenter-p
- (defadvice sit-for (before follow-sit-for activate)
- "Adviced by Follow mode.
-
-Avoid to recenter windows displaying only the end of a file as when
-displaying a short file in two windows, using Follow mode."
- (follow-avoid-tail-recenter)))
-
-
-;; Without this advice, `mouse-drag-region' would start to recenter
-;; tail windows.
-
-(if (and follow-avoid-tail-recenter-p
- (fboundp 'move-overlay))
- (defadvice move-overlay (before follow-move-overlay activate)
- "Adviced by Follow mode.
-Don't recenter windows showing only the end of a buffer.
-This prevents `mouse-drag-region' from messing things up."
- (follow-avoid-tail-recenter)))
-
-;;}}}
-;;{{{ profile support
+ ;; Below, we call `post-command-hook'. Avoid an infloop.
+ (unless follow-inside-post-command-hook
+ (save-current-buffer
+ (let ((orig-frame (selected-frame)))
+ (select-frame frame)
+ (let ((picked-window (selected-window)) ; Note: May change below.
+ (seen-buffers '()))
+ (unwind-protect
+ (walk-windows
+ (lambda (win)
+ (let ((buf (window-buffer win)))
+ (unless (memq buf seen-buffers)
+ (set-buffer buf)
+ (when follow-mode
+ (let ((windows (follow-all-followers win)))
+ (if (not (memq picked-window windows))
+ (follow-redisplay windows win)
+ ;; Make sure we're redrawing around the selected
+ ;; window.
+ (select-window picked-window 'norecord)
+ (follow-post-command-hook)
+ (setq picked-window (selected-window))))
+ (push buf seen-buffers)))))
+ 'no-minibuf)
+ (select-window picked-window 'norecord)))
+ (select-frame orig-frame)))))
+
+(add-hook 'window-scroll-functions 'follow-avoid-tail-recenter t)
+
+;;; Low level window start and end.
+
+;; These routines are the Follow Mode versions of the low level
+;; functions described on page "Window Start and End" of the elisp
+;; manual, e.g. `window-group-start'. The aim is to be able to handle
+;; Follow Mode windows by replacing `window-start' by
+;; `window-group-start', etc.
+
+(defun follow-after-change (_beg _end _old-len)
+ "After change function: set `follow-start-end-invalid'."
+ (setq follow-start-end-invalid t))
+
+(defun follow-window-start (&optional window)
+ "Return position at which display currently starts in the
+Follow Mode group of windows which includes WINDOW.
+
+WINDOW must be a live window and defaults to the selected one.
+This is updated by redisplay or by calling
+`follow-set-window-start'."
+ (let ((windows (follow-all-followers window)))
+ (window-start (car windows))))
+
+(defun follow-window-end (&optional window update)
+ "Return position at which display currently ends in the Follow
+ Mode group of windows which includes WINDOW.
+
+ WINDOW must be a live window and defaults to the selected one.
+ This is updated by redisplay, when it runs to completion.
+ Simply changing the buffer text or setting `window-start' does
+ not update this value.
+
+ Return nil if there is no recorded value. (This can happen if
+ the last redisplay of WINDOW was preempted, and did not
+ finish.) If UPDATE is non-nil, compute the up-to-date position
+ if it isn't already recorded."
+ (let* ((windows (follow-all-followers window))
+ (last (car (last windows))))
+ (when (and update follow-start-end-invalid)
+ (follow-redisplay windows (car windows)))
+ (window-end last update)))
+
+(defun follow-set-window-start (window pos &optional noforce)
+ "Make display in the Follow Mode group of windows which includes
+WINDOW start at position POS in WINDOW's buffer.
+
+WINDOW must be a live window and defaults to the selected one. Return
+POS. Optional third arg NOFORCE non-nil inhibits next redisplay from
+overriding motion of point in order to display at this exact start."
+ (let ((windows (follow-all-followers window)))
+ (setq follow-start-end-invalid t)
+ (set-window-start (car windows) pos noforce)))
+
+(defun follow-pos-visible-in-window-p (&optional pos window partially)
+ "Return non-nil if position POS is currently on the frame in one of
+ the windows in the Follow Mode group which includes WINDOW.
+
+WINDOW must be a live window and defaults to the selected one.
+
+Return nil if that position is scrolled vertically out of view. If a
+character is only partially visible, nil is returned, unless the
+optional argument PARTIALLY is non-nil. If POS is only out of view
+because of horizontal scrolling, return non-nil. If POS is t, it
+specifies the position of the last visible glyph in WINDOW. POS
+defaults to point in WINDOW; WINDOW defaults to the selected window.
+
+If POS is visible, return t if PARTIALLY is nil; if PARTIALLY is non-nil,
+the return value is a list of 2 or 6 elements (X Y [RTOP RBOT ROWH VPOS]),
+where X and Y are the pixel coordinates relative to the top left corner
+of the actual window containing it. The remaining elements are
+omitted if the character after POS is fully visible; otherwise, RTOP
+and RBOT are the number of pixels off-window at the top and bottom of
+the screen line (\"row\") containing POS, ROWH is the visible height
+of that row, and VPOS is the row number \(zero-based)."
+ (let* ((windows (follow-all-followers window))
+ (last (car (last windows))))
+ (when follow-start-end-invalid
+ (follow-redisplay windows (car windows)))
+ (let* ((cache (follow-windows-start-end windows))
+ (last-elt (car (last cache)))
+ our-pos pertinent-elt)
+ (setq pertinent-elt
+ (if (eq pos t)
+ last-elt
+ (setq our-pos (or pos (point)))
+ (catch 'element
+ (while cache
+ (when (< our-pos (nth 2 (car cache)))
+ (throw 'element (car cache)))
+ (setq cache (cdr cache)))
+ last-elt)))
+ (pos-visible-in-window-p our-pos (car pertinent-elt) partially))))
+
+(defun follow-move-to-window-line (arg)
+ "Position point relative to the Follow mode group containing the selected window.
+ARG nil means position point at center of the window group.
+Else, ARG specifies vertical position within the window group;
+zero means top of the first window in the group, negative means
+ relative to bottom of the last window in the group."
+ (let* ((windows (follow-all-followers))
+ (start-end (follow-windows-start-end windows))
+ (rev-start-end (reverse start-end))
+ (lines 0)
+ middle-window elt count)
+ (select-window
+ (cond
+ ((null arg)
+ (setq rev-start-end (nthcdr (/ (length windows) 2) rev-start-end))
+ (prog1 (car (car rev-start-end))
+ (while (setq rev-start-end (cdr rev-start-end))
+ (setq elt (car rev-start-end)
+ count (count-screen-lines (cadr elt) (nth 2 elt)
+ nil (car elt))
+ lines (+ lines count)))))
+ ((>= arg 0)
+ (while (and (cdr start-end)
+ (progn
+ (setq elt (car start-end)
+ count (count-screen-lines (cadr elt) (nth 2 elt)
+ nil (car elt)))
+ (>= arg count)))
+ (setq arg (- arg count)
+ lines (+ lines count)
+ start-end (cdr start-end)))
+ (car (car start-end)))
+ (t ; (< arg 0)
+ (while (and (cadr rev-start-end)
+ (progn
+ (setq elt (car rev-start-end)
+ count (count-lines (cadr elt) (nth 2 elt)))
+ (<= arg (- count))))
+ (setq arg (+ arg count)
+ rev-start-end (cdr rev-start-end)))
+ (prog1 (car (car rev-start-end))
+ (while (setq rev-start-end (cdr rev-start-end))
+ (setq elt (car rev-start-end)
+ count (count-screen-lines (cadr elt) (nth 2 elt)
+ nil (car elt))
+ lines (+ lines count)))))))
+ (+ lines (move-to-window-line arg))))
+
+;;; Profile support
;; The following (non-evaluated) section can be used to
;; profile this package using `elp'.
;;
;; Invalid indentation on purpose!
-(cond (nil
-(setq elp-function-list
- '(window-end
- vertical-motion
- ; sit-for ;; elp can't handle advices...
- follow-mode
- follow-all-followers
- follow-split-followers
- follow-redisplay
- follow-estimate-first-window-start
- follow-calculate-first-window-start-from-above
- follow-calculate-first-window-start-from-below
- follow-calc-win-end
- follow-calc-win-start
- follow-pos-visible
- follow-windows-start-end
- follow-cache-valid-p
- follow-select-if-visible
- follow-select-if-visible-from-first
- follow-windows-aligned-p
- follow-point-visible-all-windows-p
- follow-avoid-tail-recenter
- follow-update-window-start
- follow-post-command-hook
- ))))
-
-;;}}}
-
-;;{{{ The end
-
-(defun follow-unload-function ()
- "Unload Follow mode library."
- (easy-menu-remove-item nil '("Tools") "Follow")
- (follow-stop-intercept-process-output)
- (dolist (group '((before
- ;; XEmacs
- isearch-done
- ;; both
- set-process-filter sit-for move-overlay)
- (after
- ;; Emacs
- scroll-bar-drag scroll-bar-drag-1 scroll-bar-scroll-down
- scroll-bar-scroll-up scroll-bar-set-window-start
- ;; XEmacs
- scrollbar-line-down scrollbar-line-up scrollbar-page-down
- scrollbar-page-up scrollbar-to-bottom scrollbar-to-top
- scrollbar-vertical-drag
- ;; both
- process-filter)))
- (let ((class (car group)))
- (dolist (fun (cdr group))
- (when (functionp fun)
- (condition-case nil
- (progn
- (ad-remove-advice fun class
- (intern (concat "follow-" (symbol-name fun))))
- (ad-update fun))
- (error nil))))))
- ;; continue standard processing
- nil)
-
-;;
-;; We're done!
-;;
+;; (setq elp-function-list
+;; '(window-end
+;; vertical-motion
+;; follow-mode
+;; follow-all-followers
+;; follow-split-followers
+;; follow-redisplay
+;; follow-estimate-first-window-start
+;; follow-calculate-first-window-start-from-above
+;; follow-calculate-first-window-start-from-below
+;; follow-calc-win-end
+;; follow-calc-win-start
+;; follow-pos-visible
+;; follow-windows-start-end
+;; follow-cache-valid-p
+;; follow-select-if-visible
+;; follow-select-if-visible-from-first
+;; follow-windows-aligned-p
+;; follow-point-visible-all-windows-p
+;; follow-avoid-tail-recenter
+;; follow-update-window-start
+;; follow-post-command-hook))
(provide 'follow)
-;;}}}
-
;; /------------------------------------------------------------------------\
;; | "I [..] am rarely happier then when spending an entire day programming |
;; | my computer to perform automatically a task that it would otherwise |